Top 10 dc motor for robotics
If you looking for dc motor for robotics then you are right place. We are searching for the best dc motor for robotics on the market and analyze these products to provide you the best choice.
1. EMO 4 wheel 2 layer Robot Smart Car Chassis Kits with Speed Encoder for Arduino DIY
Feature
Mechanical structure is simple, very easy to install4 DC gear motors, flexible turning, Chassis is stability and very easy to expand
Four tachometer encoder. Can be used for distance measurement, velocity
Motor reduction ratio of 48:1
With the measured encoder in 7.2V rechargeable battery powered case, speed is about 0.65M/S. Of course, improve the voltage can improve its speed, motor operating voltage is between 5-10V
Description
Double layer structure, much of mounting holes, enough spaceEasy to install a variety of control panels, sensorsFour tachometer encoderCan be used for distance measurement, velocityEducational toys,Ideal for DIY platform2. KEYESTUDIO DC Motor Toy Wheel Kit for Arduino Robot Smart Car, 4 x TT Motor 3-6V Uniaxial DC Gear Motor with 4X Robot Wheels for DIY Toys
Feature
Operating voltage: 3V~12V DC (recommended operating voltage of about 6 to 8V)Maximum torque: 800gf cm min (when it is 3V)
No-load speed: 1:48; RPM:200(when it is 4.5V); Load current: 170mA (when it is 4.5V)
This Mini Electric Motor is a general purpose motor, work with batteries or solar cells perfectly
Car wheel Size: 69mm(outer diameter), 26mm(thickness), 46mm(inter diameter)
Description
Specification:Single Shaft TT Motor
size: refer to the picture above
Operating voltage: 3V~12V DC (recommended operating voltage of about 6 to 8V)
Maximum torque: 800gf cm min (when it is 3V)
No-load speed: 1:48
RPM:200(when it is 4.5V)
Load current: 170mA (when it is 4.5V)
This Mini Electric Motor is a general purpose motor, work with batteries or solar cells perfectly Great replacement for the rusty or damaged DC gear motor on the machine.
Used for electronic fans, electronic machine, toys, cars, robots, arduino projects, etc
With EMC, it has strong anti-interference ability and causes no interference to micro-controller
Package included:
4 x Plastic Tire Wheels
4 x DC Gear Motors
8 x M3*8 screws
8 x M3*30 screws
8 x M3 nuts for fixing
4 x TT DC motor Support
8 x 200mm connector wires
Note: Small parts, keep them far away from children under 3 years
3. 6 Set DC Motor Kit, Rectangular Mini Electric Motor 1.5-3V 24000RPM with 82 Pcs Plastic Gears,Electronic Wire, Boat Rocker Switch,2xAA Battery Holder,Motor Mounting Bracket for DIY Science Projects
Feature
Pay attention: Please read the instructions or pictures carefully, use the correct circuit diagram to avoid short circuitMini Motor Voltage:DC 3V;Rated Speed:24000 RPM
Motor Body Diameter:27mm/1.06",Length;38mm/1.46";Mounting Hole Distance(center to center):15mm/0.59",Shaft Size:10x2.0mm/0.39"x0.08"(L*D)
Perfect for mini fan,electric toys and science experiments etc.Will work with many power sources batteries and solar cells work perfectly
Package including: 6x DC motor,6x rocker switch,6x battery holder,6x motor mounting Bracket,20x Electronic wire,82pcs plastic gears(Random Color) and 100cm2 Heat shrink tube
Description
Poraxy DC Motor Set-,6pcs 3.0 volt 24000 RPM motors, 6pcs Boat Rocker Switches and 6pcs Battery Holder Case and 6pcs Motor Mounting Bracket Holder per package.Can work with many power sources-batteries and solar cells work perfectly.Great fun Motor,perfect for mini fan,electric toys and science experiments etc.Ages 6 and up.Features:
-Color:Siler+Black
-Voltage:DC 3V
-Rated Speed:24000 RPM
-Motor Body Length;38mm/1.46"
-Motor Body Diameter:27mm/1.06"
-Shaft Size:10x2.0mm/0.39"x0.08"(L*D)
-Mounting Hole Distance(center to center):15mm/0.59"
-Will work with many power sources batteries and solar cells work perfectly
-Great fun,perfect for science experiments and projects with electricity
Package including:
6 x DC Motor 3V 24000 RPM
6 x Boat Rocker Switch
20 X wires10pcs/red,10pcs/black)
6 X 2 x 1.5V AA Battery Holder Case
6 X DC Motor Mounting Bracket Holder
1X 100cm 2 Heat shrink tube
82pcs plastic gears(Random Color)
CHOKING HAZARDSmall parts. Not for children under 3 yrs.
4. EUDAX 6 Set DC Motors Kit, Mini Electric Hobby Motor 3V -12V 25000 RPM Strong Magnetic with 86Pcs Plastic Gears, 9V Battery Clip Connector,Boat Rocker Switch,Shaft Propeller for DIY Science Projects
Feature
Pay attention: Please read the instructions or pictures carefully, use the correct circuit diagram to avoid short circuit, short circuit will produce high temperature and Causing accessory damageShaft Propeller Aperture:2mm/0.078"; Diameter:80mm/3.15"; Number of vane:4 vane and 3 vane;colour:Red & Blue & Yellow
DC Motors Color:Siler+Red;Voltage:DC 3V-12V;No-load speed: 9000RPM- 25000RPM 10%; Motor Body Diameter:27mm/1.06";Shaft Size:10x2.0mm/0.39"x0.08"(L*D);Motor Body Length;38mm/1.46"
High torque Strong magnetic Carbon brush 130 MOTOR, can be used for Mini Hair Dryer and DIY Remote Control Toy Car.
Package including:6pcs DC motor,6pcs 9V Battery Clip Connector,6pcs motor mounting bracket,6pcs boat rocker switches,12pcs x electronic wire(25cm),86 pcs plastic gears(Random Color) 4 pcs 4 vanes propeller,2pcs 3 vanes propeller and 40cm3 Heat shrink tube
Description
Description:This is micro 130 motor with red rear cover, which is a Strong Magnetic motor with high torque and high speed.Can use 3V 4.5V 6V 9V 12V power to drive.
High torque Strong magnetic Carbon brush 130 Motor, can be used for Mini Hair Dryer and DIY Remote Control Toy Car.
Suitable age:Ages 6 and up.
Technical Parameters:
Rated Voltage: 3V-12V DC
Rated Speed:9000 -25000 RPM (3V-12V)
Color:Siler+Red;
Motor Body Diameter:27mm/1.06"";
Shaft Size:10x2.0mm/0.39""x0.08""(L*D);
Motor Body Length;38mm/1.46""
Output Shaft: 2.0mm
Length of Output Shaft: 7.5mm
Height of Motor: 25mm
Motor Dimension: 15 * 20mm
Package including:
6 x Strong Magnetic DC Motor 3V -12V 25000 RPM
6 x Rocker Switches
6 X 9V Battery Clip Connector
6 X DC Motor Mounting Bracket Holder
12 X wires (25cm;6pcs/Black,6pcs/Red)
1X 40 cm 2 Heat shrink tube
86pcs plastic gears(Random Color)
4 X2mm shaft propeller with 4 Vanes(Red&Blue)
2 X2mm shaft propeller with 3 Vanes(Yellow&Red)
CHOKING HAZARDSmall parts. Not for children under 3 yrs.
5. uxcell DC 24V 350RPM Encoder Gear Motor with Mounting Bracket 65mm Wheel Kit 1 Set for Smart Car Robot DIY
Feature
Rated Voltage: DC 24V ; Speed: 350 RPM ;Motor Size: 25mm x 70mm/ 0.98in x 2.77in(D*L); Wheel Size: 65mm x 26mm/ 2.56in x 1.03in(D*T)
Great replacement for self-balancing smart robot car.
This kit is made for beginners to teach them about programming, electronics and robotics.
Package Content:1 x DC Gear Motor , 1 x Wheel , 1 x Bracket, several installation parts.
Description
Specifications:Model : GM25-370
Rated Voltage: DC 24V
Speed: 350 RPM
Wire : 6 Wires
Wire Length: 19cm
Shaft Type: D-Shape
Shaft Size: 4mm x 9.5mm/ 0.16in x 0.37in(D*L)
Motor Size: 25mm x 70mm/ 0.98in x 2.77in(D*L)
Wheel Size: 65mm x 26mm/ 2.56in x 1.03in(D*T)
Features:
2 terminal connector, cylinderical gear motor with a 6 ways encoder.
6 Ways: C1 Encoder A Phase and B Phase, Motor Power Supply Nagetive and Passive, Encoder Power Supply Nagetive and Passive.
Great replacement for the rusty or damaged DC gear motor on the machine.
Package Content:
1 x DC Gear Motor
1 x Wheel
1 x Bracket
6. DC Gearbox Motor TT Motor 200RPM Tire Wheel DC 3-6V for Arduino Smart Car 1:48 Male Connector (pack of 2 sets)
Feature
This is a TT DC Gearbox Motor with a gear ratio of 1:48, and it comes with 2 x 200mm 28AWG wires with breadboard-friendly 2.54mm(0.1") male connectors. Perfect for plugging into a breadboard or terminal blocksRated Voltage: 3~6V, Continuous No-Load Current: 150mA +/- 10%
Min. Operating Speed (3V): 90+/- 10% RPM, Min. Operating Speed (6V): 200+/- 10% RPM
Torque: 0.15Nm ~0.60Nm, Stall Torque (6V): 0.8kg.cm, Gear Ratio: 1:48
Warranty: one year warranty, any question please contact before dispute or negative feedback
Description
TT Motor Description:This is a TT DC Gearbox Motor with a gear ratio of 1:48, and it comes with 2 x 200mm wires with breadboard-friendly 2.54mm(0.1") male connectors. Perfect for plugging into a breadboard or terminal blocks
Rated Voltage: 3~6V
Continuous No-Load Current: 150mA +/- 10%
Min. Operating Speed (3V): 90+/- 10% RPM
Min. Operating Speed (6V): 200+/- 10% RPM
Torque: 0.15Nm ~0.60Nm
Stall Torque (6V): 0.8kg.cm
Gear Ratio: 1:48
Body Dimensions: 70 x 22 x 18mm
Wires Length: 200mm 28 AWG
Product Weight: 29g / 1.02oz
Wheel Feature:
Wheel diameter: 65mm
Wheel thickness: 28mm
Package Includes:
2 X DC Gearbox Motor TT Motor
2 X Wheel
7. EUDAX 6 set Rectangular Mini Electric 1.5-3V 24000RPM DC Motor with 84 Pcs Plastic Gears,Electronic wire, 2 x AA Battery Holder,Motor Mounting Bracket,Boat Rocker Switch for DIY Science Projects
Feature
Pay attention: Please read the instructions or pictures carefully, use the correct circuit diagram to avoid short circuit, short circuit will produce high temperature and cause the battery Holder box to meltColor:Siler+Black;Voltage:DC 3V;Rated Speed:24000 RPM
Motor Body Diameter:27mm/1.06";Mounting Hole Distance(center to center):15mm/0.59",Shaft Size:10x2.0mm/0.39"x0.08"(L*D);Motor Body Length;38mm/1.46"
Great fun Motor,perfect for mini fan,electric toys and science experiments etc.Will work with many power sources batteries and solar cells work perfectly
Package including:6pcs DC motor,6pcs battery holder,6pcs rocker switch,6pcs motor mounting Bracket,12pcs 9.8" Electronic wire,84pcs plastic gears(Random Color) and 40cm 3 Heat shrink tube
Description
Pay attention:Please read the instructions or pictures carefully, use the correct circuit diagram to avoid short circuit, short circuit will produce high temperature and cause the battery Holder box to melt
Description:
DC Motors-3.0 volt 24000 RPM,6pcs motors and 6pcs Battery Holder Case and 6pcs Motor Mounting Bracket Holder per package.Can work with many power sources-batteries and solar cells work perfectly.Great fun Motor,perfect for mini fan,electric toys and science experiments etc.Ages 6 and up.
Features:
-Color:Siler+Black
-Voltage:DC 3V
-Rated Speed:24000 RPM
-Motor Body Length;38mm/1.46"
-Motor Body Diameter:27mm/1.06"
-Shaft Size:10x2.0mm/0.39"x0.08"(L*D)
-Mounting Hole Distance(center to center):15mm/0.59"
-Will work with many power sources batteries and solar cells work perfectly
-Great fun,perfect for science experiments and projects with electricity
Package including:
6 x DC Motor 3V 24000 RPM
12 X 9.8in/25cm wires6pcs/red,6pcs/black)
6 X 2 x 1.5V AA Battery Holder Case
6 X DC Motor Mounting Bracket Holder
6 X 3A/250V 6A/125V 2 Solder Lug SPST On/Off Mini Boat Rocker Switch
40cm 3 Heat shrink tube
84pcs plastic gears(Random Color)
CHOKING HAZARDSmall parts. Not for children under 3 yrs.
8. IS Icstation Electronic DIY Smart Tracking Car Assemble Soldering Kit, Robotics Set with DC Motor Science School Educational Tool
Feature
Icstation robot car is widely used in school electronics science education competitions, for learning about the basic knowledge of DIY soldering project, DC motor, mechanical, electronic science, sensor principle, automatic control etc.This DIY robotics kit is easy to assemble and solder, designed to help kids, electronic hobbyist and beginners to learn about basic knowledge of soldering simple circuits, photoelectric sensor circuit, voltage cooperator, motor driving, infrared sensor, C51 MCU, etc., teaching through lively activities, and inspire the interest in learning.
Smart tracking car is based on the principle of the light reflectivity difference, when light emitting on the white and black items, the red LED and photoreceptor as the sensoring circuit to control the car running direction automatically, a photoresistance resistance is used to tell robot car whether it's on the right way or not, and run directly along the black tracking line.
Motor: 2 pcs stepping motors, Tracking Line Width: 16 mm / 0.63 inch, you can use the 1.5~2.0 cm black electrical tape on the ground to design the multifarious runway. Power Supply: AA battery (not included).
Find the English PDF User Manual in the Product information - Technical Specification - Installation Manual [pdf]
Description
Icstation tracking robot car is widely used in school robotics and electronics education competitions, you can have a lot of fun and learning putting this robotics kit together and understanding the theory behind the way the Light Dependent Resistors detect the difference between the black of the line and the white of the area outside the line, if you're helping a youngster put this kit together you can instruct them in reading the resistor codes or using a multimeter to identify the ratings of the resistors so placement on the PCB is correct.Please pay attention to the patterns on PCB, the resistances with different color rings, the polarities of capacitances, LEDs, and the mini gap on the chip, you will find the right placements. When finish assemble them, please practice to seal components to each bonding pads with own solder wires.
Installation Steps:
(1) Install metal film resistor, DIP-8P IC socket, Self-Locking switch, Potentiometer, S8550, Electrolytic capacitor, 5mm Red LED on PCB according to mark on PCB. Notice please: Pay attention to the direction of IC Socket. In addition to facilitate debugging, don't install IC LM393 temporarily.
(2) PCB placed in front. The support bolts of the caster are inserted into the hole, tighten the nuts screwed into the caster, and finally fit the caster and tighten.
(3) Install photoresistor and white LED on PCB reverse. But please make sure the distance is about 5mm between top of mecanum wheel (top of screw cap top) and photoresistor/ LED.
(4) Install 2pcs DC motors.
(5) Install battery case and wheel
(6) Test:
(6.1) Install your 2pcs AA battery.
(6.2) Press on switch. If 2pcs white LED ON, the installation is successful. If LED off, please check the welding. Pay attention to the direction of LED and other component and check pseudo Soldering.
(6.3) Power on. Check S8550 or 10ohm resistor if motor don't move.
(6.4) Install LM393 (Pay attention to the direction of IC).
9. SZDoit Smart RC Metal Robot Tank Car Chassis Compatible Arduino Raspbery pi NodeMCU Track Crawler Caterpillar Platform DC 12V Motor Metal Wheel (Black)
Feature
Get free: Acrylic plate, couplings, 18650 battery box.Can add our development kit in our store, we offer the manual.
Easy to assembled by yourself and easy to learn Arduino Raspberry Pi DIY.
Aluminum alloy car platform - offer outstanding appearance, higher durability and stability.
We will attach a simple manual in the package, pls scan the QR code to read the full manual.
Description
Product Parameters: Product Type: T101 Product Size: 19 * 16.5 * 5.7cm (L * W * H) Product weight: 0.53kg Panel material: 2mm aluminum Surface treatment: sandblasting oxidation Track: Engineering Plastics Motor: 6-12V150rpm Wheels: Aluminum Shipping list: Panel: 1pcs Motor: 2pcs Track: 2pcs Non-shock absorption bearing wheel: 2pcs Non-shock absorption drive wheel: 2pcs Screw Accessories: 1 set Free: Acrylic plate: 1pcs couplings: 1 set Hexagon wrench: 1 set Note: For the convenience of transport, the tank chassis is unassembled. We will attach a simple manual in the package, pls scan the QR code to read the full manual.10. Hobby Motor - Gear
Feature
voltage range of 1.0 to 3.0V DCno load speed of 660010% RPM (@1.0V DC, 110mA
Description
Description: This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works well for basic things like making a fan or spinning something pretty fast without much resistance.
The motor has an operating voltage range of 1.0 to 3.0V DC and a no load speed of 660010% RPM (@1.0V DC, 110mA).
Recent Comments