Top 10 usb z-wave for 2018
If you looking for usb z-wave then you are right place. We are searching for the best usb z-wave on the market and analyze these products to provide you the best choice.
1. Aeotec Z-Stick Gen5, Z-Wave Plus USB to create gateway
Feature
Works with Windows / Mac / Linux (including Raspberry Pi) to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices.Tiny but powerful; 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices. package: 1x Z-Stick Gen5, 1x Manual, the others are not included.
Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades.
Compatible with Z-Wave enabled, home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included.
Z-Wave Plus certified. Certification number: ZC10-15060006
Description
Create your own Z-Wave gateway. With Z-Stick Gen5 youll be able to create your own Z-Wave hub using readily available, and sometimes free, home automation software. Youll benefit from a system that is locally hosted and cloud free, whose features, security and privacy you can personally control, and youll be able to create your Z-Wave network at your own pace and within your own budget. Capable of controlling up to 232 different Z-Wave devices, including those that use the more advanced Z-Wave Plus, and able to run on both full powered PCs and low powered PCs such as Raspberry Pi, Z-Stick Gen5 works with with open source software such as Domoticz , Home Assistant, OpenHab, and OpenHab2 and also works with commercially available software such as Axial Control, Homeseer, Indigo for MacOS. For enhanced network performance and reduced downtime, Z-Stick Gen5 contains an inbuilt, rechargeable info-lithium battery.2. HomeSeer SmartStick+ Z-Wave Plus USB Interface
Feature
Z-Wave Plus Certifed Interface for use with HomeSeer Software and HomeTrollersSupports Z-Wave Plus (and older) Products
Supports Network Wide Inclusion (NWI) for Easy Product "Pairing"
Provides Easy Upgrade Path from Z-Trollers, Z-Sticks and Most Other Z-Wave Interfaces
Cert ID: ZC10-15060014
Description
SmartStick+ is a Z-Wave Plus certified interface for use with HomeSeer home automation systems. SmartStick+ Network Wide Inclusion (NWI) for easy pairing of Z-Wave products. SmartStick+ may be used with Z-NETs for a centrally managed, muti-network installation. Note: This USB dongle is designed to work with HomeSeer HomeTrollers and also with smart home software from a variety of different companies. It presents itself as a virtual COM device and it operates on its own COM port. You'll need to connect to this COM port when setting to the dongle up with your system.3. Z-Wave.Me RaZberry2 - Z-Wave Plug-On Module for Raspberry Pi (EU Version)
Feature
Plug-on module turns any Raspberry Pi into a Z-Wave gatewayHardware plus pre-compiled Z-Wave controller software, based on JavaScript interface technology JSON
Optimized antenna for up to 200 m wireless range
Z-Way AJAX based demo user interface allows access to all Z-Wave functions and shows use of JSON interface
Description
The Z-Wave.Me RaZberry turns every Raspberry PI into a Z-Wave smart home gateway. The bundle of hardware and precompiled Z-Wave wireless network management software waits to be completed by your own user interface running in a web browser or a mobile phone.
The Z-Wave software provides an easy to understand and easy to use interface applying the well-known JavaScript interface technology JSON on a built-in web server. Writing your own home automation apps was never easier and more affordable!
The RaZberry 2 has an optimized antenna, wherewith the module can achieve a range of up to 200 meters.
4. Aeon Labs DSA02203-ZWUS Z-Wave Z-Stick Series 2 USB Dongle
Feature
Battery poweredAble to include/exclude z-wave devices from network
USB specification 2.0 compliant, full speed (12 Mbps)
Can be used with Linux, Windows XP, Server 2003/2000, and Vista
Description
The Series 2 Aeon Labs DSA02203-ZWUS, Z-Wave USB Z-Stick Controller from Aeotec is a Z-Wave USB adapter with push button for easy network creation.5. Linear HUSBZB-1
Feature
Provides interface between PC and Z-Wave/Zigbee networkPlugs into a standard USB port on the host device
Works with third-party home automation software
Appears as two (2) serial ports
Z-Wave Plus certified for wide compatibility
Description
QuickStick Combo ZigBee/Z-Wave USB Controller-Hub (PC-based)6. Fibaro FGWPB-111-ZW5 Z-Wave Plus Wall Plug without USB
Feature
Adds Z-Wave control to plug-in devices and monitors energy usageActive power consumption metering and surge protection for plug-in devices
Multi-color LED frame indicates load usage and can be used as a night-light
Multi-touch button adds/removes plug to Z-Wave network, edit local memory, and more
Compatible with any Z-Wave or Z-Wave Plus Controller and acts as a Z-Wave signal repeater
Description
The Fibaro Z-Wave Plus Wall Plug without USB supports a wide range of high voltage electronics and appliances and provides in-depth energy monitoring for plug-in devices. Devices plugged into the Wall Plug's Z-Wave outlet can be controlled remotely via Z-Wave, as well as locally with the button on the switch itself, or via the local switch that controls the outlet that the Wall Plug is plugged into. Program the Z-Wave plug-in outlet to turn On/Off on a schedule to save money and energy. The Fibaro Wall Plug can be remotely controlled with the mobile app of a connected Z-Wave controller. Through the app you can also check the status of connected devices, how much energy is being used, and turn the Z-Wave plug-in outlet On/Off at your discretion or according to a schedule. If you are controlling the Z-Wave plug-in outlet with a Fibaro controller, the Plug offers a power measurement feature that saves a history of power usage to help identify trends in power consumption and accurately measure how much electricity a plugged in device uses. The Fibaro Wall Plug features a multi-touch button to access the menu and perform the following actions: One click turns a controlled device ON/OFF or confirms selected menu option (if menu is active). Three clicks adds/removes the connected device to/from your Z-Wave network. Holding the button allows you to enter and navigate through the menu, where the LED frame will cycle through multiple colors representing different options. Releasing the button on a specified color will stop the cycle. NOTE: Requires a Z-Wave hub to operate. *Energy panel available only in FIBARO system based on Z-Wave. SPECS: Manufacturer Part #: FGPB-111-1 US. Frequency: 908.42 MHz. Power: 120V AC, 50/60 Hz. Max Load: Resistive loads: 15A, Incandescents: 8A, Inductive: 15A, Motor: 373. Operating Temperature: 32 - 104 degrees Fahrenheit (0 - 32 degrees Celsius). Dimensions: 2.32 x 2.32 x 2.01 inches. Range: Up to 130 ft. Approvals: UL Listed. Warranty: 1 Year.7. INFORMIC Zigbee CC2531 USB dongle adapter PacketSniffer protocol analyzer
Description
16 CHANNEL RELAY MODULE 12v FOR ARDUINO8. Aeotec Smart Switch 6 with USB Charging Port, Z-Wave Plus Wireless Control Socket Plug for Home Security Automation, 15A Mini Size
Feature
Z-Wave Plus smart plug with real-time energy metering and surge protection.Wireless on / off control, schedule, and automation of electronics plugged into switch.
USB port made to charge your smartphone or tablet
Tested to work with Z-Wave gateways including Fibaro, Home Assistant, Oomi, openHAB, Piper, SmartThings, Vera, and Wink.
Z-Wave Plus certified. Certification number: ZC10-15050012
Description
The perfect balance between design, size, features and safety, Smart Switch 6 is now 84% smaller than Aeotecs previous generations of Z-Wave smart plugs. Completely re-engineered and re-imagined from the inside out, Smart Switch 6 can be used to control and automated electronics and appliances that use up to 15 amps of power. Because its a smart plug, Smart Switch 6 will also monitor those electronics and report real-time electricity usage back to your Z-Wave system with up to 99% accuracy. Built upon Aeotecs leading Gen5 technology, this smart plug can be automated, scheduled, and remotely controlled via Z-Wave Plus while also acting as a Z-Wave repeater. But its not just a smart plug - Smart Switch 6 is also a convenient plug, offering side-port charging of smart phones and tablets so that USB charging are never out of reach and also a safe plug, offering inbuilt surge protection and over-current protection. Smart Switch 6 has been designed to work with certified Z-Wave systems including Fibaro, Home Assistant, Oomi, openHAB, Open Z-Wave, Piper, SmartThings, Vera, and Wink.9. USB Charger Wall Outlet Dual High Speed Duplex Receptacle 15 Amp, Smart 4.8A Quick Charging Capability, Tamper Resistant Outlet Wall plate Included UL Listed White MICMI C48 (4.8A USB outlet 4pack)
Feature
4.8 A charging capacity, charging two USB devices simultaneously without adapterswithout adapters Two High-tech "Smart" USB ports precisely read the power need and deliver optimum power charge accordingly
Max. 2.4A per USB port charge your iPhone, iPad, iPad Mini, Android, tablets, and much more without the need of power adapters
UL Listed. Compatible with USB 1.1/2.1/3.0 devices. Designed for back and side wiring for easy installation
1 YEAR WARRANTY - We provide 1 year warranty for this outlet, please email us for any query and we will be in touch within 24 hours. Replacement or refund will be provided for your preference. 30 Days Money Back Guarantee .
Description
MICMI C48 USB Charger Outlet charges two USB devices simultaneously without power adapters at high speeds at 4.8 Amp Child Safety Power Baby outlet with usb charging capacity. The smart Chip precisely reads the power need of your two devices to deliver optimal power accordingly without overcharging. Featuring the highest speed of power charging for two devices at the same time, this 4.8 Amps USB Charger is one of the best-selling products for end users, contractors and commercial areas. Users can charge two devices at the same time using the two USB hub ports and leave the two outlets free for other power needs. The product is compatible with USB 1.1/2.0/3.0 devices, including iPhones, iPads, Android & Windows phones, tablets, Samsung Galaxy, Samsung Note, Kindle, e-readers and any other USB compatible products. MICMI C48 Dual USB Charger Receptacle hub can be easily installed in the wall of your bedroom, living room, kitchen, and any other room to make power charging fast, easy and convenient. Your iPad, iPhone, tablets, Samsung Galaxy, Samsung Note and MP3 player now have a better power center, and your room will always look tidy and neat. This USB Charger Outlet is also great for commercial usage, including airports, hotels, restaurants, schools, offices, hospitals and etc. The receptacle is back and side wired for broad compatibility with diverse wiring needs. The product can fit in any standard in-wall outlet box. It is also compatible with standard wall-plates and can be multi-ganged with other MICMI devices, such as receptacles, motion sensors, switches and Z-Wave devices. Compatible with USB power strips. Safety is another important feature of MICMI C48 USB Charger Receptacle hub. The outlet complies with 2011 National Electrical Code (NEC) requirements. The Tamper resistant outlet features an internal shutter mechanism to protect children from sticking objects into the outlet. High speed charging is more convenient and efficient.10. Zooz Z-Wave Plus S2 Motion Sensor ZSE18 with Magnetic Mount, Works with Vera and SmartThings
Feature
FAST DETECTION: Reports motion to your Z-Wave smart home system reliably. Great solution for light automation and security monitoring. Z-Wave hub required, sold separately. Custom handler needed for SmartThings (contact seller for details). NOT supported by Wink, ADT, Vivint, or Alarm.com.EXTRA FEATURES: Adjustable motion sensitivity and retrigger time. Built-in Z-Wave range test tool for easier network troubleshooting. Vibration reports on SmartThings and other selected gateways.
2 POWER SOURCES: Runs on a single battery for up to a year (depending on traffic and settings) OR on micro USB cable (NOT INCLUDED). Acts as signal extender when connected to USB.
FLEXIBLE DESIGN: Extremely small and light, the sensor sits in a perfectly shaped magnetic mounting base for precise and firm positioning.
CERTIFIED SECURE: Uses the latest S2 Z-Wave protocol and AES-128 signal encryption. Z-Wave Plus chip for longer range and increased battery life.
Description
- NOTE: This sensor is supported by open Z-Wave systems ONLY. It will not work with Wink or Z-Wave alarm panels.
- Model Number: ZSE18
- Z-Wave Signal Frequency: 908.42 MHz
- Power: 1 CR123A battery (included) / Micro USB cable and power adapter (NOT included)
- Z-Wave Range: Up to 100 feet in open space
- Operating Temperature: 32-104 F
- Installation and Use: Indoor only
- Fibaro Home Center Lite
- SmartThings
- VeraPlus
Please contact seller if you're not sure your hub is compatible.
- SPECIFICATIONS:
Will it work with Alexa?
Amazon Echo is not a Z-Wave controller so you will need a compatible Z-Wave hub to get readings from this sensor from Alexa.
Alexa-compatible Z-Wave hubs include:
Recent Comments