Top 9 recommendation drawer slides and drawers for 2019
When you looking for drawer slides and drawers, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable drawer slides and drawers is not an easy task. In this post, we show you how to find the right drawer slides and drawers along with our top-rated reviews. Please check out our suggestions to find the best drawer slides and drawers for you.
1. Drawer Slide, Full Extension, 36 in., Heavy Duty, 500 lb. Capacity, Zinc
Feature
3320 Drawer Slide 36" bulk w/o screws Pregalv.Up to 500 lb. Load Capacity
3/4" Required Each Side For Installlation
Full extension
Industrial Applications
Description
Telescoping precision full extension slides for high loads, up to 500 lb. capacity, with cushioned in and out stops. Chromated steel. Runner and ball race dorm a single non-detachable unit. Smooth action and high side stability through precision slide. Ball spacers made of noise-absorbing plastic with hardened steel balls. PRICE IS PER PAIR. Screws not included. 3/4" Installation Width - 3" Height.2. 10 Pack Promark Full Extension Drawer Slide 22" 100lb Load Rating
Feature
10 pairs of slides per case22" Full Extension
Description
Features: Full Extension non-handed Positive Stop for fully extended drawers Hold-in design to prevent bounce back 32mm hole pattern with breating tabs Open access design for easy cabinet mounting Cushioned feature for pick-up noise reduction Steel ball bearing movement 100 lb. BIFMA tested load rating Face frame mounting hole Lever disconnect Application: Medium duty box drawer applications. This product has various applications in kitchens, office, store fixture, institutional and residential casework. Mounting: Side Mount Movement: Full extension with telescopic movement Side Clearance: 1/2" (12.7mm) + 1/16" Height: 1.80" (45.7mm) Load Rated: 100lbs (45kg) BIFMA load rated3. Friho 5 Pair of 16 Inch Hardware Ball Bearing Side Mount Drawer Slides, Full Extension, Available in 12'',14'',16'',18'',20'' Lengths
Feature
5 pair,16 inch,Mounting screws included. Attention: the mounting brackets are not included.Made from high-grade cold rolled steel that is electrom zinc plated.
Steel ball-bearing action that offer less noise at closing and opening
Lever disconnect for easy drawer removal
Side mounted, non handed design, positive stop
Description
5 pair,16 inch,Mounting screws included screws included.Made from high-grade cold rolled steel that is electrom zinc plated.
Steel ball-bearing action that offer less noise at closing and opening
Lever disconnect for easy drawer removal
Side mounted, non handed design, positive stop
4. Kreg Tool Company KHI-SLIDE Drawer Slide Jig
Feature
Install Drawer Slides the Fast, Easy Way for Drawers That Fit Perfectly Every Time and Slide SmoothlyAccurate slide positioning with built-in indexing tabs
Repeatable results without measuring and marking
Versatile for use in cabinets, cases, and more
Reversible to mount slides to cabinet and drawer box
Description
Kreg Tool Company KHI-SLIDE Drawer Slide Jig5. Promark 22 Inch 100 LB Capacity Full Extension Soft / Self Close Ball Bearing Side Mount Drawer Slides - 10 Pair Pack
Feature
Mounting: Side Mount : Clearance: 1/2 inchMaterial: Cold Rolled Steel
Capacity: 100 lbs.
Designed for frameless and face frame applications.
Description
Sold in 10 Pair Packs. Slides have a lever disconnect to separate. Rear Mounting Brackets are sold separately if needed.6. Drawer Slide, Full Extension, 60 in, Heavy Duty, 500 lb. Capacity, Zinc
Feature
3320 Drawer Slide 60" w/o screws Pregalv.Up to 500 lb. Load Capacity
3/4" Required Each Side For Installlation
Full extension
Description
The Hettich KA3320 60" drawer slides are a heavy duty, telescoping, precision, full extension drawer slides for high loads, up to 500 lb. capacity, with cushioned in and out stops. Chromated steel. The runner and ball race form a single non-detachable unit. Smooth action and high side stability through precision slide. Ball spacers made of noise-absorbing plastic with hardened steel balls.3/4" Installation Width - 3" Height. Tested Weight Capacity: 220 lbs. @ 10,000 Cycles - 143 lbs. @ 75,000 Cycles. Cabinet member requires #10 Flat head countersunk screw. Drawer member requires #10 pan head screw. Screw length will vary depending on application. Use all screw holes to acheive full load rating.
PRICE IS PER PAIR. Screws not included.Manufactured by Hettich America, in Buford, GA, USA. Features & Specifications ofHettich, 03320-060-44, 60" Drawer Slides, Heavy Duty, Full Extension. Drawer slides are measured by closed length.
7. Drawer Slide, Full Extension, 48 in, Heavy Duty, 500 lb. Capacity, Zinc
Feature
Hettich 3320 Drawer Slide 48" bulk w/o screws pre-galvanizedUp to 500 lb. Load Capacity
3/4" Required on each side for installation
Full extension
Sold as a pair
Description
The Hettich KA3320 48" drawer slides are a heavy duty, telescoping, precision, full extension drawer slides for high loads, up to 500 lb. capacity, with cushioned in and out stops. Chromated steel. The runner and ball race form a single non-detachable unit. Smooth action and high side stability through precision slide. Ball spacers made of noise-absorbing plastic with hardened steel balls.;3/4" Installation Width - 3" Height. Tested Weight Capacity: 280 lbs. @ 10,000 Cycles - 183 lbs. @ 75,000 Cycles. Cabinet member requires #10 Flat head countersunk screw. Drawer member requires #10 pan head screw. Screw length will vary depending on application. Use all screw holes to achieve full load rating. PRICE IS PER PAIR. Screws not included Manufactured by Hettich America, in Buford, GA, USA.Features & Specifications of Hettich, 03320-048-44, 48" Drawer Slides, Heavy Duty, Full Extension8. Probrico 100 LB Capacity Full Extension Soft/Self Close Ball Bearing Side Mount Drawer Slides 22 Inch 5 Pair
Feature
Nickel Plated-Steel Finish.22" Closed Length Full Extension Ball Bearing Soft Close Drawer Slides/Gliders.5 Pairs Package for 5 Drawers,mounting screws are included. Great slides, no mater for renovating your new kitchen/bathroom cabinet or a new DIY woodworking.
Ball Bearing and Solf Close.Give the drawer a push, it will close itself smoothly and slently.45mm wide and 100lb loading capacity.
Total thickness of the slides is 12.7mm,You need 1/2in (12.7mm) clearance on both sides of the drawer to install these.
The slides are for frameless cabinets. If you have face frames on your cabinets, then you need a face frame kit.Please order brackets on the listing.
Description
Full Extension, Ball Bearing Soft Close Drawer Slides
The slides are for frameless cabinets. If you have face frames on your cabinets, then you need a face frame kit.Please order brackets on the listing.
The total thickness of the slides is 12.7mm,You need 1/2in (12.7mm) clearance on both sides of the drawer to install these.
These are Soft Close, just give the drawer a push, it will close itself smoothly.
Please measure the distance from the front edge of the cabinet to the inside face of the cabinet back and then subtract 1".You will get the slides length you need.
Probrico markets products in home hardware: pulls and knobs,drawer slides,door hinge,concealed hinge,door lock.... You could find what you need and more than you need in Probrico store.Probrico offers hardware of a variety of designs,quality guaranteed and affordable
9. Drawer Slide, Full Extension, 28 in., Heavy Duty, 500 lb. Capacity, Zinc
Feature
3320 Drawer Slide 28" bulk w/o screws Pregalv.Up to 500 lb. Load Capacity
3/4" Required Each Side For Installlation
Full extension
Description
The Hettich 03320-028-44, 28" drawer slides are a telescoping precision full extension drawer slidedesigned for high loads, up to 500 lb. capacity, with cushioned in and out stops. The zinc plated steel runner and ball race form a single non-detachable unit. Smooth action and high side stability through precision slide. Ball spacers made of noise-absorbing plastic with hardened steel balls.
3/4" Installation Width - 3" Height. Tested Weight Capacity 380 lbs. @ 10,000 Cycles - 274 lbs. @ 75,000 Cycles. Cabinet member requires #10 Flat head countersunk screw. Drawer member requires #10 pan head screw. Screw length will vary depending on application. Use all screw holes to acheive full load rating.
PRICE IS PER PAIR. Screws not included.
Manufactured by Hettich America, in Buford, GA, USA.
Recent Comments