Top 10 recommendation solenoid pneumatic for 2018
When you looking for solenoid pneumatic, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable solenoid pneumatic is not an easy task. In this post, we show you how to find the right solenoid pneumatic along with our top-rated reviews. Please check out our suggestions to find the best solenoid pneumatic for you.
1. Baomain Pneumatic Air Control Solenoid Valve 4V210-08 DC 12V 5 Way 2 Position PT1/4" Internally Piloted Acting Type Single Electrical Control
Feature
Model : 4V210-08; Operation Type : Internally Piloted Acting TypeType: 2 Position 5 Way; Power Consumption : DC 12V; Operating Pressure: 0.15 ~ 0.8MPa
Position & Way Number : Two-position, Five-way; Female Thread Port Diameter : 11.4mm / 0.448", 8.5mm / 0.334";Joint Pipe Bore : Inlet=Outlet=1/4''
Total Size(Approx) : 110 x 66 x 22mm / 4.33" x 2.6" x 0.86" (L*W*H)
Weight : 205g; Package Content : 1 x Solenoid Valve
Description
2. 1/4" NPT 5 Way 2 Position Pneumatic Electric Solenoid Valve DC 24 V
Feature
U.S. Solid Pneumatic Valve- Industrial Grade Product.DC 24 V 5/2 Valve with 1/4" NPT Aperture
Versatile, Small, Responsive, Light, and Durable.
SHIPS FROM CLEVELAND, OHIO
EXPEDITED SHIPPING AVAILABLE
Description
Pneumatic types of solenoid valves can be found in a wide array of industries. Aircrafts use pneumatic valves to control the pressure and flow of hot engine air to the windshield for the anti-icing and rain removal. Food and beverage manufacturers use them to make, dispense or preserve food and beverage products. This is the U.S. Solid 1/4" 5 way 2 Position Pneumatic Electric Solenoid Valve. It is a switch for sending air to any pneumatic device, usually an actuator, letting a relatively small signal to power a large device. It is also the interface between electronic controllers and pneumatic systems. It allows pneumatic control of position, flow, pressure and temperature. This particular valve is a 5/2 valve which means it has 5 ports; 2 exhaust ports through which air is regulated as it flows out, 2 power ports that power the system, 1 supply port for the inlet of air pressure, and 2 flow positions. This valve is made with an aluminum alloy and has an aperture of 1/4" NPT. U.S. Solid pneumatic valves are reliable, low power consuming, and have long life.Specifications:
Brand U.S. Solid
SKU: JFPSV00011
GTIN-12 (U.P.C.) 888107024583
U.S. Solid Model: USS- PSV00011
Valve Type: 2 Position 5 Way
Thread Type: NPT
Operation/ Property: Normally Closed
Material: Aluminum Alloy
Size:: 1/4"
Effective Section Area (mm): 16
Voltage: DC 24 V
Applicable Media: Filtered Air
Flow Value (Cv): 0.89
Insulation & Protection: Class F; IP 65
Working Pressure: 0.15 ~ 0.8 Mpa
Max. Pressure Resistance: 1.2 Mpa
Direct Operated/ Pilot Operated: Pilot Acting
Operation Temperature: 5 ~ 50
3. 1/4" NPT 5 way 2 Position Pneumatic Electric Solenoid Valve DC 12 V
Feature
U.S. Solid Pneumatic Valve- Industrial Grade Product5/2 Valve with 1/4" NPT Aperture (inlet/outlet: A=B=P=1/4"; exhaust port: R=S=1/8")
Voltage: DC 12 V
Versatile, Small, Responsive, Light, and Durable
SHIPS FROM CLEVELAND, OHIO - EXPEDITED SHIPPING AVAILABLE
Description
Pneumatic types of valves can be found in a wide array of industries. The transportation industry has many uses for them; motorcycle & ATV air ride suspension systems, door opening systems on buses, and garbage truck lift mechanisms just to name a few. They are also found in air lift devices like forklifts. This is the U.S. Solid 1/4"NPT 5 way 2 Position Pneumatic Electric Solenoid Valve. It is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control a large device. It is also the interface between electronic controllers and pneumatic systems. This valve allows pneumatic control of position, flow, pressure and temperature. This valve is a 5/2 valve which means it has 5 ports; two 1/8" exhaust ports through which air is regulated as it flows out, two 1/4" power ports that power the system, 1/4" supply port for the inlet of air pressure, and 2 flow positions. This valve is made with an aluminum alloy and has an aperture of 1/4". U.S. Solid pneumatic valves offer reliability, low power consumption, and have a long life.Specifications:
Brand U.S. Solid
SKU: JFPSV00034
GTIN-12 (U.P.C.) 888107070917
U.S. Solid Model: USS- PSV00034
Valve Type: 2 Position 5 Way
Thread Type: NPT
Operation/ Property: Normally Closed
Size:: 1/4"
Voltage: DC 12 V
Applicable Media: Filtered Air
Effective Section Area (mm): 16
Flow Value (Cv): 0.89
Insulation & Protection: Class F; IP 65
Working Pressure: 0.15 ~ 0.8 Mpa
Max. Pressure Resistance: 1.2 Mpa
Direct Operated/ Pilot Operated: Pilot Acting
Operation Temperature: -5 ~ 50
<4. 1/4" NPT Pneumatic Electric Solenoid Valve 3 Way 2 Position DC 24V
Feature
U.S. Solid Pneumatic Valve- Industrial Grade Product3/2 Valve with 1/4" NPT Aperture
Voltage: DC 24 V
Versatile, Small, Responsive, Light, and Durable
SHIPS FROM CLEVELAND, OHIO -EXPEDITED SHIPPING AVAILABLE
Description
Pneumatic types of valves can be found in a wide array of industries. Food and beverage manufacturers use them to make, dispense or preserve food and beverage products. Manufacturing machines use pneumatic valve because they are ideal for automation. The U.S. Solid 1/4" NPT 3 way 2 Position Pneumatic Electric Solenoid Valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control a large device. It is also the interface between electronic controllers and pneumatic systems. This valve allows pneumatic control of position, flow, pressure and temperature.
This valve is a 3/2 valve which means the valve has three port connections and two flow positions. One valve seal always remains open and the other closed in the de-energized mode. When the coil is energized, the mode reverses. Either the compressed air flows from port 1 to port 2 through the valve, or 1 is blocked while port 2 is exhausted via port 3. This valve is made with an aluminum alloy and has an aperture of 1/4" NPT.
Specifications:
Brand U.S. SOLID
Model: USS- PSV00042
Valve Type: 2 Position 3 Way
Thread Type: NPT
Operation/ Property: Normally Closed
Material: Aluminum Alloy
Size: 1/4"
Voltage: DC 24 V
Applicable Media: Filtered Air
Effective Section Area (mm): 16
Flow Value (Cv): 0.89
Insulation & Protection: Class F; IP 65
Working Pressure: 0.15 ~ 0.8 Mpa
Max. Pressure Resistance: 1.2 Mpa
Direct Operated/ Pilot Operated: Pilot
Operation Temperature: -5 ~ 50
Package Weight: 7.6 oz.
Package Dimensions: 5.5" x 2.75" x 1"
5. 1/4" NPT 3 Way 2 Position Pneumatic Electric Solenoid Valve DC 12 V
Feature
U.S. Solid Pneumatic Valve- Industrial Grade Product3/2 Valve with 1/4" NPTAperture
Voltage: DC 12 V
Versatile, Small, Responsive, Light, and Durable
SHIPS FROM CLEVELAND, OHIO -EXPEDITED SHIPPING AVAILABLE
Description
Pneumatic types of valves can be found in a wide array of industries. Food and beverage manufacturers use them to make, dispense or preserve food and beverage products. Manufacturing machines use pneumatic valve because they are ideal for automation.The U.S. Solid 1/4" NPT 3 way 2 Position Pneumatic Electric Solenoid Valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control a large device. It is also the interface between electronic controllers and pneumatic systems. This valve allows pneumatic control of position, flow, pressure and temperature.This valve is a 3/2 valve which means the valve has three port connections and two flow positions. One valve seal always remains open and the other closed in the de-energized mode. When the coil is energized, the mode reverses. Either the compressed air flows from port 1 to port 2 through the valve, or 1 is blocked while port 2 is exhausted via port 3. This valve is made with an aluminum alloy and has an aperture of 1/4".
Specifications:
Brand U.S. SOLID
Model: USS- PSV00032
Valve Type: 2 Position 3 Way
Thread Type: NPT
Operation/ Property: Normally Closed
Material: Aluminum Alloy
Size: 1/4"
Voltage: DC 12 V
Applicable Media: Filtered Air
Effective Section Area (mm): 16
Flow Value (Cv): 0.89
Insulation & Protection: Class F; IP 65
Working Pressure: 0.15 ~ 0.8 Mpa
Max. Pressure Resistance: 1.2 Mpa
Direct Operated/ Pilot Operated: Pilot
Operation Temperature: -5 ~ 50
Package Weight: 7.6 oz.
Package Dimensions: 5.5" x 2.75" x 1"
6. Baomain 4V210-08 DC 12V Single Head 2 Position 5 Way 4 Pneumatic Solenoid Valve w Base
Feature
Model : 4V210-08; Working Voltage : DC 12VPosition & Way Number : 2 Position 5 Way;
Quick Fitting Inner Dia.: Base Part Fitting size 8mm, Solenoid valve fitting size: 6mm
Mounted Hole Dia. : 4mm/ 5/32"; Total Size : 153 x 117 x 90mm/6'' x 4.6'' x 3.5'' (L*W*H)
Weight : 1079g; Package Content : 1 x 4 Solenoid Valve w Base Muffler
Description
7. 1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve
Feature
Valve Type: 2 Way Normally Closed (Valve opens with energized)Port Size: 1/4" Female Port
Coil Voltage: DC12V
Service Media: Air, Gas, Liquid, Water
Operation Model: Direct Acting; Flow Model: Uni-Directional
Description
Valve Type: 2 Way Normally Closed (Valve opens with energized)
Port Size: 1/4" Female Port
Coil Voltage: AC220V, DC24V, DC12V
Service Media: Air, Gas, Liquid, Water
Operation Model: Direct Acting
Flow Model: Uni-Directional
Flow Rate: 0.23Cv (Fluid Flow), 22 SCFM at 100 PSI (Air Flow)
Operating Pressure: 0 - 0.8Mpa(can be operated at 0 PSI (Vacuum))
8. SNS 2W025-08 1/4" AC110V NPT Brass Electric Solenoid Valve Normally Closed Water, Air, Diesel
Feature
2 way solenoid valve, 14/" NPT port, brass body, AC110 voltHigh quality normally closed electric solenoid valve, for water, air or oil
Working temperature range: -5-85
It's applicable in many fields: Irrigation controls (garden, farm,etc.), liquid controls ( pipeline, artificial river etc. and air controls ( lab, factory, etc.)
We have solenoids available in AC/DC and various size NPT threads as well
9. Baomain 4V210-08 DC 24V Single Head 2 Position 5 Way 4 Pneumatic Solenoid Valve w Base
Feature
Model : 4V210-08; Working Pressure : 0.15~0.8Mpa; Working Voltage : DC 24VPosition & Way Number : 2 Position 5 Way; Joint Pipe Point : Inlet=Outlet=1/2" Exhaust=1/5" : Exhaust=1/5"
Base Size : 11.3 x 5.9 x 2.3cm/ 4.4" x 2.3" x 0.9"(LW*T); Quick Fitting Size : 12.5 x 6 x 19mm/ 1/2" x 15/64"x 7/10"(Thread D * Blue End D* L)
Muffler Size : 12.5 x 28.5mm/ 1/2" x 1 1/10"(Thread D* L); Mounted Hole Dia. : 4mm/ 5/32"; Total Size : 11.8 x 15 x 9cm/ 4.6'' x 5.9'' x 3.9"(L*W*H)
Quick Fitting Inner Dia. : Solenoid Valve: 0.6cm/15/64"; Base: 0.8cm/5/16"; Net Weight : 1008g;Package Content : 1 x Solenoid Valve Set
Description
10. 4H210-085 Way Pneumatic Air Hand Lever Operated Valve Solenoid Valve Port 1/4" Manual Control Valves
Feature
Hand Lever Operated Pneumatic ValveModel: 4H210-08
Thread Size: PT 1/4"
Valve Type: 5 Port 2 Position
Control Type: Hand return
Description
Specification:100% Brand new, never used
Model: 4H210-08
Thread Size: PT 1/4"
Flow aperture: 16mm
Operating temperature: -5-55 C
CV values: 0.89
Control Type: Hand return
Valve Type: 5 Port 2 Position
Main parts material: Aluminum alloy
Seal material: NBR
Working pressure: 1.5-8 kgf / cm
Weight: 180g
Package Included:
1 x Hand Lever Operated Pneumatic Valve
Recent Comments