Top 9 best interconnected kidde for 2018
Finding the best interconnected kidde suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
1. Kidde KN-COSM-IBA Hardwire Combination Smoke/Carbon Monoxide Alarm with Battery Backup and Voice Warning, Interconnectable
Feature
Smart Interconnect-Interconnects up to 24 Kidde devices (of which 18 can be initiating), Battery Backup (2-AA batteries included)-Provides protection during power outages.Front Loading Battery Door-Replace the backup batteries without disconnecting from mounting bracketHumidity range:10%-95% relative humidity, non-condensing.Battery Lockout System-The battery door will not close unless the batteries are properly installed, Alarm Tamper Resist-Helps deter from tampering and theft, Adjustable Mounting Bracket-Makes installation fast and easy. Works with existing smoke and combination smoke and CO mounting brackets.
Peak Level Memory-Announces "CARBON MONOXIDE PREVIOUSLY DETECTED" if alarm has detected a CO level of 100ppm or higher since it was last reset, HushTM Feature-Silences nuisance alarms for approximately 9 minutes. (Smoke must be present before HushTM is activated)
Ionization Sensor Technology-Ideal for detecting fast flaming and other types of fires, est Button Functions:- Tests the unit for proper operation - Peak Level memory - Resets the Carbon Monoxide alarm
Green LED-Illuminates to indicate the unit is receiving AC power. Flashes once every 60 seconds to indicate battery only mode. Flashes once per second during alarm to indicate initiating alarm. Flashes once every 16 seconds to indicate smoke or CO previously detected. Flashes every 2 seconds while the alarm is in HUSHTM mode
Red LED-When a dangerous level of smoke or carbon monoxide is detected the red LED will flash. If the unit malfunctions, the red LED will flash and the unit will chirp every 30 seconds
Talking alarm announces the hazard type detected, helping to speed up reaction time
Combined carbon monoxide and smoke alarm, a single unit can be installed where previously two were needed
Battery safeguard ensures the unit cannot be accidentally mounted without batteries
Test-reset button tests alarm circuitry and triggers the voice announcement
Meets safety standards set by Underwriters Laboratories (UL) and interconnects with other KN-COSM-IBA models
120V AC, All Kidde brand hard wired smoke alarms are interconnectable with the KN-COSM-IBA
Description
This combination smoke/CO alarm features an 85dB horn and voice that announces "Fire", "Carbon Monoxide", and "Low Battery" warnings when detected. It can also interface with other Kidde interconnectable alarms. Meets NFPA 72 standards Smoke and Carbon Monoxide Alarm, Detection Method Ionization, Electrochemical, Up to 24 Units Interconnection Capability, Power Source 120VAC, 9V, Audible Alert 85dB @ 10 ft., Horn, Visual Alert Red LED, Diameter 5-3/4 In., Height 1-3/4 In., Digital Readout No, Battery Backup Yes, Features Voice Warning, Peak Level Memory, Reset Button, Hush Button Yes, Locking Pin Yes, Operating Temp. 40 Degrees to 100 Degrees F, Standards UL, Includes Mounting Anchors and Screws2. Kidde RF-SM-DC Wireless Interconnect Battery-Operated Smoke Alarm
Feature
Wireless technology uses radio frequency to transmit and receive messagesBattery power enables homeowners to install interconnected alarms without rewiring
Smart touch button quickly and temporarily silences nuisance alarms
Wireless alarm can be installed in a detached workshop or shed
Kidde wireless smoke alarms meet UL requirements. Interconnects Up to 24 devices ( of which 18 can be initiating). With 18 initiating devices (smoke, heat, CO, etc.) interconnected, it is still possible to interconnect 6 strobe lights and or relay modules
Description
Kidde RF-SM-DC Wireless Interconnect Battery-Operated Smoke Alarm3. Kidde Battery Operated Wireless Interconnect Smoke Alarm RF-SM-DC
Feature
Enables quick and easy installation of an interconnected smoke alarm system without messy wiring or labor. Temperature Range: 40 degree Fahrenheit to 100 degree FahrenheitWhen one alarm sounds, they all do: wireless technology uses radio frequency to both transmit and receive messages about a hazard in the home
Battery power enables homeowners to install interconnected alarms without rewiring
Smart touch button quickly and temporarily silences nuisance alarms
Wireless alarm can be installed in a detached workshop or shed
Description
Battery Operated Wireless Smoke Alarm, Quickly & Easily Install An Interconnected Alarm System, Includes Ionization Sensor, Not Available To Members In Oregon. This product adds a great value. Product is highly durable and very easy to use. This product is manufactured in China.4. Kidde AC Hardwired Wireless Interconnect Smoke Alarm RF-SM-ACDC
Feature
Makes it easy to expand the coverage of a current interconnected systemWhen one alarm sounds, they all do: wireless technology uses radio frequency to both transmit and receive messages about a hazard in the home
AC power with battery backup enables homeowners to expand a current interconnected system
Two universal adapters are included, allowing it to be used with most existing interconnected systems
Smart touch button quickly and temporarily silences nuisance alarms
Description
Kidde offers two wireless product options: a Battery Powered Smoke Alarm, and an AC Powered Smoke Alarm. These products enable you to customize your system based on your specific needs. Read below to see which Kidde wireless smoke alarms are best for your home. Kidde Wireless Smoke Alarms enable you to extend the coverage and protection of interconnected smoke alarms without any need for additional wiring! This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. The Kidde Wireless AC Powered Smoke Alarm makes it easy to expand the coverage of a current interconnected system. Simply replace one interconnected smoke alarm with the Kidde Wireless AC powered alarm. Kidde Wireless Battery Powered Smoke Alarms can be installed in additional rooms that need extra protection. This AC powered alarm bridges a homes current interconnected system to the newly installed alarms, so that when one alarm is triggered, all alarms will sound. Experts recommend interconnected alarms, because when one sounds, they all sound, providing an early warning against fire by dramatically increasing your ability to hear an alarm anywhere in your home, regardless of where the fire starts. Newer homes are required by code to have interconnected alarms. Wireless technology now enables any home to have an interconnected system.5. Kidde 21010625 Battery Operated Wireless Interconnected Combination Smoke & Carbon Monoxide Alarm
Feature
AA batteries required (best with Polaroid AA batteries)Kidde smoke and Carbon monoxide detector
Model: 21010625
Item is made in China
Battery operated wireless interconnected combination smoke & Carbon monoxide alarm
Description
Kidde wireless smoke and carbon monoxide detector. Kidde smoke and carbon monoxide detector. model: 21010625. Item is manufactured in China. Battery operated wireless interconnected combination smoke & carbon monoxide alarm.6. Kidde 1279-9999/RF-SM-AC Hardwire Smoke Alarm with Battery Backup, Interconnectable
Feature
Wireless technology uses radio frequency to both transmit and receive messages about a hazard in the homeAC power with battery backup enables homeowners to expand a current interconnected system
Two universal adapters included allowing it to be used with most existing interconnected systems
Smart touch button quickly and temporarily silences nuisance alarms
Kidde's smoke alarms meet the requirements of Underwriters Laboratories (UL), an independent facility that tests products for compliance with widely-accepted safety standards
Description
AC Wireless Hardwire Smoke Alarm, Easy To Expand Coverage Of A Current Interconnected System, Includes Battery Back Up & Ionization Sensor, Not Available To Members In Oregon. This product adds a great value. Product is highly durable and very easy to use. This product is manufactured in China.7. Kidde RF-SM-DC Wireless Interconnect Battery-Operated Smoke Alarm - Pack of 3
Feature
Wireless technology uses radio frequency to transmit and receive messagesWireless alarm can be installed in a detached workshop or shed
Kidde wireless smoke alarms meet UL requirements
Smart touch button quickly and temporarily silences nuisance alarms
Battery power enables homeowners to install interconnected alarms without rewiring
Description
What's in the Box One 0919-9999 smoke alarm with mounting bracket and mounting hardware, 3- AA batteries, a 10-year limited warranty and a bilingual user's manual. The Kidde 0919-9999 Battery-Operated Wireless Smoke Alarm allows for the easy installation of an interconnected smoke alarm system without the high cost and hassle of rewiring your home. The alarms are wirelessly linked so that when one alarm is triggered, all alarms will sound. This alarm can also be placed in a detached workshop or shed and linked into the home's interconnected system. Experts recommend interconnected alarms, because when one sounds, they all sound, providing an early warning against fire by dramatically increasing your ability to hear an alarm anywhere in your home, regardless of where the fire starts. Newer homes are required by code to have interconnected alarms. Wireless technology now enables any home to have an interconnected system. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. Choose the Right Wireless Alarms for Your Home Kidde offers two wireless product options: a Battery Powered Smoke Alarm, and an AC Powered Smoke Alarm. These products enable you to customize your system based on your specific needs. Read below to see which Kidde wireless smoke alarms are best for your home. Why Wireless? When one alarm sounds they all do Ability to interconnect without wires Install in minutes, anywhere in the home Less cost,8. Kidde P4010ACSCO-W 120-Volt Hardwired Combination Smoke/CO Voice Alarm with Intelligent Wire-Free Interconnect and 10-Year Battery (2)
Feature
Combination Smoke and CO detector requires hardwire installation10-year battery back-up for protection against power outages
All interconnected alarms will sound when one alarm goes off
P4010ACSCO-W
Wire-free interconnection with other intelligent alarms
Description
Kidde's NEW 120-Volt Hardwired Combination Smoke and Carbon monoxide Intelligent Wire-free Alarm connects with other intelligent Smoke and Intelligent combination alarms You do not need a home Wi-Fi system to use these units. Multiple wireless units create their own independent wire-free alarm network. Equipped with voice and wireless interconnect and a 10-year lithium battery backup. Compatible with Kidde, FireX, Code One, and Sentinel products Kidde offers a full range of 120V AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available. When any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning.9. Kidde KA-F - Quick Convert Adapter - Allows Installation of Kidde Alarm in Firex Wiring Harness(6 Pack)
Feature
Retrofit Firex to work with KiddeAC Plug-in
Quick Convert Adaptor
Description
The quick convert adapter allows the installation of a new Kidde alarm to an existing competitive wiring harness. This allows for easy installation when replacing the specified smoke alarm brands with a Kidde product. The smoke alarm adapter also allows the specified approved brands and models to be interconnected with other Kidde product.This adapter can only be used when replacing Firex models; FADC, ADC, AND AD.
These models have been tested for interconnect compatibility with the Kidde alarm models; 1235, 1275, 1276, 1285, i12020, i12040, i12060, i12080, i4618, PE120, PI2000, KN-COSM-IB, KN-COB-IC, KN-COP-IC, AND RF-SM-ACDC.
Recent Comments