Top 10 best tinting headlights
Finding the best tinting headlights suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
1. 12 by 48 Inches Self Adhesive Headlight, Tail Lights, Fog Lights Tint Vinyl Film (12 X 48, Light Black)
Feature
1 piece 12 by 48 inchesColor: light black
Self-adhesive, peel and stick
Stretchable with heat and water resistant
Easily cleansed with water and easy to remove without residual
Description
1 piece 12 by 48 inches, Color: light black. Smooth surfaceStretchablSelf-adhesive Easy removal with no residual Suitable for any headlights, fog lights, side marker lights or seven top part of the windshield.2. DIBRAND Headlights, Tail Lights, Fog Lights Tint Vinyl Film, Self Adhesive (Small 12''X48'', GLOSS Black)
Feature
Stretchable with heat and water resistantSelf-adhesive, peel and stick
Easily cleansed with water and easy to remove without residual
Color: BLACK
Size: 12''X48''
Description
Why is headlight protection so valuable ?It has been estimated that on average 1 out of every 6 automobiles will require headlight replacement due to damage from road debris. Replacing headlight components can be an expensive and time consuming process, the average headlamp set costs $450 to replace. Plastic headlights tend to dull and lose their transparency, glass headlights tend to break and fracture as they wear. what tools do I need for install headlight tint?Vinyl Squeegee (Credit Card /w cloth wrap will work)Soft Cloth TowelSpray Bottle with soapy waterHair Dryer or a Heat GunHow to Install Headlight and Tail Light Tint film?1. Clean the surface of the Headlight or Tail light with soap and water to ensure all debris are removed from the surface of the Tail Light. 2. Carefully remove the Overlay from the sheet and spray the overlay's adhesive side with Soap and Water. The Soap and Water will prevent the Overlay's adhesive from sticking while you apply it the Tail Light. 3. Carefully apply/align the Overlay on the Tail Light and smooth out as much crease as possible by using your fingers. Use the vinyl squeegee to push out all the soapy water on the front face of the Tail Light. The more soapy water you push out the less bubbling there will be. Note: Make sure the crease are evenly distributed on the Overlay, therefore you can easily smooth it out with a heat Gun and Squeegee.4. Carefully pull and fold the side inward. If necessary, use the hair dryer to soften up the vinyl and squeegee out all the crease.5. Heat up the excess vinyl (heating up the vinyl will soften it and makes it easy to trim) and trim. Note: Don't worry if you over stretch the vinyl. Any excess vinyl protruding can be easily removed using a brand new exacto knife.3. sticky-graphics Gloss Chameleon Vinyl Headlight Wet Tinting Adhesive Extra Large 12"x 96" Wrap Roll (Black Rainbow)
Feature
Chameleon headlight tints are designed to conform and stretch around difficult surfaces.Large enough to fit virtually any size of headlight and can be custom cut to the necessary shape.
These films have an acrylic-based adhesive on the backing to make installation a breeze.
High quality vinyl is scratch, grime, water and dirt resistant.
Comes in an extra-large, 12" x 96" roll!
Description
Add style and protection to your lights with Chameleon Headlight Tinting Vinyl. This easy to use vinyl roll is durable, lightweight and a great alternative to fixing or replacing potentially damaged lights. Each vinyl sheet features our air-release adhesive backing making installation easy at any skill level. Ideal for any headlight or tail light on any vehicle.4. Aumo-mate 12 by 48 Inches Transparent Shiny Chameleon Car Headlight Film , Car Styling Fog LightsTint Vinyl Film , Self Adhesive Tail Lights Sticker Car Accessories
Feature
12 by 48 Inches film sticker for car headlights, fog lights, taillight, etc.Superior transparency, light transmittance up to 90 percent.
Self-adhesive, smooth surface and stretchable; Fit any car or truck, make your car beautiful and special
The color will change,at different angles will see different colors.
Note: 1.This film has 3 layers, when you stick it, you should take off the first protective layer. 2. if you get the film with the creases, do not worry, it is the problem in the shipping way. please heat the film with the hairdryer when you stick it, then the creases will be disappear. 3.If you do not stick it as well as the picture , we suggest you to go to the car shop and ask the professional workers for help. They can will help you stick the film and make it beautiful
Description
This 12 by 48 Inches film sticker is suitable for car headlights, fog lights, taillight, etc. Make your car more unique and cool.
Note:
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
Specifications:
Material: Vinyl
Size: Approx. 12 by 48 Inches /
Weight: Approx. 96g / 3.4oz
Color:Transparent,Green,Blue(optional)
Package Includes:
1 * Film Sticker
Please Note:
1.This film has 3 layers, when you stick it, you should take off the first protective layer.
2. if you get the film with the creases, do not worry, it is the problem in the shipping way. please heat the film with the hairdryer when you stick it, then the creases will be disappear.
3.If you do not stick it as well as the picture , we suggest you to go to the car shop and ask the professional workers for help. They can will help you stick the film and make it beautiful
5. VViViD Dark Black Adhesive Headlight Wrap Wet Tinting Vinyl 17.9" x 48" Roll (2 Roll Pack)
Feature
Customize the appearance of your headlights with ease!Adhesive-backed headlight tint is best suited for flat surfaces and provides an incredible high-gloss finish unlike anything you've seen before.
This film is self-healing with heat, minimizing and in some cases undoing scratches!
Adhesive backing is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your light.
Film is wet apply: spray down your headlight with a simple water and soap mixture (no harmful chemicals needed!), squeegee out the excess and once dry, apply heat to make the adhesive permanent.
Description
Add a bold and unique appearance to your headlights with the VViViD Adhesive Headlight Tint! This adhesive backed vinyl is designed to wrap your vehicle's headlights or taillights, giving you a unique look that won't effect the vehicle underneath, This film is incredibly easy to install by hand and will impart an incredibly smooth, glass-like finish once complete. Installation guide: 1) Measure the dimensions of your headlight and cut the vinyl to the required size, adding two inches of material to every side. 2) Clean your headlight with any mild automotive cleaner, ensuring to remove all dust and debris. Allow the headlight to dry completely. 3) In a spray bottle, make a mixture of water and a few drops of baby shampoo or mild dish soap. Thoroughly wet the headlight with this mixture. 4) Drape the vinyl over the headlight and, using a squeegee and working out from the centre, carefully squeegee out all of the liquid under the film, paying careful attention to push out any and all water bubbles. 5) Using an exacto or precision cutting blade, remove any excess vinyl from around the headlight. 6) Heat the film with a heat gun or hair dryer, and allow to cure for 24 hours.6. VViViD Dark Black Adhesive Headlight Wrap Wet Tinting Vinyl 16" x 48" Roll (2 Roll Pack)
Feature
Customize the appearance of your headlights with ease!Adhesive-backed headlight tint is best suited for flat surfaces and provides an incredible high-gloss finish unlike anything you've seen before.
This film is self-healing with heat, minimizing and in some cases undoing scratches!
Adhesive backing is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your light.
Film is wet apply: spray down your headlight with a simple water and soap mixture (no harmful chemicals needed!), squeegee out the excess and once dry, apply heat to make the adhesive permanent.
Description
Add a bold and unique appearance to your headlights with the VViViD Adhesive Headlight Tint! This adhesive backed vinyl is designed to wrap your vehicle's headlights or taillights, giving you a unique look that won't effect the vehicle underneath, This film is incredibly easy to install by hand and will impart an incredibly smooth, glass-like finish once complete. Installation guide: 1) Measure the dimensions of your headlight and cut the vinyl to the required size, adding two inches of material to every side. 2) Clean your headlight with any mild automotive cleaner, ensuring to remove all dust and debris. Allow the headlight to dry completely. 3) In a spray bottle, make a mixture of water and a few drops of baby shampoo or mild dish soap. Thoroughly wet the headlight with this mixture. 4) Drape the vinyl over the headlight and, using a squeegee and working out from the centre, carefully squeegee out all of the liquid under the film, paying careful attention to push out any and all water bubbles. 5) Using an exacto or precision cutting blade, remove any excess vinyl from around the headlight. 6) Heat the film with a heat gun or hair dryer, and allow to cure for 24 hours.7. XKGLOW XK042001-M-H4 High/Low Beam with Tinting Sleeves Bright LED Headlight Conversion Kit (Replacement Bulb,2,850lm 30 Watt Motorcycle)
Feature
Up to 30 watts 2,850 LumensBlue, yellow, Pink, and Purple tinting sleeves included. 10 value
Excellent heat dissipation with 6063 aluminum and active cooling fan
Weatherproof Construction and shockproof driver
Easy plug and play installation
Description
Want your Headlight to shine brighter and further but your current bulb just isn't cutting it? want to get rid of that old yellow light tint and give your ride an updated look with a cool white light beam? look no further built with high power premium quality COB LEDs, these LED Headlight bulbs will cast a precise light beam that will give you increased visibility, a wider viewing angle, and a much longer lifetime over conventional halogen bulbs. Tinting sleeves are included at no extra cost giving you the option to give your lights a Blue, yellow, Purple, or pink tint. The bulbs feature great heat management with 6063 aluminum construction (109% more heat dissipation over Adc12 aluminum) and an active cooling fan spinning at up to 9000Rpms. While competitor's bulbs may dim after heating up to protect their LEDs, our adaptive cooling technology allows our bulbs to shine at full brightness 100% of the time. With an ip-67 waterproof rating and an operating temp range of -40Ac to +80Ac, this LED Headlight conversion kit is ready for action. Tech specs-low beam: 18W high beam: 30W single beam: 24W plug types: h4(h/L) input voltage: 9-16v DC color temperature: 6000K aluminum: 6063 waterproof: IP 67 what's included- 1Pc LED bulb 1Pc compact driver 4 tinting sleeves mounting hardware (3M tape, zip ties, screws) application- motorcycles with h4(h/L) Headlight bulbs. Double check measurements behind Headlight before ordering.8. VViViD Smoke Black Adhesive Headlight Wrap Wet Tinting Vinyl 17.9" x 48" Roll (2 Roll Pack)
Feature
Customize the appearance of your headlights with ease!Adhesive-backed headlight tint is best suited for flat surfaces and provides an incredible high-gloss finish unlike anything you've seen before.
This film is self-healing with heat, minimizing and in some cases undoing scratches!
Adhesive backing is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your light.
Film is wet apply: spray down your headlight with a simple water and soap mixture (no harmful chemicals needed!), squeegee out the excess and once dry, apply heat to make the adhesive permanent.
Description
Add a bold and unique appearance to your headlights with the VViViD Adhesive Headlight Tint! This adhesive backed vinyl is designed to wrap your vehicle's headlights or taillights, giving you a unique look that won't effect the vehicle underneath, This film is incredibly easy to install by hand and will impart an incredibly smooth, glass-like finish once complete. Installation guide: 1) Measure the dimensions of your headlight and cut the vinyl to the required size, adding two inches of material to every side. 2) Clean your headlight with any mild automotive cleaner, ensuring to remove all dust and debris. Allow the headlight to dry completely. 3) In a spray bottle, make a mixture of water and a few drops of baby shampoo or mild dish soap. Thoroughly wet the headlight with this mixture. 4) Drape the vinyl over the headlight and, using a squeegee and working out from the centre, carefully squeegee out all of the liquid under the film, paying careful attention to push out any and all water bubbles. 5) Using an exacto or precision cutting blade, remove any excess vinyl from around the headlight. 6) Heat the film with a heat gun or hair dryer, and allow to cure for 24 hours.9. VViViD Air-Tint Dark Black Headlight/Tail Light Window Tint (120" x 60" Bulk roll)
Feature
VVIVID Air-Tints are an industry first: a headlight/taillight tint with all of the technologies developed in VVIVID+ premium materials. They include an air-release membrane which allows you to install the tint dry ( without installation liquid ) Ready to use out of the box!This is the only film on the market that can wrap ANY SHAPE. It is super conformable with heat. It was originally manufactured for hard-to-wrap surfaces, but the ease of install has professionals saving time on any headlight shape.
This film is also self healing and scratches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl conform to curves, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!
Made with scratch-resistant automotive grade cast vinyl, VVIVID Air-Tints were developed in Canada to reduce the risk of shrinkage and peeling almost completely! The adhesive is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights.
NOTE: MAKE SURE TO MEASURE YOUR HEADLIGHT TINTS - THIS PRE-CUT SHEET IS 120" x 60"
Description
All headlight tints come with a subtle natural air release pattern and can be installed using either dry or wet application methods. These tint films are the first of their kind and are designed to conform to any difficult surface that would otherwise be impossible with standard headlight tints. This film is also self healing and scratches will go away with heat! USE: Simply cut vinyl to shape, apply it to surface. To make vinyl conform to shape, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!10. MagiDeal 50cm x 106cm Headlight Tinting Perforated Mesh Film Like Fly-Eye Tint
Feature
It is designed for use on both curved and flat surfaces, it has plenty of flexibility and can be easily manipulated to follow tight curves during application.Unlike some other tinting mesh on the market ours will stretch easily with heat enabling you to get around the tightest of corners / curves.
Used to determine oil change intervals, service requirements or where there is a need to record hours operated.
Description
Description:
It is designed for use on both curved and flat surfaces, it has plenty of flexibility and can be easily manipulated to follow tight curves during application.
Unlike some other tinting mesh on the market ours will stretch easily with heat enabling you to get around the tightest of corners / curves.
Used to determine oil change intervals, service requirements or where there is a need to record hours operated.
Specification:
Premium quality black mesh headlight / rear light tinting film.
0.2mm Thick.Water Resistant.
UV Stable.
Suitable for interior or exterior use.
Easy removal with no glue left behind.
Can be re-applied many times without losing adhesion.
Easy to manipulate around tight curves with heat (hairdrier or similar).
Package Includes:
1x Headlight Mesh Film
Recent Comments