Top recommendation for ramps 1.4 case
Finding your suitable ramps 1.4 case is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best ramps 1.4 case including detail information and customer reviews. Let’s find out which is your favorite one.
![[Sintron] 3D Printer Controller RAMPS 1.4 Arduino Mega Pololu Shield for Reprap Prusa Mendel Arduino Mega2560](https://images-na.ssl-images-amazon.com/images/I/51PgdHqWdyL.jpg)
1. DreamSky Digital Alarm Clock Radio with FM Radio, Dual USB Ports for Charging, 3.5 mm Headphone Jack, Snooze, Adjustable Alarm Volume,1.4" Large LED Number Display, Sleep Timer
Feature
Simple Operate LED Clock Radio : 1.4" jumbo red LED digit display with 2 level dimmer for easy readability accros the room . Intuitive controls with remarkable function printed indicate a very easy set way even don't require instructions. Great for seniors and the elderly as well as sight-restricted person.Digital FM Radio : Easy to tune in FM radio channel with 0-15 volume level adjustable . Along with an earphone jack to listen to music in private and without disturbing others .
Dual USB Charging Ports And Main Powered : Charging your cellphone by dual USB ports with total 1.6A output . Plug in to power the clock radio with the included certified DC adapter . 2* AAA battery ( not included ) backup needed for storage the settings but not power on the unit in case of power outage.
Sleep Timer And Convenient DST Button : Fall asleep to the radio using the programmable sleep timer (10-90 minutes). 12 Hr system with PM indicator . Extra DST function will save your time without reset time when in spring and fall time . Press DST button till the DST indicator light up , the hour will go forward 1 hour , light off hour will back forward 1 hour , simple as that.
Loud Adjustable Alarms With Snooze : Wake up to buzzer or music via radios should your preference . Alarm sound will begin faintly then increases within 5 seconds to extremely loud . Alarm will sound 9 minutes without turning off or using snooze . 8 minutes interval snooz can be repeatted in one hour . 90 days money back guarantee, 365 days free replacement.
Description
Elegant Clock Radio With Large Red Led Digit Display5" high perspective screen with 1.4 " nice red digit display , time is easy to see across the room . Perfect for the elderly or the sight-restricted person.
With easy press DIMMER button , you can adjust the brightness of the display to high or low .
Convenient DST Function
Hassle to re-set time for daylight saving time ? This clock radio will definitely save your time . Just one DST button will be makes this things so easy .
1. Press DST button till the DST indicator light up , it will go forward 1 hour for spring time .
2. Press DST button till the DST indicator off , it will backward 1 hour for fall time .
Plug In Clock With Dual USB Ports For Charging
Plug in AC outlet ( 100-240 V ) with the included certified DC adapter to power on the clock. 2*AAA battery needed for storage the settings in case of power interrupt .
High speed Dual USB ports for quick charging your cellphone , tablet or other smart device with total 2.1 A output .
Digital FM Radio With 3.5 MM Earphone Jack
Easy tuning in FM radio with high quality reception .With the volume control, you are enable to adjust the radio volume from 0-15 level .
Generic 3.5 mm earphone jack compatible with most earphone in the market. Now you can enjoy the radio alone without disturb other family
Programmable Sleep Timer
Fall asleep to the radio using the programmable sleep timer. The sleep timer duration is 10-90 minutes.
Wake Up Sound Optional And Snooze
Wake up to buzzer or radio by preset . While select to wake up to radio, the alarm will always play back the last tuning station. Alarm will last 1 hour until turned off .
The repeat snooze function let you catch extra shuteye, 9 minute late the sound will wake you up so that you won't be late .
2. [Sintron] 3D Printer Controller RAMPS 1.4 Arduino Mega Pololu Shield for Reprap Prusa Mendel Arduino Mega2560
Feature
(1) 3 mosfets for heater / fan outputs and 3 thermistor circuits.(2) Pololu boards are on pin header sockets so they can be replaced easily or removed for use in future designs.
(3) All the Mosfets are hooked into PWM pins for versatility.
(4) Servo style connectors are used to connect to the endstops, motors, and leds. These connectors are gold plated, rated for 3A, very compact, and globally available.
(5) Fused at 5A for additional safety and component protection , Heated bed control with additional 11A fuse .
Description
OverviewThe RepRap Arduino-compatible MEGA Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
Version 1.4 uses surface mount capacitors and resistors to further cover edge issue cases.
Features
(1) It has provisions for the cartesian robot and extruder.
(2) Expandable to control other accessories.
(3) 3 mosfets for heater / fan outputs and 3 thermistor circuits.
(4) Fused at 5A for additional safety and component protection .
(5) Heated bed control with additional 11A fuse .
(6) Fits 5 Pololu stepper driver board .
(7) Pololu boards are on pin header sockets so they can be replaced easily or removed for use in future designs.
(8) I2C and SPI pins left available for future expansion.
(9) All the Mosfets are hooked into PWM pins for versatility.
(10) Servo style connectors are used to connect to the endstops, motors, and leds. These connectors are gold plated, rated for 3A, very compact, and globally available.
(11) USB type B receptacle .
(12) SD Card add on available .
(13) LEDs indicate when heater outputs on .
(14) Option to connect 2 motors to Z for Prusa Mendel .
3. Cell's world 3D Printer Fan Extender 2PWM 20V Fan Expansion Module for Reprap Ramps 1.4 RRD
Feature
Item Type:Fan ExpansionUnit Type:piece
Package Weight:0.03kg (0.07lb.)
Package Size:10cm x 10cm x 5cm (3.94in x 3.94in x 1.97in)
Description
Description:
100% brand new & high quality.
1. When you build or upgrade your printer with/to DUAL-EXTRUSION (2 extruder) including a heated bed, but found that all the output ports (D8,D9,D10) will be used.
2. The RRD-FAN-EXTENDER is exactly what you need in this case. It is a plug and play solution to mount the FAN for DUAL-EXTRUSION setups for RAMPS1.4.
3. But instead of adding only one additional output port the RRD-FAN-EXTENDER is equipped with 2 PWM controllabe channels(D6/D11).
4. The second channel can be used for another fan(e.g. to cool the stepper driver) or for adding light control (e.g. add dimmable LED light to your machine).
Features:
1. Max 20V.
2. 2 (PWM controllable) channels (D6/D11).
3. Max 0.5A per channel (enough for a really big fan).
4. Flexible output voltage (you can connect the RRD-FAN-EXTENDER to 12V,5V. in order to support The output voltage you need).
5. Each channel has a fly back diode.
6. Easy setup (plug and play).
7. Supported by Marlin firmware (choose "#define MOTHERBOARD 34").
8. Easy to adapt to other firmware (e.g. Sprinter: just change "#define FAN_PIN 6" in "pins.h").
Quentity:1Pc
1.Transition: 1cm=10mm=0.39inch
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
4.No retail package
Package includes:
1Pc x Fan Expansion Module
(other accessories demo in the picture are not included)
4. ZUOYA 1PCS RAMPS 1.4 3D Printer Control Panel Printer Control Reprap MendelPrusa
Feature
1PCS RAMPS 1.4 3D Printer Control Panel Printer Control Reprap MendelPrusaDescription
RAMPS 1.4 3D printer control panel printer Control Reprap MendelPrusaDescription: RepRap Mega Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Ard Mega with the powerful Ard MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Ard MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Ard expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. Version 1.4 uses surface mount capacitors and resistors to further cover edge issue cases. Package including: 1PCS Ramps 1.4
5. ILS. - Reprap Ramps1.4 RRD Extender Fan Card Extension for 3D Printer Reprap with 2 Channels
Description
Description: If you construisce or update printer / dual extrusion (2 extenders) which includes heating plate, all output ports (D8, D9, D10) will be occupied. In this case, there is the option to connect a fan controlled by firmware to RAMPS card directly. However, the Sprinter / Marlin firmware, there is already Marlin (option: BOARD = 34) that connect the fan output D4 RAMPS. But this solution requires a 'buffer / driver' for operation.- RRD-FAN-EXTENDER is exactly what you need in this case. a plug and play solution (colleague - uses) to connect the fan with RAMPS1.4 through double extension. However, instead only add an additional output port, PRD-EXTENDER-FAN is equipped with 2-channel controllable by PWM (D6 / D11). We must Marlin firmware v3 or later. If you use p old firmware, you need to flash back to scheda.2. Turn on, two fans connected to rotate turno.3. It can be connected depending on the image description. Click Here for more information
The package includes: 1 x Reprap Ramps1.4 RRD extender fan (fan - card not included)
6. ILS. - Micromake Makeboard Main Pro 3D Printer Support Heatbed Council Compatible with ramps 1.4
Description
feature: Makeboard Pro is specially designed by Micromake technical team to resolve problem that usually occurs on the open source control board ramps 1.4 3D printers.We fully consider about errors that customers usually do in the beginning, so that use different colors to distinguish different connector - use XH connector to prevent showers.
We give sufficient protection in the control program. Council adopts dual self-recovery fuse to prevent short circuit - 5-way high-resistance diode to prevent reverse so as not to damage the card, even if Sully power wire is inserted opposite.
Pin design is compatible with control board RAMPS 1.4 , you can download open source firmware or Repetier Marlin - so on for use directly. type default control board is such tab.
With 3-way temperature detection, 4-way MOS output, 5-way motor drive - support large heatbed power as well. What's p, support dual extruder! Meanwhile, it can support 5v, 12v-24v fan.
drive motor 5-way report all cables that supports connection to high engine power to make huge size 3D printer drivers.
1602,2004,12684 display support insert EXP1, EXP2 connector, meanwhile, with color touch screen AUX1 connector is available.
The size of this card is 10 * 10cm, using M3 screws 4 hole setting, the center hole is 5 mm away from the edge.
Note: The design
use auto onboard combined with fool-proof, has blue pin header on the left - black on the right in case overheating due to anti-plug.
If you use other control board or self board, please note the triangle arrow in the upper left is ENABLE definition - consequently plug.
It supports a maximum resolution 128 microstep - can be adjusted MS1, MS2, MS3 bridge in the center outlet edge of the unit. H stands for short-circuiting
7. ILS - Geeetech Reprap Ramps1.4 RRD Fan Extender For 3D Printer Reprap With 2 Channels
8. HESAI RAMPS 1.4 Controller Control Panel for Reprap Mendel Prusa 3D Printer Support Arduino Mega 2560 Devlepment Board
Feature
Fully assembled & tested, no soldering requiredDesigned to fit the entire electronics needed for a RepRap in one small package for low cost.
Modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion.
A number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
Version 1.4 uses surface mount capacitors and resistors to further cover edge issue cases.
Description
Description:
RepRap Mega Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
Version 1.4 uses surface mount capacitors and resistors to further cover edge issue cases.
It has Cartesian robots and regulations of the extruder .
Extended to control other accessories.
Heater / MOSFET outputs and three fan thermistor circuit.
Integration of additional security 5A and component protection
Control of additional heating bed 11A fuse
Suitable for 5 Pololu stepper driver board
Pololu board pin socket, so they can be easily replaced or removed for future designs .
I2C and SPI pins left for future expansion.
Hooked into all MOSFET PWM pin versatility.
Servo type connector is used to connect to the end stop , the motor and the light-emitting diodes. These connectors are gold-plated , rated current of 3A, very compact.
On the SD card to add - is now available from the Kliment - Sdramps
LED indicate when the heater output
Option 2 motors connected to Z Prusa Mendel
Package List:
1x Ramps 1.4 Controller
9. Toogoo For Reprap Ramps1.4 RRD Fan Extender,2 PWM controllable channels,3D printer,Mendel
Feature
If you build or upgrade your printer with/to DUAL-EXTRUSION (2 extruder) including a heated bed all the output ports (D8,D9,D10) will be used. In this case there is not option to connect a firmware controlled FAN to RAMPS board directly.However in Sprinter/Marlin firmware there is an option already (Marlin: BOARD=34) which redirects the FAN to RAMPS output D4. But this solution needs a "buffer/driver"in order to work.
The RRD-FAN-EXTENDER is exactly what you need in this case. It is a plug and play solution to mount the FAN for DUAL-EXTRUSION setups with RAMPS1.4.
But instead of adding only one additional output port the RRD-FAN-EXTENDER is equipped with 2 PWM controllabe channels(D6/D11). The second channel can be used for another fan (e.g. to cool the stepper driver) or for adding light control (e.g. add dimmable LED light to your machine).
Description
* TOOGOO is a registered trademark. ONLY Authorized ller of TOOGOO can ll under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration.TOOGOO(R) For Reprap Ramps1.4 RRD Fan Extender,2 PWM controllable channels,3D printer,Mendel
Features:
max 20V
2 (PWM controllable) channels (D6/D11)
max 0.5A per channel (enough for a really big fan)
flexible output voltage (you can connect the RRD-FAN-EXTENDER to 12V,5V,... in order to support the output voltage you need)
each channel has a fly back diode
easy tup (plug and play)
already supported by Marlin firmware (choo "#define MOTHERBOARD 34")
easy to adapapt to other firmware (e.g. Sprinter: just change "#define FAN_PIN 6" in "pins.h")
Package List
1 x RRD-FAN-EXTENDER
Only the above package content, other products are not included.
Note: Light shooting and different displays may cau the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
10. SODIAL(R) 1 set CCL Material RAMPS 1.4 Printer Kit for RepRap 3D Drucker
Feature
RAMPS stands for RepRap Arduino-compatible MEGA Pololu Shield.It has been designed so that all the electronic components required for your RepRap 3D printer can be combined on this shield.
Thus, with this shield, e.g. A control with five stepping motors, three temperature sensors, six limit switches, a heating bed, a fan and an extruder.
Description
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.SODIAL(R) 1 set CCL Material RAMPS 1.4 Printer Kit for RepRap 3D Drucker
Color: As shown
Material: CCL
Package content:
1x RepRap Arduino Mega Pololu Shield (RAMPS) 1.4
1x Mega 2560 Board with ATmega2560 and CH340G USB controller - Arduino compatible
5x A4988 Step motor driver
5x heat sink for A4988
1x 20x4 characters Dot-Matrix LC-Display with Controller
1x RAMPS adapter for the LCD
2x connection cable for the LCD
1x USB cable
1x jumper set
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Recent Comments