Thing need consider when find petg red?
When you looking for petg red, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable petg red is not an easy task. In this post, we show you how to find the right petg red along with our top-rated reviews. Please check out our suggestions to find the best petg red for you.
1. eSUN 3D 1.75mm PETG Red Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Solid Opaque Red
Feature
1KG net (approximately 2.2 lbs) Filament with Clear SpooleSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red, solid blue, solid gray, solid green, solid yellow, solid purple, solid gold, solid silver
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 230C - 250C
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"
Description
eSUN 3D Printer Filament: PETGExtrusion Temperature Range: 230 Celsius to 250 Celsius
Plate temperature: 80~90_ or without heated
Printing speed: 30~60mm/s
Moving speed: 30~60mm/s
Advantages of PETG: PETG is an excellent material which combines the advantages of both PLA and ABS. Odorless; Little shrinkage rate; hydrophobicity (Will not absorb water and as such clog the extruders); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish;
2. YOYI 3D PETG Filament 1.75mm PETG 3D Printer Filament 1KG Diameter Tolerance +/- 0.05 mm, 1 KG Spool, 1.75 mm PETG (Red)
3. PRILINE PETG-1KG 1.75 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1kg Spool, 1.75 mm, Red
Feature
Material: PETG (Polyethylene terephthalate glycol) - Color: Red - Weight: 1 KG (approximately 2.20 lbs) SpoolSize: 1.75mm (Tolerance Level : 0.03mm) - Spool Diameter: 7.87" - Spool Width: 2.83" - Spool Hub Hole Diameter: 2.20"
Recommended Printing Temp/Nozzle Temperature: 230-260C(446-500F) - Base Plate Temperature: 50-100C(122-212F)
" PROPER TEMPERATURES VARY BY MACHINE AND PRINTING CONDITIONS, IF EXTRUDING PROBLEMS PLEASE TRY RAISING OR LOWERING TEMPERATURE AS THE FIRST STEP "
Performance Advantages: PRILINE PETG filament is a rigid, tough, high performance material offering excellent clarity, light transmission and high gloss. It's about as stiff as PLA. And is highly resistant to temperatures at above 60C(140F)
Refund Guarantee in 30 Days: We trust our products. If you aren't happy with our 3D printer filament, tell us and We will arrange a refund for you
Description
PETG 3D Printer Filament
Material Characteristics:
1. PRILINE PETG (Polyethylene terephthalate glycol) filament has good load capacity and high tensile strength, impact resistance and is more durable than PLA. It also has no odour which allows easy printing indoors. It doesn't warp and is recyclable making it better for the environment. It's a kind of new light plastic.
2. IPRILINE PETG filament is ideal for most 3D printers (with print heads that are suitable for 250C/482F), and can be easily printed on most printing substrates, such as glass, Bluetape, crepe tape and Buildtak.
3. Due to its high layer adhesion and resistance, PETG is optimally suited for manufacturing mechanically stressed components.
Product Details:
1. 1 KG (approximately 2.20 lbs) Spool
2. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
3. Recommended Printing Temp/Nozzle Temperature: 230-260C(446-500F), Base Plate Temperature: 50-100C(122-212F)
4. Spool Diameter: 7.87" - Spool Width: 2.83" - Spool Hub Hole Diameter: 2.20"
5. High Compatible With Your 3D Printer: For common all 1.75 mm specification 3D printers such as Ultimaker, Zortrax, Lulzbot, BCN3D , FlashForge, Makergear, MakerBot, Prusa, CEL, Robo.
PRILINE 3D Printer Filament Storage Tips:
After each print, we recommended storing printer filament in a sealed plastic bag or box to prevent be affected with moisture.
Friendly Reminder(After Use):
Be sure to insert the free end of the filament into the hole to avoid the filament being tangled for next time use.
PROPER TEMPERATURES VARY BY MACHINE AND PRINTING CONDITIONS, IF EXTRUDING PROBLEMS PLEASE TRY RAISING OR LOWERING TEMPERATURE AS THE FIRST STEP
4. AmazonBasics PETG 3D Printer Filament, 1.75mm, Red, 1 kg Spool
Feature
3D printer filament with 1.75 mm diameter + / - .05 mm; designed to fit most common 3D printers (check spool size for compatibility); Red; 1 kg spoolMade of PETG plastic, known for its ease of use (like PLA) and durable strength (like ABS); no heating bed needed; offers easy bed adhesion, stiffness, and a glossy type finish
Spool's built-in gauge shows percentage of material remaining and approximate length remaining
Engineered to reduce jamming; resealable storage bag included to protect filament between use
Measures 9.2 by 8.3 by 3 inches (LxWxH); weighs 2.2 pounds; backed by an AmazonBasics 1-year limited warranty
Description
An Amazon Brand.5. SUNLU 1.75mm PETG Red 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, 2.2 LBS (1KG) Spool,1.75 mm PLA 3D Filament for Most 3D Printer & 3D Printing Pen, PETG Red
Feature
Material: PETG - Color: Red - Weight: 1 KG (approximately 2.20 lbs) Spool.PETG Recommend Temperature: Extrusion/Nozzle Temperature 190C - 220C (356F - 410F),PLA fialment can be processed at 185 degrees.
High Compatible With Your 3D Printer: Whatever all 1.75 mm-specification 3d printers in the market are configured to run with the PLA 3D printing filaments.
You'll Have Zero Hassle Printing: Compared with traditional brittle PETG, SUNLU 3D printer filaments have adjusted the degradability of the material for optimal performance,so SUNLU PLA filaments are not brittle during 3D printing jobs.
30-Day Money-Back Guarantee: We are so confident in our 3D printer fialment that we offer a full 30-day guarantee.Buy it,use it and if you aren't happy with it,tell us and we'll refund your money.
Description
Product Features:
SUNLU PETG3D Printer Filament is especially designed and developed for most 3D printer on the market today. Its main features are as follows:
1. SUNLU PLA gives off a smell similar to a semi-sweet cooking oil. While it certainly won't bring back fond memories of home-cooked meals, it is considered by many an improvement over hot plastic.
2. SUNLU PLA displays less warping. This is the reason why it is possible to print without a heated bed.
3. SUNLU PLA filament is made for 3D printers with degradable bio-plastic.
4. SUNLU PLA filament Printed objects will generally have a glossier look.
5. SUNLU PLA 3d printing filament is compatible with most commercially available non-cartridge based 3D printers. 6. Backed by our 100% SATISFACTION GUARANTEE.
Product specifications:
Brand: SUNLU
Material: PLA
Diameter: 1.75mm
Tolerance: +/- 0.02mm
Print temperature: 190-220374-428
Print speed: 50-100mm/s
Baseplate temperature: No heating required
Bubble: 100% zero-bubble
Length: 1.75mm (1kg=2.20 lbs) = 330m
Quick start guide for PLA printing material
The first layer is the most important part of any print. There are a few things you need to do to get the first layer to stick well.
1. You need the print bed (or print surface) to be level.
2. You need the extruder to be homed to the correct height from the bed.
3. You need a good base material for your PLA to adhere to.
How to store:
1. Keep material in sealed bag until ready for use.
2. Avoid Water. Keep in dry place.
3. Keep away from heat.
4. Recommended storage temperature: -20 to 5068-122
SUNLU PLA 3D Printer Filament, "Add to Cart" right now & Enjoy 90 Days Money Back and 2-Year WARRANTY!
Alibaba wholesale station: https://sunlugw.en.alibaba.com
Globalsources wholesale station: http://sunlugw.manufacturer.globalsources.com
6. eSUN 3D 3mm PETG Solid Red Filament 1kg (2.2lb), PETG 3D Printer Filament, Actual Diameter 2.85mm +/- 0.05mm, Solid Opaque Red
Feature
1KG net (approximately 2.2 lbs) Filament with Clear SpooleSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red, solid blue, solid gray, solid green, solid yellow, solid purple, solid gold, solid silver
3mm Filament. 2.85mm Actual Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 230C - 250C
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"
Description
This is 3mm/2.85mm filament. Please make sure your printer can support 2.85mm filament before buying this filament. This filament does not support 1.75mm 3D printers such as CR-10, FlashForge, Wanhao, MakerGear, Monoprice select and Prusa. This filament supports all 2.85mm open standard 3D printers such as Lulzbot and Ultimaker. Verify your printer before purchasing to avoid unnecessary returns.
eSUN 3D Printer Filament: PETG
Size: 3mm
Extrusion Temperature Range: 230C to 250C
Plate temperature: 80~90C or without heated
Printing speed: 30~60mm/s
Moving speed: 30~60mm/s
Advantages of PETG: PETG is an excellent material which combines the advantages of both PLA and ABS. Odorless; Little shrinkage rate; hydrophobicity (Will not absorb water and as such clog the extruders); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish;
7. 3D Solutech See Through Red 1.75mm PETG 3D Printer Filament 2.2 LBS (1.0KG)
Feature
1.75Mm see through Red petg filamentFor common 3D printers such as makerbot, RepRap, finial, up, Mendel, flash forge, sol doodle 2, printout lc, maker gear M2 and etc
Backed by our 100 percent satisfaction guarantee
Temperature range is 200c - 220c
Made in the usa
Description
Ultra smooth technology our ultra smooth technology includes filaments capable of beautiful and smooth Extraction to help build even the most delicate objects. Vacuum sealed we use vacuum-sealed packaging to isolate the moisturized environment and filament, and provide the best performance possible. High compatibility our filaments have been tested on various 3D printer brands, receiving widespread and positive customer feedback. 100 percent USA 100 percent of the materials used in our products are grown and made in the USA. 3D Solutech is a professional filament manufacturer specializing in providing a wide range of colors and materials for 3D printing. Quality is always our top priority, and we check each spool, vacuum seal, and package by hand to ensure optimal product quality. Our filament is a proven winner, and maintains the smooth and consistent printing experience needed to achieve the best printing results. Our filament is always round, and contains no oily residue, air bubbles, kink, use or breaks. Check out our store for the latest colors and materials for your 3D printer. Package includes: 1 x 1.75mm see through Red PETG filament (2.2lbs) 1 x filament clip.8. PETG Red Filament 1.75mm 1KG Spool TIANSE Filament for 3D Printing, Dimensional Accuracy +/- 0.03 mm
Feature
Material: PETG (Flexible,Toughness) - Color: Red. Pack with Vacuumed SealedWeight: 1 KG (approximately 2.20 lbs) Spool
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
For common 3D printers such as MakerBot, Reprap, Afinia, UP, Mendel, flashforge, Solidoodle 2, Printrbot LC, MakerGear M2 and etc.
100% Satisfaction Guarantee: 2-Year Warranty and 24*7 customer support with technical advice
Description
High quality 1.75mm Red PETG filament .Product Description
Material: PETG
Color: Clear
Weight: 1KG (approximately 2.2 lbs)
Diameter: 1.75mm
Tolerance: +/- 0.02mm
Print temperature: 220C - 250C (428F - 482F )
Print speed: 50-100mm/s Platform temperature: No Need
Bubble: 100% no-bubble
About Tianse 3D Printing Supplies:
Choose Tianse and start your amazing 3D journey!
PLA has low shrinkage rate, even print larger models perform well.
Density is small, when printing larger volume model lighter, economical.
Manufactured to very tight tolerances and a wide extruder temperature range, making for smoother 3D printing, and fewer extruder nozzle problems.
Eco-friendly, low shrinkage, high strength and good toughness.
To be applied to a variety of FDM 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc.
After-sales service:
100% satisfaction is guaranteed by 2-YEAR WARRANTY for refund or replacement, and 24 x 7 professional customer support providing technical solutions.
Please feel free to contact us via email or Q&A, we will answer within 24 hours.
9. 3D BEST-Q PETG 1.75mm 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1KG Spool, Transparent Red
Feature
Material: PETG - Color:Transparent RedWeight: 1 KG (approximately 2.20 lbs) Spool
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
Recommended Extrusion/Nozzle Temperature: 220C - 260C Base Plate/Print Bed Temperature: No heated/(50 - 80)C
Bubble: no-bubble
Description
Welcome to 3D BEST-QOur company specializes in producing 3D printer filament, because of the focus so professional.Our motto is: nothing is more important than quality,we try our best to do the best quality.
Why we focus on the quality?
Only the highest quality can meet our customers,and make every customer satisfied is our NO.1 mission.
Compare with most materials in market,our products advantage is its modified property.
1. High purity:BPA free, modified PETG compliance with FDA food certification and meet 3D printing requirement.
2. Fast dry:Print speed can be accelerated,suitable for those machines that print quickly.
3. High hardness and tenacity:The printed parts can be used directly,and print larger models perform well.
4. Appropriate adhesion: It is adhesive well between the layers.
5. Good performance of temperature,its heat deflection temperature is about 70, higher than PLA in market.
6. UV resistant,excellent anti-aging,good resistance to abrasion.
7. High Compatibility:It suit a variety of FDM 3D printer,for example:Cube,makerbot and Mendel.
Sincerely hoping that you choose our products to start your colorful life!
10. Stronghero3D 3D Printing PETG Filaments 1.75mm Net Weight 1KG Accuracy +/-0.05mm (Translucent Red)
Feature
Nice shiny ,translucent color, smooth surface1kg/Spool,Vacuumed Sealed With Desiccant inside,then in small box.
Recommended Printing Temperature: 230-250C(446-482). 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm).
Strong layer adhesion Hardly shrinking 0.2-0.5%, barely warping Tough and break resistant: Strength 105R,Slight gloss in finish,Resistant to acids and alkalis and Does not absorb water.
We make each roll and each point been inspection qualify,hard quality control
Description
PETG (Polyethylene terephthalate glycol-modified)3D Printer filament is a rigid, tough, high performance material offering excellent clarity, light transmission and high gloss. PETG 3D Printer filament is stronger than PET, and is about as stiff as PLA low smell, health and savety NO warp,NO jam,NO burbles,No cracking PETG filament has good load capacity printing of ABS and PLA filament, and it's a perfect alternative.
we make each roll and each point been inspection qualify,hard quality control 1 KG (approximately 2.20 lbs) Spool ,1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) PETG 3d Printer filament has high tensile strength, impact resistance and is more durable than PLA. It doesn't warp and is recyclable making it better for the environment. A new light plastic.
Product Features 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) Vacuumed Sealed With Desiccant Recommended Extrusion/Nozzle Temperature 250-275C(482-527) Heat bed 100 C (220) Spool Diameter: 7.87" - Spool Width: 2.83" - Spool Hub Hole Diameter: 2.95" Length: 330m
Quality You Can Trust Strong Toughness: Manufactured to very tight tolerances and a wide extruder temperature range, making for smoother 3D printing, Due to its high layer adhesion and resistance, PETG is optimally suited for manufacturing mechanically stressed components. Compatible with all FDM 3D printer such as Makerbot, Mendel, Prusa, Huxley, BFB series, RepRap, Rapman, Solidoodle etc. Healthy: All of products have passed the RoHS CEREACH standard..
Recent Comments