Top 10 best tailgate wrap 2018
Finding the best tailgate wrap suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
1. Truck Tailgate Wrap Decal Deer Skull Flag Grass Camo 3m Cast 10 Yr Vinyl Laminated
Feature
3m's Best Cast Vinyl Air Release Technology Conforms to Complex CurvesHD Resolution Easiest Vinyl To Install Squeegee Included
8- 10 Year Outdoor Durability, Laminated Air Release Vinyl
Won't Peel, Shrink, Crack or Fade, Made in USA, 25x66 Inches
3m Cast Vinyl Slideable, Repositionable, Removes Clean Will Not Harm Paint
Description
We use Top Of The Line Premium Air Release 3m Cast Vehicle Vinyl and Matte Laminate which has a deep no glare finish. This combination is highly conformable to curves. We print in High Resolution with leading technology UV resistant inks for the longest lasting graphics offered.Washable and resistant to outdoor weather conditions. They are waterproof, tear proof, and will last for many years.These are quality wraps printed on the Top Of The Line 3m Cast Air Release Outdoor Quality Vinyl. They are produced on 2mil HIGH PERFORMANCE AIR EGRESS Cast VINYL that conforms to complex curves . This material is design to allow the air bubbles to be forced out as you apply. Easy bubble free installation for everyone. These decals are Laminated and will last for 8-10 YEARS. We printed them on our Commercial WIDE FORMAT DIGITAL printer using ECO SOLVENT INK.
Cast Vinyl is a Premium Vinyl that has no memory so it conforms and does not shrink to surfaces installed on. Automotive Wraps and Branding Decals are made of Cast Vinyl. Calendar Vinyl retains memory and sometimes will try and move back to original state and may cause shrinkage. Calendar Vinyl is a good general purpose vinyl used for window decals, cornhole board decals and purpose decals. If it doesn't say Cast most likely is Calendar Vinyl.
2. Avery T96 MODEL TAILGATE WRAP Vinyl Graphic Decal Sticker F150 F250 F350 Ram Silverado Sierra Tundra Ranger Frontier Titan Tacoma 1500 2500 3500 Bed Cover tint image
Feature
Universal Size (See Sizing Below)Air Release Technology
Laminated For Protection - 7+ Year Outdoor Vinyl
Easy To Install - Requires No Maintance.
Weather Proof & Car Wash Safe
Description
SIZING:The measurements of this item are 65.75inx25in Which will fit MOST pick up truck tailgates. Even if it is listed as fitting your truck Please measure your tailgate BEFORE ordering to make sure the size provided will work. WE CAN NOT ACCEPT RETURNS OR EXCHANGES DUE TO SIZING ISSUES. This is a UNIVERSAL decal. If it needs to be made a different size please contact us through AMAZON MESSAGING before buying and we can size it to your needs for no extra charge.
INSTALLATION INSTRUCTIONS:
(1)Clean surface of any dust or debris. Alcohol is recommended. (make sure surface is dry) (2)Place decal on a flat surface face down and peel off paper backing, *IMPORTANT* Avoid letting the decal stick to its self (3)Pull slightly tight, and Lightly stick the 4 corners of the decal to the desired location (this may be easier with two people) (4)With a padded credit card or drivers license, squeegy the decal down working from the middle out. (Try to avoid bubbles and/or creases) (5)Trim the excess material off along the edge of the tailgate with a razor or hobby knife (6)Heating the decal after application with a heat gun will aid in application.
ADDITIONAL TIPS:
This decal MUST be applied dry for the air release technology to work correctly (No wet application).Badges/Emblems must be removed and properly cleaned before application, please research how to remove these items or seek the help of a body shop. Application will be much easier with the handle removed as well, but a professional should have no problem with it left on using a heat gun (This is optional). Bubbles larger than a quarter may need to be popped with a pin or razor to aid the air release. Do not force them down. Please do not hold the seller accountable for installation errors. Professional installation is always an option at your local sign shop. Feel free to watch some videos of vinyl wrap installations for additional guidance
3. T40 AMERICAN FLAG EAGLE USA TAILGATE WRAP Vinyl Graphic Decal Sticker F150 F250 F350 Ram Silverado Sierra Tundra Ranger Frontier Titan Tacoma 1500 2500 3500 Bed Cover tint image
Feature
Universal Size (See Sizing Below)Air Release Technology
Laminated For Protection - 7+ Year Outdoor Vinyl
Easy To Install - Requires No Maintance.
Weather Proof & Car Wash Safe
Description
SIZING:The measurements of this item are 65.75inx25in Which will fit MOST pick up truck tailgates. Even if it is listed as fitting your truck Please measure your tailgate BEFORE ordering to make sure the size provided will work. WE CAN NOT ACCEPT RETURNS OR EXCHANGES DUE TO SIZING ISSUES. This is a UNIVERSAL decal. If it needs to be made a different size please contact us through AMAZON MESSAGING before buying and we can size it to your needs for no extra charge.
INSTALLATION INSTRUCTIONS:
(1)Clean surface of any dust or debris. Alcohol is recommended. (make sure surface is dry) (2)Place decal on a flat surface face down and peel off paper backing, *IMPORTANT* Avoid letting the decal stick to its self (3)Pull slightly tight, and Lightly stick the 4 corners of the decal to the desired location (this may be easier with two people) (4)With a padded credit card or drivers license, squeegy the decal down working from the middle out. (Try to avoid bubbles and/or creases) (5)Trim the excess material off along the edge of the tailgate with a razor or hobby knife (6)Heating the decal after application with a heat gun will aid in application.
ADDITIONAL TIPS:
This decal MUST be applied dry for the air release technology to work correctly (No wet application).Badges/Emblems must be removed and properly cleaned before application, please research how to remove these items or seek the help of a body shop. Application will be much easier with the handle removed as well, but a professional should have no problem with it left on using a heat gun (This is optional). Bubbles larger than a quarter may need to be popped with a pin or razor to aid the air release. Do not force them down. Please do not hold the seller accountable for installation errors. Professional installation is always an option at your local sign shop. Feel free to watch some videos of vinyl wrap installations for additional guidance
4. SF T313 Deer Buck TAILGATE WRAP Vinyl Graphic Decal Sticker F150 F250 F350 Ram Silverado Sierra Tundra Ranger Frontier Titan Tacoma 1500 2500 3500 Bed Cover tint image
Feature
Universal Size (See Sizing Below)Air Release Technology
Laminated For Protection - 7+ Year Outdoor Vinyl
Easy To Install - Requires No Maintance.
Weather Proof & Car Wash Safe
Description
SIZING:The measurements of this item are 65.75inx25in Which will fit MOST pick up truck tailgates. Even if it is listed as fitting your truck Please measure your tailgate BEFORE ordering to make sure the size provided will work. WE CAN NOT ACCEPT RETURNS OR EXCHANGES DUE TO SIZING ISSUES. This is a UNIVERSAL decal. If it needs to be made a different size please contact us through AMAZON MESSAGING before buying and we can size it to your needs for no extra charge.
INSTALLATION INSTRUCTIONS:
(1)Clean surface of any dust or debris. Alcohol is recommended. (make sure surface is dry) (2)Place decal on a flat surface face down and peel off paper backing, *IMPORTANT* Avoid letting the decal stick to its self (3)Pull slightly tight, and Lightly stick the 4 corners of the decal to the desired location (this may be easier with two people) (4)With a padded credit card or drivers license, squeegy the decal down working from the middle out. (Try to avoid bubbles and/or creases) (5)Trim the excess material off along the edge of the tailgate with a razor or hobby knife (6)Heating the decal after application with a heat gun will aid in application.
ADDITIONAL TIPS:
This decal MUST be applied dry for the air release technology to work correctly (No wet application).Badges/Emblems must be removed and properly cleaned before application, please research how to remove these items or seek the help of a body shop. Application will be much easier with the handle removed as well, but a professional should have no problem with it left on using a heat gun (This is optional). Bubbles larger than a quarter may need to be popped with a pin or razor to aid the air release. Do not force them down. Please do not hold the seller accountable for installation errors. Professional installation is always an option at your local sign shop. Feel free to watch some videos of vinyl wrap installations for additional guidance
5. T30 AMERICAN FLAG EAGLE USA TAILGATE WRAP Vinyl Graphic Decal Sticker F150 F250 F350 Ram Silverado Sierra Tundra Ranger Frontier Titan Tacoma 1500 2500 3500 Bed Cover tint image
Feature
Universal Size (See Sizing Below)Air Release Technology
Laminated For Protection - 7+ Year Outdoor Vinyl
Easy To Install - Requires No Maintance.
Weather Proof & Car Wash Safe
Description
SIZING:The measurements of this item are 65.75inx25in Which will fit MOST pick up truck tailgates. Even if it is listed as fitting your truck Please measure your tailgate BEFORE ordering to make sure the size provided will work. WE CAN NOT ACCEPT RETURNS OR EXCHANGES DUE TO SIZING ISSUES. This is a UNIVERSAL decal. If it needs to be made a different size please contact us through AMAZON MESSAGING before buying and we can size it to your needs for no extra charge.
INSTALLATION INSTRUCTIONS:
(1)Clean surface of any dust or debris. Alcohol is recommended. (make sure surface is dry) (2)Place decal on a flat surface face down and peel off paper backing, *IMPORTANT* Avoid letting the decal stick to its self (3)Pull slightly tight, and Lightly stick the 4 corners of the decal to the desired location (this may be easier with two people) (4)With a padded credit card or drivers license, squeegy the decal down working from the middle out. (Try to avoid bubbles and/or creases) (5)Trim the excess material off along the edge of the tailgate with a razor or hobby knife (6)Heating the decal after application with a heat gun will aid in application.
ADDITIONAL TIPS:
This decal MUST be applied dry for the air release technology to work correctly (No wet application).Badges/Emblems must be removed and properly cleaned before application, please research how to remove these items or seek the help of a body shop. Application will be much easier with the handle removed as well, but a professional should have no problem with it left on using a heat gun (This is optional). Bubbles larger than a quarter may need to be popped with a pin or razor to aid the air release. Do not force them down. Please do not hold the seller accountable for installation errors. Professional installation is always an option at your local sign shop. Feel free to watch some videos of vinyl wrap installations for additional guidance
6. Amer Flag Eagle- We The People Tailgate Wrap Vinyl Graphic Decal Sticker Wrap
Feature
Brand New GraphicMade to fit most pickup trucks
Proudly made in the U.S.A.
Removes easily up to 3 years
Comes with instructions and a squeegee
Description
SIZING: The measurements of this graphic is 66 inches by 25 inches. This will fit MOST pick up truck tail gates. Even if it is listed as fitting your truck PLEASE MEASURE YOUR TAILGATE BEFORE ORDERING to make sure the size provided will work. WE CAN NOT ACCEPT RETURNS OR EXCHANGES DUE TO SIZING ISSUES. This is a UNIVERSAL decal. If it needs to be made a different size please contact us BEFORE buying and we can usually size it to your needs for no extra charge. INSTALLATION INSTRUCTIONS: (1) Clean surface of any dust or debris. Alcohol is recommended. (Make sure surface is DRY) (2) Place decal on a flat surface face down and peel off paper backing, *IMPORTANT* Avoid letting the decal to stick to itself (3) Pull slightly tight, and LIGHTLY stick the 4 corners of the decal to the desired location ( this may be easier with two people) (4) Squeegee the decal dwon (using the supplied squeegee) working from the middle out. (Try to avoid bubbles and/or creases). (5) Trim the exess material off along the edges of the tailgate with a razor or hobby knife. (6) Heating the decal after application with a heat gun will aid in application. TIPS: This decal MUST BE APPLIED DRY for the air release technology to work correctly (No wet application). Badges/Emblems must be removed and porperly cleaned before application, please research how to remove these items or seek the help of a body shop. Application will be much easier with the handle removed as well, but a professional should have no problem with it left on using a heat gun (This is optional). Bubbles larger than a quarter may need to be popped with a pin or razor to aid the air lease. Do not force them down. Please do not hold the seller accountable for installation errors. Professional installation is always an option at your local sign shop. Feel free to watch some videos on YouTube of vinyl wrap installations for additional guidance.7. T191 DISTRESSED AMERICAN FLAG TAILGATE WRAP Vinyl Graphic Decal Sticker F150 F250 F350 Ram Silverado Sierra Tundra Ranger Frontier Titan Tacoma 1500 2500 3500 Bed Cover tint image
Feature
Universal Size (See Sizing Below)Air Release Technology
Laminated For Protection - 7+ Year Outdoor Vinyl
Easy To Install - Requires No Maintance.
Weather Proof & Car Wash Safe
Description
SIZING:The measurements of this item are 65.75inx25in Which will fit MOST pick up truck tailgates. Even if it is listed as fitting your truck Please measure your tailgate BEFORE ordering to make sure the size provided will work. WE CAN NOT ACCEPT RETURNS OR EXCHANGES DUE TO SIZING ISSUES. This is a UNIVERSAL decal. If it needs to be made a different size please contact us through AMAZON MESSAGING before buying and we can size it to your needs for no extra charge.
INSTALLATION INSTRUCTIONS:
(1)Clean surface of any dust or debris. Alcohol is recommended. (make sure surface is dry) (2)Place decal on a flat surface face down and peel off paper backing, *IMPORTANT* Avoid letting the decal stick to its self (3)Pull slightly tight, and Lightly stick the 4 corners of the decal to the desired location (this may be easier with two people) (4)With a padded credit card or drivers license, squeegy the decal down working from the middle out. (Try to avoid bubbles and/or creases) (5)Trim the excess material off along the edge of the tailgate with a razor or hobby knife (6)Heating the decal after application with a heat gun will aid in application.
ADDITIONAL TIPS:
This decal MUST be applied dry for the air release technology to work correctly (No wet application).Badges/Emblems must be removed and properly cleaned before application, please research how to remove these items or seek the help of a body shop. Application will be much easier with the handle removed as well, but a professional should have no problem with it left on using a heat gun (This is optional). Bubbles larger than a quarter may need to be popped with a pin or razor to aid the air release. Do not force them down. Please do not hold the seller accountable for installation errors. Professional installation is always an option at your local sign shop. Feel free to watch some videos of vinyl wrap installations for additional guidance
8. T23 SKELETON SKULL GRAVEYARD TAILGATE WRAP Vinyl Graphic Decal Sticker F150 F250 F350 Ram Silverado Sierra Tundra Ranger Frontier Titan Tacoma 1500 2500 3500 Bed Cover tint image
Feature
Universal Size (See Sizing Below)Air Release Technology
Laminated For Protection - 7+ Year Outdoor Vinyl
Easy To Install - Requires No Maintance.
Weather Proof & Car Wash Safe
Description
SIZING:The measurements of this item are 65.75inx25in Which will fit MOST pick up truck tailgates. Even if it is listed as fitting your truck Please measure your tailgate BEFORE ordering to make sure the size provided will work. WE CAN NOT ACCEPT RETURNS OR EXCHANGES DUE TO SIZING ISSUES. This is a UNIVERSAL decal. If it needs to be made a different size please contact us through AMAZON MESSAGING before buying and we can size it to your needs for no extra charge.
INSTALLATION INSTRUCTIONS:
(1)Clean surface of any dust or debris. Alcohol is recommended. (make sure surface is dry) (2)Place decal on a flat surface face down and peel off paper backing, *IMPORTANT* Avoid letting the decal stick to its self (3)Pull slightly tight, and Lightly stick the 4 corners of the decal to the desired location (this may be easier with two people) (4)With a padded credit card or drivers license, squeegy the decal down working from the middle out. (Try to avoid bubbles and/or creases) (5)Trim the excess material off along the edge of the tailgate with a razor or hobby knife (6)Heating the decal after application with a heat gun will aid in application.
ADDITIONAL TIPS:
This decal MUST be applied dry for the air release technology to work correctly (No wet application).Badges/Emblems must be removed and properly cleaned before application, please research how to remove these items or seek the help of a body shop. Application will be much easier with the handle removed as well, but a professional should have no problem with it left on using a heat gun (This is optional). Bubbles larger than a quarter may need to be popped with a pin or razor to aid the air release. Do not force them down. Please do not hold the seller accountable for installation errors. Professional installation is always an option at your local sign shop. Feel free to watch some videos of vinyl wrap installations for additional guidance
9. T315 Zombie Zombies TAILGATE WRAP Vinyl Graphic Decal Sticker F150 F250 F350 Ram Silverado Sierra Tundra Ranger Frontier Titan Tacoma 1500 2500 3500 Bed Cover tint image
Feature
Universal Size (See Sizing Below)Air Release Technology
Laminated For Protection - 7+ Year Outdoor Vinyl
Easy To Install - Requires No Maintance.
Weather Proof & Car Wash Safe
Description
SIZING:The measurements of this item are 65.75inx25in Which will fit MOST pick up truck tailgates. Even if it is listed as fitting your truck Please measure your tailgate BEFORE ordering to make sure the size provided will work. WE CAN NOT ACCEPT RETURNS OR EXCHANGES DUE TO SIZING ISSUES. This is a UNIVERSAL decal. If it needs to be made a different size please contact us through AMAZON MESSAGING before buying and we can size it to your needs for no extra charge.
INSTALLATION INSTRUCTIONS:
(1)Clean surface of any dust or debris. Alcohol is recommended. (make sure surface is dry) (2)Place decal on a flat surface face down and peel off paper backing, *IMPORTANT* Avoid letting the decal stick to its self (3)Pull slightly tight, and Lightly stick the 4 corners of the decal to the desired location (this may be easier with two people) (4)With a padded credit card or drivers license, squeegy the decal down working from the middle out. (Try to avoid bubbles and/or creases) (5)Trim the excess material off along the edge of the tailgate with a razor or hobby knife (6)Heating the decal after application with a heat gun will aid in application.
ADDITIONAL TIPS:
This decal MUST be applied dry for the air release technology to work correctly (No wet application).Badges/Emblems must be removed and properly cleaned before application, please research how to remove these items or seek the help of a body shop. Application will be much easier with the handle removed as well, but a professional should have no problem with it left on using a heat gun (This is optional). Bubbles larger than a quarter may need to be popped with a pin or razor to aid the air release. Do not force them down. Please do not hold the seller accountable for installation errors. Professional installation is always an option at your local sign shop. Feel free to watch some videos of vinyl wrap installations for additional guidance
10. T321 MiniGun TAILGATE WRAP Vinyl Graphic Decal Sticker F150 F250 F350 Ram Silverado Sierra Tundra Ranger Frontier Titan Tacoma 1500 2500 3500 Bed Cover tint image
Feature
Universal Size (See Sizing Below)Air Release Technology
Laminated For Protection - 7+ Year Outdoor Vinyl
Easy To Install - Requires No Maintance.
Weather Proof & Car Wash Safe
Description
SIZING:The measurements of this item are 65.75inx25in Which will fit MOST pick up truck tailgates. Even if it is listed as fitting your truck Please measure your tailgate BEFORE ordering to make sure the size provided will work. WE CAN NOT ACCEPT RETURNS OR EXCHANGES DUE TO SIZING ISSUES. This is a UNIVERSAL decal. If it needs to be made a different size please contact us through AMAZON MESSAGING before buying and we can size it to your needs for no extra charge.
INSTALLATION INSTRUCTIONS:
(1)Clean surface of any dust or debris. Alcohol is recommended. (make sure surface is dry) (2)Place decal on a flat surface face down and peel off paper backing, *IMPORTANT* Avoid letting the decal stick to its self (3)Pull slightly tight, and Lightly stick the 4 corners of the decal to the desired location (this may be easier with two people) (4)With a padded credit card or drivers license, squeegy the decal down working from the middle out. (Try to avoid bubbles and/or creases) (5)Trim the excess material off along the edge of the tailgate with a razor or hobby knife (6)Heating the decal after application with a heat gun will aid in application.
ADDITIONAL TIPS:
This decal MUST be applied dry for the air release technology to work correctly (No wet application).Badges/Emblems must be removed and properly cleaned before application, please research how to remove these items or seek the help of a body shop. Application will be much easier with the handle removed as well, but a professional should have no problem with it left on using a heat gun (This is optional). Bubbles larger than a quarter may need to be popped with a pin or razor to aid the air release. Do not force them down. Please do not hold the seller accountable for installation errors. Professional installation is always an option at your local sign shop. Feel free to watch some videos of vinyl wrap installations for additional guidance
Recent Comments