Top 9 recommendation arduino gsm shield 2
When you looking for arduino gsm shield 2, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable arduino gsm shield 2 is not an easy task. In this post, we show you how to find the right arduino gsm shield 2 along with our top-rated reviews. Please check out our suggestions to find the best arduino gsm shield 2 for you.
1. Arduino GSM Shield 2 Integrated Antenna Microcontroller
Feature
It gives you the ability to add a cellular connection to your project. Text or call your actuator system for complete control, or have your system text or call you. Requires an active sim cardRequires an active sim card
Weight: 0.02
Description
It comes equipped with an audio jack as well as the new M10 firmware. It adds a cellular connection to your unit, giving you the ability to text or call your system for full control. You can even have it text or call you. This requires an active sim card.2. SainSmart Small GSM GPRS SIM900 for Arduino UNO, Mega
Feature
Can work with Arduino Uno; Only work for 2G networkSainSmart is well known and provides high quality electronics product
Embedded TCP/UDP stack - allows you to upload data to a web server
Quad-Band 850/900/1800/1900 MHz - would work on GSM networks in all countries across the world
Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal)
Description
Overview:The GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones. The GPRS Shield provides you a way to communicate using the GSM cell phone network. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard.
Features:
Quad-Band 850/900/1800/1900 MHz - would work on GSM networks in all countries across the world.
GPRS multi-slot class 10/8
GPRS mobile station class B
Compliant to GSM phase 2/2+
Class 4 (2 W @ 850 / 900 MHz)
Class 1 (1 W @ 1800 / 1900MHz)
Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands.
Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).
Embedded TCP/UDP stack - allows you to upload data to a web server.
RTC supported.
Selectable serial port.
Specification:
5 pins
Low power consumption - 1.5mA(sleep mode)
Industrial Temperature Range - -40C to +85 C
Size:8.5x5.7x2cm(approx)
Pack List:
1x SIM900 GPRS/GSM Board Quad-Band Module Kit
Download:
https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-012-106/EN.zip
https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-012-106/SIM900_A_+Module+Series+Debug+_unfinished_.pdf
3. Geeetech SIMCOM SIM900 Quad-band GSM GPRS Shield Development Board for Arduino/Iduino
Feature
The GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones.The GPRS Shield provides you a way to communicate using the GSM cell phone network.
The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands).
The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard.
Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world.
Description
The GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones. The GPRS Shield provides you a way to communicate using the GSM cell phone network. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard.Features
Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world.
GPRS multi-slot class 10/8
GPRS mobile station class B
Compliant to GSM phase 2/2+
Class 4 (2 W @ 850 / 900 MHz)
Class 1 (1 W @ 1800 / 1900MHz)
Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands.
Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).
Embedded TCP/UDP stack - allows you to upload data to a web server.
RTC supported.
Selectable serial port.
Speaker and Headphone jacks.
Low power consumption - 1.5mA(sleep mode).
Industrial Temperature Range - -40C to +85 C.
Please note:
If you meet a SIM card error "+CPIN: SIM not inserted". This may be due to the fact that not all network providers are GSM supported. The best carriers to be with are O2, Vodafone, T-Mobile and even Meteor within the UK and Ireland.
Package list
1 x GPRS/GSM SIM900 Shield board
1x antenna
4. Wireless Quad-band GSM/GPRS/GPS Shield Arduino Based on SIM808 Onboard CP2102 MIC29302 Phone talk speaker Module @XYGStudy
Feature
GSM/GPRS/GPS Shield (B) is an Arduino shield based on the Quad-band GSM/GPRS/GPS module SIM808.Arduino connectivity, compatible with UNO, Leonardo, NUCLEO, XNUCLEO
Onboard USB TO UART converter CP2102 for UART debugging
5 x LEDs for indicating the module working status
Onboard voltage level converter, supports both 3.3V and 5V systems
Description
Features
Arduino connectivity, compatible with UNO, Leonardo, NUCLEO, XNUCLEO
Onboard USB TO UART converter CP2102 for UART debugging
5 x LEDs for indicating the module working status
Onboard voltage level converter, supports both 3.3V and 5V systems
SIM card slot for 1.8V/3V SIM card
Baudrate auto detection (1200bps ~115200bps)
Bluetooth 3.0 supports data transferring through Bluetooth
RTC with power supply interface
Firmware upgradable via USB
Control via AT commands (3GPP TS 27.007,27.005, and SIMCOM enhanced AT Commands)
Supports SIM application toolkit: GSM 11.14 Release 99
Operating voltage: 6 ~ 12V
Operation temperature: -40 C ~ +85 C
Storage temperature: -45 C ~ +90 C
Package Contains
GSM/GPRS/GPS Shield (B) x 1
GSM Antenna 1
GPS External Antenna (B) 1
Bluetooth Antenna 1
9V power adapter 1
USB type A plug to micro plug cable x 1
For more resources you may need, pls contact me via Amazon message, i will send you then.
5. Makerfocus A7 GSM GPRS GPS Module 3 in 1 Module Quad Band GSM/GPRS IPEX Antenna DC 5-9V Support Voice Short Message for Arduino STM32 51 Microcontroller MCU
Feature
Detailed connection info has been provided as the picture shown. Download the code from drive:google.com/open?id=0ByLlBkJVmxooZmM2UjAyWmdlbW8. Or you can email us to get the programming code after you buy it. How to email us? Plz click "MakerFocus" and "Ask a question".TinyGPS ++ library: http: //arduiniana.org/libraries/tinyg. http: //www.donationalerts.ru/r/arduin.
YouTube link to teach you how to use: https://www.youtube.com/watch?v=Wd1pijcGM-4; https://www.makerfabs.com/desfile/files/A6A7A6CA20_AT_Commends.pdf
IPEX interface active antenna; Two-stage amplification, high gain, strong signal. Support voice SMS GPRS, support GPS positioning. Insert the SIM card and Arduino board, you can send voice and short message to other SIM cards. User can browse webpage via GPRS after connecting to the LCD and get the GPS info of the module . Support Quad Band: 850MHz / 900MHz / 1800MHz / 1900MHZ With 1pcs of 3m GPS antenna and 1pcs of 2m GSM/GPRS antenna which support more stronger and stable signal .
User can browse webpage via GPRS after connecting to the LCD and get the GPS info of the module.
Description
A7 GSM GPRS GPS Module 3 in 1 Module Quad Band GSM/GPRS IPEX Antenna DC 5-9V Support Voice Short Message for Arduino STM32 51 Microcontroller MCUDescription:
This 3 in 1 small module with various functions that sending voice and short message, browsing webpages and collecting GPS.
Features:
IPEX interface active antenna; Two-stage amplification, high gain, strong signal.
Support voice SMS GPRS, support GPS positioning.
Insert the SIM card and Arduino board, you can send voice and short message to other SIM cards.
User can browse webpage via GPRS after connecting to the LCD and get the GPS info of the module .
Support Quad Band: 850MHz / 900MHz / 1800MHz / 1900MHZ
With 1pcs of 3m GPS antenna and 1pcs of 2m GSM/GPRS antenna which support more stronger and stable signal .
Detailed connection info has been provided as the picture shown. Download the code from drive:google.com/open?id=0ByLlBkJVmxooZmM2UjAyWmdlbW8.
Package Including
1 * A7 GSM GPRS GPS Module
1 * IPEX GPS antenna
1 * IPEX GSM antenna
6. SIMCOM SIM900 Quad-band GSM GPRS Shield Development Board for Arduino
Feature
The GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones.The GPRS Shield provides you a way to communicate using the GSM cell phone network.
The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands).
The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard.
Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world.
Description
Description:The GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones. The GPRS Shield provides you a way to communicate using the GSM cell phone network. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard.
Feature:
1. Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world.
2. GPRS multi-slot class 10/8 .
3. GPRS mobile station class B.
4. Compliant to GSM phase 2/2+ .
5. Class 4 (2 W (AT) 850 / 900 MHz) .
6. Class 1 (1 W (AT) 1800 / 1900MHz) .
7. Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands.
8. Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).
9. Embedded TCP/UDP stack - allows you to upload data to a web server.
10. RTC supported.
11. Selectable serial port.
12. Speaker and Headphone jacks.
13. Low power consumption -1.5mA(sleep mode) .
14. Industrial Temperature Range - -40C to +85 C
7. WHDTS A7 GSM GPRS GPS Module 3 in 1 Module Quad Band IPEX Antenna DC 5-9V Support Voice Short Message for Arduino STM32 51 Microcontroller MCU
Feature
With 1pcs of 3m GPS antenna and 1pcs of 2m GSM/GPRS antenna which support more stronger and stable signalSupport Quad Band: 850MHz / 900MHz / 1800MHz / 1900MHZ
Insert the SIM card and Arduino board, you can send voice and short message to other SIM cards
User can browse webpage via GPRS after connecting to the LCD and get the GPS info of the module
We'll give you a full refund or replacement in case you're not satisfied with the item.Kindly remind that you'll get more information by downloading the code from drive.google.com/open?id=0ByLlBkJVmxooZmM2UjAyWmdlbW8
Description
This 3 in 1 small module with various functions that sending voice and short message, browsing webpages and collecting GPS.
Support SIM network type: GSM(2G)/TD-SCDMA(3G)/WCDMA(3G)/TD-LTE(4G)/FDD-LTE(4G)not support CDMA1X(2G)/EVDO(3G)
Specification:
- Size:2.36" * 1.57"
- Support Voice and Short Message
- Package: 1 * A7 Module; 1 * 3m GPS Antenna; 1 * 2m GSM/GPRS Antenna
Connection with Arduino
A7 Module ARDUINO UNO
GND ------> GND
U_TXD ----> 0
U_RXD ----> 1
Download the material from drive.google.com/open?id=0ByLlBkJVmxooZmM2UjAyWmdlbW8
8. Balance world Inc SIM900 Quad-band GSM/GPRS Shield for Arduino UNO/MEGA/Leonardo
Feature
Based on SIMCom's SIM900 ModuleQuad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world.
Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands.
Embedded TCP/UDP stack - allows you to upload data to a web server.
12 GPIOs, 2 PWMs and an ADC (all 2.8 volt logic) - to augment your Arduino.
Description
The GPRS/GSM Shield provides you a way to use the GSM cell phone network to receive data from a remote location. The shield allows you to achieve this via any of the three methods: Short Message Service Audio GPRS Service The GPRS Shield is compatible with all boards which have the same form factor (and pinout) as a standard Arduino Board. The GPRS Shield is configured and controlled via its UART using simple AT commands. Based on the SIM900 module from SIMCOM, the GPRS Shield is like a cell phone. Besides the communications features, the GPRS Shield has 12 GPIOs, 2 PWMs and an ADC. Because SIM900 peak current more than 2A. This shield must work with a external DC9V power supply. Features Based on SIMCom's SIM900 Module Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal). Embedded TCP/UDP stack - allows you to upload data to a web server. Speaker and Headphone jacks - so that you can send DTMF signals or play recording like an answering machine. SIM Card holder and GSM Antenna - present onboard. 12 GPIOs, 2 PWMs and an ADC (all 2.8 volt logic) - to augment your Arduino. Low power consumption - 1.5mA(sleep mode) Industrial Temperature Range - -40C to +85 C Shipping List GPRS/GSM Shield x1 Antenna x19. Quad-band GPRS/GSM Shield (GSM Module Included)
Recent Comments