Top 10 recommendation cutting disc angle grinder
When you looking for cutting disc angle grinder, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable cutting disc angle grinder is not an easy task. In this post, we show you how to find the right cutting disc angle grinder along with our top-rated reviews. Please check out our suggestions to find the best cutting disc angle grinder for you.
1. Hitachi G12SR4 6.2-Amp 4-1/2-Inch Angle Grinder with 5 Abrasive Wheels
Feature
6.2 Amp motor with 980W of max output power for tough grinding jobsSpindle lock for quick and easy disc and accessory changes
Trigger lock-on for comfortable, continuous operation
Class leading overload durability for increased tool life and reliability
Left-mounted slide switch with quick-off feature for added safety
Removable, forward-canted side handle for improved control and comfort for right and left-handed users
Compact and lightweight at 4.0 lbs for greater control and maneuverability, especially in overhead applications
Low-profile gear case to get into the tightest areas
Small diameter grip for a comfortable hold and reduced fatigue
Description
The G12SR4 4 1/2" Angle Grinder removes casting fin, finishes various types of steel, bronze and aluminum materials and castings, grinds welded sections, sections cut by means of an acetylene torch, synthetic resins, slate, brick and marble. With it's small grip diameter, high output power and overload durability, it delivers great performance. This grinder comes with 5 grinding wheels and a carrying case. Includes Wheel Guard (338848), Side Handle (302142), Spanner Wrench (938332Z), Case (339264), Abrasive Depressed Center Wheels (5pcs).2. 4-1/2" Cut-off Wheels for Metal, for Cutting All Ferrous Metals and Stainless Steel
Feature
For use with angle grindersFully reinforced with fiberglass mesh for added safety and controlled performance
Tough aluminum oxide abrasive is continuously
exposed during use to maintain an aggressive cutting edge
40 GRIT
Description
Diameter: 4-1/2" Grit: 40 Arbor: 7/8" Thickness: 1/16" Maximum speed: 13,200 RPM If you cut a lot of metal, then these cut-off wheels are sure to make the cut. The 10 aluminum oxide blades each have a 7/8" arbor and handle a maximum speed up to 13,200 RPM.3. Makita 10 Pack - 4.5" Cut Off Wheels For Grinders - Aggressive Cutting For Metal & Stainless Steel/INOX - 4-1/2" x .045 x 7/8-Inch
Feature
10 MAKITA Premium 4-1/2" Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2" Angle Grinders and compatible with All 4-1/2" Angle Grinders with 5/8" arborCUT 2-3X MORE than lower quality or excessively thin wheels due to this wheel's Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita's High-performance aluminum oxide grain and proprietary hard bond matrix
AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita's proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear
DESIGNED for hard and continuous use on Stainless Steel, these Makita wheels are Quality Assured, Contaminant-Free, containing less than 0.1% Iron, Sulfur or Chlorine, for rust & corrosion-free results for your Stainless Steel material
Description
Optimize your metal cutting work with these 10 Makita Premier 4-1/2" Cutting Wheels for Metal and Stainless Steel such as rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces. When cutting, consider applying the proper amount of pressure at a 90 degree angle to allow the cutting wheel to do the work. For best results, consider not pushing too hard on the wheel, which can cause the grinder to stall or kick back or give a less efficient cutting action, while also increasing the chances of slippage or loss of control of the tool, resulting in injury or damage. Applying light to moderate pressure and consistent movement will provide the most efficient cut and minimize heat build-up. Consider using light pressure and a consistent motion throughout the cut for the fastest cut-rate and prolonged wheel life. Excessive pressure through the cut causes increased friction and heat build-up, which can cause increased heat discoloration of the work piece and reduced wheel life. For demanding applications, higher amperage &/or torque angle grinders provide easier, long-lasting & efficient cuts.4. 25 Pack 4-1/2" x 1/16" x 7/8" Metal and Stainless Steel Cut Off Wheels - For Angle Grinders
Feature
25 Pack Premium Metal Cutting Discs4-1/2" x 1/16" Cut Off Wheel with 7/8" Arbor
1/16 Inch (.0625") Thickness for Long Life and Increased Durability
Compatible with 4.5" Angle Grinder
Capable of cutting fiberglass, plastic, iron, steel, stainless steel, and other ferrous metals
Description
4-1/2" x 1/16" x 7/8" Cut Off Wheel by Black Hawk Abrasives is designed to cut and cut and cut without quitting. This disc features a 1/16" thick cutting edge for longer life and increased lateral strength compared to thinner cut off wheel alternatives thus making it ideal for aggressive cutting applications. Additionally, these 4.5 inch cutting discs are fiberglass mesh reinforced for further safety. These 4-1/2" cutting wheels are made to be attached to an angle grinder and can be used to cut steel, stainless steel, fiberglass, plastic irons and all other ferrous metals. These discs are extremely versatile and can be used from applications ranging from general metal cutting to slicing rebar to cutting angle iron.5. AUTOTOOLHOME 4.5" Diamond Angle Grinder Grinding Stone Brick Concrete Ceramic Tiles Dry Cutting Disc Wheel Saw
Feature
Diamond Cutting Disc Blade 4.5inch Segmented masonry angle grinder Disc Blade 115mm(4.5")A General Purpose Diamond Saw Blade Suitable for Cutting a Wide variety of Bricks and a range of concrete products
Idea for Wet/Dry Cutting in: Concrete, Masonry, Stone, Asphalt, Retractories and Granite
Size: 115 x 1.8 x 22mm(4.5x0.07x0.86inch)replacement 20mm(0.78") ring
13000 Rpm Max
Description
Features
100% High quality and Brand new.
Diamond Cutting Disc Blade 4.5 Segmented masonry angle grinder Disc Blade 115mm(4.5")?
A General Purpose Diamond Saw Blade Suitable for Cutting a Wide variety of Bricks and a range of concrete products.
Idea for Wet/Dry Cutting in: Concrete, Masonry, Stone, Asphalt, Retractories and Granite.
Outstanding Cutting Performance.
Long Cutting Life.
Specification
13000 Rpm Max
Bore 115 x 1.8 x 22mmreplacement 16mm ring(4.5x0.07x0.86inch)replacement 20mm(0.78") ring
Package Includes
1 x 115mm(4.5") diamond cutting disc
6. 10 Pack 4-1/2-Inch by 0.045-Inch Metal and Stainless Cutting Wheel, 7/8-Inch Arbor. Cutting Disc for Die Grinders Angle Grinders
Feature
Ultra Thin Design for fast burr free cutting, ideal for stainless and other metal cutting.Patented white aluminium oxide grain combination for aggressive cutting action.
Patented hybrid material can effectively reduce the high temperature generated during cutting and maintain metal stability.
Patented 2 full sheets of fiberglass for durability and safety, ensures durable long life wheels.
European Standard Certification: EN12413 WA60TBF41.
Description
About ASK Sturdy 4-1/2" Cut-off Wheels for Angle grinders etc.
ASK premium metal cut-off discs provide superior performance and increased productivity. These flap discs cut through material faster than other cut-off discs and offer an extra-long cutting life. Fully reinforced for use in hand-held cut-off work.
These blades are designed to give you a straight and fast cut each time without shattering or fragmenting.
Tough aluminum oxide abrasive is continuously exposed during use to maintain an aggressive cutting edge.
Info:
4.5 inch Cut off wheels, also known as parting wheels, are self-sharpening wheels that are thin in width. They are often used in the construction industry for cutting reinforcement bars (rebar), protruding bolts or anything that needs quick removal or trimming.
You Get:
A Pack of 10 Cut-Off Discs
With this Value Pack of 10 Wheels, you can get through any stubborn project whether small or big, and you will never have to think twice before throwing away a used worn defective disk.
Benefits:
Straight Fast Clean cut.
Shatter/Fragment Proof.
Cut aluminum gutters easily.
Cut bolts and screws.
Make slots in rusted or stripped bolts & screws for removal with a screwdriver.
Will cut through Rebar's, Metal shafts and Hard Steel cases like a knife through butter.
Make fast, clean cuts in ferrous sheet metals, including iron and through a bunch of stainless steel studs with these abrasive cut-off wheels.
Remember:
Always use protective gear and approved safety guard - Do not over speed the wheels - Use extreme caution.
Tip:
The more stable you are able to get the grinder the better the blade will cut through the object.
Happy grinding. Don't forget safety glasses.
7. Grinding Wheels Flap Grinding Wheels For Angle Grinder - 5 Piece 4 Finish work, deburring, and light grinding Size 4 1/2 X 7/8- Grit Aluminum Oxide: Grit #40, 60, 80, 120, 180, Katzco
Feature
PACKAGE CONTAINS: 5 piece Flap wheel size: 4 1/2"" x 7/8"" Max RPM: 11000 One of each Grit size: #40, #60, #80, #120, #180PERFECT FOR: Finish work, deburring, snagging and light grinding. Rust removal, flash removal Auto Body Sanding
APPLICABLE FOR: Auto body panels, hard and soft woods, ferrous and non-ferrous metals, and composites.
HIGH QUALITY: Aluminum Oxide Flap Discs Resin fiber with fiberglass backing plate Phenolic resin backing offers durability and reinforcement
SATISFACTION GUARANTEED Katzco will make sure that you will be satisfied with the flap wheel you buy from us. You are protected with our 100% No Questions Asked Guarantee for either a replacement or refund. We care about only putting out high quality products that satisfy your needs. If there is anything you need that we don't offer we go and find the best for you.
Description
Grinding Wheels - Flap Grinding Wheels For Angle Grinder - 5 Piece 4 Finish work, deburring, and light grinding Size 4 1/2" X 7/8- Grit Aluminum Oxide: Grit #40, #60, #80, #120, #180, - By KatzcoSave Time, Money and Simplify your essential metalwork with Katzco Flap Grinding wheels getting the most work out of your Angle Grinder with the right amount of wheels for each action.
You get Flap wheel size: 4 1/2"" x 7/8"" Max RPM: 11000 One of each Grit size: #40, #60, #80, #120, #180
You get these wheels do their job quickly. They don't wear down easily either.
A good value purchase these wheels are the absolute best!
You can grind. This is a fantastic flap grinding wheel for angle grinders perfect for:
Finish work,
Deburring,
Snagging and light grinding.
Rust removal,
Flash removal Auto Body Sanding
Auto body panels,
Hard and soft woods,
Ferrous and non-ferrous metals and composites.
Spend your money for the good ones katzco will get you satisfied get yours today Try it, totally risk free!
If for any reason you decide you don't like it, just send a simple email and get a full refund! Absolutely no questions asked, so you have nothing to lose, click add to cart now
8. Makita 5 Pack - 4.5" Cut Off Wheels For Grinders - Aggressive Cutting For Metal & Stainless Steel/INOX - 4-1/2" x .045 x 7/8-Inch | Flat Cutting Wheels
Feature
5 MAKITA Premium 4-1/2" Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2" Angle Grinders and compatible with All 4-1/2" Angle Grinders with 5/8" arborCUT 2-3X More than lower quality or excessively thin wheels due to this wheel's Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita's High-performance aluminum oxide grain and proprietary hard bond matrix
AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita's proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear
DESIGNED for hard and continuous use on Stainless Steel, these Makita wheels are Quality Assured, Contaminant-Free, containing less than 0.1% Iron, Sulfur or Chlorine, for rust & corrosion-free results for your Stainless Steel material
Description
Optimize your metal cutting work with these 5 Makita Premier 4-1/2" Cutting Wheels for Metal and Stainless Steel such as rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces. When cutting, consider applying the proper amount of pressure at a 90 degree angle to allow the cutting wheel to do the work. For best results, consider not pushing too hard on the wheel, which can cause the grinder to stall or kick back or give a less efficient cutting action, while also increasing the chances of slippage or loss of control of the tool, resulting in injury or damage. Applying light to moderate pressure and consistent movement will provide the most efficient cut and minimize heat build-up. Consider using light pressure and a consistent motion throughout the cut for the fastest cut-rate and prolonged wheel life. Excessive pressure through the cut causes increased friction and heat build-up, which can cause increased heat discoloration of the work piece and reduced wheel life. For demanding applications, higher amperage &/or torque angle grinders provide easier, long-lasting & efficient cuts.9. All-Purpose 4 1/2-Inch (4.5") High Performance Metal Cutting Diamond Blade, Wet or Dry with Cooling Holes for Steel, Rebar, Sheet Metal, Pipe, Angle Iron, and Plastics (4 1/2-Inch)
Feature
METAL CUTTING & MULTI PURPOSE- Vacuum-Brazed Diamond Blades are excellent for cutting all ferrous and non-ferrous metals including sheet metal, pipe, metal plate, steel bar, angle iron, ductile iron, and rebar. It can also cut concrete, masonry, plastics and wood.LASTS MANY TIMES LONGER WITH A CONSTANT CUTTING DEPTH - Equivalent to multiple packs of abrasive metal cutting blades, you'll save time by using one blade without having to constantly put on a new disc. Traditional abrasive discs wear down and shrink which can be dangerous. This diamond blade maintains a constant cutting depth throughout the life of the blade.
USE WET OR DRY - Engineered to be used in the most demanding of situations.
LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge.
Size: 4.5" X .09" X 7/8"-5/8" Arbor | Wet or Dry | Fits on most hand-held grinders and trim saws.
Description
Diamond cut-off wheels are the new standard for metal cutting and offer many advantages over conventional abrasive discs. Use for cutting through all ferrous and non-ferrous metals including sheet metal, pipe, metal plate, steel bar, angle iron, ductile iron and rebar. Diamond cut-off wheels last many times longer than abrasive wheels while delivering a constant cutting depth. The high quality super-abrasive diamonds are vacuum brazed to a steel core creating the strongest possible bond. - Delivers 1,000's more cuts than abrasive wheels without having to constantly change the blade. - Heat-treated hi-speed steel core dissipates heat and minimizes the risk of breaking or warping. - Diamond cut-off wheels maintain a constant cutting depth throughout the life of the blade. - Use on most hand-held grinders and trim saws.10. Peakit Dry Wet Tile Cutter Blade 4 Inch Porcelain Diamond Saw Blade Ceramic Cutting Disc for Angle Grinder or Tile Saw
Feature
Peakit Super thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you. Thicker center to avoid vibrations and wobbling. High Performance diamond matrix provides long life and enhanced material removal.Our Diamond saw blade can be used as porcelain tile blade, ceramia tile cutter, granite blade and other thin masonry blade.
This 4in tile cutting blade features a 3/8" diamond rim, can be used dry or wet, fits most tile saws and hand-held angle grinders with a 7/8" Arbor.
It is the ideal diamond saw blade for tile installer, general contractors, home made DIYers and tradesmen.
What you will get: fast 4in diamond blade 1 pcs, lifetime warranty against warping, cracking and material defects, superior customer service.
Description
Peakit super thin diamond blade circular saw blade turbo mesh blade, blue color
SIZE: Diameter 4", Segment Height 3/8", Inner hole 7/8"
FEATURE:
1. Professional quality for porcelain, ceramic, granite or natural stone tiles cutting.
2. Unique mesh rim blade, X teeth offer fast and smooth cutting.
3. Hot pressed tile cutting disc provide long life.
4. Fits most tile saw and angle grinders with a 7/8" arbor. 14,500 RPM Max, available for both dry and wet cutting work.
LIFETIME WARRANTY & FREE RETURN SHIPPING - All Peakit diamond tools like Diamond Blades, Coring Bits, polishing pad, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects.
Recent Comments