Looking for a fluke 117 amp clamp? Have a look at this 2018 guide!
When you want to find fluke 117 amp clamp, you may need to consider between many choices. Finding the best fluke 117 amp clamp is not an easy task. In this post, we create a very short list about top 7 the best fluke 117 amp clamp for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 7 fluke 117 amp clamp:
1. Fluke 323 True-RMS Clamp Meter
Feature
Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms. Does not measure DC currentTrue RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit
Audible continuity sensor confirms that the circuit conducts electricity
Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
Description
The Fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. The Fluke 323 323-AMZN is ideally suited for current measurements up to 400 a in tight cable compartments.2. Fluke 117/323 KIT Multimeter and Clamp Meter Combo Kit
Feature
The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC ampsThe 117 multimeter features true-rms for accurate measurements on non-linear loads
The 117 multimeter features Low input impedance which helps prevent false readings due to ghost voltage
The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non-linear signals
The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage
Description
The Fluke 117/323 KIT Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit Fluke 117/323 KIT Fluke Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit pairs the Fluke 117 multimeter with a Fluke 323 clamp meter for productive and effective troubleshooting in one total solution, including the new C115 durable soft carrying case for protection and easy meter transportation. Replaces: Fluke 117/322 KIT3. Fluke 324 40/400A AC, 600V AC/DC True-RMS Clamp Meter with Temperature, Capacitance Measurements
Feature
Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohmsTrue RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit
Audible continuity sensor confirms that the circuit conducts electricity
Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V.Maximum Operating Temperature:+50C
Slim, ergonomic design
Large, easy to read backlight display
CAT IV 300V/CAT III 600 Volt safety rating
Hold button
Temperature and capacitance measurement
Description
The Fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. The Fluke 323 323-AMZN is ideally suited for current measurements up to 400 a in tight cable compartments.4. Fluke i400 400 Amp AC Current Clamp
Feature
Companion to a digital multimeters to measure up to 200A AC1mA per amp output guarantees easy reading on you meter
Take accurate current readings without breaking the circuit
Maximum conductor diameter 20mm, CAT III 600V safety rating
Companion to your DMM to measure up to 400 A AC
1mA/Amp output guarantees easy reading on you meter
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a very compact shape
Soft non-slippery overmold handle prevents from accidental touching live wiring
Description
Fluke Current clamps are the ideal tools to extend the current ranges of Multimeters. The clamp is a single range ac current clamp with current output via safety shrouded banana plugs. The clamp is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs. 1mA per Amp output guarantees easy reading on you meter. Take accurate current readings without breaking the circuit.5. Fluke I410-KIT AC/DC Current Clamp Kit with Carry Case, 600V Voltage, 400A AC/DC Current
Feature
Kit includes i410 1-400A AC rms, 1-400A DC current Clamp, zippered vinyl carry case with moveable dividerSpecial value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM
Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals
1mV/Amp output guarantees easy reading on your meter
Take accurate current readings without breaking the circuit
Description
Kit includes i410 1-400A AC rms, 1-400A DC current Clamp, zippered vinyl carry case with moveable divider. Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals. The Fluke i410 AC/DC 400 Amp current clamp meets CAT III 600V safety ratings and can take accurate current readings without breaking the circuit. Fluke current clamps are the ideal tools to extend the current ranges of Fluke tools. Battery-powered hall-effect probe measures 1A to 400A. 1mV/Amp output guarantees easy reading on your meter. Take accurate current readings without breaking the circuit. Maximum conductor diameter 32mm. One year warranty. Measurement type: Hall sensor. Nominal current range: 400A, AC/DC. Continuous current range: 1A - 400A AC/DC. Maximum non-destructive current: 400A. Lowest measurable current: 0.5A. Basic accuracy: 3.5 percent + 0.5A (percent reading + floorspec). Useable frequency: DC - 3 kHz. Output levels: 1 mV/A. Zero error adjustment. Maximum voltage: 600V. Battery life: 9 V, 60 H. Maximum conductor diameter: 30mm, 2 x 25mm. Output cable length: 1.6m. With shrouded banana plugs.6. Fluke A3000 FC Wireless AC Current Clamp Module
Feature
The Fluke a3000 FC Wireless AC Current Clamp Module is a fully functional true-RMS current clamp meter that wirelessly relays measurements to other Fluke Connect enabled master unitsFluke 3000 FC DMM
Fluke Ti200/300/400 Infrared Camera
The Fluke a3000 FC Wireless AC Current Clamp Module has all the essentials for convenient test and measurement troubleshooting:
True-RMS AC clamp meter
Description
Clamp on meters are designed with jaws that open and close to fit around a conductor to measure AC or DC currents.7. FLUKE 362 True-rms AC DC Clamp Meter
Feature
The lead time is about 2-3 days. FedEx/DHL shipping time is about 5-7 days.If any questions, please do not open any claims, please contact us first.
Description
Features:
compact design, allows single handed operationLarge-screen display of 2000 characters
200A AC and DC current, 600V AC & DC voltage measurement
3000 ohm resistance range, continuity test
Zero function, can be cleared for DC measurement
Non-detachable jaw clamp
Security level: CAT III 600V
Specifications:
1. AC CurrentRange:200
Resolution:0.1A
Accuracy:2 % 5 counts(45-65Hz);2.5% 5 counts (65-400Hz)
2. DC Current
Range:200
Resolution:0.1A
Accuracy:2% 5 counts
3. AC Voltage
Range:600 V
Resolution:0.1V
Accuracy:1.5% 5 counts (45-400Hz)
4. DC Voltage
Range:600 V
Resolution:0.1V
Accuracy: 1% 5 counts
5. Resistance
Range:300/3000
Resolution:0.1/1
Accuracy: 1% 5 counts
6. Continuity Test:<=70
7. Size
Dimensions:2056022
Clamp opening:18mm
Weight (g):196
8. Security Level:CAT III 600V
Recent Comments