Top 9 best router insert plate kit 2019
Finding the best router insert plate kit suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
1. Rockler Convertible Benchtop Router Table with Compact and Mid-Size Insert Plate Kits
Description
The folding base on our Convertible Benchtop Router Table can be quickly reconfigured for benchtop use, wall-mounted use, or collapsed entirely for storage or transport. In addition, the unique router plate lets you quickly remove the router for freehand use, then dock it again for table usethe compact size of the plate makes it light and nimble in freehand applications. Compact and portable, yet full-featured, the table is ideal for small shops and jobsite use. Triangulate the base and mount it to the wall of your shop or to stud walls on the jobsite. Use it on your benchtop or on the tailgate of your truck, then collapse it and tuck it under the bench or into the truck cab. Features: Four modes in one table: benchtop, wall-mount, freehand routing and storage/transport Base converts quickly from freestanding to wall-mountedquick-release pins lock the legs in place In wall-mount mode, the router can be removed and the top folded flat against the wall when not needed Large non-slip feet clip into the base framing for rigidity in the various configurations Pull out the router with plate for freehand use; dock it in the table for table use Keyed mounting holes are 16'' on center for easy wall-mounting 3/4'' miter track accepts most standard miter gauges Accessory slot in fence accepts featherboards and stops Tall ergonomic fence knobs for fast fence adjustments without skinning your knuckles Will my router fit? The Rockler Convertible Router Table will accept most compact and mid-sized routers. It will NOT accept plunge routers or large routers like the 3-1/4HP Porter-Cable. It will also NOT accept the Porter-Cable PCE6430 Laminate Trim Router, due to its unique base design.2. Rockler Convertible Benchtop Router Table with Insert Plate Kit for Mid-Size Routers
Description
The folding base on our Convertible Benchtop Router Table can be quickly reconfigured for benchtop use, wall-mounted use, or collapsed entirely for storage or transport. In addition, the unique router plate lets you quickly remove the router for freehand use, then dock it again for table usethe compact size of the plate makes it light and nimble in freehand applications. Compact and portable, yet full-featured, the table is ideal for small shops and jobsite use. Triangulate the base and mount it to the wall of your shop or to stud walls on the jobsite. Use it on your benchtop or on the tailgate of your truck, then collapse it and tuck it under the bench or into the truck cab. Features: Four modes in one table: benchtop, wall-mount, freehand routing and storage/transport Base converts quickly from freestanding to wall-mountedquick-release pins lock the legs in place In wall-mount mode, the router can be removed and the top folded flat against the wall when not needed Large non-slip feet clip into the base framing for rigidity in the various configurations Pull out the router with plate for freehand use; dock it in the table for table use Keyed mounting holes are 16'' on center for easy wall-mounting 3/4'' miter track accepts most standard miter gauges Accessory slot in fence accepts featherboards and stops Tall ergonomic fence knobs for fast fence adjustments without skinning your knuckles Will my router fit? With the appropriate Insert Plate Kit, the Rockler Convertible Router Table will accept most compact and mid-sized routers. It will NOT accept plunge routers or large routers like the 3-1/4HP Porter-Cable. It will also NOT accept the Porter-Cable PCE6430 Laminate Trim Router, due to its unique base design.3. Rockler Convertible Benchtop Router Table with Insert Plate Kit for Compact Routers
Description
The folding base on our Convertible Benchtop Router Table can be quickly reconfigured for benchtop use, wall-mounted use, or collapsed entirely for storage or transport. In addition, the unique router plate lets you quickly remove the router for freehand use, then dock it again for table usethe compact size of the plate makes it light and nimble in freehand applications. Compact and portable, yet full-featured, the table is ideal for small shops and jobsite use. Triangulate the base and mount it to the wall of your shop or to stud walls on the jobsite. Use it on your benchtop or on the tailgate of your truck, then collapse it and tuck it under the bench or into the truck cab. Features: Four modes in one table: benchtop, wall-mount, freehand routing and storage/transport Base converts quickly from freestanding to wall-mountedquick-release pins lock the legs in place In wall-mount mode, the router can be removed and the top folded flat against the wall when not needed Large non-slip feet clip into the base framing for rigidity in the various configurations Pull out the router with plate for freehand use; dock it in the table for table use Keyed mounting holes are 16'' on center for easy wall-mounting 3/4'' miter track accepts most standard miter gauges Accessory slot in fence accepts featherboards and stops Tall ergonomic fence knobs for fast fence adjustments without skinning your knuckles Will my router fit? With the appropriate Insert Plate Kit, the Rockler Convertible Router Table will accept most compact and mid-sized routers. It will NOT accept plunge routers or large routers like the 3-1/4HP Porter-Cable. It will also NOT accept the Porter-Cable PCE6430 Laminate Trim Router, due to its unique base design.4. DCT Universal Router Table Saw Insert Base Plate Kit, 3-7/8, 2-5/8, 1-1/4 Inches Cutter & Porter-Cable Template Guide
Feature
BUILD A TABLE-MOUNTED ROUTER: The DCT Universal Router Table Saw Insert Base Plate Kit, 3-7/8, 2-5/8, 1-1/4" Inches - Cutter & Porter-Cable Template Guide lets you build your own table-mounted router safely so you can easily lift the router out of the table to change bits and safely operate; Gives you a mobile machined surfaceFITS MOST CUTTERS: 3/8-inch thick (1cm) phenolic router plate supports any router with removable baseplate; 3 snap out bit ring openings 3-7/8 inches (black) for large raised panel cutters, 2-5/8 inches (yellow) for medium to large cutters, 1-1/4 inches (red) for small cutters and Porter-Cable template guides; Steel starting guide pin allows routing curved work
EASY TO INSTALL: 9-inch x 12-inch (22.9cm x 30.5cm) plate with pre-drilled table mounting holes; Includes magnets and adjusting screws for securing and leveling the plate; 2 removable concentric rings allow for easy alignment when installing your router and give three different bit openings 3-7/8, 2-5/8, 1-1/4-inch (9.8cm x 6.7cm x 3.2cm); Underside is marked for centering the router prior to drilling
BUILT TO LAST: Constructed from durable phenolic plastic to securely hold any router without flexing or warping when storing your router on (not inside) the table; Plastic material makes it easy to drill holes for a custom router fit
CONTENTS: Package includes everything you need to mount your router to a table; (1) router plate, (1) guide pin, (4) magnetic holders, (1) Allen wrench hex key, and (4) screws; Router required, not included
Description
Build your own table-mounted router and easily lift the router out of the table with the DCT Universal Router Table Saw Insert Base Plate Kit, 3-7/8, 2-5/8, 1-1/4" Inches - Cutter & Porter-Cable Template Guide. This router plate supports any router with a removable baseplate and gives you a mobile surface. It includes pre-drilled table mounting holes and magnets and adjusting screws for securing and leveling the plate. The removable rings allow for easy alignment when installing your router and offer three sizes. The underside is marked for centering the router prior to drilling, and the phenolic plastic material makes it easy to drill holes for a custom router fit. It will securely hold any router without flexing or warping when storing your router on top of the table. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.5. MLCS 9338 All-In-one Router Plate Kit
Feature
Everything You Need to Mount Your Router to a Table!Strong, durable phenolic plastic will hold any router
3 bit opening sizes
Easy installation
Magnetic plate hold-down
Description
3/8" thick phenolic router plate supports any router. 2 removable rings give three different bit openings: (3-7/8", 2-5/8", 1-3/16"). Note: 1-3/16" opening is designed to hold Porter Cable (R) style guide bushings. The steel starting guide pin allows routing curved work. The plate is approximately 9" x 12" with pre-drilled table mounting holes. Includes magnets and adjusting screws for securing and leveling the plate. Also includes concentric rings on bottom of plate for easy alignment when installing your router.6. KREG Molded Router Table Insert Plate Blank, for All Routers
Feature
38"-thick compression-molded phenolic plate provides a flat plate surface that won't sag9-14" x 11-34" size accommodates large routers easily
Alignment marks on undrilled version provide easy router mounting
Level-Loc reducing rings provide three bit opening sizes of 1", 1-316" and 2-58"
Includes removable brass starting pin, Level-Loc wrench and detailed instructions
Description
This Kreg Table Insert Plate Blank for Routers is made from compression molded phenolic material so it won't sag even under the weight of a heavy router. Designed to use Level-Loc Reducing Rings that install in seconds and lock in place flush every time. They make setup changes simple by allowing you to quickly swap inserts rings for different bit sizes. A blank version comes without predrilled router-mounting holes, and features alignment marks on the underside that make it easy to center and mount any router.7. Milue Aluminum Router Table Insert Plate Trimmer Engraving Machine Woodworking Bench
Feature
Item Name: Router Table Insert Plate Material: Aluminum Alloy Size: app.300x235x9.5mm/11.81x9.25x0.37in Color: Silver,as the picture shown Quantity: 1 SetMulti-functional insert plate with rings, suitable for make your own router table for high precision woodworking processing.
Include DIY router lift kit to add height adjustment function for your plunge router (need drilling hole in router base by yourself).
Made by durable aluminum alloy for long life use. Convenient center-hole bushing used to align the router so it is centered in the bit hole.
It is easy to operate, save effort and labor, and easy to manipulate and expand the use of the trimming machine at the same time.
Description
100% brand new and high quality
Features:
Multi-functional insert plate with rings, suitable for make your own router table for high precision woodworking processing.
Include DIY router lift kit to add height adjustment function for your plunge router (need drilling hole in router base by yourself).
Made by durable aluminum alloy for long life use.
Convenient center-hole bushing used to align the router so it is centered in the bit hole.
It is easy to operate, save effort and labor, and easy to manipulate and expand the use of the trimming machine at the same time.
Specification:
Item Name: Router Table Insert Plate
Material: Aluminum Alloy
Size: app.300x235x9.5mm/11.81x9.25x0.37in
Color: Silver,as the picture shown
Quantity: 1 Set
Note: 1.Please allow 0-3mm error due to manual measurement. pls make sure you do not mind before you bid.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes(without retail package):
1 x Router Table Insert Plate
2 x Insert Ring
1 x T-wrench
1 x Pack of Screwdrivers
1 x Height Adjusting Kit
8. Router Table Insert Plate, 9.3''x4.7''x 0.3'' Aluminum Router Table Insert Plate with 4 Rings and Screws for Woodworking Benches
Feature
Aluminium Alloy MaterialOur Woodworking Table Insert Plate made of aluminium alloy, it is durable in use and not easy to rustWoodworking Accessories IncludedA set of woodworking bench tools includes 1 router table insert plate, 4 pieces router insert rings and some fixing screws
Easy-to-useConvenient center-hole bushing used to align the router so it is centered in the bit hole. It is easy to use and make the work be well done
Perfet PerformanceWoodworking accessories trimming plate multi-function floor board. Simple step-by-step instructions make accurately drilling and mounting any router easy
Application: Suitable for 62 * 70mm Installing Hole Distance Woodworking Router, such as for M372, 3709/3703MT370, M1P-FF-6/02-6/03-6/04-6, R3-6, wu619, etc
Description
Description:Our Router Table Insert Plate is made of aluminium alloy, durable in use and not easy to rust. Convenient center-hole bushing used to align the router so it is centered in the bit hole. It is easy to use and make the work be well done.
Specification:
Condition: 100% Brand new and high quality
Material: Aluminium alloy plate, plastic rings
Color: As picture shown
Size: Approx. 235mm * 120mm * 8mm/9.3 * 4.7 * 0.3in. Installing Hole Distance: 62 * 70mm / 2.44 * 2.75in
Weight: Approx. 577g
Package Included:
1 * Router Table Insert Plate
4 * Router Insert Rings (in which 1 piece of ring is in the plate)
1 * Pack of Fixing Screws
9. Zerodis 9.3''x4.7''x 0.3'' Aluminum Router Table Insert Plate with 4 Rings and Screws for Woodworking Benches
Feature
MaterialMade by aluminium alloy, it is durable in use and not easy to rust.FeatureConvenient center-hole bushing used to align the router so it is centered in the bit hole.
Easy to UseWoodworking accessories trimming plate multi-function floor board. Simple step-by-step instructions make accurately drilling and mounting any router easy
Woodworking Accessories IncludedA set of woodworking bench tools includes 1 router table insert plate, 4 pieces router insert rings and some fixing screws
Warranty1 year warranty, 30 days money back, 7x24 hours email support.
Description
Specifications:Condition: 100% Brand new and high quality
Material: Aluminium alloy plate, plastic rings
Color: As picture shown
Size: Approx. 235mm * 120mm * 8mm/9.3 * 4.7 * 0.3in
Installing Hole Distance: 62 * 70mm / 2.44 * 2.75in
Weight: Approx. 577g
Application: Suitable for 62 * 70mm Installing Hole Distance Woodworking Router, such as for M372, 3709/3703MT370, M1P-FF-6/02-6/03-6/04-6, R3-6, wu619, etc
Package Included:
1 * Router Table Insert Plate
4 * Router Insert Rings (in which 1 piece of ring is in the plate)
1 * Pack of Fixing Screws
Note:
Please check and compare the item sizes and installing hole distance with your router before placing an order.
Recent Comments