Top 10 best lamp xlr: Which is the best one in 2018?

When you want to find lamp xlr, you may need to consider between many choices. Finding the best lamp xlr is not an easy task. In this post, we create a very short list about top 10 the best lamp xlr for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 lamp xlr:

Product	Features	Editor's score	Go to site
	Nilight Led Light Bar 2PCS 18w 4" Flood Driving Fog Light Off Road Lights Boat Lights driving lights Led Work Light SUV Jeep Lamp,2 years Warranty		Go to amazon.com
	Flexible 0.5W LED Gooseneck XLR Console Light 12 volts 18 inches LED Console Lamp for Mixers (3pin 12V XLR)		Go to amazon.com
	Littlite 18X-HI-4 18 Inch Gooseneck lamp for use with 4-pin XLR connector		Go to amazon.com
	27.17 inches Gooseneck XLR 3-Pin Light 12 volts LED Console Lamp for Musical Console Mixer 1.5W Light		Go to amazon.com
	Littlite 18X-HI 18 inch High Intensity Gooseneck Lamp with 3-Pin XLR Connector		Go to amazon.com
	Littlite L-18X-LED 18" Gooseneck Light with 3 Pin XLR Connector LED Lamp		Go to amazon.com
	Behringer 12X-HI4 High Intensity 5-Watt Halogen 12" Gooseneck Lamp with 4-pin XLR Connector for X32 Digital Mixer		Go to amazon.com
	FidgetGear 2.4G ISM DMX512 Wireless Female XLR Receiver LED Stage Lighting PAR Lamp O0P1		Go to amazon.com
	Hella 980740011 Sea Hawk XLR LED Flood Lamp		Go to amazon.com
	Zerone 10FT 3 Pin XLR Connector Female to 1/8" 3.5mm male Stereo Jack Microphone Audio Cord Cable Stereo Mini Jack AUX Cord Audio Cable - 10 Feet		Go to amazon.com

Related posts:

1. Nilight Led Light Bar 2PCS 18w 4" Flood Driving Fog Light Off Road Lights Boat Lights driving lights Led Work Light SUV Jeep Lamp,2 years Warranty

Feature

SUPER BRIGHT AND WIDE ILLUMINATION RANGE: Advanced LED chips give out bright and white ray for clear visibility. Special designed lamp cup leads to wider illumination range, allowing you to see the left and right clearly.
BETTER HEAT DISSIPATION: Quick cooling aluminum alloy heat sinks and high-quality heat conduction silicone gel can effectively extend the lifespan of the light bar to over 30,000 hours.
HIGH PROTECTIVE PERFORMANCE: IP67 Waterproof Rate, waterproof up to 1 meter of water for 30 minutes and effectively dustproof. The stainless mounting brackets are rustproof and anticorrosive.
ADJUSTABLE MOUNTING BRACKET: With adjustable mounting bracket, the work light can adjust to about 45 degrees, which makes changing direction easier..WIDESPREAD USES: The light bar can be compatible with almost all Jeeps, 4x4, Trucks, Motorcycles, SUVs, ATVs, Cars, Boats, etc. Many indoor and outdoor uses: Garden Lighting, Backyard Lighting, Back-up Light, Off Road Lighting, Construction Lighting and so on.
Working Temperature: -40~85 degrees Celsius

Description

Specification:
LED Power: 18W (6 x 3W High Intensity LED)
Beam Pattern: Flood Beam; Lumen: 1260LM
Input Voltage: 9-30V DC (fits 12V, 24V vehicles)
Working Lifespan: Over 30,000 hours
Working Temperature: -40~85 degrees Celsius
LED Color Temperature: Pure White 6000K-6500K
Material: 6063 Aluminum Profile, High quality Led Chips, PC Lens
Waterproof Rate: IP67; Waterproof, dustproof, quakeproof and anti-corrosive.
Certifications: CE, FCC and RoHS
Applications:
Off Road Lighting: Back Up Light, Jeeps, 4x4, Cars, Motorcycles, ATV, UTV, SUV, Truck, Trailer, Forklift, Trains, Boat, Bus, Road Buggy, Sand Rail, etc.
Other Lighting: Excavator, Dozer, Road Roller, Crane, Tractor, Harvester, Grain Drill, Mower, Snowplow, Fire engine, Rescue Vehicle, Camping, Mining, Construction Lighting, etc.
Household Lighting: Garden, Backyard, Garage, Indoor Lighting. (Note: Use a voltage transformer/converter to convert the AC 110-120V to DC 12V for indoor use.)
Note:
They are aftermarket parts. NOT D.O.T. approved. Do not use if D.O.T. is required. For off road use only.
Before installing this product, please check your state/provincial and local/municipal laws and regulations.

They are aftermarket parts. NOT D.O.T. approved. Do not use if D.O.T. is required. For off road use only.
Laws concerning this product vary from state/province to state/province.
Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only.

In some states/provinces off-road uses are also prohibited.
The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law.
Before installing this product, please check your state/provincial and local/municipal laws and regulations.

2. Flexible 0.5W LED Gooseneck XLR Console Light 12 volts 18 inches LED Console Lamp for Mixers (3pin 12V XLR)

Feature

Dedicated 12 Volt Flexible Gooseneck LED Light for Mixing Consoles / Mixers
High efficiency more light for less energy
Connector : 3 Pin XLR (12 +) / 4 Pin XLR (34 +) / BNC (12-Volt) / USB (12-Volt)
NOTE : This led lamp works ONLY on Specific 12-Volt Task Light Socket, please make sure your equipment has one before purchase
Length : approx. 18 inches / 45 cm

Description

Specifications:
Input DC 12V
Length approx. 18 inches (45cm)

Notice Before Purchase
Read the manual of your mixer device and check the data sheet.
Then choose what you need according to the positive and negative pole of our LED light needles.
If the LED light cannot match the corresponding needle of your equipment, please don't make purchase, because you will need to re-welding it by yourself which requires professional technology knowledge.

In this case, we recommend our New Arrival Product : Automatic Series - Automatically adjust the voltage(5.5V-16V), distinguish between positive and negative pole, Suitable for most of Musical Console Mixer.
-Rejea 5.5V-16V Voltage Automatically Adjustable LED Console Lamp
Note: This lamp will not work on Normal 3 Pin XLR/ 4 Pin XLR/ BNC connectors( because of Volt issue), make sure your mixing console has the Specific 12-Volt Task Light Connector for this led lamp.

Q: How does this lamp work?
A: Consoles require a dedicated 12-volt task light connector for use of this lamp. So this lamp will not operate on a phantom powered mic input. Because the standard for phantom power is +48 volts applied to BOTH sides of the audio signal pair through two resistors, with the V- connected to ground and shield, too high for efficiently driving LED.
Durable & long-lasting LEDs, High efficiency more light for less energy.

Cool operating temperatures adjust without burning your fingers.



Have tested with following models

4 Pin XLR
Behringer X32
Midas M32

BNC connector
Crest 12M

SOUNDKING AS3208, MIX32AU
Peavey CD MIX 7032A VENUE SC48, Screen Pro2,
Mackie Onyx 24.4 console

USB
Soundcraft Si Impact

3. Littlite 18X-HI-4 18 Inch Gooseneck lamp for use with 4-pin XLR connector

Feature

High-intensity 18" gooseneck light
4-pin XLR connector

Description

Littlite 18X-HI-4 high-intensity 18" gooseneck light with 4-pin XLR connector.

4. 27.17 inches Gooseneck XLR 3-Pin Light 12 volts LED Console Lamp for Musical Console Mixer 1.5W Light

5. Littlite 18X-HI 18 inch High Intensity Gooseneck Lamp with 3-Pin XLR Connector

Feature

.

Description

Gooseneck lamp for use with XLR connector. 3-pin configuration. Operates on 12 volts AC or DC. Durable metal construction. Fits many mixers straight.

6. Littlite L-18X-LED 18" Gooseneck Light with 3 Pin XLR Connector LED Lamp

Feature

Gooseneck lamp with 3-pin XLR for connecting to console
Provides white light with low heat
The light is a low-heat, long-lasting solution for your mixing console
The Littlite X-LED is a gooseneck light with 3-pin XLR connector that provides a white light via its LED lamp

Description

The X-LED XLR gooseneck light features a white LED lamp and 3-pin XLR connector for attaching to your console. The Littlite X-LED is a gooseneck light with 3-pin XLR connector that provides a white light via its LED lamp. The light is a low-heat, long-lasting solution for your mixing console.

7. Behringer 12X-HI4 High Intensity 5-Watt Halogen 12" Gooseneck Lamp with 4-pin XLR Connector for X32 Digital Mixer

Feature

12-inch
4-pin configuration
Gooseneck lamp
XLR connector

Description

Gooseneck lamp for use with XLR connector. 4-pin configuration. 12 inch.

8. FidgetGear 2.4G ISM DMX512 Wireless Female XLR Receiver LED Stage Lighting PAR Lamp O0P1

Description

Specification:

2.4G wireless DMX512 R/T

Input voltage: 5VDC 500mA MIN

Receive Sensitivity: -94dBm

Max transmitting power rate: 20dBm

DMX connector: 3pin female

Communication distance: 400M ( visible distance )

Work frequency section: 2.4G ISM, 126 channels.frequency section

Plug standard: UK plug

Material: kirsite + plastic

Item size: 8 * 2.5 * 2.5cm/3.14 * 0.98 * 0.98in ( L * W * H )

Cable length: 177cm/5.8ft

Item weight: 45g/1.59oz

Package size:14.5 * 10.5 * 4.5cm/5.7 * 4.13 * 1.77in ( L * W * H )

Package weight: 142g / 5 oz

Operating manual

ID code and LED color corresponding relationship

1: RED

2: GREEN

3: RED+GREEN

4: BLUE

5: RED+BLUE

6: GREEN+BLUE

7: RED+GREEN+BLUE

1) Press momentary switch above the side led indicator to indicate ID setting.

2) Press again to set IC, to the color ID desired, adding 1 each time you press the switch will advance the color IDcode.

3) Working condition:

LED constant lit up: No DMX or wireless signal.

Red LED flash: Transmitting.

Green LED flash: Receiving

4) RF frequency 2.400 - 2.525G, total 126 channels, it's searching automatically.

5) ID Code "1-7" groups ID code, press 'KEY' for setting, it only can work under same ID code of transmitter and receiver. ( Same LED Color )

Package list:

1 * DMX Wireless Receiver unit

1 * Power Adapter

1 * Specification ( English )

9. Hella 980740011 Sea Hawk XLR LED Flood Lamp

Feature

Wireless NONE; Bulb Watts NONE; Bulb Type NONE; Amps - Draw NONE
Waterproof NONE
Voltage - Input Range (Volts) NONE
Candle Power NONE
Candela NONE

Description

Sea Hawk-R LED Floodlight/Spread light,Bracket Mount, with White Housing, MFG# 980740011, Hi-impact plastic housing and precision optics. 1300 Lumens, 12/24VDC. 18W power consumption. 5 year warranty.

10. Zerone 10FT 3 Pin XLR Connector Female to 1/8" 3.5mm male Stereo Jack Microphone Audio Cord Cable Stereo Mini Jack AUX Cord Audio Cable - 10 Feet

Feature

XLR Connector:Unbalanced XLR to 3.5mm Cable, It's Ideal for Connecting an XLR Microphone to the 3.5mm Mini Input of a Digital Camcorder, DSLR Camera, or Computer Sound Card.(Note: Microphone Must Be Separately Powered)
Sturdy Metal Connectors:Have Gold-Plated Contacts to Reduce Oxidation and Reinforcing Screws on the XLR Connector to Maintain Cable Integrity.4N Oxygen-Free Copper(OFC) Core to Deliver Pristine Sound.
3.5mm Microphone Cord:Combines 3.5mm Left and Right Channels into XLR Single Mono Feed,Connects a Stereo Mic With a Single XLR to Headphone Jack, or an Audio Device With Heardphone Jack to XLR.
Oxygen-Free Copper:Conductor for Enhanced Signal Clarity,Provide Pure Sound That is Noise Free.
OFC Spiral Shield:for Effective EMI and RFI Rejection and Flexibility.

Description

Description:
This cable is designed to connect a stereo microphone with a single XLR output to a mini stereo phone input. It is ideal for connecting a shotgun mic to a DV camera. Great for connecting iPhone, iPad, or any 3.5mm audio output to a powered speaker.


Specifications:
Color: Black
Cable Length: 3M / 10 Feet
Connectors: Stereo 3-pin XLR female to 1/8" male


Package included:
1 x Microphone Cable

Conclusion

By our suggestions above, we hope that you can found the best lamp xlr for you. Please don't forget to share your experience by comment in this post. Thank you!