Top 10 clamps ear for 2018
If you looking for clamps ear then you are right place. We are searching for the best clamps ear on the market and analyze these products to provide you the best choice.
1. Oetiker 18500060 StepLess 1-Ear Clamp Kit (StepLess Ear Clamps, stainless steel with standard jaw single action pincer)
Feature
Clamp ear is dimpled for increased clamp forceMechanical interlock for secure closure and better corrosion resistance than a spot-weld
Stainless steel for resisting scaling and corrosion
Corrosion resistance 1000 hours in compliance with DIN EN ISO 9227
Description
This Oetiker 18500060 StepLess one-ear clamp kit contains stainless steel StepLess one-ear clamps and a pair of standard jaw pincers for clamping hose clamps in a variety of diameters. The dimple or indentation on the ear of the clamp increases the clamping force for a more secure hold, and the mechanical interlock of this clamp keeps it securely closed and provides better corrosion resistance than a spot-weld, which is vulnerable to corrosion. The ear clamps are stainless steel for resisting scaling and corrosion for at least 1000 hours of exposure to salt spray in compliance with Deutsches Institut fr Normung-English International Organization for Standardization (DIN EN ISO) standard 9227. This clamp kit is suitable for attaching a variety of hoses to fittings or other devices in various industrial applications, such as heavy machinery, hydraulics, irrigation, food processing, automobile manufacturing, and petroleum industries, among others. Hose clamps attach tubing and hoses to fittings to prevent flow leakage, or are used for hose or wire mounting applications. They come in a variety of designs to distribute uniform pressure over the circumference of hoses to bind them to fittings. Other hose clamp types are used for mounting, strapping, clamping, and positioning hose or wire. Hose clamps are suitable for a large number of industries, and commonly used in industrial, electronic, and automotive applications. Oetiker manufactures hose clamps, rings, couplings, conveyor chains, hinged belts, and other connecting parts and accessories. The company, founded in 1942 and headquartered in Horgen, Switzerland, meets International Organization for Standardization/Technical Specification (ISO/TS) standard 16949. What's in the Box? 10 1/2"/13.3mm StepLess 1-ear clamps 10 9/16"/14.5mm StepLess 1-ear clamps 10 5/8"/15.7mm StepLess 1-ear clamps 10 23/32"/18.5mm StepLess 1-ear clamps 10 7/8"/22.6mm StepLess 1-ear clamps 10 1"/25.6mm StepLess 1-ear clamps 10 1-1/8"/28.6mm StepLess 1-ear clamps 10 1-1/4"/31.6mm StepLess 1-ear clamps 1 Pair standard jaw pincers Instructions2. Glarks 42Pcs 7-21mm 304 Stainless Steel Single Ear Stepless Hose Clamps Assortment Kit
Feature
1. Product Type: High Precision Single Ear Stepless Hose Clamps2. Material: 304 Stainless Steel, Corrosion-Resistant , Will Not Rust For Long-Term Use
3. Package Include: 7-21mm 7 Kind Of Size 40pcs Total In A Clear Box, Easy To Store
4. 360 Stepless Design - There Is No Protrusion And Gap In The Inner, Narrowband Design Providing A More Concentrated Sealing Pressure
5. Cochlear Design Ensures Continuous Clamping During Temperature Changes Or Machine Vibrations, Edge Polished Smooth, Avoid Damage To The Hose
Description
Product Type: High Precision Single Ear Stepless Hose ClampsFeature1: 360 stepless design - there is no protrusion and gap in the inner ring
Feature2: Narrowband design providing a more concentrated sealing pressure
Feature3: Edge Polished smooth, avoid damage to the hose
Feature4: Cochlear design ensures continuous clamping during temperature changes or machine vibrations
Package: 42pcs High quality Single Ear stepless Hose Clamps in a clear box, Very easy to install and store
Application: Perfect for Indoor hot water pipes, air conditioning pipes, petrochemical transport pipeline and so on
Package included:
6-7mm -------------------- 6pcs
7-8.7mm ------------------ 6pcs
8.8-10.5mm -------------- 6pcs
10.3-12.8 ----------------- 6pcs
12.8-15.3 ----------------- 6pcs
15.3-18.5 ----------------- 6pcs
17.8-21 -------------------- 6pcs
3. Oetiker 16700031 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 22.4 mm (Closed) - 25.6 mm (Open) (Pack of 100)
Feature
Clamp ear is dimpled for increased clamp forceVisible deformation of ear for evidence of proper closure
Mechanical interlock for secure closure and better corrosion resistance than a spot-weld
Stainless steel for resisting scaling and corrosion
Description
This Oetiker 167 Series stainless steel Stepless one-ear hose clamp is for clamping hoses. The dimple or indentation on the ear of the clamp increases the clamping force for a more secure hold, and the mechanical interlock of this clamp keeps it securely closed and provides better corrosion resistance than a spot-weld, which is vulnerable to corrosion. The ear is visibly deformed when clamped correctly, providing assurance of proper closure. It's also made of stainless steel for resisting scaling and corrosion. This clamp is suitable for attaching hoses to fittings or other devices for applications such as food processing and commercial fishing that involve exposure to corrosive elements, particularly salt water.
Hose clamps attach tubing and hoses to fittings to prevent flow leakage, or are used for hose or wire mounting applications. They come in a variety of designs to distribute uniform pressure over the circumference of hoses to bind them to fittings. Other hose clamp types are used for mounting, strapping, clamping, and positioning hose or wire. Hose clamps are suitable for a large number of industries, and commonly used in industrial, electronic, and automotive applications.
Oetiker manufactures hose clamps, rings, couplings, conveyor chains, hinged belts, and other connecting parts and accessories. The company, founded in 1942 and headquartered in Horgen, Switzerland, meets International Organization for Standardization/Technical Specification (ISO/TS) standard 16949.
4. Oetiker Stepless OET070157-50PCK-EP Clamp Assortment Case, Ear Clamps, Single Ear Hose Clamps with Pincers, 1/4"- 5/8" (Pack of 50)
Feature
Genuine oetiker clamps - 10 each of 1/4"(7.0 mm), 3/8" (9.5 mm), 7/16" (11.3 mm), 1/2" (13.3 mm), and 5/8"(15.7 mm)360 stepless design - No steps or gaps on inner circumference
Narrow Band, concentrated seal compression
Specially formed strip edges reduce the risk of damage to the part being clamped
Please note - the Size of the Clamp denotes the inner dimension (ID) of the Clamp
Description
Included in the Kit:
10 of 7 mm Clamp, Part No. 16700001
10 of 9.5 mm Clamp, Part No. 16700004
10 of 11.3 mm Clamp, Part No. 16700007
10 of 13.3 mm Clamp, Part No. 16700010
10 of 15.7 mm Clamp, Part No. 16700016
Straight Jaw Pincer, Part No. 14100396
Genuine Oetiker Clamps
Stainless Steel, Material no. 1.4301/UNS S30400
What is StepLess Technology?
Oetiker invented the StepLess ear clamp in 1979. The ear clamps special design eliminates steps and/or overlaps on the inner circumference of the clamp for a 360 leak-free seal. Because the tongue resides in a groove, the tongue-in-groove feature exerts pressure on the assembled parts over 360, enabling the clamp to apply a continuous radial force completely around the connections diameter.
Mechanical interlock
The interlock is a mechanical system for joining the clamp ends to permit closure. Some interlock designs can be opened for radial installation prior to closure.
Clamp diameter
The following applies as a guideline: To determine the correct clamp diameter, push the hose onto the attaching material, (e.g. the nipple), and then measure the outer diameter of the hose. The value of the outer diameter must be slightly above the average value of the diameter range of the clamp to be selected. The listed size of the clamp denotes the inner diameter (id) of the clamp.
How to Install
These clamps can be easily installed using Oetiker Hand Installation Pincers (HIP). The HIP tools have been designed especially for pinching ear clamps quickly and easily.
Oetiker HIP Compound Action, Standard Jaw Pincer, Item No. 14100386
Oetiker HIP Compound Action Side Jaw Pincer, Item No. 14100387
Oetiker HIP Single Action Standard Jaw Pincer, Item No. 14100396
How to Remove
Ear clamps can be easily removed using Oetikers hand clamp cutter (HCC). The HCC tool is designed to safely remove ear clamps.
Oetiker Hand Clamp Cutter, Item No. 14100407
Please Note: The clamps included in this kit are not designed or intended for use in PEX applications. The sizing references for PEX clamps are not the same as standard Oetiker clamps. Oetiker PEX Clamps should be used for PEX applications.
5. Oetiker Stepless OET070170-300PCK Clamp Assortment Case, Single Ear Hose Clamps without Pincers, 1/4" - 11/16"
Feature
Genuine Oetiker Clamps - 50 each of 1/4" (7.0 mm), 13/32" (10.5 mm), 7/16" (11.3 mm), 1/2" (13.3 mm), 5/8"(15.7 mm) and 11/16" (17.0 mm)360 Stepless Design - no steps or gaps on inner circumference
Narrow band, concentrated seal compression
Specially formed strip edges reduce the risk of damage to the part being clamped
Lightweight design and Tampering is visible
Description
Included in the Kit:
50 of 7 mm Clamp, Part No. 16700001
50 of 10.5 mm Clamp, Part No. 16700006
50 of 11.3 mm Clamp, Part No. 16700007
50 of 13.3 mm Clamp, Part No. 16700010
50 of 15.7 mm Clamp, Part No. 16700016
50 of 17 mm Clamp, Part No. 16700017
Genuine Oetiker Clamps
Stainless Steel, Material no. 1.4301/UNS S30400
What is StepLess Technology?
Oetiker invented the StepLess ear clamp in 1979. The ear clamps special design eliminates steps and/or overlaps on the inner circumference of the clamp for a 360 leak-free seal. Because the tongue resides in a groove, the tongue-in-groove feature exerts pressure on the assembled parts over 360, enabling the clamp to apply a continuous radial force completely around the connections diameter.
Mechanical interlock
The interlock is a mechanical system for joining the clamp ends to permit closure. Some interlock designs can be opened for radial installation prior to closure.
Clamp diameter
The following applies as a guideline: To determine the correct clamp diameter, push the hose onto the attaching material, (e.g. the nipple), and then measure the outer diameter of the hose. The value of the outer diameter must be slightly above the average value of the diameter range of the clamp to be selected. The listed size of the clamp denotes the inner diameter (id) of the clamp.
How to Install
These clamps can be easily installed using Oetiker Hand Installation Pincers (HIP). The HIP tools have been designed especially for pinching ear clamps quickly and easily.
Oetiker HIP Compound Action, Standard Jaw Pincer, Item No. 14100386
Oetiker HIP Compound Action Side Jaw Pincer, Item No. 14100387
Oetiker HIP Single Action Standard Jaw Pincer, Item No. 14100396
How to Remove
Ear clamps can be easily removed using Oetikers hand clamp cutter (HCC). The HCC tool is designed to safely remove ear clamps.
Oetiker Hand Clamp Cutter, Item No. 14100407
Please Note: The clamps included in this kit are not designed or intended for use in PEX applications. The sizing references for PEX clamps are not the same as standard Oetiker clamps. Oetiker PEX Clamps should be used for PEX applications.
6. PEX Ear Clamp Removal Tool
Feature
FOR CLAMP REMOVAL ONLYQuick and easy ear clamp cutting
Requires minimal hand force
Safest method of clamp removal
Minimizes damage to application
Description
Oetiker Hand Clamp Cutter, Item No. 14100407
Ear clamps can be easily removed using Oetikers hand clamp cutter (HCC). The HCC tool is designed to safely remove ear clamps.
Specially designed: for removing Ear Clamps. The Hand Clamp Cutter HCC 2000 | 407 will cut the following Ear Clamps up to the band width and thicknesses listed.
Stainless Steel Band: cut clamps up to 7.0 mm wide x 0.8 mm band thickness.
Stainless Steel Band: cut clamps up to 9.0 mm wide x 0.6 mm band thickness.
Steel Band: cut clamps up to 9.0 mm wide x 0.8 mm band thickness.
7. Knipex Tools 10 99 i220 8.75" Ear Clamp Pliers
Feature
Suitable for Simple and reliable clamping of 1-ear and 2-ear Clamps without damaging the press pointsAn additional side jaw for easy clamping at Degree angle to ear clamp when space is limited
For Clamps on cv boots, coolant and fuel lines, air pressure systems, compressors
Durable and strong for long life
High-grade special tool steel; forged, oil-hardened
Description
Suitable for simple and reliable clamping of 1-ear and 2-ear clamps. With carded packaging.8. Oetiker 18500016 CV Joint Replacement Kit (ear elements small & large/perf. Bandsteel 7 mm)
Feature
Ear dimpled for increased clamp forceVisible deformation of ear for evidence of proper closure
Perforated band for creating clamps with various diameters and widths
Stainless steel clamp and band for resisting scaling and corrosion
Description
This Oetiker 18500016 CV joint replacement kit contains both small and large ear elements for repairing CV joint clamps. The perforated band is suitable for creating clamps of various diameters and widths. The dimple or indentation on the ear increases the clamping force for a more secure hold, and the ear is visibly deformed when clamped correctly, providing assurance of proper closure. All elements in this kit are stainless steel for resisting scaling and corrosion. This clamp kit is suitable for repairing portions of an ear clamp that is used for clamping the rubber boots that fit over CV (constant velocity) joints in automotive applications. Ear clamps are suitable for attaching a variety of hoses to fittings or other devices in various industrial applications, such as heavy machinery, hydraulics, irrigation, food processing, automobile manufacturing, and petroleum industries, among others. Hose clamps attach tubing and hoses to fittings to prevent flow leakage, or are used for hose or wire mounting applications. They come in a variety of designs to distribute uniform pressure over the circumference of hoses to bind them to fittings. Other hose clamp types are used for mounting, strapping, clamping, and positioning hose or wire. Hose clamps are suitable for a large number of industries, and commonly used in industrial, electronic, and automotive applications. Oetiker manufactures hose clamps, rings, couplings, conveyor chains, hinged belts, and other connecting parts and accessories. The company, founded in 1942 and headquartered in Horgen, Switzerland, meets International Organization for Standardization/Technical Specification (ISO/TS) standard 16949. What's in the Box? 5 174 Series small diameter ear element 5 174 Series large diameter ear element 1 10ft/3.3m x 7mm coil of perforated bandsteel Instructions9. Oetiker 16700010 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 10.8 mm (Closed) - 13.3 mm (Open) (Pack of 100)
Feature
Clamp ear is dimpled for increased clamp forceVisible deformation of ear for evidence of proper closure
Mechanical interlock for secure closure and better corrosion resistance than a spot-weld
Stainless steel for resisting scaling and corrosion
Description
This Oetiker 167 Series stainless steel Stepless one-ear hose clamp is for clamping hoses. The dimple or indentation on the ear of the clamp increases the clamping force for a more secure hold, and the mechanical interlock of this clamp keeps it securely closed and provides better corrosion resistance than a spot-weld, which is vulnerable to corrosion. The ear is visibly deformed when clamped correctly, providing assurance of proper closure. It's also made of stainless steel for resisting scaling and corrosion. This clamp is suitable for attaching hoses to fittings or other devices for applications such as food processing and commercial fishing that involve exposure to corrosive elements, particularly salt water.
Hose clamps attach tubing and hoses to fittings to prevent flow leakage, or are used for hose or wire mounting applications. They come in a variety of designs to distribute uniform pressure over the circumference of hoses to bind them to fittings. Other hose clamp types are used for mounting, strapping, clamping, and positioning hose or wire. Hose clamps are suitable for a large number of industries, and commonly used in industrial, electronic, and automotive applications.
Oetiker manufactures hose clamps, rings, couplings, conveyor chains, hinged belts, and other connecting parts and accessories. The company, founded in 1942 and headquartered in Horgen, Switzerland, meets International Organization for Standardization/Technical Specification (ISO/TS) standard 16949.
10. Oetiker 10100024 Zinc-Plated Steel Hose Clamp, Double Ear, Clamp ID Range 15 mm (Closed) - 18 mm (Open) (Pack of 25)
Feature
Genuine oetiker clampsTwo ears for nearly double the clamping range of one-ear clamps
Applies uniform force for secure clamping
Accommodates thermal and vibrational expansion for a surer hold than other clamp types
Lightweight design and tampering is visible
Description
Genuine Oetiker 2-Ear ClampsThe ears of these clamps do not have a dimple and nearly double the clamping range, compared to the 1-ear clamp. 2 ears provide a degree of elasticity to accommodate changes in size of the parts being joined, such as that which may be caused by thermal expansion or vibration.
Clamp diameter
The following applies as a guideline: To determine the correct clamp diameter, push the hose onto the attaching material, (e.g. the nipple), and then measure the outer diameter of the hose. The value of the outer diameter must be slightly above the average value of the diameter range of the clamp to be selected. The listed size of the clamp denotes the inner diameter (id) of the clamp.How to Install
These clamps can be easily installed using Oetiker Hand Installation Pincers (HIP). The HIP tools have been designed especially for pinching ear clamps quickly and easily.
Oetiker HIP Compound Action, Standard Jaw Pincer, Item No. 14100386
Oetiker HIP Compound Action Side Jaw Pincer, Item No. 14100387
Oetiker HIP Single Action Standard Jaw Pincer, Item No. 14100396
How to Remove
Ear clamps can be easily removed using Oetikers hand clamp cutter (HCC). The HCC tool is designed to safely remove ear clamps.
Oetiker Hand Clamp Cutter, Item No. 14100407
Please Note: The clamps included in this kit are not designed or intended for use in PEX applications. The sizing references for PEX clamps are not the same as standard Oetiker clamps. Oetiker PEX Clamps should be used for PEX applications.
Recent Comments