Which is the best plasma cutter for cnc?
Finding your suitable plasma cutter for cnc is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best plasma cutter for cnc including detail information and customer reviews. Let’s find out which is your favorite one.
1. Plasma Cutter, Lotos Supreme CUT60D 60Amp Digital Control CNC Non-Touch Pilot Plasma Cutter with Plasma Gouging Function, Non-HF Blowback Arc Start CNC Plasma Cutter, Metal Cutter
Feature
3 PLASMA FUNCTIONS Can easily switch from Continuous Pilot Arc Model, Non-Continuous Pilot Arc and Plasma Air Gouging (consumable set can be purchased separately). 2T/4T Function enabled. Post-flow control enabled. Expanded/punched metal cutting by using Continuous pilot arc model.CNC ENABLED Pre-installed 12-PIN CNC Interface with VHC (Voltage Height Controller) signal output. Non-HF Blowback Start, there is no HF interference on your CNC computer. Italy made Trafimet ERGOCUT S65 torch features a "BLOWBACK" design with a Euro-type central connector.
SETUP WITHIN 1 MIN The per-installed NPT 1/4" industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. Trafimet ERGOCUT S65 torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.
INPUT & OUTPUT Automatic Dual Voltage / Dual Frequency (110/120 220/240 V 50/60Hz). 20-60 A DC output, 4/5" ideal clean cut and 1 1/4" maximum severance cut under 220/240V. 20-30A DC output, 1/3" ideal clean cut and 1/2" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
PACKAGE INCLUDES Power supply, Trafimet ERGOCUT S65 blowback cutting torch, ground clamp, Pre-installed NPT 1/4" industry type D plug and Air filter regulator, consumables, Flow Meter, 12-PIN CNC Connector, 120V/240V Convertor, Instruction Manual, Hand-Held Shield, Wire Brush, etc.
Description
LOTOS Supreme CUT SeriesThe new, redesigned LOTOS Supreme CUT series is a non-high frequency start machine. The "blow-back" type start that is used is generally safe for use in CNC applications and is ideal for general use. Blow-back type start involves a rearward movement of the electrode within the torch head when forced by the air pressure. When air pressure is applied the movement of the electrode off its seated position against the inner surface of the circuit grounded nozzle creates a spark, energizing the plasma stream. With this machine's start type and pilot arc design, you are able to cut on any metal surface without having to contact to strike an arc which is ideal for cutting items like expanded metal or uneven surfaces. This CNC cutting machine has a wide range of uses which is suitable for cutting: stainless steel, alloy steel, mild steel, copper and other color metal materials.
There are several other key features on the Supreme Cut series:
With the reliable Blow-Back non-high frequency start, the LOTOS Supreme CUT60D is suitable for CNC application meaning there will be no interference on your CNC computer system.
Italy made Trafimet ERGOCUT S65 torch features a "BLOWBACK" design with a Euro-type Central connector. Offering improved consumable life with a patented "BACK STRIKING" design.
Plasma Air Gouging enabled.
2T/4T Function enabled.
Expanded/punched metal cutting by using continuous pilot arc model.
Post-flow control provides timing of post flow air which increases consumable life and cools the torch for an extended period of time if desired.
The pre-installed NPT 1/4" industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. Pre-installed 12-PIN CNC Interface.
2. P-80 Pilot Arc Air Plasma Cutter Non-touch Straigh Machine Torch For CNC plasma cutter (7M)
Feature
The P-80 High Frequency AIR Plasma Cutter Torch cutting 40MM thick plate under the current of 120A.Can be used in high frequency contact 60A-120A following up of air plasma arc cutting machine series products, high-frequency air plasma is suitable for various brands of 60A-120A following cutting machine.
The Brand of Machine would be Rilon, Riland, Jasic, Mitech, Chiry, UNT, Krypton, Longetivity, Berlan, Tonsense and so on
These torches for Plasma cutting machines such as CUT-50, CUT-100, CUT-120, CUT-80, CUT-60, LGK-60, LGK-80, LGK100, LGK-120, etc.
Description
1 Straight Torch
1 x Cup
1 x Electrode
1 x Tip
3. Lotos Supreme LTP5500D Plasma Cutter, 55 AMP Digital Control CNC Non-Touch Pilot ARC Plasma Metal Cutter, Non-HF Blowback Arc Start CNC Plasma Cutter, Metal Cutter
Feature
PORTABLE and POWERFUL: The LTP5500D can easily cut 3/5" (15 mm) metal with ultimate portability weighing only 15lbs; The LT5500D is an excellent choice for home DIY jobs and light duty small business projects.CNC ENABLED: Non-HF Blowback Start, there is no HF interference on your CNC computer. SETUP WITHIN 1 MINThe per-installed NPT 1/4" industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.
INPUT & OUTPUT Automatic Dual Voltage / Dual Frequency (110/120 220/240 V 50/60Hz). 20-55 A DC output, 3/5" ideal clean cut and 1" maximum severance cut under 220/240V. 20-35A DC output, 3/8" ideal clean cut and 1/2" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
PACKAGE INCLUDES Power supply, Nlowback Non-HF start cutting torch, Consumables, Ground clamp, Pre-installed NPT 1/4" industry type D plug and Air filter regulator.
SATISFACTION GUARANTEEDBuy with confidence, as we offer 30-days refund/replacement and 1 year warranty. FEEL FREE TO CONTACT USour customer Care team is always ready to help. Naturally, we hope you don't encounter any problems, but when they crop up, our customer support is there to help! we will provide the Best solution for you.
Description
About Lotos Technology
Headquartered in Sunnyvale, California, LOTOS Technology supplies quality welding and cutting tools to small businesses and Do-It-Yourself (DIY) buyers.
LOTOS No-HF Plasma Cutter
The new, redesigned LOTOS No-HF CUT series is a non-high frequency start machine. The "blow-back" type start that is used is generally safe for use in CNC applications and is ideal for general use. Blow-back type start involves a rearward movement of the electrode within the torch head when forced by the air pressure. When air pressure is applied the movement of the electrode off its seated position against the inner surface of the circuit grounded nozzle creates a spark, energizing the plasma stream. With this machine's start type and pilot arc design, you are able to cut on any metal surface without having to contact to strike an arc which is ideal for cutting items like expanded metal or uneven surfaces. This CNC cutting machine has a wide range of uses which is suitable for cutting: stainless steel, alloy steel, mild steel, copper and other color metal materials.
There are several other key features on the Supreme Cut series:
With the reliable Blow-Back non-high frequency start, the LOTOS Supreme CUT60D is suitable for CNC application meaning there will be no interference on your CNC computer system.
- The Non-HF Start pilot arc torch with a Euro-type Central connector offering improved consumable life with a patented "BACK STRIKING" design.
- 2T/4T Function enabled.
- Latest IGBT Inverter Technology
- The pre-installed NPT 1/4" industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor.
4. SUNCOO Cut-50 Plasma Cutter Electric DC Inverter Machine with Digital Display Dual Voltage 110/220V,3/4" Clean Cut
Feature
50 Amp Digital Inverter Plasma Cutter- handles cuts up to 3/4" ,simple operation and smooth cutting surface.Suitable for cutting stainless steel, copper, iron and aluminum metal etc.Outstanding cutting performance-Especially suitable for cutting carbon steel, stainless steel, aluminum and copper.
Multifunctional Use-The compact plasma cutting machine is suitable for a wide range of applications including sheet metal fabrication, light industrial use, site work, automotive, ducting work, repair and maintenance services.
Easy to Assemble-All assembly hardware is included. Clear and brief instruction makes it easier to put together and use. And no professional tools are needed.
Auto-voltage- automatically adapts to 110-220V input power,Rated input capacity (KVA): 4.8
Description
Item specifics:
- Style: Modern
- Type: Plasma Cutter
- Color: Yellow
- Material: Steel
- Product Size: 9.8*15.6*6.1 in
- Power Voltage: 110/220v
- Rated input capacity (KVA): 4.8
- Current Range (A): 20-32/20-50
- Rated output voltage (V): 96
- Duty cycle (%): 60
- Efficiency (%): 85
- Insulation class: F
- Protection Class: IP21
- Max Cutting Thickness (mm): 12
- Cod. (NO): 894004
Product description:
Plasma cutting is a process that cuts through electrically conductive materials by means of an accelerated jet of hot plasma. Typical materials cut with a plasma torch include steel, stainless steel, aluminum, brass and copper, although other conductive metals may be cut as well. It often uses in fabrication shops, automotive repair and restoration, industrial construction and salvage and scrapping operations. Due to the high speed and precision cuts combined with low cost, it is widespread use from large scale industrial CNC applications down to small hobbyist shops.
Features:
- Cutting Capacity increases 1.8 times higher in cutting speed comparing with flame cutter.
- Thick Metal plate can be cut easily and quickly.
- Suitable for cutting stainless steel, copper, iron and aluminum metal etc.
- Simple operation and smooth cutting surface.
Package Content:
- 1 x Plasma Cutter
- Manual
5. VIVOHOME DC Inverter Plasma Cutter Cutting Machine Dual Voltage 110V/220V CUT-50
Feature
Improved cutting ability, compared with the oxy-acetylene cutting, the cutting speed increased by 1.8 times50Hz frequency is inverted to high frequency (frequency is over 100KHz) by MOSFET
The step down voltage and rectification current, inverter power supply generates powerful DC welding currant through PWM technology
Thick steel plate cutting is very convenient , fast and economical. Max cutting thickness:1-12mm
Can be used widely, it is suitable for cutting stainless steel, alloy steel, mild steel, copper and other metal materials
6. B.W.P Metal Roller Guide Wheel Spacer Consumables Kit for P80 Air Plasma Cutting Cuter Torch
Feature
P80 Guide WheelFor your CUT-100 LGK-100 plasma cutter with P80 plasma cutting torches.
Current range from 80-100Amps.
Max Cutting thickness: 40MM
1pc P80 Spacer Guide Wheel
Description
1. P80 Guide Wheel
2. For your CUT-100 LGK-100 plasma cutter with P80 plasma cutting torches.
3. Current range from 80-100Amps.
4. Max Cutting thickness: 40MM
5. 1pc P80 Spacer Guide Wheel
7. 2017 PowerPlasma 50S 50amps PILOT ARC Plasma Cutter 110/220v
Feature
Redesigned new PowerPlasma 50S model with NEW upgraded IPT-60 torch50 Amps of professional cutting power
Blow-back start technology, Pilot Arc / 110/220v Dual Voltage
CNC port for light gauge CNC use / T2/T4 / TIP SAVER OPTION
Adjustable Post Flow timer of up to 60 seconds exends consumable and torch life
Description
Features & Benefits:* Dual Voltage 120/240 V for maximum portability
* Adjustable Post Flow timer of up to 60 seconds exends consumable and torch life
* Front Mounted air pressure regulator for easy adjustment
* Front Mounted air pressure gauge for easy monitoring of air pressure
* Euro style "Central" quick connect torch adapter
* The ergonomic and flexibleEverlast S-45 torch features blow back start
* Inexpensive consumables interchange with several different brands
* 60% duty cycle is fit for commercial use
* Exceptionally clean smooth cuts
* OverCurrent/Duty Cycle indicators and auto interrupt help protect the machine
* OK-to-cut indicator/feature indicates when air pressure is sufficient to make a cut, and automatically stops output if air pressure is too low or has become disconnected
* Can be used with 8500 watt clean power generators (less than 10% total harmonic distortion)
With the cutting power that the PowerPlasma 50 is capable of delivering coupled with the pilot arc feature, most people find it's the perfect solution to their metal cutting needs . With a recommended daily use cut capacity of up to 5/8" the unit takes care of materials found in small shops, home garages, and even in most fabrication facilities. Additionally, the PowerPlasma 50 can make a clean cut up to 3/4" with a total severance cut capacity of 7/8". The IGBT inverter design reduces size and weight to the point that the unit can be easily carried around with the shoulder strap so that you can always get to what you need to cut. This unit performs well at a fraction of the cost, when compared with similar class units in the market place. Add in the dual voltage 120V/240V capability of this unit, the PowerPlasma 50 is one of the most versatile 40-50 amp class plasma cutters on the market. Even on 120V, the 25 amp output is enough to clean cut up to 3/16". This allows you the confidence for the...
8. DALISHI Plasma Cutter 50Amp Non Touch Pilot Arc CNC Cutting Machine 1/2 Inch Clean Cut Dual Voltage 110/220V With Cutting Torch AG60 and Consumables For Cut50P
Feature
Intensive arc, high cutting speed, narrow and smooth kerf, continuous current regulation, little distortion for work-piece, safety and reliable for operation.Suit for cutting stainless steel,copper,iron and alumlnum metal ect.
Digital read out technology-allows Amperage precision.
When you working,the pilot arc can makes the metals in good condition.
Suit for DIY and family use.
Description
FREE ACCESSORIES INCLUDING
1 X air regulator.
1 X gas hose .
1 X earth clamp .
1 X plasma cutting WSD-60P torch.
3 X tips.
3 X electrodes.
3 X cups.
1 X spacer guide.
There will be no plug due to plug differences between countries.
9. DALISHI 60A Pilot Arc Plasma Cutter Non Touch IGBT Cutting Machine CNC 110 / 220V ICUT60P
Feature
This ICUT60P is IGBT cutter and have cnc cutting feature.Cutting thickness: iron Carbon steel Cast iron 18mm Stainless aluminum 13mm copper 10mm
Strong adaptability to electricity power grid, high ability of interference resistance, automatic voltage compensation, stable cutting current and steady arc.
IGBT machine is far superior and more stable than MOSFET machine. High duty cycle result in less power consumption.
Factory warranty:any question, feel free to contact us and we will reach you at the soonest.
Description
Application:
ICUT60P has IGBT inverter and precision constant current feedback control technology, soft switch, DC output. Wide working voltage range, strong adaptability to electricity power grid, high ability of interference resistance, automatic voltage compensation, stable cutting current and steady arc.
Applied to mechanical processing, electrical construction, chemical construction, rigid structure and family DIY.
Export to more than 15 countries, such as USA, Brazil, Chile, Australia, Denmark, Spain, Poland,Indonesia, Singapore, etc.
Parameters:
Model ICUT60P
Primary input voltage 220V
Welding Current 10~60Amps
Power Factor 0.93
Insulation Class F
Cutting Thickness 1~16mm
Duty Cycle 60%
Accessories:
1 x Ground clamp with cable.
1 x Plasma Cutting Torch(WSD60P) with cable
3 x Electrodes
3 x Tips
3 x Ceramic Shield Cups
1guide
1 x Regulator
Please note:there will be no plug due to plug differences between countries.
10. Lotos Technology LTP6000 60Amp Non-Touch Pilot Arc Plasma Cutter, Blue, 3/4" Inch Clean Cut
Feature
OUPUT: Current 20~60A Duty Cycle @ 40C (104F) 60PCT @60A 100PCT @40AINPUT: Voltages 200~240V, 1PH, 50/60Hz; Current 200~220V, 1PH, 40A
CUT THICKNESS: Maximum: 3/4" Inch; Ideal Cut 1" Inch
INCLUDE: Power Supply; Cutting Torch; Consumables; Ground Clamp; Air Filter and Regulator; Connections
SUITABLE: For stainless steel, alloy steel, mild steel, copper and aluminum.Robust Infineon (By Siemens) IGBT Power Drive Matrix
Recent Comments