Top recommendation for betafpv transmitter
Finding your suitable betafpv transmitter is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best betafpv transmitter including detail information and customer reviews. Let’s find out which is your favorite one.
1. Beta65S BNF Micro Whoop Quadcopter Upgraded Integrate with OSD F4 SPI Frsky Receiver with Z02 Camera and 17500KV 7x16mm Motors
Feature
Upgrade with F4 FC brushed SPI Frsky receiver and Z02 FPV camera. The default configuration from factory is Frsky D16 mode (FRSKY_X). Built in Frsky receiver is compatible with Taranis, Taranis Plus, X9E, Horus X12S, XJT Modules. In Betaflight Configuration, it should be setted as FRSKY_D receiver (aka Frsky D8 mode) or FRSKY_X receiver (aka Frsky D16 mode) in SPI RX mode.This is a SPI Frsky receiver. Binding easier than before, no need to click the bind button when power on. Manual: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
F411 Processor can reach to 100MHz, much faster than the F3 Flight Controller with 72Mhz. Integrated with Frsky receiver only.
More punch on throttle with faster 17500KV 7x16mm motors and 3-blade propellers.
Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions
Description
BETAFPV Beta65S Tiny Whoop Quadcopter with F4 SPI Frsky Receiver OSD Smart Audio Z02 Camera 17500KV 7x16mm Motors for Tiny Whoop Racing3 improvements based on Beta65 drones.
Motors: 6x15mm -> 7x16mm brushed motors
Frsky Receiver:F3 FC -> F4 FC SPI Frsky OSD - The latest BETAFPV F4 brushed FC has upgraded firmware to Betaflight 3.4.1, SPI Frsky D16(Default Configuration) connection works in this F4 flight controller.
Cam: Z01 Cam -> Z02 Cam - This Z02 FPV Camera is customized for Micro FPV quadcopter like Tiny Whoop etc. Support the SmartAudio function and adjustable output power, has wide lens angle of 100 to 120 Degrees with 1/4 lens.
Binding Procedure
The binding procedure is reversed as usual. No need to click the bind button when power on.
Power on the board, either by connecting the battery or USB power. Then the green receiver LED start to flash.
The second step, click the bind button for 3s. Then the green receiver LED will be solid on. This means that the receiver is in bind mode and you could start to bind your radio transmitter.
For detailed procedure of binding, please check the here: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
Specification
Wheelbase: 65mm
Weight: 25g (without battery)
Flight Controller: F4 Brushed FC SPI Frsky with OSD-UK: https://www.amazon.co.uk/dp/B07DMDZ1LH
Firmware Version: Betaflight MATEKF411RX 3.4.0
Motor: 7x16mm Coreless Brush Motor, 17500KV
Receiver: Frsky D16 potocol
Camera: Z02 Camera -https://www.amazon.co.uk/dp/B07FNRLFGZ
Batterry: 260mAh Lipo HV battery with PowerWhoop connector
Flight time: 3 minutes 30sseconds
Package Included:
1 * Beta65S BNF Frsky
1 * 260mAh 1S Lipo HV Battery
2. Betafpv TX02 Digital Radio Transmitter 2.4G 8CH Frsky White for Frsky D8 Protocol DIY RC Drone FPV Multicopter Like Beta75 Frsky Version etc
Feature
The white TX02 Radio Transmitter is for Frsky D8 protocol.Easy to bind: press the "Rudder trim" button (H) and pull the power switch (I) to the right at the same time.
Excellent radio transmitter choice for noob, fit with Frsky receiver, like Beta75 or Beta75S BNF etc.
The battery of the TX02 Radio Transmitter is 3.7V Removable Lipo Battery.
Model Type: Multi-rotor. Wide frequency range from 2403MHz-2447MHz.
Description
Betafpv TX02 Digital Radio Transmitter 2.4G 8CH Frsky White for Frsky D8 Protocol DIY RC Drone FPV Multicopter
Delicate design of this TX02 radio transmitter enables the tx fits comfortably in your hands.
How to bind a BETAFPV TX02(User Request)
https://www.youtube.com/watch?v=pmpeg8NjQTY&feature=youtu.be
Specification:
Frequency Range: 2403MHz - 2447MHz
2.4G System: CC2500 & CC2592
Channel: 8
System: Frsky D8 Protocol
Model Type: Multi-rotor
Battery: 3.7V Removeable Lipo Battery
Weight: 240g
Package:
1 * TX02 Digital Radio Transmitter
3. BETAFPV H02 FPV AIO Camera 5.8G 40CH 25mW Transmitter Integrate OSD Super Mini Cam Compatible with Blade Inductrix etc
Feature
FPV Micro AIO Camera Integrate OSD VTX for tiny whoop Blade Inductrix etc. All in one vtx + camera + antenna, support OSD plug and play, ready to fly.Supporting touch switch select channel Frequency group,Supporting NTSC/PAL switch, Support vertical inverted image switch.
The weight of H02 FPV AIO Camera is only 3.6g, with small size of 47 * 14.8 * 12.5 mm.
The cable to connect the OSD is available for this camera. Recommend FC: https://www.amazon.com/dp/B074GXKKZ7
8 LED display channel and 6 LEDS display frequency group information, 1 LED display PAL/NTSC and FLIP information.
Description
BETAFPV H02 FPV AIO Camera 5.8G 40CH 25mW Transmitter Integrate OSD Super Mini CamSpecification:
Output power:25mW
Voltage:2.9-5.5v
Size:47 * 14.8 * 12.5 mm
Weight:3.30g
Antenna:Dipole Whip Antenna
Power consumption:200~215MA 5V DC
Frequency:5.8G 5 bands 40 channels with Raceband: 5362~5945MHz
Field of view:120
Operating Temperature:-10~+60
Ambient temperature:25
Channel SEL:Touch Switch
Modulation type:FM
Transmit power:131dBm
Frequency control:PLL
All harmonic:Max -50dBm
Frequency Stability:100KHz (Typ.)
Frequency precision:200KHz (Typ.)
Channel Carrier error:1dB
Antenna Port:50
SENSOR:PAL:720X540/NTSC:640X480 1/4"
LENS ANGEL:H:120/V:100
Base-band interface:(P1.27*2)
Profile dimension:14.5mm*12.2mm+14.5mm*12mm
Package:
1 * FPV Micro AIO Camera Integrate OSD VTX
1 * Plastic Canopy
4. BETAFPV FPV FC Lite Brushed Flight Controller Compatible with Sliverware Firmware
Feature
The world's first FC board compatible with Silverware firmware. This must be the most simple and affordable method to try whoop FPV racing hobby.Support level mode and acro mode. Also it has the ability to change settings for custom builds, or to adapt to personal preferences by stick gestures.
Designed to work with current Tiny Whoop or Blade Inductrix frames.Built in Bayang protocol native receiver, compatible with almost radio transmitter with deviation firmware or deviation compatible transmitter module. Deviation Compatible : https://www.deviationtx.com/
The flight controller board comes pre-flashed with Silverware firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector.
Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions
Description
Specification:CPU: STM32F030
Six-Axis: MPU6050
ESC: All FETs are rated at 6.3A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors.
Size: 26mm x 26mm, fully compatible with the Inductrix quad frame and mounting pattern
Firmware version: Silverware firmware
Receiver: Bayang protocol
Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector
Weight: 2.5g
Silverware:
Silverware is a firmware for some micro quadcopters, which support level mode and acro mode. So you could use this on whoop FPV racing. Also it has the ability to change settings for custom builds, or to adapt to personal preferences.
By default, Silverware use stick sequences, which also called gestures, to change modes, tune PIDs, calibrate accelerometer or save settings.
Eg, with Frsky QX7 radio transmitter, change the FC's mode between level and acro. Just move the right stick as show below.
Supported radio transmitter:
Currently the built-in receiver is compatible with Bayang protocol. Here is a listing of radio transmitter that could be compatible with this FC board.
BETAFPV TX01 radio transmitter: https://betafpv.com/products/betafpv-t01-radio-transmitter-bayang-protocol
Radio transmitter of toy drone like JJRC H67, Eachine E011 etc, that using the Bayang protocol
Jumper T8SG radio transmitter
MTX-9D multiprotocol module (Suit for Frsky Tanaris QX7 X9D X9D Plus X12S, Flysky TH9X, Turnigy 9XR/9XR PRO):https://betafpv.com/collections/rx-tx/products/multiprotocol-mtx90-module
Other 4in1 multiprotocol module that support the Bayang protocol
Package:
1 * BETAFPV Lite brushed flight controller V1.0 ( 55mm PH-JST 2.0 power cable soldered)
4 * M1.2x4mm screws (Fit for stock Inductrix frame)
4 * M1.4x5mm screws (Fit for Beta75 etc 75mm frame)
4 * Anti-vibration ruber dampers
5. BETAFPV BetaCube F4 FC Frsky Rx Z02 AIO 5.8G VTX Camera Smart Audio for Tiny Whoop Quads Like Beta75S BNF
Feature
BETAFPV F4 FC brushed with SPI Frsky receiver and Z02 FPV camera 480TVL CMOS OSD Switchable 25mW 200mW Transmitter Smart Audio.Binding Procedure--Easier than usual, No need to click the bind button when power on: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
F411 Processor can reach to 100MHz, much faster than the F3 Flight Controller with 72Mhz. Integrated with Frsky receiver only.
The Z02 FPV Camera has wide lens angle of 100 to 120 Degrees with 1/4 lens. Support touch switch select channel Frequency group. Output power of the transmitter is adjustable 25mW to 200mW with the voltage of 2.9V- 5.5V.
Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions
Description
BETAFPV BetaCube F4 FC Frsky Rx Z02 AIO 5.8G VTX Camera Smart Audio for Tiny Whoop Quads Like Beta75S BNF
The camera of the Betacube (Frsky version) is updated to Z02 camera while the other version of Betacube's cameras are still BETAFPV Z01 camera.
Specification:
This is the upgraded version of Betacube. A customed plastic holder is made in this newest version. Soldering is done ahead of time you can use it when received. F4 FC+OSD+ Frsky Rx flight controller with AIO 5.8g newest Z02 VTX camera.
CPU: STM32F411CEU6
Six-Axis: MPU6000
ESC: All FETs are rated at 30A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors.
Size: 26mm x 26mm,fully compatible with the Inductrix quad frame and mounting pattern
Firmware version: Betaflight MATEKF411RX 3.4.0
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Receiver: SPI Frsky D8 protocol (AKA FRSKY_D on Betaflight Configuration)
Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector
Output power: 0mW, 25mW and 200mW (Adjustable)
Supply Voltage: 2.9-5.5V
Size : 27*17*14 mm
Weight: 4.7g
Antenna: Omnidirectional ANT
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
TV System: NTSC
Field of view: 100-120 degrees with 1/4 lens.
Packagge Included:
1 * BETAFPV F4 brushed flight controller (all connectors soldered)
1 * BETAFPV Z02 AIO camera VTX (all connectors soldered)
1 * Plastic Z02 Holder
4 * M1.24mm screws (fit for stock Inductrix frame)
4 * M1.45mm screws (fit for Beta75 etc 75mm frame)
4 * Amti-vibration ruber dampers
6. BETAFPV Beta75S BNF Tiny Whoop Quadcopter F4 FC Frsky Receiver Z02 Camera Upgraded with OSD and Smart Audio for 8X20 Motor
Feature
The default configuration from factory is Frsky D16 mode (FRSKY_X). Built in Frsky receiver is compatible with Taranis, Taranis Plus, X9E, Horus X12S, XJT Modules. In Betaflight Configuration, it should be setted as FRSKY_D receiver (aka Frsky D8 mode) or FRSKY_X receiver (aka Frsky D16 mode) in SPI RX mode.This is a SPI Frsky receiver. Binding easier than before, no need to click the bind button when power on. Manual: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
More punch on throttle with 8x20mm motors and 3-blade 40mm propellers. The same hole pattern with Tiny Whoop flight controller.
The Beta75S has 2 improvement based on Beta75 drones: 1.Motors: 7x20mm -> 8x20mm brushed motors. 2.Battery: 260mAh -> 550mAh Lipo HV battery.
Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions
Description
BETAFPV Beta75S Tiny Whoop Quadcopter F4 FC Frsky Receiver Z02 Camera Upgraded with OSD and Smart Audio for 8X20 Motor4 improvement based on Beta75 drones.
Motors: 7x20mm -> 8x20mm brushed motors
Battery: 260mAh -> 550mAh Lipo HV battery
Frsky Receiver:F3 FC -> F4 FC SPI Frsky OSD - The latest BETAFPV F4 brushed FC has upgraded firmware to Betaflight 3.4.1, SPI Frsky D16(Default Configuration) connection works in this F4 flight controller.
Cam: Z01 Cam -> Z02 Cam - This Z02 FPV Camera is customized for Micro FPV quadcopter like Tiny Whoop etc. Support the SmartAudio function and adjustable output power, has wide lens angle of 100 to 120 Degrees with 1/4 lens.
Binding Procedure
The binding procedure is reversed as usual. No need to click the bind button when power on.
Power on the board, either by connecting the battery or USB power. Then the green receiver LED start to flash.
The second step, click the bind button for 3s. Then the green receiver LED will be solid on. This means that the receiver is in bind mode and you could start to bind your radio transmitter.
For detailed procedure of binding, please check the here: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
Specification
Frame: 65mm
Weight: 25g (without battery)
Flight Controller: F4 Brushed FC SPI Frsky with OSD-: https://www.amazon.com/dp/B07DMDZ1LH
Firmware Version: Betaflight MATEKF411RX 3.4.0
Motor: 8x20mm coreless brushed motor, 14000KV
Receiver: Frsky D16 potocol
Camera: Z02 Camera -https://www.amazon.co.uk/dp/B07FNRLFGZ
Batterry: 550mAh Lipo HV battery with PowerWhoop connector
Flight time: 5 minutes
Package Included:
1 * Beta75S BNF Frsky
1 * 550mAh 1S Lipo HV Battery
7. BETAFPV Beta75 BNF Tiny Whoop Quadcopter F4 FC Frsky Receiver Z02 Camera Upgraded with OSD and Smart Audio for 7X20 Motor
Feature
Upgrade with F4 FC brushed SPI Frsky receiver and Z02 FPV camera. The default configuration from factory is Frsky D16 mode (FRSKY_X). Built in Frsky receiver is compatible with Taranis, Taranis Plus, X9E, Horus X12S, XJT Modules. In Betaflight Configuration, it should be setted as FRSKY_D receiver (aka Frsky D8 mode) or FRSKY_X receiver (aka Frsky D16 mode) in SPI RX mode.This is a SPI Frsky receiver. Binding easier than before, no need to click the bind button when power on. Manual: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
The same hole pattern with Tiny Whoop flight controller. More punch on throttle with 7x20mm motors and 3-blade 40mm propellers.
The struts between the motor mounts and ducts are fragile and break easily. So these upgraded frames stiffen the struts considerably. The struts have a flat cross section which creates more bonding area with the duct.
Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions
Description
BETAFPV Beta75 Tiny Whoop Quadcopter F4 FC Frsky Receiver Z02 Camera with OSD Smart Audio 7X20 Motor for Tiny Whoop Racing2 Improvements
Frsky Receiver:F3 FC -> F4 FC SPI Frsky OSD - The latest BETAFPV F4 brushed FC has upgraded firmware to Betaflight 3.4.1, SPI Frsky D16(Default Configuration) connection works in this F4 flight controller.
Cam: Z01 Cam -> Z02 Cam - This Z02 FPV Camera is customized for Micro FPV quadcopter like Tiny Whoop etc. Support the SmartAudio function and adjustable output power, has wide lens angle of 100 to 120 Degrees with 1/4 lens.
Binding Procedure
The binding procedure is reversed as usual. No need to click the bind button when power on.
Power on the board, either by connecting the battery or USB power. Then the green receiver LED start to flash.
The second step, click the bind button for 3s. Then the green receiver LED will be solid on. This means that the receiver is in bind mode and you could start to bind your radio transmitter.
For detailed procedure of binding, please check the here: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
Specification
Wheelbase: 75mm
Weight: 38g (without battery)
Flight Controller: F4 Brushed FC SPI Frsky with OSD-UK:www.amazon.co.uk/dp/B07DMDZ1LH
Firmware Version: Betaflight MATEKF411RX 3.4.0
Motor: 7x20mm Coreless Brushed Motor, 17500KV-www.amazon.co.uk/dp/B071VT6XHV
Receiver: Frsky D16 potocol
Camera: Z02 Camera -www.amazon.co.uk/dp/B07FNRLFGZ
Batterry: 260mAh Lipo HV battery with PowerWhoop connector -www.amazon.co.uk/dp/B07121V7MB/
Flight time: 3 minutes 30 seconds
Package Included:
1 * Beta75 BNF SPI Frsky OSD
1 * 260mAh 1S Lipo HV Battery
8. BETAFPV F3 Brushed Flight Controller DSMX Receiver Integrated with OSD
Feature
The world's first compatible BetaFlight OSD, DSMX Rx, BetaFlight firmware, born for acro F3 flight controller for the Micro Whoop or Blade Inductrix quadcopter.Fully programmable through Betaflight, using the onboard USB port, tune all the parameters, PID's, and rates to your perfect settings. Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions
The flight controller board comes pre-flashed with Betaflight firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector.
This Flight controller is a 1 time binding procedure for Spektrum. You don't have to bind every time when changing the battery.
This native DSMX receiver is NOT compatible with Spektrum DXe radio transmitter and OrangeRX RF module. For some Spektrum radio transmitter like DX6i/DX6e etc, the DSMX receiver may have a horrible range with your radio transmitter, please change the mode to DSM2 (DSMX in default). This issue is figured out by Micro Motor Warehouse.
Description
BETAFPV F3 Brushed Flight Controller Integrated with OSD and DSMX ReceiverSpecifications:
CPU: STM32F303CCT6
Six-Axis: MPU6000
ESC: All FETs are rated at 6.3A maximum
Size: 26mm x 26mm,fully compatible with the Inductrix quad frame and mounting pattern
Firmware version:Betaflight BETAFLIGHTF3
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Receiver: DSMX potocol (SBUS)
Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector
Weight: 3.2g
Note: This native DSMX receiver is NOT compatible with Spektrum DXe radio transmitter and OrangeRX RF module.
Package:
1 * F3 OSD brushed flight controller with DSMX receiver ( 55mm PH-JST 2.0 power cable soldered)
4 * M1.2x4mm screws (Fit for stock Inductrix frame)
4 * M1.4x5mm screws (Fit for Beta75 etc 75mm frame)
4 * Anti-vibration ruber dampers
1 * 55mm PH-JST 1.25 power cable pigtail
9. BETAFPV F4 FC Brushed Flight Controller with SPI Frsky Receiver Betaflight OSD Smart Audio for Tiny Whoop Micro Racing Drone
Feature
The default configuration from factory is Frsky D16 mode (FRSKY_X). Built in Frsky receiver is compatible with Taranis, Taranis Plus, X9E, Horus X12S, XJT Modules. In Betaflight Configuration, it should be setted as FRSKY_D receiver (aka Frsky D8 mode) or FRSKY_X receiver (aka Frsky D16 mode) in SPI RX mode.This is a SPI Frsky receiver. Binding easier than before, no need to click the bind button when power on. Manual: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
The flight controller board comes pre-flashed with Betaflight firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector. Designed to work with current Tiny Whoop or Blade Inductrix setups
F411 Processor can reach to 100MHz, much faster than the F3 Flight Controller with 72Mhz. Integrated with Frsky receiver only. Upgraded to 30A Lower Resistance MOSFET, Firmware version: betaflight_matekf411rx_3.4.0. Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode). Support Smart Audio.
Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions
Description
BETAFPV F4 Brushed Flight Controller Integrated with OSD and Frsky Receiver for Tiny Whoop Drone.
BETAFPV F4 brushed FC board bring a new era in FPV whoop technology. STM32F411 100MHz high performance MCU, 30A lower resistance MOSFETs, SPI Frsky Rx, Build-in Betaflight OSD and polar reversed protection. All of these is backed by the same reliability and warranty of all BETAFPV FC boards.
Binding Procedure--Easier than usual. No need to click the bind button when power on.
a.Power on the board, connecting the battery or USB power. Then the green receiver LED start to flash.
b.Press the bind button for 3s. Then the green receiver LED will be solid on. It means the receiver is in bind mode and you could start to bind your radio transmitter.
Checking here: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
Specifications:
CPU: STM32F411CEU6
Six-Axis: MPU6000
ESC: All FETs are rated at 30A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors.
Size: 26mm x 26mm,fully compatible with the Inductrix quad frame and mounting pattern
Firmware version: Betaflight MATEKF411RX 3.4.0
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Receiver: SPI Frsky D8 protocol (AKA FRSKY_D on Betaflight Configuration)
Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector
Weight: 3.7g
Here is a using video shared by Shutterbug:
https://www.youtube.com/watch?v=M5p2kJGLscU
Package:
1 * F4 OSD brushed flight controller (55mm PH-JST 2.0 power cable soldered)
4 * M1.2x4mm screws (Fit for stock Inductrix frame)
4 * M1.4x5mm screws (Fit for Beta75 etc 75mm)
4 * Anti-vibration ruber dampers
10. BETAFPV Beta65S Lite BNF Micro Whoop Quadcopter Silverware Firmware Lite Brushed Flight Controller with 7X16mm 17500KV Brushed Motor
Feature
Supported radio transmitterBETAFPV TX01 radio transmitter; Jumper T8SG radio transmitter; Radio transmitter of toy drone like JJRC H67, Eachine E011 etc which using the Bayang protocol. If not sure whether your radio transmitter could support this FC board, please email us ( [email protected]) for help.As same as the Beta65S, more punch on throttle wth faster 716 17500KV motors and 3-blade props. BETAFPV Z01 aio 25mW vtx camera with 48 channels in total.
Built in Bayang protocol native receiver, compatible with almost radio transmitter with deviation firmware or deviration compatible transmitter module.
Support level mode and acro mode. Also it has the ability to change setting for custom builds, or to adapt to personal preferences by stick gestures.
Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions
Description
BETAFPV 65S Lite Micro Whoop Quadcopter Silverware Firmware with Lite Brushed Flight Controller
The Beta65S Lite is a new version with BETAFPV Lite brushed flight controller. Powered by silverware, much simple and much affordable. It is ready to fly and the Silverware software does not require switch setting like Betaflight does.
Specification:
Wheelbase: 65mm
Weight: 25g (without battery)
Flight Controller: BETAFPV Lite Brushed Flight Controller
https://www.amazon.com/dp/B07BBN1S62
Motor: 7X16mm 17500KV Brushed Motor
http://www.amazon.com/dp/B074MWWQHD
Receiver: Bayang protocol
Camera and 5.8G Tx AIO 520TVL 1/4 Inch Camera 25mW 40CH
Power connector: JST-PH 2.0 connector, AKA PowerWhoop connector
Battery: 3.7V 260mah Lipo battery
Flight time: 3 mins
Supported radio transmitter
BETAFPV TX01 radio transmitter
Jumper T8SG radio transmitter
Radio transmitter of toy drone like JJRC H67, Eachine E011 etc which using the Bayang protocol.
Note: If you have a Frsky Tanaris QX7/X9D radio transmitter and want to try this FC board, just plug in a MTX90 multiprotocol module and done.
Compatible multiprotocol module:
MTX-9D multiprotocol module (Suit for Frsky Tanaris QX7 X9D X9D Plus X12S, Flysky TH9X, Turnigy 9XR/9XR PRO)
Other 4in1 multiprotocol module that support the Bayang protocol
Package Included
1 * Beta65S Lite Mico FPV Quad
Recent Comments