Where to find discharge resistor?
When you looking for discharge resistor, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable discharge resistor is not an easy task. In this post, we show you how to find the right discharge resistor along with our top-rated reviews. Please check out our suggestions to find the best discharge resistor for you.
1. WINGONEER 2PCS Mini Discharge USB Load Resistor Current Tester with Switch 2A/1A Mobile Power Current Detection
Feature
Mini discharge with switch 2A/1A mobile power current detectionUSB load resistance, is mainly to do discharge test
Very convenient and easy to use
It's convenient to test mobile power supply
You can do the aging test of mobile power supply and USB power adapter
Description
WINGONEER trademark Reg.NO:012678447Description:
USB load resistance power resietor Portable source Aging resistance Measuring cuttent Discharge resistance
Note: When discharged, the resistance will be hot, the temterature was nearly 80~85 degrees. Please pay attention to the hot.
It's convenient to test mobile power supply , mobile phone charger, whether the output current USB power supply standards, as long as the resistance of the USB port to the top of it. And you can do the aging test of mobile power supply and USB power adapter. green LED lighting indicates that is 1A,Red LED Not bright is 2A.
Features:
Brand and high quality.
It's normal when welding resistance may occur heated white smoke or odor phenomenon.
products can freely be switched with a switch, very convenient and easy to use.
Switch and usb interface design.
Color: Green.
Rated Power: 5W-10W.
Resistance: 1A-2A.
Packing included:
2x WINGONEER USB load resistance
2. DZS Elec 2pcs USB Mini Battery Load Tester Power Bank Discharge Resistor 5V1A/2A Switchable Load Resistance Discharging Ageing Resistance Electronic Load Detector
Feature
There is a 1A/2A current button to switch 1A or 2A current discharging.Work voltage is 5V, power is 10W-20W, switching the button to change resistance and current.
Pay attention to the high temperature generated in the work process of load resistance, please don't touch to avoid scald and stay away from flammable items.
Working with indicator light, switch button marked current value, to indicate the current mode at present. Steady light means reaching up to standard output rating, off or flash means the power supply is less than rated output standard.
Adopting real 5Ohm winding resistance to make sure the testing results more accurate.
Description
Module Feature:Power: 10W-20W
Resistance: 5 Ohm -2.5 Ohm Swithcable
Work Voltage: 5V
Work Current: 1A/2A
Note:
Because there is large current passing through the winding resistance, when the load tester is working, it will generate very high temperature. Please do not touch the winding resistance during the usage or just finishing the usage, to avoid scald. And please keep the load tester away from combustible items.
Perhaps there will be little strange smell in the first use when resistance heating, and it will disappear after few times use. This is normal phenomenon. Please don't worry about this.
Package Include:
2pcs 1A/2A Load Tester
3. SMAKN Mini Discharge USB Load Resistor Current Tester 0.4A-2.1A adjustable constant current USB electronic load
Feature
Working voltage: DC 3.6V-6VDischarge current: 0.4A-2.1A continuous adjustable (the actual range slightly larger)
Current work error: no more than 3% + 5mA
Under continuous discharge power: 7.5 W (no fan) (under 5V 1.5 A current, more than the power is not easy to work long hours)
Description
*Operating voltage: DC3.6V-6V*Discharge current: 0.4A-2.1A continuously adjustable (actual range slightly larger)
*Current Operating error:no more than 3% + 5mA
*Continuous discharge power: 7.5 W (no fan) (under 5V 1.5 A current, more than the power is not easy to work long hours)
*Size: radiator portion size: 40mm * 30mm * 24mm
circuit board plug projecting portion length: 25mm
*Weight :(no fan) 25g
Product advantages:
*Discharge current stability does not vary with voltage fluctuations
*Adapt to a wide current range can be adjusted to a wide range of
*With overload indicator, higher than 4.5V will light;
4. Alloet New Industrial Grade Electronic Load Resistor USB Discharge Battery Tester 15W
Feature
Voltage: 3.7-13VAdjustable current: 0.15-3.00A
Power: 15W (continuous working)
Fan working temperature: 40c
Fan: Ball bearing fan(Long life ball-bearing fan; High velocity, low noise, powerful; support long time discharging and factory products burn-in test.
5. 15W RD Industrial Grade Electronic Load Resistor USB Interface Discharge Battery Test Meter Capacity
Feature
Technical Parameter:Voltage: 3.7-13V
Adjustable current: 0.15-3.00A
Power: 15W (continuous working)
Fan working temperature: 40c
Description
Technical Parameter:Voltage: 3.7-13V
Adjustable current: 0.15-3.00A
Power: 15W (continuous working)
Fan working temperature: 40c
Fan: Ball bearing fan
1 X Electronic Load resistor
6. Crossbreed EMP Proof Large Protective Bag, 19 1/2" x 22" by, ARK Protector Series The Resister -
Feature
Water, Dust, & Dirt Proof; Corrosion ResistantOffers One of the Highest EMP & Electrical Resistance Rating Available in a Protective Bag
Puncture Resistant to 30 Pounds with Nearly 60 Pounds of Tear Strength
Safe for Electronics, Documents, Firearms, & Other Valuable, & Critical Items
Over 20 Years of Military Use Protecting Multi-Million Dollar Guided Weapon Systems; Made in the USA!
Description
Made in the USA!Bag Dimensions: 19.5" x 22"
The Ark Resistor Bag by CrossBreed is made from the same material used to protect high value missile and guided weapon systems for the US Military. Previously available only to the military and now available exclusively through CrossBreed, this material has nearly twenty years of proven protection from moisture, corrosion, dust, dirt, electrical pulse, and static discharge. The Ark Resistor Bag offers superior electronics protection that significantly exceeds all military requirements for EMP and static discharge resistance including the stringent standards of MIL-PRF-81705. Furthermore, when heat sealed, the Resistor Bag is waterproof, dustproof, corrosion resistant, and resistant to 30 pounds of puncture pressure.
What is Mil-PRF-81705?
This specification establishes the requirements for heat-sealable, electrostatic discharge protective, flexible barrier materials used for the military packaging of microcircuits, sensitive semiconductor devices, sensitive resistors, and associated higher assemblies. In addition, the type I materials provide for water-vaporproof protection and attenuation of electromagnetic interference effects.
The exterior of the bag is a conductive shield which offers resistance against EMP while the inside is coated with a non-conductive layer which electrically isolates any inner contents from the outside world.
The concept of a Faraday cage is such that it (or a Faraday bag) will attenuate the voltage spike from a weaponized electromagnetic pulse (which is extremely short in duration, ~5 nanoseconds) while providing a level of protection for the contents inside.
Note that there is also a natural phenomenon which my emanate from our sun, called a CME (coronal mass ejection). If strong enough a CME could also produce damaging effects to electronic circuits here on earth. Similarly a Faraday cage may provide protection.
7. TOLOVI USB Mini Discharge Load Resistor 2A/1A with Switch 1A Green led, 2A Red led New Product
Feature
Package:SMDOperating Temperature:.
Supply Voltage:.
Type:Logic ICs
Dissipation Power:.
Description
start
end
Notice:The new tracking number for ChinaPost Ordinary Small Packet Plus can be traced only befor it arrive the airport of your country,please choose China Post Air Mail if you want a full tracking info.The same product will arrive in 15 to 60 days
:
www.17track.net/enMy product use high quality resistance, longer life!Features1. Using toggle switch, two-color work lights: 1A and 2A can be directly switched current discharge. When the switch 1A work, the green light. When the switch 2A work, the red light.2. Large area copper, increase the cooling holes: the back of the expansion of the copper area, increase the cooling hole. Enhanced cooling function.3. True 5 ohm winding resistance: The discharge resistance uses a customizable true 5 ohm winding resistance (higher cost), resulting in more accurate test results (closer to 2A and 1A).TutorialFunction switch:When your power supply maximum output is 1A, then switch to 1A file to test; when your power output is 2A or above, switch to 2A file for testing.Judgment criteria:Insert the USB output port of the detected USB power supply / mobile power supply, 1A work, the green light. When the switch 2A work, the red light.1. The work of the loader, winding resistance due to high current, will inevitably produce very, very high temperature, so in use, and just use a short time, So as not to be burned! Do not allow flammable materials to touch the tester to avoid fire! In short the use of the process must be highly vigilant!Package Include
1 x Discharge load resistor
8. Westsell RD 15W Industrial Grade Electronic Load Resistor USB Interface Discharge Battery Capacity Test Meter with Fan Adjustable Current
Description
RD 15W Industrial Grade Electronic Load Resistor USB Interface Discharge Battery Capacity Test Meter with Fan Adjustable Current9. HobbyStar iCharger Discharger Resistor Bank, 40A
Feature
The HobbyStar 40 Amp Discharge Resistor Bank is the perfect addition for your iCharger 4010/308/406, 4mm bullet plugs are a direct fit. 12AWG wire with a protective cover.Discharge Ratings: 1S - 40A, 2S - 40A
10. Golden Age SnufferStick High Voltage Discharge Stick
Feature
Safely discharge high voltage when working on ampsClip the SnufferStick to the chassis for ground, and then hold the tip to your filter caps to discharge dangerous high voltage present when you turn off your amp
We highly recommend using a meter to measure the voltage while you have the discharge stick in place
The SnufferStick will safely discharge the high voltage supply within three to five seconds - only remove the stick when the voltage is completely drained
Included are two 180K, 2-watt resistors in series with the nose probe and ground wire (360K total)
Description
Safely discharge high voltage when working on amps
Clip the SnufferStick to the chassis for ground, and then hold the tip to your filter caps to discharge dangerous high voltage present when you turn off your amp.
Included are two 180K, 2-watt resistors in series with the nose probe and ground wire (360K total). The SnufferStick will safely discharge the high voltage supply within three to five seconds. We highly recommend using a meter to measure the voltage while you have the discharge stick in place. Only remove the stick when the voltage is completely drained.
Don't work on an amp without a discharge stick!
Recent Comments