Top 10 recommendation jaw and jaw turnbuckle for 2019
When you looking for jaw and jaw turnbuckle, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable jaw and jaw turnbuckle is not an easy task. In this post, we show you how to find the right jaw and jaw turnbuckle along with our top-rated reviews. Please check out our suggestions to find the best jaw and jaw turnbuckle for you.
1. Indusco 93900241 Hot Dipped Drop Forged Galvanized Steel Jaw and Jaw Turnbuckle, 3500 lbs Working Load Limit, 5/8" Threaded Diameter x 6" Take Up, 15-1/2" Length
Feature
Hot dipped galvanizedJaws are fitted with nuts and bolts
Meets design and performance requirements of ASTM F 1145 Class G
15-1/2-inches average overall length with ends in closed position
12.80-inches closed length
Description
Indusco hot dipped drop forged galvanized jaw and jaw turnbuckles. Meets design and performance requirements of ASTM F 1145 Class G. Turnbuckles are designed for use in straight line, do not subject to bending or unusual angles. End fittings are hot galvanized after threading. Hexagon ends on all bodies provide full wrench bearings. Turnbuckles must always be inspected for wear, distortion, cracks and damage before use. If worn, distorted or damaged, discard and replace. Turnbuckles are not designed for angular loading, so the loading must be applied in a straight line. Working load limit is based on a design factor of 5:1. 15-1/2-inches average overall length with ends in closed position. 12.80-inches closed length. 5/8-inches threaded diameter by 6-inches take up.2. Indusco 93900296 Hot Dipped Drop Forged Galvanized Steel Jaw and Jaw Turnbuckle, 3500 lbs Working Load Limit, 5/8" Threaded Diameter x 12" Take Up, 21-1/2" Length
Feature
Hot dipped galvanizedJaws are fitted with nuts and bolts
Meets design and performance requirements of ASTM F 1145 Class G
21-1/2-inches average overall length with ends in closed position
18.80-inches closed length
Description
Indusco hot dipped drop forged galvanized jaw and jaw turnbuckles. Meets design and performance requirements of ASTM F 1145 Class G. Turnbuckles are designed for use in straight line, do not subject to bending or unusual angles. End fittings are hot galvanized after threading. Hexagon ends on all bodies provide full wrench bearings. Turnbuckles must always be inspected for wear, distortion, cracks and damage before use. If worn, distorted or damaged, discard and replace. Turnbuckles are not designed for angular loading, so the loading must be applied in a straight line. Working load limit is based on a design factor of 5:1. 21-1/2-inches average overall length with ends in closed position. 18.80-inches closed length. 5/8-inches threaded diameter by 12-inches take up.3. Sydien 304 Stainless Steel Closed Body Jaw Turnbuckle Rigging Bottle Screw M6 2pcs (M6)
Feature
Rigging thread closing body elastic ring is suitable for tightening the elastic rope and adjusting the elastic effectMaterial: 304 stainless steel, marine grade, can be used in salt water environment
Total length: 161 mm / 6.34 inch; Body length: 95 mm / 3.74 inch;
Includes lock nut, high polished stainless steel flower basket
Package Includes: 2 x Closed Body Closed Body Jaw Turnbuckle
Description
Made of 304 stainless steel for maximum corrosion resistance and durability. A turnbuckle is a device used to adjust the tension or length of ropes and cables.It is usually composed of two threaded eyelets with a smooth body contour; these jaw and chin turners have metric threads.
This 304 stainless steel flower clip has a jaw and jaw at both ends and a closed body, which is an ideal installation tool.
NOTE: Lubricate regularly before the first use and flush all the tighteners regularly with fresh water. Regular inspections should be performed to check signs of damage, such as cracked terminals or cracks at the root of the thread, especially at the end of the thread.
4. AZ Lifting Hardware Forged Jaw/Jaw Turnbuckle, Galvanized
Feature
1/4 Fitting Shank Diameter(A)4 Body Take-up Inches (B)
7-15/16 - Overall Length Closed Inches (C)
12 - Overall length Open Inches (Ref.)
Rated Capacity: 500
Description
Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.5. Koch 104018 Forged Turnbuckle, 1/2-Inch by 6-Inch Jaw and Jaw, Galvanized
Feature
Turnbuckles have a strong construction and a galvanized finish that resists rust and corrosion.Suitable for outdoor applications
Open body style
The approximate length of the turnbuckle when closed is 13-5/16"
The safe working load limit is 2200 pounds
6. 1/2" x 6" - Jaw & Jaw Galvanized Turnbuckle
Feature
Hot dip galvanized for durability and weather resistanceMade for in-line or straight pull applications only
Features a jaw on each end which is fitted with a nut & bolt or a pin & cotter pin assembly
Size: 1/2" x 6" (Bolt Diameter x Length of Opening on the Body)
Working Load Limit: 2,200 lbs
Description
Our jaw and jaw turnbuckles are hot dip galvanized for durability and weather resistance. Made for in-line or straight pull applications only, our cable turnbuckles feature a jaw on each end which is fitted with a nut & bolt or a pin & cotter pin assembly.7. Koch 104013 Forged Turnbuckle, 3/8-Inch by 6-Inch Jaw and Jaw, Galvanized
Feature
Turnbuckles have a strong construction and a galvanized finish that resists rust and corrosion.Suitable for outdoor applications
Open body style
The approximate length of the turnbuckle when closed is 11-7/8"
The safe working load limit is 1200 pounds
8. Galvanized Turnbuckle - Jaw & Jaw - 3/8" x 6" - 4 Pack
Feature
Work Load Limit:1,200 lbsSize:3/8" x 6" (Bolt Diameter x Length of Opening on the Body)
Hot dip galvanized for durability and weather resistance
Made for in-line or straight pull applications only
Quantity: 4
Description
Our jaw and jaw turnbuckles are hot dip galvanized for durability and weather resistance. Made for in-line or straight pull applications only, our cable turnbuckles feature a jaw on each end which is fitted with a nut & bolt or a pin & cotter pin assembly.9. 1/2" x 9" - Galvanized Turnbuckle- Jaw & Jaw
Feature
Hot dip galvanized for durability and weather resistanceMade for in-line or straight pull applications only
Features a jaw on each end which is fitted with a nut & bolt or a pin & cotter pin assembly
Size: 1/2" x 9" (Bolt Diameter x Length of Opening on the Body)
Working Load Limit: 2,200 lbs
Description
Our jaw and jaw turnbuckles are hot dip galvanized for durability and weather resistance. Made for in-line or straight pull applications only, our cable turnbuckles feature a jaw on each end which is fitted with a nut & bolt or a pin & cotter pin assembly.10. Hot Dipped Galvanized Steel Jaw and Jaw Turnbuckle, 3500 lbs Working Load Limit, 3/8" Threaded Diameter x 12 - Durable, Weather Resistant
Feature
LONG-LASTING - Our turnbuckle uses hot dipped galvanization to protect the steel from humidity, corrosion, and other elements. No other kind of protective coating can give this much longeviy to steel, so you're sure to use our turnbuckle for years!SAFETY TESTED - Safety is our top priority. All of our products, including this galvanized steel turnbuckle, have passed EN71 test, CE and RoHS safety tests.
COMES WITH NUTS AND BOLTS - This jaw and jaw turnbuckle comes with nuts and bolts that are made of the same durable hot tipped galvanized steel.
MULTI-APPLICATION - This galvanized turnbuckle has a body opening that measures 18 inches, and a working load limit of 3,500lbs. You can use this to tension a zipline, fix a seat, straighten a tree, create a gate for your hunting cabin, or at home. The list goes on!
LIFETIME WARRANTY - We make sure that all the products we put out are of the best quality and give good value for money. However, if you have trouble with this jaw and jaw turnbuckle, we're offering a lifetime warranty!
Description
Assemble Safe, Durable Inline Rigging with this Hot Dipped Galvanized Steel Jaw and Jaw Turnbuckle!Do you need to adjust the tension of your boat's top mast or simply add length to your clothesline? This galvanized turnbuckle will do the job!
Here's why you should choose our product:
Certified Safe - This turnbuckle has passed the necessary safety tests like the EN71 test, CE and RoHS.
Durable Components - We used galvanized steel to significantly slow down wear and tear caused by natural weathering. This includes the nuts and bolts at each end.
Warranty for Life - We're confident in our product's longevity, so you can evoke the lifetime warranty should a problem come up with this turnbuckle.
Note: Turnbuckles are made to be used in a straight line. Do not try to bend this or use in angular assemblies.
When it comes to your assembly's safety, this jaw and jaw turnbuckle will not let you down. Add this to your cart right now!
Recent Comments