Which is the best bearings for glider rocker?
Finding your suitable bearings for glider rocker is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best bearings for glider rocker including detail information and customer reviews. Let’s find out which is your favorite one.
1. Glider Rocker Bearings, Set of 8
Feature
OD 1-1/8''Hole threaded for a 3/8'' bolt
(8) SET
Description
This bearing fits on many type of glider rocker chairs. The diameter is 1-1/8''. The hole is for a 3/8'' bolt and is threaded. Check before ordering if it is the right model for your chair. Price is for the full set of (8) bearings.2. XiKe 8 Pack Stem Rocker Assembly Bearing 1-1/8" OD, Glider and Rocker Hardware, Furniture and Miscellaneous, with Mounting Hardware Bearing, Replace 124094.
Feature
SIMPIE - Quick Installation to Repair and New Works.BEARING - Souble Shield to Prevent Impurities From Entering.
SIZE - Bearing Diameter 1-1/8", Thread Length on Bolt 7/8".
INCLUDE - Bearings and Screw Assemblies, Nuts, Washers, Self Tapping.
For Detailed Dimensions, See Product Description.
Description
XiKe Bearings USA is the only shop with united states XiKe brand license.We sales high-quality bearings, pillow block, repair kits, steel balls and bearing related parts.
Provide professional selection guidance, technical information and maintenance knowledge and so on.
Reduce maintenance costs and replacement frequency, create more value for you.
Total Length: 1-1/2"
Screw Length: 8/7"
Screw Diameter: 8/3"
Nut Thickness: 5/16"
Gasket Thickness: 3/32"
Gasket Diameter: 8/7"
Bearing Type: R8ZZ
Bearing Flange OD: 1-1/4"
Bearing Flange Width: 1/16"
Bearing Outer Diameter: 1-1/8"
Bearing Seal: Double Shield
Bearing Grease: Standard Fill
Simple to install on restorations or new construction. You can restore an old rocker or build a virtually maintenance free base for your new chair or ottoman with Platte River glider/rocker hardware: Individual ball bearing assemblies are precision ground and pre-lubricated for long life. Each assembly consists of a 1-1/8" diameter flanged bearing with a 1-7/16" long x 3/8-16 threaded shaft. Two flat washers, three mounting screws and a jamb nut are also included. Thin profile allows mounting in 3/4" stock. Bearings are sold each. Construction of a glider rocker base requires 8 bearings. Assemblies mounted in Red Oak frames held static loads up to 700 pounds.---
3. Glider Rocker Bearings, Set of 8
Feature
OD 7/8''Hole is threaded for a 5/16'' bolt
(8) SET
Description
This bearing fits on many type of glider rocker chairs. The diameter is 7/8''. The hole is for a 5/16'' bolt and is filleted. Check before ordering if it is the right model for your chair. Price is for the full set of (8) bearings.4. Glider Rocker Bearings, Set of 8
Description
The diameter is 1-1/8''. The stud is 3/8''. Check before ordering if it is the right model for your chair. Price is for the full set of (8) bearings.5. XiKe 2 Pack Stem Rocker Assembly Bearing 1-1/8" OD, Glider and Rocker Hardware, Furniture and Miscellaneous, with Mounting Hardware Bearing, Replace 124094.
Feature
SIMPIE - Quick Installation to Repair and New Works.BEARING - Souble Shield to Prevent Impurities From Entering.
SIZE - Bearing Diameter 1-1/8", Thread Length on Bolt 7/8".
INCLUDE - Bearings and Screw Assemblies, Nuts, Washers, Self Tapping.
For Detailed Dimensions, See Product Description.
Description
XiKe Bearings USA is the only shop with united states XiKe brand license.We sales high-quality bearings, pillow block, repair kits, steel balls and bearing related parts.
Provide professional selection guidance, technical information and maintenance knowledge and so on.
Reduce maintenance costs and replacement frequency, create more value for you.
Total Length: 1-1/2"
Screw Length: 8/7"
Screw Diameter: 8/3"
Nut Thickness: 5/16"
Gasket Thickness: 3/32"
Gasket Diameter: 8/7"
Bearing Type: R8ZZ
Bearing Flange OD: 1-1/4"
Bearing Flange Width: 1/16"
Bearing Outer Diameter: 1-1/8"
Bearing Seal: Double Shield
Bearing Grease: Standard Fill
Simple to install on restorations or new construction. You can restore an old rocker or build a virtually maintenance free base for your new chair or ottoman with Platte River glider/rocker hardware: Individual ball bearing assemblies are precision ground and pre-lubricated for long life. Each assembly consists of a 1-1/8" diameter flanged bearing with a 1-7/16" long x 3/8-16 threaded shaft. Two flat washers, three mounting screws and a jamb nut are also included. Thin profile allows mounting in 3/4" stock. Bearings are sold each. Construction of a glider rocker base requires 8 bearings. Assemblies mounted in Red Oak frames held static loads up to 700 pounds.22
6. Glider Rocker Bearings, Set of 8
Feature
OD 1-1/8''Hole for a 3/8'' bolt and is not threaded
(8) SET
Description
This bearing fits on many type of glider rocker chairs. The diameter is 1-1/8''. The hole is for a 3/8'' bolt and is not filleted. Check before ordering if it is the right model for your chair. Price is for the full set of (8) bearings.7. Stem Rocker Bearing Assembly Bearing 1-1/8" OD, Rocker Bearing, (Set of 8)
Feature
Use for Indoor RockersBearing OD 1-1/8"
Thread length on bolt 7/8"
Mounting hardware assembly - screws, washers, nut
The OD is 1-1/8" for this listing also comes in 7/8"OD see other listing
Description
Stem bearings are perfect for rockers and gliders. Simple installation on new or restoration chair. The rocker bearings come in two sizes, THIS LISTING IS FOR THE OD 1-1/8"", we also have a smaller OD 7/8". The rocker bearings are sold with and with mounting hardware. This listing is for the 1-1/8"" OD bearing with hardware. See our other listings for without hardware.8. Platte River 124094, 8-pack, Hardware, Furniture, Miscellaneous, Glider/Rocker Bearing Assembly Only
Feature
Simple to install on restorations or new construction.Specifications: Finish=NATURAL, Material=STEEL, Diameter=1-1/8 in
Specifications: Inside Diameter=3/8 in, Overall Length=1-7/16 in, Thickness=3/8 in
Description
Simple to install on restorations or new construction. You can restore an old rocker or build a virtually maintenance free base for your new chair or ottoman with Platte River glider/rocker hardware: Individual ball bearing assemblies are precision ground and pre-lubricated for long life. Each assembly consists of a 1-1/8" diameter flanged bearing with a 1-7/16" long x 3/8-16 threaded shaft. Two flat washers, three mounting screws and a jamb nut are also included. Thin profile allows mounting in 3/4" stock. Bearings are sold each. Construction of a glider rocker base requires 8 bearings. Assemblies mounted in Red Oak frames held static loads up to 700 pounds.9. Glider Rocker Bearings, Set of 8
Feature
OD 7/8''Stud 5-16'' x 3/4'' L
Be carefull some bearings look like this one but are longer.
(8) SET
Description
This bearing fits on many type of glider rocker chairs. The diameter is 7/8''. The stud is 5/16''x 3/4''L. Check before ordering if it is the right model for your chair. Price is for the full set of (8) bearings.10. Platte River 124094, Hardware, Furniture, Miscellaneous, Glider/Rocker Bearing Assembly Only
Feature
Simple to install on restorations or new construction.Specifications: Finish=NATURAL, Material=STEEL, Diameter=1-1/8 in
Specifications: Inside Diameter=3/8 in, Overall Length=1-7/16 in, Thickness=3/8 in
Recent Comments