List of the Top 10 acrylic adhesive you can buy in 2018
When you want to find acrylic adhesive, you may need to consider between many choices. Finding the best acrylic adhesive is not an easy task. In this post, we create a very short list about top 10 the best acrylic adhesive for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 acrylic adhesive:
1. SCIGRIP 16 10315 Acrylic Cement, Low-VOC, Medium bodied, 5 Ounce Tube, Clear
Feature
16: Medium bodied, fast-setting, high-strength solvent cement for bonding acrylicIt will also bond rigid PVC, ABS, styrene, butyrate, polycarbonate to themselves and each other, as well as other plastics and porous surfaces
Low VOC
Description
SCIGRIP offers unique adhesive solutions for bonding a range of substrates including metals, thermoplastics, and thermoset composites .2. SCIGRIP 16 Acrylic Cement, Low-VOC, Medium bodied, 1 Pint Can with Screw-on Cap, Clear
Feature
16: Medium bodied, fast-setting, high-strength solvent cement for bonding acrylicIt will also bond rigid PVC, ABS, styrene, butyrate, polycarbonate to themselves and each other, as well as other plastics and porous surfaces
Low VOC
Description
SCIGRIP offers unique adhesive solutions for bonding a range of substrates including metals, thermoplastics, and thermoset composites .3. Aron Alpha Type 232 (300 cps) Fast Set Instant Adhesive 20 g (0.7 oz) Bottle
Feature
Ultra fast curing, ethyl-2 cyanoacrylate instant adhesive; Engineered for tough-to-bond situationsMedium viscosity (300 cps) especially suited for porous materials; Gap fill up to 0.005 inches.
Fixture time within 3 seconds on rigid PVC, 3 seconds on Neoprene; 5 seconds on PMMA (Acrylic plastic), 3 seconds on ABS, 10 seconds on Steel, Stainless Steel, Full cure 24 hours
Tensile strength (PSI) on rigid PVC, rigid PVC to Steel: 1,000*, PMMA, ABS: 710*, Steel: 2,840, Stainless Steel: 2,560, Neoprene: 70*. * = substrate or material failure
Description
Aron Alpha Industrial Krazy Glues 200F series instant adhesives are engineered for tough-to-bond situations. Ultra fast setting formula excellent for porous surfaces. Bonds plastic, metal and rubber. Type: 232, Typical Use: Medium viscosity especially suited for porous material including wood and leather. Color: Clear, Gap Fill: 0.006", Resin Base: Ethyl, Viscosity Cps: 300, Tensile Strength Steel (PSI): 2,840, Temperature Range: -65F - 180F, Cure Speed Fixture: 15 Sec, Full Cure: 24 Hrs.4. IPS Weld-On 3 Acrylic Plastic Cement with Weld-On Applicator Bottle with Needle, 4 oz Can, Clear
Feature
Very Fast-Setting Solvent Cement for Bonding AcrylicColor: Clear
Contents of Can: 4 fl oz
Applicator Bottle with Needle
Hazardous Material - No Air Shipments
Description
Very Fast-Setting Solvent Cement for Bonding Acrylic. WELD-ON 3 is a water-thin, non-flammable cement formulated to quickly develop high strength, clear bonds to many thermoplastic substrates, particularly acrylic. The bond is achieved by first softening the surfaces to be joined and then fusing them together with dissipation of the solvent. The initial bond forms within a few minutes and quickly increases in strength. Substantial strength will be obtained within only a few hours. Under certain conditions, especially with high humidity, a white mark on the plastic (commonly called blushing) may sometimes be encountered. Where a more blush resistant cement and longer open time is required, WELD-ON 4 is recommended. Weld-On 3 Acrylic Adhesive is a water thin, very fast set, solvent type adhesive for acrylics. It also bonds other plastics such as styrene, butyrate, and polycarbonates to themselves. Does not bond to cross-linked acrylics. SUBSTRATE RECOMMENDATIONS : WELD-ON 3 is formulated for cementing acrylic (poly-methyl methacrylate) plastic to itself. It will also form strong bonds with other thermoplastics such as polystyrene, CAB (cellulose acetate butyrate), PETG (polyethylene terephthalate glycol) and polycarbonate to themselves. It is not recommended for cross-linked acrylic. SUGGESTED BONDING APPLICATIONS AND RECOMMENDATIONS: WELD-ON 3 is used extensively in sign fabrication. Strong butt joints are made with fat sheets by using the soak method for such applications as cementing letters to acrylic panels. Butyrate trim-capping of acrylics is another highly recommended use for WELD-ON 3 . It is also widely used in the POP industry (e.g. display), and in the fabrication and bonding of plastic containers, housewares, bottles and many other applications using the capillary method. Color: Clear Contents of Can: 4 fl oz Ship Via: Hazardous Material - No Air5. Caseway SC-125 Acrylic/Plexiglass Adhesive Solvent Cement - 1 Pint (16 oz)
Feature
Exceptionally fast-setting cementFor cementing acrylic to itself and other plastics such as polycarbonate, styrene, and butyrate (CAB.)
Shipping by ground transport only.
Defined as hazardous material. Cannot be returned.
Description
SC-125 is formulated for cementing acrylic to itself and other plastics such as polycarbonate, styrene, and butyrate (CAB). Strong joints are made by using the "soak method." Solvent cementing depends on the softening and intermingling of the two surfaces to be joined so that there is actual cohesion between the materials themselves. After assembly, the solvent evaporates or dissipates through the material and a hard, clear joint is obtained. The choice of cementing technique will depend on the type of joint to be cemented. Please note that when cementing acrylic in high humidity, SC-125 may leave white marks on the acrylic- referred to as "blushing." Under these conditions, or when bonding extruded acrylic, SC-94 is recommended.6. Weldon #4 with Applicator Bottle - 1/4 Pint - 4oz - 10308 - 1 each
Feature
SCIGRIP 4 is formulated as a blush-resistant cement for bonding acrylic to itself.2 Years Shelf Life, 1-2 Min Working Time, 3 Min Fix Time. UN 1992, PG II
Used in applications like display and presentation case fabrication and medical equipment assembly.
Less likely to leave white marks (commonly called blushing.)
Used in the manufacture of numerous solvent welded structures and subassemblies using the capillary method.
Description
SCIGRIP 4 is a water-thin, somewhat flammable cement formulated to quickly develop very clear and high strength bonds for many thermoplastic substrates. The bond is achieved by first softening the surfaces to be joined and then fusing them together with the dissipation of the solvent. The initial bond forms within a matter of minutes and is followed by a significant and continual increase in bond strength over the next several hours. SCIGRIP 4 may be preferred by some plastic fabricators because it is less likely to leave white marks (commonly called blushing). For similar applications but faster setting cement, SCIGRIP 3 is recommended.7. Trim-Lok D-Shaped Rubber Seal EPDM Foam Seal with HT (General Acrylic) Pressure Sensitive Adhesive System Ideal Door and Window Weather Seal for Cars, Trucks, RVs, and Boats 0.375 Height, 0.75 Width, 500 Length
Feature
DURABLE EPDM FOAM RUBBER drowns out noise, eliminates vibration, and protects your vehicle, boat, or home from outside elements.WEATHER-RESISTANT rubber D-seals provide excellent resistance to water absorption, ozone, sunlight aging, low temperature and compression set.
EASY TO INSTALL adhesive-backed rubber seals made with two adhesive options: BT (3M) tape is a high-strength automotive-grade tape, while HT tape is a general-purpose pressure sensitive adhesive.
WIDE RANGE OF APPLICATIONS on marine, automobile, and home cases - providing door, window, and hatch seals for cars, trucks, RVs, trailers, boats, and more!
VARIETY OF DIMENSIONS AND SIZES available to fit your application need - allowing for the right size D-shaped seal to be applied to the job.
Description
Rubber Seals create an easy-to-close seal against dust, noise, and vibration. To prepare, cut to length with scissors or knife. Prior to installation, ensure bonding surface is properly cleaned with a 50/50 mix of denatured alcohol and water solution. The D-Shaped Rubber Seals are available with two adhesive application options: high-strength foam acrylic adhesive (BT) and general-purpose pressure sensitive adhesive (HT). The (BT) adhesive creates an airtight seal between the rubber and substrate and has low initial tack for easy repositioning. The (BT) high strength tape system creates the ultimate bond between the rubber and substrate, has the highest peel and shear resistance, and can be used under high loads of stress and force. Also, it has low initial tack for easy repositioning during installation and requires 72 hours of cure time for full bond strength. The general-purpose pressure sensitive adhesive (HT) is ideal for light-duty applications and is best used to hold the rubber seal in place while installed in a static application or compressed between two stationary objects. (HT) may be used in some light duty dynamic applications against a variety of substrates.8. IPS Weld-On 16 Acrylic Plastic Cement with 6 Pieces Weld-On Micro Tips, 5 oz Tube, Clear
Description
Weld-On 16 Acrylic Cement - 5 Oz Tube and Pack of 6 Weld-on Micro Tips Medium bodied, fast-setting, high strength acrylic cement. WELD-ON 16 is a very high strength, clear, medium bodied, fast curing, solvent-type acrylic cement. Applied to cast, molded or extruded acrylics, it will affect initial bonds very quickly so some parts may be handled within a few minutes. Bond strength continues to develop very rapidly reaching a substantial level and forming strong joints within hours. SUBSTRATE RECOMMENDATIONS : WELD-ON 16 is especially formulated to bond acrylic (poly-methyl methacrylate) plastic. It can also be used for bonding styrene, butyrate, PVC, ABS and polycarbonate, as well as other plastics and porous surfaces. SUGGESTED BONDING APPLICATIONS: WELD-ON 16 is recommended as an excellent general purpose, high strength acrylic cement. It is especially useful where fast cure and high strength are desired for applications such as large housings, signs, plastic letters, industrial fabrications, display items, lenses and models. Color: Clear Contents of Tube: 5 oz (44 ml) Ship Via: Hazardous Material - No Air Shipments9. Surebonder H-810R High Performance Acrylic Adhesive Glue Sticks, 10-Inch
Feature
Adhesive is strong and remains flexibleDesigned for adhering to a variety of hard to bond substrates
Glue sticks; 7/16-Inch diameter
10-Inch length
Clear color
Description
Surebonder H-810R High Performance Acrylic Adhesive Glue Sticks are a unique high-performance acrylic adhesive specifically designed for adhering a variety of hard to bond substrates including: plastic, wood, vinyl, glass, carpet tack strips, flooring applications and ceramic. Allows a flexible open time of 60-80 seconds suitable for a wide range of applications and a quick bond for maximum productivity. Acrylic hot melt glue sticks bond substrates when other melt glues fail. 7/16-Inch diameter by 10-Inch length. 8 sticks per bag.10. Loctite Epoxy Plastic Bonder 0.85-Fluid Ounce Syringe (1363118 )
Feature
BonderBonds nylon, polycarbonate, Mylar, PVC, Acrylic, ABS, stainless steel and many other plastics
Resistant to solvents, gasoline, diesel fuel and motor Oil
Extremely resistant to high humidity, moisture and impact
0.85 oz
Recent Comments