Which are the best cpu fan hub available in 2018?
We spent many hours on research to finding cpu fan hub, reading product features, product specifications for this guide. For those of you who wish to the best cpu fan hub, you should not miss this article. cpu fan hub coming in a variety of types but also different price range. The following is the top 10 cpu fan hub by our suggestions:
1. SilverStone PWM Fan Hub System Cables, Black (CPF04)
Feature
1-to-8 PWM connectors2200F capacitor provides stable voltage
Support speed detection for accurately controlling fans
Description
CPF04 is designed for enthusiasts with need for controlling numerous system fans.It is capable of expanding one motherboard PWM fan header to support up to eight fans. Powered directly by SATA cable from the computer power supply and filtered through a built-in 2200F capacitor, the CPF04 can provide clean, stable voltage to any fan for optimal performance. Equipped with speed detection sensors for accurately controlling eight PWM fans simultaneously, it is an excellent solution for system fan expansion.2. PWM Fan Hub,Exwin PC CPU Cooling 4 PIN/3PIN Fan Power Cable Hub Splitter Adapter Sleeved PWM Case Fan Splitter for 12V Desktop Computer Cooler Case Fans 4 Way (15.8 Inch)
Feature
Exwin PWM fan splitter allows you connect 4 PWM devices on a single motherboardMultiple fan splitter, Supports all 12V CPU or case fans compatible with 4 pin or 3 pin connector
4 Way Splitter, one for 12V CPU fan and three hub for general case fans
A adhesive tape included to mount the hub on your computer case, the tape may not firmly attached on some textured surface
NOTE: DO NOT exceed 12V 2A total output. Please check your devices specification before installation
Description
Computer Fan Hub 4 Way Sleeved PWM Fan Splitter CablePackage list
1 pcs PWM fan plitter hu cable
1 Female 4-pin Connector + 4 Male 4-pin Connectors(one for 12V CPU and three for case fans)
3. Electop Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Fan Hub Molex Controller
Feature
Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans.In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
RED is expected to be a pass through for the CPU fan. So, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the "source" fan. You can connect to the CPU fan lead on the system board or the chassis fan lead. The ten fans will spin at the same speed, that designated by the system for that fan. If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%.
Description
Theoretically system can control the fan speed connecting with the red port.The motherboard can read the RPMs of the fan that's plugged into the red port.
The speed of the fan connected to the red fan port on this board is controlled by the computer's operating system and NOT manually controlled.
The other 9 black fan ports CAN NOT be adjusted in speed. Because one operating system can only control speed of one fan.(The red Port)
Operating system control is based on the system detects the temperature of the CPU and other heating devices, automatically adjust the CPU fan speed.
the CPU port (the red port) would be the only one that could get controlled by the operating system and then the remaining black ports would just copy the power level of what the red port is at.
Package Include:
1x HUB
1x PWM connector
4. NZXT Sentry 3 5.4-Inch Touch Screen Fan Controller Cooling (AC-SEN-3-B1)
Feature
Material: Steel, ABS Plastic, Capacitive Touchscreen, PCBConnector: 3-Pin & 4-Pin
Channel Quantity: 5 Channels
Channel Wattage: 15 Watts
Form Factor: Single Bay 5.25"
Connections: 1x Molex, 1x Temperature Sensor, 5x PWM Male Fan Connectors
Screen Type: Capacitive Touch
5.4''EXTRAORDINARILY LARGE SCREEN
15 WATTS PER CHANNEL: Control up to three high performance fans on each channel.
STAY SAFE: Integrated overvoltage, under voltage, and short protection
COMPATIBILITY: Connect and control any 3-Pin or 4-Pin PWM fan on the market.
Description
The Sentry 3 brings you the best of both worlds by combining 15 watts of power per channel with an extraordinarily intuitive UI, giving you complete control over your entire rig's cooling with the swipe of a finger. The newly introduced PowerSlide Bar gives you ultimate control over your fan channels, letting you adjust speed on the fly. Channel linking allows you to join any of the five fan channels together and control the link group simultaneously.5. DeepCool Fan HUB CPU Cooler Powers up to 4 Fans
Feature
Controls up to 4 PWM fan speedSupports fan with 3PIN/4PIN
Cable management
Easy to install
Description
DeepCool Fan Hub - CPU Cooler / Case / Chassis Cooling Fan Power Cable Splitter 1 to 4 Adapter - PWM Supported6. Electop Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Fan Hub SATA Controller
Feature
Designed for 12V 4 Pin FAN, support simultaneous starting of 10 channel 4 Pin fans, solving the problem of shortage of motherboard.Support PWM function fan automatic speed regulation.
PWM interface is connected to CPU FAN interface on motherboard by PWM cable. The red interface is the dedicated interface for CPU fan, these black interface are conventional PWM fan interface.
EVA double-sided adhesive can be used to fix the hub in the chassis.
Size: 75 X 48 mm
Description
Electop Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Fan Hub SATA ControllerNote: The red interface is the dedicated interface for CPU fan, these black interface are conventional PWM fan interfaces.
Package Include:
1x HUB
1x PWM connector
7. DEEPCOOL FH-10 Integrated Fan Hub, Powering up to 10 Fans (3-pin or 4-pin), Occupying only One 4-pin Motherboard Header (System Fan or CPU Fan)
Feature
Capable of connecting to 10 PC fans simultaneously for cooling the computer systemModular design that allows aesthetic cable organization
If PWM fans are connected with this fan hub, each port will have its own PWM function and fan speed can be adjusted at the same time (only the speed of Fan 1 can be identified by the system.) If non-PWM fans are connected, this fan hub CANNOT give them extra PWM function
Powered by a stable SATA connection to the system PSU for up to 10 fans
Velcro and screw mountings applicable for the tower interiors
8. Thermaltake Commander FP SATA Powered 10 Port 4-Pin PWM Fan Hub AC-023-AN1NAN-A1
Feature
Supports 10 (4-pin) Independent Fans :Capable of connecting 10 PWM fans, the Commander FP enables users to optimally expand cooling capability within the chassisDirect SATA Power Input: Powers up to 9 PWM fans simultaneously from PSU to prevent stray current when the fan hub is in use
Included Ties/Velcro for Easy Placement: 5 reusable beaded cable ties, 2 velcro tabs, and one PWM signal cable that let users keep the cables neat and tidy and hold the fan hub steadily in place
Blue LED Power Indicator
1 Year Warranty
Description
The new Thermaltake's PWM fan hub Commander FP is capable of powering up to 10 independent PWM fans which allows users to saturate the case with fans while maintaining superb cable management. Sporting a blue LED indicator light, the Commander FP ensures the inside of your case looks just as good as the outside, making it the best choice for cooling performance enthusiasts or users seeking no-fuss installation!.9. JBtek All Black Sleeved 4 Way PWM Splitter Hub for 12V Computer Fans
Feature
The JBtek 4 way fan hub allows you to connect up to 4 PWM devicesCompatible with all 12V CPU or case fans with 4 pin or 3 pin connector
Double adhesive tape for easy mounting to your computer case, extra long cable for easy installation
NOTE: please do not exceed 12V 2A total output
Package includes: 1 x JBtek 4 Way PWM Fan Hub
Description
Package includes: 1 x JBtek 4 Way PWM Fan Hub10. ZRM&E 4Pin 12V PWM Fan Hub Speed Controller SATA 1 to 10 Way PC Cooling Fan PCB Adapter CPU Cooler Power Splitter Socket With PWM Connection Cable
Feature
Type: SATA 1 to 10 Way 4-Pin 12V PWM Cooling Fan Splitter HubFunction: Support simultaneous starting of 10 channel 4PIN fans, solving the problem of shortage of motherboard.
Interface: 1pcs SATA power interface, 1pcs PWM interface for connecting to CPU FAN interface on motherboard, 1pcs red delicated CPU fan interface, 9pcs black conventional PWM fan interface.
Installation: EVA double-sided adhesive can be used to fix the hub in the chassis.
Package: 1 x SATA 1 To 10 Way Splitter Cooling Fan Hub PCB Adapter + 1 x 4-Pin PWM Connection Cable
Description
Feature:Type: SATA 1 to 10 way cooling fan splitter hub
Color: Black
Material: Plastic + Metal
Size: 75x48mm/2.951.89in (Approx.)
Power Supply Interface: SATA
Output Interface: 10 way fan 12V 4pin interface port, support simultaneous starting of 10 channel 4-Pin fans, solving the problem of shortage of motherboard. The orange interface is the dedicated interface for CPU fan, and the other black interfaces are conventional PWM fan interface.
PWM Interface: For connecting to CPU FAN interface, which support PWM function, on motherboard with connection cable.
Function: Support PWM function fan automatic speed regulation.
Installation: With EVA double-sided adhesive on the back, you can fix the hub in the chassis.
Application: Widely used for PC computer water cooling system.
Conditions to Achieve PWM Temperature Control:
1. The fan is a 4-pin PWM fan, which is very important. Some motherboard 4-pin interfaces are not a real PWM fan jack, they are adjusted by the voltage. Such motherboards can not make PWM control fans.
2. Connect the motherboard 4-pin fan interface, BIOS starts the PWM function.
Package Content:
1pcs SATA 1 to 10 way cooling fan splitter hub
1pcs 4-Pin PWM Cable
Recent Comments