Top 10 best helmet accessories for 2018
Finding the best helmet accessories suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
1. customTAYLOR33 Warhawk/Mohawk Rubber Saw Blade Helmet Accessory Piece (Helmet Not Included)
Feature
Easy to apply. Adheres with strong 3M tapeMade out of rubber. Extremely durable.
Warhawk can be cut shorter for smaller helmets
15 blades (approximately 15.75 inches total length)
Made in the USA
Description
Black rubber sawblade warhawk/mohawk for any type of helmets. Warhawk can easily be cut to shorter lengths as needed to fit your helmet. Warhawk comes with detailed instructions for easy application. Very strong adhesive - tested at 200 mph.2. OSdream Helmet Counterbalance Weight Bag for OPS FAST BJ PJ MH Tactical Helmets/Helmet Accessories (Tan)
Feature
This item includes only one color, not threeTotal system weight 300gEach of which counterbalance weight about 50g
Simple to install, unscrew the helmet two large screws, stacking screw
Weight bags can also be equipped with batteries
Description
Used to balance good helmets and equipped with night-vision goggles. They help ease the use of the helmet for a long time to clear it out glasses has decreased drastically due to the overhanging weight. System of checks and balances is very low key, with the most safety helmet designed to counter market because it attached via Velcro, rear bolt helmet.3. Cat Ear Helmet Upgrade: Easy Peel-and-Stick Helmet Accessory with 5 Colored Decals included.
Feature
The Cat Ear Helmet Upgrade is a flexible rubber addition that is attached with 3M tape.100's of Happy Customers! Just peel and stick, place on any smooth surface, and you are good to go. Now you can wear your favorite DOT, SNELL, or Helmet Brand and easily add a Cat Ear Helmet Accessory.
Wind easily passes through to the vents in the rear, minimizing wind resistance. Tested up to 130mph.
The front flat surface has 37 round holes in each ear that allow air to pass thru to the rear vents. Minimizing any wind drag effects - "less drag than a top mount GoPro."
5 Colored Reflective Decals are included with each set of ears and can be applied to the front surface with the air vent holes already pre-punched out.
Description
The Cat Ear Helmet Upgrade is a flexible rubber addition that is attached with 3M tape. Just peel and stick, place on any smooth surface, and you are good to go.Now you can wear your favorite DOT, SNELL, or Helmet Brand and easily add a Cat Ear Helmet Accessory.
The front surface is black rubber with 37 round holes in each ear.
5 Colored Reflective Decals are included with each set of ears and can be applied to the front surface with the air vent holes already pre-punched out.
Wind easily passes through to the vents in the back. Tested up to 130mph.
100's of Happy Customers!
4. customTAYLOR33 High Intensity Grade Reflective Warhawk/Mohawk Decals (Rubber Warhawk & Helmet not included) Many Colors (Red)
Feature
High Intensity Reflective Decals for the Sawblade Warhawk/Mohawk (Warhawk & Helmet not included)Easy to peel and apply.
These decals are precision cut & designed to fit perfectly on each blade of your Warhawk.
Extremely strong adhesive, UV and solvent resistant coating ensure durability.
Description
Give your helmet rubber Warhawk (sold separately) some color during the day and shine at night with our reflective Warhawk decals! These precision cut decals are designed to fit perfectly on each blade of your Warhawk.5. ILM Motorcycle Accessories Helmet Holder Hanger Rack Jacket Hook Gifts
Feature
Helmet rack offer not only space for helmet storage; but also offer you additional space for keeping your garments, creating a little more space in your house, trailer or garage.Well-mounted helmet racks also have the benefit of decorating your trailer/ garage and making it look even more organized.
Again, helmet racks can be mounted high on the walls so as not to use up your space or cause obstruction along your garage. If well positioned, helmet hooks will give you the service you need without necessarily having to create any more space for them.
This Rang fits almost everywhere, mount it on doors, closet rods, walls, anywhere.
Made of steel, color black, and four predrilled holes, come in 8.6" 4.1" 10.8" inches
Description
Motorcycle Helmet / Jacket StorageGetting the best means for storing your helmet is usually a great way to start your riding adventure. Further, helmets give you the confidence you need all through your riding exercise, leave alone protecting you. Make sure to protect it, while it's not protecting you.
6. SUREWO Motorcycle Helmet Chin Mount Compatible with GoPro Hero 7/(2018)/6/5 Black,4 Session,3+,AKASO/Campark/YI Action Camera,Helmet Front and Side Swivel Mount and Adhesive Mounts with Sticky Pads
Feature
SPECIFIC PRODUCT for BIKER:Multi-Function helmet mounts kit,is our own new developed product which satisfy the customers and meet the market demand.In order to ensure your rights,and the product is consistent with described and pictures,pls look for seller"SUREWO",it sell all the products of SUREWO exclusively on Amazon.SPECIALIZED ACCESSORIES in COMBINATION:We do our best to mix accessories,No redundant accessories,every accessory would be used.That may be the most cost-effective product.
MOTORCYCLE HELMET CHIN MOUNT:It's made up of 4 joints and connect by screw.The screw can be adjusted so that you can rotate the joints,every joint can be rotated 180 degree.We give away a s-adapter to match your camera if there is a threaded hole at the bottom.
ADHESIVE MOUNTS & STICKY PADS:Adhesive mounts divided into curved and flat mounts,you can use according to circumstances.Industrial strength waterproof sticky pads,help you install your camera on the helmet.
SAFETY ROPE BUCKLE & WRENCH:You can install safety rope after installing the camera,it provides dual protection.The wrench can adjust all the screws except the screw which at the bottom,you need to use your own screwdriver.
Description
WHY CHOOSE US:WHAT WE DO - We are a technology company that specialize in accessories of action cameras.
OUR APTITUDE - We have over 8 years of experience in it though we are a new registered company,and we are always concentrating on developments,improvements and our customers' needs.
PRODUCTS IMPROVEMENT - Most of our products have improved according to customers' needs and feedbacks.
REASONABLE PRODUCTS MIX - We would deliberate about products mix and products' price when we wanted to display some products.We have to make sure them with reasonable products mix,we refuse them with redundant items.
The helmet chin mount can be install anywhere on the helmet according to your need.And you can adjust to any shooting angles,such as your forward visibility, backward visibility and blind area.
By the way,the adhesive mounts and sticky pads can be use on other place(like ski/skate/surf boards,kayak or other action sports.)The sticky pad can be removed cleanly after heating with the hair dryer.
Specification:
Material:Plastic
Suitable for:GoPro Hero 6 Black,Hero 5 Black,Session 5/4,4 Silver,3+,AKASO/Campark/Crosstour/APEMAN action camera,SJ4000/5000/6000,Xiaomi YI/4K,LD4000/6000,Sony Sports DV,etc.
Product Includes:
1*Motorcycle helmet chin mount
1*J-hook
2*Curved mounts
2*Flat mounts
10*Sticky pads
2*Screws
1*Safety rope buckle
1*Wrench
Gift
1*S-adapter
1*Release buckle
Note:
The camera and helmet are not included.
If you have any problems or feedbacks,pls contact us,we're all ears for any ideas you give.
What we're doing right now,we're chasing perfection.
7. OneTigris Helmet Rail Adapter for Accessory Rail Connectors of Tactical Airsoft FAST ACH MICH IBH Helmet
Feature
Material: Constructed by durable plasticAll sizes of FAST /ACH /MICH /IBH helmet can seamlessly incorporate the Rail Adapter by using these Accessory Rail Connectors
Easy to Set Up: Easy to set up your helmet accessories to your FAST /ACH /MICH /IBH helmet with these rail adapters
Package Includes 4pcs: Picatinny Rail Adapter *2, Flashlight Rail Adapter *1, Single-clamp Rail Adapter *1. Flashlight, Helmet & OneTigris Patch are excluded
Total Weight: 2oz (57g) | Lifetime Warranty
Description
DescriptionsPicatinny Rail Adapter
Use it to mount headborne accessories to the helmet
Accessories slide onto the Picatinny
Quickly attaches or releases from the rail system
Size: 2 *0.8 *0.5inch (5 *2 *1.3cm)
Weight: 0.9oz (25g)
Single-clamp Rail Adapter
Use it to mount Surefire E1L Light to the helmet.
Quickly attaches or releases from the rail system.
Durable, lightweight
Size: 1.75 *1.57 *1.5inch (4.5 *4 *3.8cm)
Bore Size: 0.83 *0.72inch (2.1 *1.8cm)
Weight: 0.7oz (20g)
Flashlight Rail Adapter
Use it to mount SureFire X300 to the helmet.
Quickly attaches or releases from the rail system.
Durable, lightweight
Size: 1.73 *1.57 *0.59in (4.4 *4 *1.5cm)
Weight: 0.4oz (12g)
Specifications
Material: Plastic
Total Weight: 2oz (57g)
Picatinny Rail Adapter Size: 2 *0.8 *0.5inch (5 *2 *1.3cm)
Single-clamp Rail Adapter Size: 1.75 *1.57 *1.5inch (4.5 *4 *3.8cm)
Flashlight Rail Adapter Size: 1.75 *1.57 *0.59in (4.5 *4 *1.5cm)
Package Includes
Picatinny Rail Adapter *2
Flashlight Rail Adapter *1
Single-clamp Rail Adapter *1
8. Moto Loot Helmet Cover for Motorcycle Helmet, Fun Rides and Gifts (Cover Only. Helmet Not Included) - Red
Feature
MAKES EVERYONE HAPPY: everywhere you ride wearing this funny red helmet cover you'll brighten people's day. Children will laugh, heads will turn and people will smile. You'll also likely star in multiple Snapchat/Instagram stories and feature on many Insta and Facebook pages!HELPS BE SEEN: wearing this furry helmet cover will make you really stand out. This greatly increases the chance of drivers seeing you. Perfect for any rider that doesn't like being hit by cars.
ONE SIZE FITS ALL: this monster helmet cover has been specially designed to fit most full-face motorcycle helmets. This means you don't need to worry about it not fitting your helmet! You can also lend it to a friend and it should slip onto their helmet.
EASY TO INSTALL: simply slip it onto your helmet, adjust the cover so the mouth aligns with your visor and your vision is maximised, then pull it down tight. Detailed installation instructions are also printed on the packaging in case you get stuck.
SATISFACTION GUARANTEE: The most important thing for us is that you 100% love your purchase. If you are not 100% satisfied for any reason, please let us know and we will refund your purchase.
Description
WHY YOU NEED THIS HELMET COVER?
BRINGS SMILES TO FACES
Children will laugh, heads will turn and you'll make everyone a little happier when you rider past wearing this funny red helmet cover. Everywhere you ride people will laugh, wave, give you thumbs up and take pictures. Don't be surprised if you find yourself staring on multiple social media pages after going for a ride wearing this furry helmet cover.
BRIGHTENS DULL COMMUTES
Let's be honest, we all have to do some rides that are a little less interesting (slow, high-traffic commutes come to mind). Chuck one of these removable helmet covers on before heading out and we promise it'll make any ride loads of fun!
HELPS YOU BE SEEN
It's no secret drivers often don't see us when we're out on our motorcycles. With one of these bright red helmet covers you'll stand out and have a much higher chance of being seen by others on the road. Fantastic benefit for any rider that doesn't like being hit by cars.
ONE SIZE FITS ALL
That's right, these furry helmet covers come in just one size that fits almost all helmets. This means if you ever change helmets, you can use your helmet cover with your new one. It also means you can lend it to your friend and it should slip nicely onto their helmet.
EASY TO INSTALL
This monster helmet cover is so easy to install even a monkey could do it (okay, we haven't tested this...if anyone knows a motorcycle riding monkey, please let us know). Simply slip it onto your helmet, adjust the cover so the mouth aligns with your visor and your vision is maximised, then pull it down tight.
KEEPS HELMET CLEAN
Hate bugs? Yeah so do we. This crazy helmet cover will scare them away so you'll never have to clean bugs of your bike/gear again! Alright, that's not entirely true. While it won't scare them away, it will stop bugs and dirt from sticking to your beautiful helmet.
9. DP Mask Deluxe Full Head Latex Helmet Cosplay Costume Accessory Xcoser New
Feature
100% brand new cosplay maskIncluding: A full head of mask;
Color: Red; Head size: about 57cm; Fits teens
Material: Latex; Made of high-grade latex material
There are some XCOSER service cards come with the package. Any questions, please feel free to contact us.
Description
Color: Red; Head size: about 57cm; Fits teens
Including: A full head face mask
Material: Latex
------------------Dp full head face mask,dark red color, great mask for cosplay.
Made of high-grade latex material, it's non-toxic and environmentally friendly.
Head size: about 57cm; Fits teens
10. LEXIN ELECTRONICS DESIGN FOR BIKE LEXIN 2x BT Interphone Bluetooth Motorbike Motorcycle Helmet Intercom Headset 1000m Rider
Feature
Thank you for choosing the LX-R6, Motorcycle 6 Rider Large Group 1000M full-duplex stereo Bluetooth wireless helmet headsets, designed for installation into most open-face, flip-front and full-face style helmets.With the LX-R6, you can call hands-free on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations by Bluetooth wirelessly, and have intercom conversations in full duplex with a passenger or multi-pair up to 6 Riders in a large group and talk between any 2 of them in a range of 1000M (3,280 feet) distance.
The LX-R6 is compliant with the Bluetooth Specification v2.1 supporting the following profiles: Headset Profile, Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP). Please check with the manufacturers of other devices to determine their compatibility with this headset.
Superior audio fidelity has been achieved with our wide-fidelity, non-ported and ultra-slim helmet speakers. This headset also provides the industry's best combination of wind and ambient noise reduction with the miniature boom microphone.
Main unit is powered by a rechargeable Lithium Ion/Polymer power cell providing 8-12 hours of use from a full charge.
Description
Full Duplex Wirless Bluetooth Handsfree Intercom CommunicationUp to Pair 6 Riders & Talk Between Any 2 of Them
1,000M (3,280 Feet) Intercom Range
A2DP Bluetooth for Wireless Music & Audio GPS Direction
High-End Supreme Sound With Advanced Noise Cancellation Technology
Auto Receiving Cellphone Calls & Intercom Calls
3.5mm Line-In For External Audio Device
Waterproof Design, Handles All Weather Conditions
Plug Earphone & Microphone In Helmet - Fits Into The Ear Well Of All Standard Helmet
Up to 120km/h Speed
Up to 8 Hours Talk Time, 150 Hours Standby Time
Package Includes:
2 x LX-R6 Main Unit
2 x Slim 5mm Hi-Fi Stereo Speaker
2 x Boom & Velcro Microphone for both full-face and open-face style helmet
2 x Mounting Bracket & Clamp
2 x DC Power Charger (We have US/AU/EU adapter, will send it depend on your country, you can also tell us the adapter you need)
2 x USB Cable
1 x User Manual
Recent Comments