Best pure wave inverter 220v for 2018
Finding your suitable pure wave inverter 220v is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best pure wave inverter 220v including detail information and customer reviews. Let’s find out which is your favorite one.
1. 32000W peak 8000W LF Split Phase Pure Sine Wave Power Inverter DC 24V to AC 110V&220V 60Hz, with 120A BC / UPS / LCD display
Feature
Split Phase function: AC output as belows: Two white AC output sockets, output is all 110V, One hard wire terminal marked L1,N, L2, L1 + N = AC 110V L2 + N = AC 110V L1 + L2 = AC 220VNOTE: can not L1 + N+ L2. For AC 220v, 100% full power For AC 110v, 50% half power.
WITH 120A BTY CHARGER function for AC 220v 60Hz home grid.
NOTE: AS THIS IS SPLIT TYPE, LCD only show 220v voltage , watt, amp, did not show 110v spec, pls note, if this you can not accept it, pls think about carefully before buying this inverter.
Location: USA. For stronger/upgraded version, please refer to ASIN# B07BK7L6XP or this link: https://www.amazon.com/dp/B07BK7L6XP
Description
*Specification :DC Input Voltage: 24V
AC Output Voltage: 110V & 220V
Regulation: 5%
Frequency: 60HZ3%
Efficiency: 90%
Output Wave Form: Pure Sine Wave
Temperature Protection: 70C
Input Low Voltage Alarm: 21V
Input Low Voltage shutdown: 20V
Input High Voltage Alarm: 28V
Input High Voltage shutdown: >29V
No load current draw when power save on: 0.7-0.8A
No load current draw when power save off: 3.5-4.0A
Certificate: CE
*Warranty: 1 year (Winthin one month since the customer receive this, if the inverter has problem, just contact me on the details, we can send the parts with free charge only one time. If over one month to one year, the shipping cost for the parts will be paid by the customer, but the parts is free.)
*Note: As this unit could have parts loosing caused during transportation, so please DO check item carefully before testing. If the inverter is damaged by the courier seriously please report this to the courier right away.
*If you only connect battery with load, ac cable unconnected, when you switch to battery charger mode, this means power save mode on, in this moment the condition as follows: The inverter will go to sleeping mode, no load current is 0 AMP, every 3 sec., the inverter will detection itself, after the 3 sec., amp will go to 3 amp (stand by power, time: 1 sec., then back to sleep mode, amp is 0), the inverter will repeat the situation, until you switch to power save off (inverter on, down side)
*If customer needs to use refrigerator, can switch the mode to power save on, as refrigerator only will work every half an hour or one hour , but inverter stay in power save function, no load current is 0 amp, will save power.
*Warning: Inverter must be switched OFF before connecting/disconnecting batteries or AC input/outputs. Failure to do so may result in inverter damage.
2. 32000W peak 8000W LF Split Phase Pure Sine Wave Power Inverter DC 12V to AC 110V&220V 60Hz, with 120A Battery Charger/UPS/LCD display
Feature
Split Phase function: AC output as belows: Two white AC output sockets, output is all 110V, One hard wire terminal marked L1,N, L2, L1 + N = AC 110V L2 + N = AC 110V L1 + L2 = AC 220VNOTE: can not L1 + N+ L2 . For AC 220v, 100% full power For AC 110v, 50% half power.
WITH 120A BTY CHARGER function for AC 220v 60Hz home grid.
NOTE: AS THIS IS SPLIT TYPE, LCD only show 220v voltage , watt, amp, did not show 110v spec, pls note, if this you can not accept it, pls think about carefully before buying this inverter.
Location: USA. For ATS version, please refer to ASIN# B07BHJ2VDT or this link: https://www.amazon.com/dp/B07BHJ2VDT / For stronger/upgraded version, please refer to ASIN# B07BK6WQDP or this link: https://www.amazon.com/dp/B07BK6WQDP . / For stronger ATS version, please refer to ASIN# B073JCMCCS or this link: https://www.amazon.com/dp/B073JCMCCS
Description
*Specification :DC Input Voltage: 12V
AC Output Voltage: 110V & 220V
Regulation: 5%
Frequency: 60HZ3%
Efficiency: 90%
Output Wave Form: Pure Sine Wave
Temperature Protection: 70C
Input Low Voltage Alarm: 10.5-11V
Input Low Voltage shutdown: 10V
Input High Voltage Alarm: 15V
Input High Voltage shutdown: >15V
No load current draw when power save on: 0.8-0.9A
No load current draw when power save off: 4.0-4.5A
Certificate: CE
*Warranty: 1 year (Winthin one month since the customer receive this, if the inverter has problem, just contact me on the details, we can send the parts with free charge only one time. If over one month to one year, the shipping cost for the parts will be paid by the customer, but the parts is free.)
*Note: As this unit could have parts loosing caused during transportation, so please DO check item carefully before testing. If the inverter is damaged by the courier seriously please report this to the courier right away.
*If you only connect battery with load, ac cable unconnected, when you switch to battery charger mode, this means power save mode on, in this moment the condition as follows: The inverter will go to sleeping mode, no load current is 0 AMP, every 3 sec., the inverter will detection itself, after the 3 sec., amp will go to 3 amp (stand by power, time: 1 sec., then back to sleep mode, amp is 0), the inverter will repeat the situation, until you switch to power save off (inverter on, down side)
*If customer needs to use refrigerator, can switch the mode to power save on, as refrigerator only will work every half an hour or one hour , but inverter stay in power save function, no load current is 0 amp, will save power.
*Warning: Inverter must be switched OFF before connecting/disconnecting batteries or AC input/outputs. Failure to do so may result in inverter damage.
3. New ATS 12V 32000W Peak 8000W LF Split Phase Pure Sine Wave Power Inverter DC 12V to AC 110V&220V 60Hz, with 120A BC/UPS / LCD Display - Jeep Version
Feature
This is our 2018 newest version split phase power inverter, upon some buyer's request, we upgrade the inverter with more functions than the old ones, then can man operate it more easily and flexible. 1.Voice Selection (Chinese, English) Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful.2. Hz Selection (50Hz, 60Hz, automatic selection) Hold down the button for 2 seconds, the machine prompts Hz has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the frequency selection was successful. 3. DC alarm voltage adjustment (0.5V) Adjust counterclockwise to reduce DC alarm voltage Adjust clockwise to raise DC alarm voltage
4. AC output voltage adjustment (210V-240V or 105V-135V) Adjust counterclockwise to decrease AC output voltage Turn clockwise to raise the AC output voltage. 5. one more DC cooling fan we add another dc fan on the inverter, for better cooling & long time using without teamp protection.
6. ATS: If the machine is connected to the battery and home mains at the same time, the machine will use Inverter function first. When the battery voltage is lower than 10.5V, the machine will automatically switch to charging mode. In charging mode, the AC output will be from home mains. When the battery voltage rises to 14V, the machine will automatically convert back to Inverter function, when switching the function will not affect the use of appliances.
7. UPS If the machine is connected to the battery and home mains at the same time, the machine priority to use the home mains electricity, if the home mains electricity is failure, the machine will be automatically converted into Inverter function to run the home appliances. About this new Jeep Version, continuous working time is 30% longer than standard version. And the inside transformer is 30% bigger than standard version.
Description
*Split Phase function:AC output as belows:
Two white AC output sockets, output is all 110V,
One hard wire terminal marked L1,N, L2,
L1 + N = AC 110V
L2 + N = AC 110V
L1 + L2 = AC 220V
NOTE: can not L1 + N+ L2 .
For AC 220v, 100% full power For AC 110v, 50% half power.
WITH 120A BTY CHARGER function for AC 220v 60Hz home grid.
NOTE: AS THIS IS SPLIT TYPE, LCD only show 220v voltage , watt, amp, did not show 110v spec, pls note, if this you can not accept it, pls think about carefully before buying this inverter.
*Specification :
DC Input Voltage: 12V
AC Output Voltage: 110V & 220V
Regulation: 5%
Frequency: 60HZ3%
Efficiency: 90%
Output Wave Form: Pure Sine Wave
Temperature Protection: 70C
Input Low Voltage Alarm: 10.5-11V
Input Low Voltage shutdown: 10V
Input High Voltage Alarm: 15V
Input High Voltage shutdown: >15V
No load current draw when power save on: 0.8-0.9A
No load current draw when power save off: 4.0-4.5A
Certificate: CE
*Recycle design, main board, control board or other small board, all can be replaced by yourself; module design, all the tools you need is just screws tools. After 2-3 years dead, just replace PCB board it can has another 2-3 years' life time.
*Warranty time: 2 years for this Jeep Version.(During this time, all PCB parts can be free to offer, but you need pay the shipping cost.)
*Note: As this unit could have parts loosing caused during transportation, so please DO check item carefully before testing. If the inverter is damaged by the courier seriously please report this to the courier right away.
*Warning: Inverter must be switched OFF before connecting/disconnecting batteries or AC input/outputs. Failure to do so may result in inverter damage.
4. 60000W Peak 15000W LF Split Phase Pure Sine Wave Power Inverter DC 24V to AC 110V&220V 60Hz, with 150A BC/UPS / LCD Display
Feature
This new design plus big copper, original design is using cable, however not good enough, using copper can bring the high efficiency & low down the temp., not easy go to temp. protection, especially when you are using 300-400 amps pass through. Also, this is easy to replace the power mos board with only some screws if have problem.For AC 220v, 50% power ; For AC 110v, 50% power. Noted: 110v ac output item can not use for your 220v appliance and also 220v ac output item can not use for your 110v appliance!
WITH 150A BTY CHARGER function for AC 110v 60Hz home grid
This item is mainly design for more heavy load,such as motor machine,and when it works with your appliance,you should connect with a bty bank and the AC side need to connect with your home source first.
Location: USA.
Description
*Specification :DC Input Voltage: 24V
AC Output Voltage: 110V & 220V
Regulation: 5%
Frequency: 60HZ3%
Efficiency: 90%
Output Wave Form: Pure Sine Wave
Temperature Protection: 70C
Input Low Voltage Alarm: 21V
Input Low Voltage shutdown: 20V
Input High Voltage Alarm: 28V
Input High Voltage shutdown: >29V
Certificate: CE
*Warranty: 1 year (Winthin one month since the customer receive this, if the inverter has problem, just contact me on the details, we can send the parts with free charge only one time. If over one month to one year, the shipping cost for the parts will be paid by the customer, but the parts is free.)
*Note: As this unit could have parts loosing caused during transportation, so please DO check item carefully before testing. If the inverter is damaged by the courier seriously please report this to the courier right away.
*If you only connect battery with load, ac cable unconnected, when you switch to battery charger mode, this means power save mode on, in this moment the condition as follows: The inverter will go to sleeping mode, no load current is 0 AMP, every 3 sec., the inverter will detection itself, after the 3 sec., amp will go to 3 amp (stand by power, time: 1 sec., then back to sleep mode, amp is 0), the inverter will repeat the situation, until you switch to power save off (inverter on, down side)
*If customer needs to use refrigerator, can switch the mode to power save on, as refrigerator only will work every half an hour or one hour , but inverter stay in power save function, no load current is 0 amp, will save power.
*Warning: Inverter must be switched OFF before connecting/disconnecting batteries or AC input/outputs. Failure to do so may result in inverter damage.
5. New ATS 24V 32000W peak 8000W LF Split Phase Pure Sine Wave Power Inverter DC 24V to AC 110V&220V 60Hz, with 120A BC / UPS / LCD display
Feature
This is our 2018 newest version split phase power inverter, upon some buyer's request, we upgrade the inverter with more functions than the old ones, then can man operate it more easily and flexible. 1.Voice Selection (Chinese, English) Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful.2. Hz Selection (50Hz, 60Hz, automatic selection) Hold down the button for 2 seconds, the machine prompts Hz has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the frequency selection was successful. 3. DC alarm voltage adjustment (0.5V) Adjust counterclockwise to reduce DC alarm voltage Adjust clockwise to raise DC alarm voltage
4. AC output voltage adjustment (210V-240V or 105V-135V) Adjust counterclockwise to decrease AC output voltage Turn clockwise to raise the AC output voltage. 5. one more DC cooling fan we add another dc fan on the inverter, for better cooling & long time using without teamp protection.
6. ATS: If the machine is connected to the battery and home mains at the same time, the machine will use Inverter function first. When the battery voltage is lower than 21.5V, the machine will automatically switch to charging mode. In charging mode, the AC output will be from home mains. When the battery voltage rises to 28V, the machine will automatically convert back to Inverter function, when switching the function will not affect the use of appliances.
7. UPS If the machine is connected to the battery and home mains at the same time, the machine priority to use the home mains electricity, if the home mains electricity is failure, the machine will be automatically converted into Inverter function to run the home appliances.
Description
*Split Phase function:AC output as belows:
Two white AC output sockets, output is all 110V,
One hard wire terminal marked L1,N, L2,
L1 + N = AC 110V
L2 + N = AC 110V
L1 + L2 = AC 220V
NOTE: can not L1 + N+ L2 .
For AC 220v, 100% full power For AC 110v, 50% half power.
WITH 120A BTY CHARGER function for AC 220v 60Hz home grid.
NOTE: AS THIS IS SPLIT TYPE, LCD only show 220v voltage , watt, amp, did not show 110v spec. *Specification :
DC Input Voltage: 24V
AC Output Voltage: 110V & 220V
Regulation: 5%
Frequency: 60HZ3%
Efficiency: 90%
Output Wave Form: Pure Sine Wave
Temperature Protection: 70C
Input Low Voltage Alarm: 21V
Input Low Voltage shutdown: 20V
Input High Voltage Alarm: 28V
Input High Voltage shutdown: >29V
No load current draw when power save on: 0.7-0.8A
No load current draw when power save off: 3.5-4.0A
Certificate: CE
*Warranty: 1 year (Winthin one month since the customer receive this, if the inverter has problem, just contact me on the details, we can send the parts with free charge only one time. If over one month to one year, the shipping cost for the parts will be paid by the customer, but the parts is free.)
*Note: As this unit could have parts loosing caused during transportation, so please DO check item carefully before testing. If the inverter is damaged by the courier seriously please report this to the courier right away.
*If customer needs to use refrigerator, can switch the mode to power save on, as refrigerator only will work every half an hour or one hour , but inverter stay in power save function, no load current is 0 amp, will save power.
*Warning: Inverter must be switched OFF before connecting/disconnecting batteries or AC input/outputs. Failure to do so may result in inverter damage.
6. WEIKIN pure sine wave power inverter 1000W DC 12V to AC 220V converter
Feature
Converter DC power from the 12V battery into AC 220V to power your home appliance.It has the short circuit protection. And there are fuses to protect your device.
Pure sine wave inverter , the output voltage is 220V
Universal socket , which is available in most of the countries.
This inverter is only for DC 12V use, can NOT be applied to DC 24V.
Description
1) Input Voltage:DC12V
2) Output Voltage:AC220V
3) Continuous Power output:clamp battry 1000W
4) Surge Power Capacite:2000W
5) Output Wavefrom: Pure Sine Wave
6) Frequency: 4% 50Hz
7) Availability Power: more than 90.5%
8) LOW Voltage Range: DC9.6V/DC18.5V
9) Hige Voltage Range: more than DC14.8V/DC28.5
10) No Load current: no less than 0.4A
11) Over Load Protect: more than 1000W
12) Over Heat Protect : more than 60
13) fuse : 2X30A
14) Fans : yes
7. 3000W transformer AC 220V to AC 110V or AC 110V to AC 220V , used for pure sine wave power inverter
Feature
This transformer can transfer AC 220V to AC 110V or AC 110V to AC 220VInput voltage: AC 220V or AC 110V
Output voltage: AC 110V or AC 220V
Output wave form: pure sine wave (Please do note this is just a transformer, not an inverter.)
This transformer only suits for pure sine wave inverter that below 3000 watts.
Description
This transformer can transfer AC 220V to AC 110V or AC 110V to AC 220V. Dimenison: 23*23*15cm Weight: 7kgs , Warranty: 1 year8. 60000W Peak 15000W LF Split Phase Pure Sine Wave Power Inverter DC 48V to AC 110V&220V 60Hz, with 150A BC/UPS / LCD Display
Feature
This new design plus big copper, original design is using cable, however not good enough, using copper can bring the high efficiency & low down the temp., not easy go to temp. protection, especially when you are using 300-400 amps pass through. Also, this is easy to replace the power mos board with only some screws if have problem.For AC 220v, 50% power ; For AC 110v, 50% power. Noted: 110v ac output item can not use for your 220v appliance and also 220v ac output item can not use for your 110v appliance!
WITH 150A BTY CHARGER function for AC 110v 60Hz home grid
This item is mainly design for more heavy load,such as motor machine,and when it works with your appliance,you should connect with a bty bank and the AC side need to connect with your home source first.
Location: USA.
Description
*Specification :DC Input Voltage: 48V
AC Output Voltage: 110V & 220V
Regulation: 5%
Frequency: 60HZ3%
Efficiency: 90%
Output Wave Form: Pure Sine Wave
Temperature Protection: 70C
Input Low Voltage Alarm: 42V
Input Low Voltage shutdown: 41V
Input High Voltage Alarm: 59V
Input High Voltage shutdown: >60V
Certificate: CE
*Warranty: 1 year (Winthin one month since the customer receive this, if the inverter has problem, just contact me on the details, we can send the parts with free charge only one time. If over one month to one year, the shipping cost for the parts will be paid by the customer, but the parts is free.)
*Note: As this unit could have parts loosing caused during transportation, so please DO check item carefully before testing. If the inverter is damaged by the courier seriously please report this to the courier right away.
*If you only connect battery with load, ac cable unconnected, when you switch to battery charger mode, this means power save mode on, in this moment the condition as follows: The inverter will go to sleeping mode, no load current is 0 AMP, every 3 sec., the inverter will detection itself, after the 3 sec., amp will go to 3 amp (stand by power, time: 1 sec., then back to sleep mode, amp is 0), the inverter will repeat the situation, until you switch to power save off (inverter on, down side)
*If customer needs to use refrigerator, can switch the mode to power save on, as refrigerator only will work every half an hour or one hour , but inverter stay in power save function, no load current is 0 amp, will save power.
*Warning: Inverter must be switched OFF before connecting/disconnecting batteries or AC input/outputs. Failure to do so may result in inverter damage.
9. Holdwell DC 48V to AC 220V AC200-240V Power Pure Sine Wave Inverter 5000W
Feature
1.It is featured as high reliability, and low failure rate, with the advanced double CPU SCM intelligent controlling technology.Low noise but high efficiency while working2.Pure sine wave output, strong ability of driving load, wide range of application
3.Perfect protection functions (Overload protection, inside overheat protection, output short circuit protection, input low-voltage protection, input overvoltage protection), enhanced the reliability of the product
4.Small and light: with the technology of CPU centralized control and SMD inside, the product is very small and light
5.Intelligent control of cooling fan: Using CPU to control the working status of the cooling fans extends the service life of the cooling fans, saves the power and improves the working efficiency
Description
Application:1.In-car or on-boat devices series: military vehicle, police cars, medical ambulance, ships, traffic lights, and etc.
2.Industry equipments series: solar energy, wind power, gas discharge lamp and etc.
3.Office area: Computer, printer, copier, scanner, digital camera and etc.
4.Kitchen utensils series: Micro-wave oven, induction cooker,refrigerator, and etc.
5.House appliance devices: Electric fans, vacuum cleaner, AC, lighting lamps, and etc.
6.Power tool series: electric saw, drilling machine, punching machines, air compressors, and etc.
Functions:
1.BUzzer alarm.
2.Convenient and high efficiency power converter that gives solution for AC power supply.
3.Supplies pure sine wave while normal types mostly supply square or corrected sine wave.
4.CE approved.
Technical Data:
DC input voltage: 48V
AC output voltage: 200-240V
Output wave form: pure sine wave
Output frequency: 50HZ or 60HZ(2%)
THD: <3%
Input Efficiency: >85%
Fuse: 35A*4
Over temperature shut down: Yes
Short-circuit protection: Yes
Over load protection: 120%
Inversed protection: Fuse Inversed
Work temperature: -10c to +50c
Humidity: 20%~90%RH non-dondensation
Storage tmeperature: -30c to +70c
If you need the inverter to run the resistive load (like laptop, TV, electric cooker, LED light), please choose the inverter with continuous power higher than the appliance's rated power. For example, for the power inverter with continuous power 2500w, it is suggested to run the appliance with rated power less than 2500w.
If you need the inverter to run the inductive load(for appliance such as compressor, motor, water pump), please calculate the power of inverter 3 to 7 times higher than the rated power of your appliance.
10. New ATS 24V 32000W Peak 8000W LF Split Phase Pure Sine Wave Power Inverter DC 24V to AC 110V&220V 60Hz, with 120A BC/UPS / LCD Display - Jeep Version
Feature
This is our 2018 newest version split phase power inverter, upon some buyer's request, we upgrade the inverter with more functions than the old ones, then can man operate it more easily and flexible. 1.Voice Selection (Chinese, English) Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful.2. Hz Selection (50Hz, 60Hz, automatic selection) Hold down the button for 2 seconds, the machine prompts Hz has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the frequency selection was successful. 3. DC alarm voltage adjustment (0.5V) Adjust counterclockwise to reduce DC alarm voltage Adjust clockwise to raise DC alarm voltage
4. AC output voltage adjustment (210V-240V or 105V-135V) Adjust counterclockwise to decrease AC output voltage Turn clockwise to raise the AC output voltage. 5. one more DC cooling fan we add another dc fan on the inverter, for better cooling & long time using without teamp protection.
6. ATS: If the machine is connected to the battery and home mains at the same time, the machine will use Inverter function first. When the battery voltage is lower than 21.5V, the machine will automatically switch to charging mode. In charging mode, the AC output will be from home mains. When the battery voltage rises to 28V, the machine will automatically convert back to Inverter function, when switching the function will not affect the use of appliances.
7. UPS If the machine is connected to the battery and home mains at the same time, the machine priority to use the home mains electricity, if the home mains electricity is failure, the machine will be automatically converted into Inverter function to run the home appliances. About this new Jeep Version, continuous working time is 30% longer than standard version. And the inside transformer is 30% bigger than standard version.
Description
*Split Phase function:AC output as belows:
Two white AC output sockets, output is all 110V,
One hard wire terminal marked L1,N, L2,
L1 + N = AC 110V
L2 + N = AC 110V
L1 + L2 = AC 220V
NOTE: can not L1 + N+ L2 .
For AC 220v, 100% full power For AC 110v, 50% half power.
WITH 120A BTY CHARGER function for AC 220v 60Hz home grid.
NOTE: AS THIS IS SPLIT TYPE, LCD only show 220v voltage , watt, amp, did not show 110v spec, pls note, if this you can not accept it, pls think about carefully before buying this inverter.
*Specification :
DC Input Voltage: 24V
AC Output Voltage: 110V & 220V
Regulation: 5%
Frequency: 60HZ3%
Efficiency: 90%
Output Wave Form: Pure Sine Wave
Temperature Protection: 70C
Input Low Voltage Alarm: 21V
Input Low Voltage shutdown: 20V
Input High Voltage Alarm: 28V
Input High Voltage shutdown: >29V
No load current draw when power save on: 0.7-0.8A
No load current draw when power save off: 3.5-4.0A
Certificate: CE
*Recycle design, main board, control board or other small board, all can be replaced by yourself; module design, all the tools you need is just screws tools. After 2-3 years dead, just replace PCB board it can has another 2-3 years' life time.
*Warranty time: 2 years for this Jeep Version.(During this time, all PCB parts can be free to offer, but you need pay the shipping cost.)
*Note: As this unit could have parts loosing caused during transportation, so please DO check item carefully before testing. If the inverter is damaged by the courier seriously please report this to the courier right away.
*Warning: Inverter must be switched OFF before connecting/disconnecting batteries or AC input/outputs. Failure to do so may result in inverter damage.
Recent Comments