Top 10 recommendation bushing tool
Finding the best bushing tool suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
1. Shankly 50 Piece Seal Drive Set, Bushing Removal Tool, Bushing Driver Set
Feature
THE RIGHT SIZE: The Shankly bushing removal tool kit allows you to build your own custom bushing driver so you always have the right size for the job.COMPLETE SET: The discs go from 18mm (.7 inches) all the way to 65mm (2.51 inches) in 1mm increments plus 74mm (2.91 inches). All discs are connected with a 12mm (.47 inches) shaft and screw which quickly connects to a 180mm (7.08 inch) handle. Making the Shankly wheel bearing driver set complete and effective.
INTERCHANGEABLE: All 50 pieces are interchangeable with each other so you get different sized variations in one set, allowing the mechanic to complete the job quickly, professionally and promptly. Complete set details in description below.
IMPRESSIVE VARIATIONS: The Shankly bearing and seal driver set has 50 interchangeable discs, giving the user an amazing 2,450 different variations due to each of the 50 discs being interchangeable with each other.
HEAVY DUTY, ORGANIZED CASE: Set comes in a heavy duty, blow molded case with compartments for every piece, making storage and transport easy and manageable.
Description
The Shankly bushing removal tool kit allows you to build your own custom bushing driver so you always have the right size for the job. The Shankly bushing removal tool kit allows you to build your own custom bushing driver so you always have the right size for the job. The discs go from 18mm (.7 inches) all the way to 65mm (2.51 inches) in 1mm increments plus 74mm (2.91 inches). All discs are connected with a 12mm (.47 inches) shaft and screw which quickly connects to a 180mm (7.08 inch) handle. Making the Shankly wheel bearing driver set complete and effective. All 50 pieces are interchangeable with each other so you get different sized variations in one set, allowing the mechanic to complete the job quickly, professionally and promptly. The Shankly bearing and seal driver set has 50 interchangeable discs, giving the user an amazing 2,450 different variations due to each of the 50 discs being interchangeable with each other. Set comes in a heavy duty, blow molded case with compartments for every piece, making storage and transport easy and manageable.
Bushing Driver Set consists of the following sizes:
18mm, 25/32'; 43mm, 1-11/16"; 19mm, 3/4'; 44mm, 1-23/32"; 20mm, 25/32"; 45mm, 1-25/32"; 21mm, 27/32; 46mm, 1-13/16"; 22mm, 7/8"; 47mm, 1-27/32"; 23mm, 29/32"' 48mm, 1-15/16"; 24mm, 15/16"; 49mm, 1-31/32"; 25mm, 1"; 50mm, 2"; 26mm, 1-1/16"; 51mm, 2-1/32"; 27mm, 1-1/16"; 52mm, 2-1/16"; 28mm, 1-3/32"; 53mm, 2-1/8"; 29mm, 1-5/32"; 54mm, 2-3/32"; 30mm, 1-3/16"; 55mm, 2-5/32"; 31mm, 1-7/32"; 56mm, 2-7/32"; 32mm, 1-1/4"; 57mm, 2-1/4"; 33mm, 1-9/32"; 58mm, 2-9/32"; 34mm, 1-11/32"; 59mm, 2-11/32" ; 35mm, 1-3/8"; 60mm, 2-3/8"; 36mm, 1-13/32"; 61mm, 2-13/32"; 37mm, 1-15/32" ; 62mm, 2-7/16"; 38mm, 1-1/2"; 63mm, 2-1/2"; 39mm, 1-17/32"; 64mm, 2-17/32"; 40mm, 1-19/32" ; 65mm, 2-9/16"; 41mm, 1-.5/8"; 74mm, 2-29/32"; 42mm, 1-21/32". All pieces come in a heavy duty blow molded case with compartments for every piece.
2. OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set
Feature
Reduces the possibility of damaging the bearing/suspension housingsSupplied with four stepped end plates and four force screws in carry-case;
Plates and sleeves can also be used in a standard workshop press when on site access isn't possible;
Comes with 20 cups and receivers for 100's Combinations
Sleeve wall thickness: 5mm, sleeve height: 94mm;
Description
Comprehensive kit for fast and effective removal/installation of wheel bearings/suspension bushings and seals. Allows the technician to service a wide range of bushings without removing components from the vehicle. Works on silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, etc.3. Schley (SCH11100) Manual Bushing R and R Tool Set
Feature
Save time by not removing components and using a conventional pressAllows quick R and R of suspension bushings
Comes with 22 cups and receivers for 100's of size combinations
Cup and receiver size ranges, OD 44 mm / ID 34 mm to OD 85 mm / ID 75 mm
4 ACME treaded spindles, 10 mm, 12 mm, 14 mm, and 16 mm featuring ball bearing thrust washers
Description
- Save time by not removing components and using a conventional press
- Allows quick R and R of suspension bushings
- Comes with 22 cups and receivers for 100's of size combinations
- Cup and receiver size ranges, OD 44 mm / ID 34 mm to OD 85 mm / ID 75 mm
- 4 ACME treaded spindles, 10 mm, 12 mm, 14 mm, and 16 mm featuring ball bearing thrust washers
Manual Bushing R and R Tool allows the technician to service a wide range of bushings without removing components from the vehicle. Due to the awkward dimensions of many suspension components using a conventional press to remove and replace bushings can be time consuming and frustrating. This complete system can be used to service the vehicle anywhere in the shop.
4. Powerbuilt 648604 Kit 25 Upper Control Arm Bushing Service Tool Set for Ford, GM and Chrysler
Feature
Made to be the most reliable tools in the market todayTool solutions for most all situations
Built to exceed tool standards
11-Piece tool set for removing and installing press-in bushings
Allows changing the press-in bushings without removing the control arm
For use on rear wheel drive Ford, GM and Chrysler vehicles
For use on autos only - Not designed for trucks
Storage case includes usage photos
Description
Powerbuilt by Alltrade Tools LLC is a global leader in the design, manufacturing and marketing of tools and shop equipment. Founded in 1979, the Long Beach, California based firm is privately held, with global manufacturing and sales facilities serving customers on every continent. The company's mission statement: Alltrade designs, markets and supplies tools and shop equipment that meet and exceed our customers' expectations of quality, service and value, while achieving profits to ensure the Company's and its employees' future growth and development. Alltrade offers our customers innovation, flexibility and speed to market.5. EWK 27PC Universal Bearing Press and Pull Sleeve Kit Bush Removal Tool Installer Remover
Feature
SUSPENSION SYSTEM MAINTANENCE - The Set Is Designed To Quickly Remove And Install Bearings And Bushings Which Increase The Responsiveness Of A Car And Give A More Pleasant Ride If Well Maintained.UNIVERSAL PRESS & PULL KIT - The Bearing Press Kit Deals With A Variety Of Components, Including Normal Bearings, Silent Bearings, Hydraulic Bearings, Rubber Bearings, Bearing Bushes, Shaft Seals Etc.
WIDE APPLICATION - With 5 Pulling Spindles And 22 Press Sleeves, The Complete Set Is Suitable For Cars, LCV And HGV. Take Care Of All Of Your Vehicles With One Set.
SAVE YOUR TIME AND MONEY - The Bush Insertion And Extraction Tools Make The Job Easy And Efficient, No More Time And Money Wasted On Taking Your Control Arms To A Work Shop.
ALWAYS CHOOSE QUALITY TOOLS - The Heavy Duty Sleeves Are Made Of Quality Metal Materials, Durable And Do No Harm To Your Suspension Housings. The Best Choice To Do The Job With!
Description
Designed for removal and installation of bearings, bushes, seals.Customer Service
1. Office hours: Monday to Friday 9:00am to 3:30pm (Pacific Time).
2. We will reply your message within 24~48 hours.
Shipping
1. Monday to Friday (orders placed before AM8:00) will be shipped within 24 hours.
2. Orders placed after Friday AM8:00 or national holiday will be shipped on the coming business day.
3. Buyers responsible for all custom and brokerage fees for shipments outside of the United States.
30 Days Money Back Guarantee
1. Customer MUST contact us within 30 days after the purchasing.
2. Item must be sellable condition with the original packaging. Fees may apply if item is determined as not original condition.
3. Buyer should be responsible for the return freight.
4. 20% restocking fee is NON-REFUNDABLE under any circumstances.
Warranty
1. Most of items which were marked "warranty" on the selling page apply to the warranty policy. Some item is not included.
2. Warranty period: 1 year
3. The warranty only covers the defects under normal use.
4. The warranty DOES NOT cover the defect was subjected to misuse, negligence or accident.
5. The warranty DOES NOT cover consumable parts.
6. EWK reserves the right of final decision.
6. Alltrade 648617 Kit #46 Master Ball Joint / U-Joint Service Tool Set - 23 Piece
Feature
Removes and installs pressed-in type ball joints found on most vehiclesChanges ball joint without removing control arm from the vehicle
Tools can also be used to remove and install U Joints
Remove and install pressed-in Ball Joints found on most vehicles
Remove and install special threaded upper Ball Joints found on many Chrysler vehicles
Allows changing the ball joint without removing the Control Arm from the vehicle
Tools can also be used to remove and install U Joints
Kit includes step-by-step usage instructions
Description
Look no further for a perfect tool set to install and remove vehicle ball and U joints. The Powerbuilt Ball Joint & U Joint Service Set includes 23 tools perfect for working with pressed-in type ball joints found on most vehicles. It saves you work by letting you change ball joints without removing control arm from the vehicle. This set includes receiving and installing tubes, cups, and adapters, and all the accessories you'll need to get the job done. Carry case includes usage photos and instructions. Meets or exceeds ANSI standards. Lifetime warranty. This set includes: - Plug:OD 7/8" - Receiving Tube: OD 2-1/4" ID 2", 2"- Installing Tube: OD 2" ID 1-3/4", 3" - Receiving Tube: OD 2-1/2" ID: 2-1/4", 1-1/2" - Receiving Cup: OD 2 -1/4" ID 1-7/8", 7/16" - Receiving Tube: OD 2 1/2", 2-1/4", 3/4" - Receiving Tube: OD 2-7/16" ID 2-3/16", 3-3/16" - Remover/installer: OD 1-7/16" ID 3/4", 1" - Installing Tube: OD 2" ID 1-3/4", 2-5/16" - Receiving Cup: OD 2-1/8 ID 1-3/4", 1/2" - Receiving Tube: OD 2-1/2" ID 2-1/4", 2-3/4" - Receiving Tube: OD 3" ID 2-3/4", 2-1/4" - Receiving Tube: OD 2-3/4", ID 2-7/16", 2-1/4"- Receiving Tube: OD 2-7/8" ID 2-5/8", 2-7/8" - Screw -C-frame - Receiving Tube: 1-3/4" X 2" - Receiving Tube: 2-1/4" X 2-1/2" - Receiving Tube: 2-3/4" X 3" - Removal Adapter - Install Adapter 3/4"dr. X 1-59/64" - Install Adapter 3/4"dr. X 2-9/64"- Blow Molded Case -Removes and installs pressed-in type ball joints found on most vehicles -Changes ball joint without removing control arm from the vehicle -Tools can also be used to remove and install U Joints -Carry case includes usage photos and instructions -Meets or exceeds ANSI standards7. OrionMotorTech 23-Piece FWD Front Wheel Drive Bearing Adapters Puller Press Replacement Installer Removal Tool Kit
Feature
ALL-IN-ONE KIT, everything you need for a fast & effective removal and installation of wheel bearings on front wheel drive vehicles; easily replaces wheel bearings while keeping the steering knuckle and strut assembled in tact on the vehicleEFFECTIVE KIT, designed to work with the steering knuckle and strut assembly still on the vehicle, eliminating the need for front end alignment after service work
UNIVERSAL COMPATIBILITY, designed for front wheel drive cars and small trucks; comes with a premium well-organized ABS box for easy storage and transport
STURDY & ANTI-RUST, heavy-duty carbon steel construction; black anodic oxidation for ultimate anti-rust performance
WARRANTY, backed by 2-year limited warranty from the manufacturer, free return or exchange if the item is defective. 🔴WARNING🔴 AVOID using an impact wrench; improper usage may cause DAMAGE to NUT or BOLT
Description
Specifications:Dimensions: 17.7" * 12.2" * 4.1"
Item weight: 24 lbs
Adapter Drift sizes Approx.: 50mm, 55mm, 60mm, 64mm,67mm, 70mm, 72mm, 74mm, 75mm, 78mm, 82mm, 84mm, 88mm.
Receiver Sleeves sizes Approx.: 102mm, 91mm, 86.3mm, 76mm. Drive Shaft : 32mm and 38mm.
8. ABN Ball Joint Press 10pc Set Ball Joint Tool, Bushing Removal Tool Service Tool Kit with 4-Wheel Drive 4WD Adapter
Feature
EASILY PULL PARTS: Use the ABN Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicleBUILT TO LAST: Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion
FITS YOUR VEHICLE: Compatible with most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints
EASY STORAGE: Ball joint tool / bushing removal toolkit is enclosed inside a heavy-duty 11" x 3" x 15" inch (27.9cm x 7.6cm x 38.1cm) plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization
PACKAGE CONTENTS: Package includes (1) C-frame press and forcing screw, (3) installation adapters with cups, (3) removal adapters with cups, (3) receiver tubes - 2.75" x 3", 2.25" x 2.5", 1.75" x 2", and (1) carrying case for your convenience
Description
Everything you need to service ball joints on your vehicle is included in the ABN Ball Joint Press & Adapter Set. With this kit, you can effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle. All parts are constructed from forged steel with a black-oxide finish on the adapters for maximum strength and longevity that resists rust and corrosion. We recommend a 7/8-inch or 22mm socket to turn the C-clamp and spare steel plates or large washers to help when space is tight. This package includes (1) C-frame press and forcing screw, (3) installation adapters with cups, (3) removal adapters with cups, (3) receiver tubes, and (1) carrying case. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.9. Neiko 20658A Non Slip Grip Handles Aluminum Race Bearing Seal and Axle Bushing Driver Set (19 Piece)
Feature
Enables you to remove and install bushings ranging from 10mm to 42mm / 3/8-inch to 1-3/8 inch in diameter for use on cars, trucks, tractors and construction equipmentThe driver can be used in other components with bushings ranging from 3/8-inch to 1-3/8-inch in diameter
Set comes with three heavy-forged metal, no-slip driver handles and 16-piece bushing adapters
Two disc sizes allow you to keep the pushing disc lined up; all pieces are engraved for easy identification
Set includes B1-B16 adapters, nuts for D1, D2 and D3 drivers, and are safely organized in a hangable hard plastic carrying case
Description
The Neiko 20658A race and seal bush driver tool set includes a hard plastic carrying case, bushings ranging from 10mm to 42mm in diameter, and the following adaptors: B1~B16 and nut for D1&D2 Driver & Nut for D3 driver10. Insulated Screwdriver, 3/8-Inch Cabinet Tip with 8-Inch Shank Klein Tools 602-8-INS
Feature
1000V Rated for safetyDurable, two-layer, molded insulation to meet or exceed all ASTM and IEC standards for insulated tools
Custom US-made tool steel
Cushion-Grip handle for superior torque and comfort
This sku replaces 602-10-INS
Recent Comments