We spent many hours on research to finding powered mixer and speakers, reading product features, product specifications for this guide. For those of you who wish to the best powered mixer and speakers, you should not miss this article. powered mixer and speakers coming in a variety of types but also different price range. The following is the top 10 powered mixer and speakers by our suggestions:

Product	Features	Editor's score	Go to site
	Alto Professional Trouper | 200W Bi-Amplified Bluetooth PA System with 3-Channel Mixer		Go to amazon.com
	Alto Professional TS215 | 15" 2-Way Powered Loudspeaker with Integrated Mixer (1100W Peak / 550W Continuous)		Go to amazon.com
	Rockville RPM85 2400w Powered 8 Channel Mixer, USB, 5 Band EQ, Effects/Bluetooth		Go to amazon.com
	Wireless Bluetooth Power Amplifier System - 2X40W Mini Dual Channel Mixer Sound Audio Stereo Receiver w/ USB, AUX, MIC IN - For Speaker, PA, Home Theater via RCA, Studio Use - Pyle PTA22BT		Go to amazon.com
	Rockville RPM870 8 Channel 6000w Powered Mixer w/USB, Effects+Peavey XLR Cable		Go to amazon.com
	(2) JBL Pro JRX215 15" 2000w PA/DJ Speakers+Powered 6-Channel Mixer w/USB+Stands		Go to amazon.com
	Rockville RPM45 2400w Powered 4 Channel Mixer, USB, 3 Band EQ, Effects, Phantom		Go to amazon.com
	Rockville GB1 Portable Powered PA System W/Mixer+Speakers+Stands+Mic DJ Package		Go to amazon.com
	ASC Pro Audio DJ 15 Foot Mic Microphone Mixer Powered Speaker Male to Female Patch XLR Cable		Go to amazon.com
	800 Watt Powered Bluetooth Speaker - PA Dual System Disco Jam, Two-Way DJ Speakers karaoke machine , USB/SD Card Readers, FM Radio, 3.5 mm AUX Input Active & Passive Speakers - Pyle PSUFM837BT		Go to amazon.com

Related posts:

1. Alto Professional Trouper | 200W Bi-Amplified Bluetooth PA System with 3-Channel Mixer

Feature

Compact high-performance PA system with 3-channel mixer for small venue performances and home studio listening
Lightweight (23 lbs) with built-in rear handle, rubber feet and pole socket for easy transport and setup
Wireless Bluetooth connection with up to two linked units for stereo and XLR link output for additional loudspeakers and subwoofers
Integrated 3-channel audio mixer with volume and 2-band (LF/HF) EQ on each channel
Two-way 200-watt bi-amplified system with three 6.5" woofers and a 1" high frequency driver

Description

Alto Professionals Trouper is a compact high-performance PA system that fulfills the unique demands of solo artists and small ensembles.

The Trouper leverages technology from our widely-acclaimed Truesonic and Black Series sound reinforcement systems to be the best-sounding and most full-featured small-venue PA system available.

When you have more space, the XLR output connects with additional loudspeakers and subwoofers, and Troupers wireless Bluetooth capability supports using up to two linked units for stereo backing tracks or background music.

Two XLR+1/4-inch combo inputs, a stereo RCA input and 1/8-inch input can accommodate microphones, instruments, DJ mixers, controllers and more. An integrated audio mixer on the back panel enables volume and low frequency/high frequency EQ control on each of the three channels.

Trouper is a 2-way 200-watt bi-amplified system (130 watts LF/70 watts HF) with three 6.5 woofers and a 1 high-frequency compression driver, spanning the full musical frequency range from 65 to 20,000 Hz.

The system has thermal and dynamic overload protection, so the sound is always clean and clear no matter how hard you push it.

Frequently Asked Questions

How powerful is the Alto Pro Trouper?

The Alto Pro Trouper sounds like a monster stack at 200W of peak power and 100W of continuous Class D amplification. The maximum SPL rating is 117 dB-SPL @ 1 meter (continuous, and 120 dB-SPL @ 1 meter (peak). The system also has thermal and dynamic overload protection, so the sound is always clean and clear no matter how hard you push it.

How do I pair my Bluetooth device to the Alto Pro Trouper?

1. Press and release the Trouper loudspeaker'sPAIRbutton. The LED will flash, and you will hear a tone sequence.
2. From your Bluetooth device's settings page,enable Bluetoothand selectAlto Pro Wirelessas the device.
3. When paired successfully, you will hear a final "confirmation tone" from the loudspeaker and thePAIR LEDwill light continuously.
   
   Note:The first time you do this, the process may take up to 60 seconds. Also, if your device prompts you to enter a PIN code to pair, enter0000(four zeros). If your device prompts you to select the connection type, selectstereo speakers,advanced audio, or a similar option.

How far can the Bluetooth connection go?

Trouperloudspeaker systems use an advanced, extended-range Bluetooth antenna design, allowing for ranges far greater than traditional Bluetooth devices. The typical range is 60-80 feet (18-24 meters) with a clear line of sight. However, the range may vary depending on your source device and the environment.

I'm playing music from my Bluetooth device. Why can I only hear the left side?

The Trouper speakers are designed to playback in mono, even when sending it a stereo audio signal via Bluetooth.Instead of summing, or combining,the two sides of your stereo signal, the speaker will simply default to the left side of the signal. When a second speaker is linked, this will then be sent the right side, giving you a full stereo sound.

If you are only planning on using one speaker at a time, you can configure your device to playback in mono so you can still hear both the left and right sides.

How many Alto Pro loudspeakers can I link together?

You can link multiple Trouper loudspeakers in two different ways:using XLR cablesorWireless Linking.

1. Using physical XLR connection cables, you can connect as many Alto Pro Trouper loudspeakers together as you like!
   
   Each Alto Pro Trouper loudspeaker contains aLink Outputconnection on the rear of the speaker. This connection uses a standard XLR cable (not included) to connect to another loudspeaker and the signal sent from this connection is a summed mono signal of all three rear inputs, post-Input Volume.
2. Wireless Linking: First, follow thesteps to Pair a single Trouper to your Bluetooth device. This will set that first speaker as the "Master" and once the second speaker is linked, the second speaker will become the "Slave". The Bluetooth device will send the signal to the Master loudspeaker, which will then relay the signal to the Slave loudspeaker.

To link a second Alto Pro Trouper loudspeaker wirelessly, follow the steps suggested below:

1. Make sure no audio is playing from your Bluetooth device. If it is, pause/stop play back and wait 5 seconds.
2. Press and release the Stereo Link button on each loudspeaker.
3. Both loudspeakers' LEDs will flash while "searching" for each other, and you will hear atone sequence from both loudspeakers. (This process may take up to 60 seconds. However, the very first time you link the loudspeakers, the process may take up to 3minutes.)
4. When they are successfully linked, you will hear a final "confirmation tone" from bothloudspeakers and the Stereo Link LEDs on both loudspeakers will light continuously.
   
   Note:The stereo signal will be split between the two loudspeakers: the master loudspeaker will play the left channel; the slave loudspeaker will play the right channel.
   
   Tip:When using two loudspeakers, we recommend labeling the master loudspeaker so you can distinguish between the two in future setups.

Further Technical Support

Whether you are a customer or dealer, if you already own a Alto Professional product, or if you have pre-sales or parts questions, the Alto Professional technical support team is available to help!

Each product has a dedicated support page on the website where you can find manuals, specifications, software updates, and troubleshooting guides:www.altoproaudio.com

Visit the link below to connect with any of the following support options: online community support, phone support, email support.

• altoproaudio.com/support

Technical Specifications

• System Type: 2-way bi-amplified powered loudspeaker
• Power Amplifier: Bi-amplified; 200 W peak: 130 W LF + 70 W HF
• High-Frequency: 1 1 (25.4 mm) neodymium compression driver
• Low-Frequency: 3 6.5 (165 mm) with 1 (25.4 mm) voice coil
• Frequency Response: 65 Hz 20,000 Hz
• Crossover Frequency: 1.8 kHz, electronic
• Maximum SPL: 117 dB-SPL @ 1 m (continuous), 120 dB-SPL @ 1M (peak)
• Connections
  
  
  • (2) XLR-1/4 (6.35 mm) TRS combination inputs (Channels 1 & 2)
  • (1) 1/8 (3.5 mm) TRS/stereo input (Channel 3)
  • (1) RCA (line-level) stereo input pair (Channel 3)
  • (1) XLR link output
  • (1) IEC AC power connection
• Equalization: 2-band (LF, HF) for Channels 1 & 2
• Bluetooth: A2DP streaming audio with full stereo link when using 2 Trouper loudspeakers
• Protections: Thermal, overload
• Enclosure: Trapezoidal wood cabinet MDF enclosure with vinyl wrap; black metal protective corners; molded, ergonomically designed plastic handle; 4 rubber feet; 36 mm pole socket for stand mounting
• Power
  
  
  • AC Input: 100 V AC, 50/60 Hz (+10%) 110-120 V AC, 50/60 Hz (+10%) 220-240 V AC, 50/60 Hz (+10%)
  • Fuse: 100-120 V T1.6AL AC250V 220-240 V T800mAL AC250V
• Power Consumption: 150 W
• Dimensions(height x width x depth): 29.16 x 8.36 x 10.12
• Weight: 22.5 lbs

Box Contents

• Trouper
• Power Cable
• User Guide
• Safety & Warranty Manual

2. Alto Professional TS215 | 15" 2-Way Powered Loudspeaker with Integrated Mixer (1100W Peak / 550W Continuous)

Feature

New model of professional-grade 15-inch Truesonic loudspeaker for venues, events, gigs, and get-togethers
Re-engineered from ground up to enhance power output and sound clarity
Redesign improves durability, decreases weight, and adds handles for easier transport
Fanless, passive cooling - speaker runs cleaner, quieter and has greater long-term reliability
Maintains previous features such as built-in two-channel mixer, two XLR inputs and two 1/4" mic/line inputs

Description

In 2011, Alto Professional launched the Truesonic 1 series, which achieved wide acceptance around the worldfrom houses of worship to mobile entertainers to backyard patios. In the process, we established a new benchmark for loudspeakers.

With the TS2 series, we set that standard even higher.

This series consists of three models: the TS210, TS212 and TS215. We maintained the previous features that made them popular, but made them all significantly louder. Regardless of size, each model is 1100 watts peak, 550 watts continuous to have the power to fill larger rooms and maintain clarity without distortion.

The TS2 series has a more professional appearance. The trapezoidal frame, durable polypropylene cabinet, and perforated steel grille provide a quality of form to suit any venue and match the excellent acoustics you're already accustomed to.

We made them easier to transport. The TS215 is seven pounds lighter than its predecessor with five integrated handles, so it's comfortable to pick up and carry in any orientation. It also employs professional-grade M10 rigging/suspension points to securely install it wherever it would sound best.

Finally, our ground-up designed incorporates advanced amplifiers with superior heat-dissipation characteristics, eliminating the need for costly, noisy cooling fans. The result is a powered speaker system that runs cleaner, quieter, and has greater long-term reliability.

The Alto Professional TS215 is more powerful and better-looking, with greater portability and superior engineeringall without a jump in price.

Technical Specifications

• Output Power
  • 1100 W peak (700 LF + 400 HF)
  • 550 W continuous RMS (350 LF + 200 HF)
• Low Frequency: 15 woofer, 2 voice coil
• High Frequency: 1 neodymium driver
• Crossover: 2,000 Hz
• Maximum SPL: 129 dB peak, 126 dB continuous (dB-SPL @ 1 m)
• Frequency Response: 50 Hz 20,000 Hz (+ 3 dB)
• Frequency Range: 43 Hz 22,000 Hz (-10 dB)
• Coverage: 80/100 H x 60 V nominal
• Connectors
  • (2) 1/4 TRS or XLR inputs
  • (1) XLR link output
• Cabinet: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
• Controls: Volume, power on/off with LED, clip limiter with LED, ground lift
• Protection: Electronic clip, thermal and transducer overdrive protection
• Power
  • AC Input: 100120/220240 V, 50/60 Hz
  • Fuse: 100-120 V T6.3AL AC250V / 220-240 V T3.15AL AC250V
• Dimensions (width x depth x height): 15.60 x 14.04 x 25.68
• Weight: 32.72 lbs

Box Contents

• Truesonic TS215 Loudspeaker
• Power Cable
• User Guide
• Safety & Warranty Manual

3. Rockville RPM85 2400w Powered 8 Channel Mixer, USB, 5 Band EQ, Effects/Bluetooth

Feature

Rockville RPM85 2400w Powered 8 Channel Mixer, USB, 5 Band EQ, Effects/Bluetooth.
RMS Power Output:. .....300w x 2 @ 4 Ohm. .....225w x 2 @ 8 Ohm. .....600w x 1 @ 8 Ohm. Program Power Output:. .....600w x 2 @ 4 Ohm. .....450w x 2 @ 8 Ohm. .....1200w x 1 @ 8 Ohm. Peak Power Output:. .....1200w x 2 @ 4 Ohm. .....900w x 2 @ 8 Ohm. .....2400w x 1 @ 8 Ohm.
Individual Volume, Reverb, Bass, and Treble controls. Adjustable effects: volume, echo, and delay.
Built in bluetooth playback. USB Input. SD Input. MP3 Volume control. AUX volume control. Master volume control. Illuminated 5 band graphic equalizer. 5 segment LED power out display. 8 balanced XLR inputs. 8 1/4" TRS inputs.
1 RCA L/R AUX input. 1 RCA L/R Rec output. 1 1/4" Effect loop input/output. Dual 1/4" speaker outputs (accepts 4 ohm or 8 ohm speakers). 110/220V Switchable. +15V phantom power. Fan Vent Cooling System. Dimensions: 19" x 12" x 7.5". Weight: 25.4Lbs. Please refer the User Manual before use.

Description

The Rockville RPM85 is an 8 channel wood cabinet powered mixer with USB/SD input and LCD display. This mixer is one of the best sounding powered mixers on the market. This will compete with the most premium brands on the market in terms of sound quality and how much power this has. I personally tested our RPM series of powered mixers and I was completely blown away! I ran this to (2) Yamaha speakers and even with the volume turned up half way these were insanely loud! When I cranked the volume to 90 % the clarity was just un-believable. The power amp built into this mixer is 225 x 2 RMS @ 8 ohms and 300 x 2 RMS @ 4 ohms. We rate the RMS very strictly the way famous brands like Mackie rate their items. We also supply you with program and peak ratings but RMS is the true continuous output power.

This powered mixer is rugged and tough! It is enclosed in a high quality wooden enclosure which can take a real beating! This model has 8 channels making it versatile enough for most parties and gigs. It has adjustable delay and echo effects, along with individual controls on each channel for reverb, bass, and treble.

We added built in bluetooth, USB, and SD players giving you a lot of playback options.

Features:

Rockville RPM85 2400w Powered 8 Channel Mixer, USB, 5 Band EQ, Effects/Bluetooth
RMS Power Output:
.....300w x 2 @ 4 Ohm
.....225w x 2 @ 8 Ohm
.....600w x 1 @ 8 Ohm
Program Power Output:
.....600w x 2 @ 4 Ohm
.....450w x 2 @ 8 Ohm
.....1200w x 1 @ 8 Ohm
Peak Power Output:
.....1200w x 2 @ 4 Ohm
.....900w x 2 @ 8 Ohm
.....2400w x 1 @ 8 Ohm
Individual Volume, Reverb, Bass, and Treble controls
Adjustable effects: volume, echo, and delay
Built in bluetooth playback
USB Input
SD Input
MP3 Volume control
AUX volume control
Master volume control
Illuminated 5 band graphic equalizer
5 segment LED power out display
Dimensions: 19 x 12 x 7.5
Weight: 25.4Lbs.

4. Wireless Bluetooth Power Amplifier System - 2X40W Mini Dual Channel Mixer Sound Audio Stereo Receiver w/ USB, AUX, MIC IN - For Speaker, PA, Home Theater via RCA, Studio Use - Pyle PTA22BT

Feature

2X40 WATT POWER: The Pyle Dual Channel Stereo Amplifier is perfect for your PA and home theater acoustic sound system. Gives you 2x40 watts power which can be used for multi speakers w/ 4 ohm impedance, enjoy high quality amplified audio
7 INPUTS: This personal digital amp box supports various external sources - 3 RCA audio input for tuner, CD player, tape deck, camcorder or VCR, 1/4" microphone IN, 1/4" headphone jack, USB, AUX IN. Also features a REC output for recording
BLUETOOTH CONNECTIVITY: The sound amplifying mixer device is equipped w/ Bluetooth wireless music streaming. Works w/ today's latest devices including smart phones, tablets, iPhone and computer w/ hassle-free receiver pairing
PAGER/MIXING MODE: The mini integrated indoor AV receiver features pager and mixing switch. In pager mode, the signal from the microphone will override to auto talkover, use for hosting and meetings. Switch to mixing mode for a fun karaoke session
EQ CONTROLS: The improved professional compact bookshelf sound amplifier features crisp and responsive button for power, BT switch and rotary knob controls for mic volume, balance, bass / treble, master volume, and input source

Description

PyleHome Model : PTA22BT

Bluetooth Stereo Power Amplifier

Bluetooth Mini Blue Series Stereo Power Amplifier, 2 x 40 Watt, Pager & Mixing/Karaoke Functions, Microphone Input, USB Charge Port, RCA and AUX (3.5mm) Input Connector Jacks

Features:

Compact and Powerful Mini Amp System

Built-in Bluetooth for Wireless Audio Streaming

Compatible with All Your Favorite Bluetooth Devices

(Works with iPhone, Android, Smartphone, iPad, Tablet, PC, etc.)

USB Charge Port for Device Charging

Switchable Mic Pager and Mixing/Karaoke Modes

Page Mode: Allows Voice Transmission via Mic

Mix Mode: Allows Both ,Voice & Music Transmission

RCA Audio Input (AUX 1, AUX 2, CD)

AUX (3.5mm) Input Connector Jack

(Connect Devices like Smartphones, Tablets, MP3 Players, etc.)

Treble, Bass, Balance, Master Volume Adjustable

Four Push Type Speaker L/R Terminals

Input Selector Switch

RCA Record Output

1/4'' Headphone Output

1/4 Mic Input Jack

Built-in Short Circuit and Power Surge Protection

Compatible with Audio/Computerized Devices

Rotary Master & Microphone Volume Controls

Front Facing Control Panel

LED Indicator Lights

Technical Specs:

Peak Power Output: 40 Watt x 2

10% RMS at 4-Ohm Impedance

Signal-to-Noise Ratio: 75dB

Frequency Response: 20Hz - 20kHz

Input Sensitivity: 150mV

T.H.D.: 0.3%

Bass/Treble: +/-10dB

110V/220 Voltage Selector, 50/60Hz

Dimension (W x H x D): 7.48'' x 2.87'' x 5.31''

The Pyle Mini Blue Series (PTA22BT) mini stereo power amplifier provides up to 40 watts x 2 at 4 Ohms. Built-in Bluetooth technology allows you to instantly stream wireless audio from your favorite devices -- quickly and easily. This power amplifier also features a microphone input with mic pager and mixer mode capabilities. Connect external devices using the RCA (L/R) or AUX (3.5mm) stereo input connector jacks, let the music play, then take advantage of the mixer mode and enjoy karaoke ability. Also features four push-type speaker terminals. It's compatible with virtually any audio or computerized device (works with iPhones, Androids, Smartphones, iPods, MP3 Players, iPads, Tablets, etc.). Additional features include USB charging port, built-in short circuit and power surge protection, headphone jack, rotary master volume control and more. Enjoy compact and powerful wireless amplifier music streaming ability with the Pyle Mini Blue Series Bluetooth Amp.

5. Rockville RPM870 8 Channel 6000w Powered Mixer w/USB, Effects+Peavey XLR Cable

Feature

Package Includes: Rockville RPM870 8 Channel 6000 Watt Powered Mixer with USB, Effects, and 8 XDR2 Mic Pre's + Peavey PV 20' XLR Female to Male Low Z Mic Cable - 100% Copper
Rockville RPM870 8 Channel 6000w Powered Mixer, 7 Band EQ, 24-Bit Effects, USB, 48V Phantom Power. RMS Power Output: . .....750w x 2 @ 4 Ohm. .....500w x 2 @ 8 Ohm. Program Power Output: . .....1500w x 2 @ 4 Ohm. .....1000w x 2 @ 8 Ohm. Peak Power Output: . .....3000w x 2 @ 4 Ohm. .....2000w x 2 @ 8 Ohm. 8 Channel mixer section: 6 mono channels, 1 stereo channel. 8 high-quality XDR2 mic preamps with switchable +48 V phantom power for condenser microphones.
XDR2 mic preamps are low-noise and low distortion. These are some of the best sounding mic pre's on the market. 1 dedicated USB input to play back music or record the main mix. USB supported formats are MP3, WAV, WMA. Built in bluetooth wireless audio streaming. 24 BIT digital effects processor with 16 preset digital effects including (reverb, chorus,, delay, chorus, phaser, flanger and various multi-effects). Effects level control can adjust signal level of each effect. Effects mute button.
FX footswitch input lets you turn your effects on or off . 4-Band EQ (high, high-mid, low-mid, low) per channel. Each channel is equipped with pad, must, and solo buttons with LED's. Each channel has gain, aux control, FX control, Pan control, Volume control. Peak LED indicator has a red LED that indicates a signal level that is 5dB below clipping . Dual Stereo 7-band Graphic EQ allows for precise frequency correction of monitor and main outputs (with EQ kill switch).
Peavey PV 20' XLR Female to Male Low Z Mic Cable - 100 % Copper/Top Quality. High-quality XLR connectors with nickel contacts. High density shield for maximum flexibility and noise prevention. 24 awg. twisted pair, shielded cable. 20 foot length. Weight Unpacked: 0.75 lb(0.34 kg). Weight Packed: 0.75 lb(0.34 kg). Width Packed: 3"(7.62 cm). Height Packed: 13"(33.02 cm). Depth Packed: 0.75"(1.905 cm).

Description

Features:

Rockville RPM870 8 Channel 6000w Powered Mixer, 7 Band EQ, 24-Bit Effects, USB, 48V Phantom Power
Aux send and Aux returns on every channel to connect all types of external effects and processors
You can control your monitor mix and check levels through your headphones
Limit L and Limit R LED indicators. These limiters are designed to go brighter as clipping gets stronger and will remain lit up until the channels stop clipping. We recommend lowering the gain if you see these LED's lit up
Power and Output level LED indicators
Main output fader allows you to fade the sound between the left and right channel
RCA input, RCA output, and USB player
Headphone jack for monitoring the master signal and individually monitoring each channel with PFL, L/R
Gain control adjusts he sensitivity from -60dB to -20dB when the pad button is in the out position.
When the pad button is pressed in the gain will adjust from 240dB to 0dB
Solo button allows you to hear the signals through your headphones or to the control room without having to route them to the main mix. This works even with the fader turned down. You can use this to preview channels before they are let into the mix or just to check out a channel during a live performance. You can solo as many channels at a time as you want
Built in cooling fan and ventilation system
USB input supports unlimited capacity (as many GB as you want)
110/220V switchable power supply
Dimensions: (L*W*H) 15.16" x 17.72" x 7.09" inches / 38.5 x 45 x 18 cm
Weight: 23.06Lbs. (10.46kg
Peavey PV 20' XLR Female to Male Low Z Mic Cable - 100 % Copper/Top Quality

6. (2) JBL Pro JRX215 15" 2000w PA/DJ Speakers+Powered 6-Channel Mixer w/USB+Stands

Feature

Package Includes : (2) JBL JRX215 2,000 Watt 15" Passive 2-Way DJ P/A Speakers With a 15" LF Driver and 1" HF Compression + Rockville RPM870 8 Channel 6000 Watt Powered Mixer with USB, Effects, 8 XDR2 Mic Pre's and Bluetooth + Pair of Rockville RVSS2-TSNL4 Heavy Duty Adjustable Pro PA Speaker Stands + (2)1/4" to SpeakOn NL-4 Cables + Carrying Case
JRX215 15" Two-Way Sound Reinforcement Loudspeaker System. JBL 15 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil. JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver. Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide.
19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance.. Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10.
Rockville RPM870 8 Channel 6000w Powered Mixer, 7 Band EQ, 24-Bit Effects, USB, 48V Phantom Power. RMS Power Output: .....750w x 2 @ 4 Ohm. .....500w x 2 @ 8 Ohm. Program Power Output: .....1500w x 2 @ 4 Ohm. .....1000w x 2 @ 8 Ohm. Peak Power Output: .....3000w x 2 @ 4 Ohm. .....2000w x 2 @ 8 Ohm. 8 Channel mixer section: 6 mono channels, 1 stereo channel. 8 high-quality XDR2 mic preamps with switchable +48 V phantom power for condenser microphones.
Pair of Rockville Tripod Speaker/Lighting Stands+(2) 20 Foot 1/4"-SpeakOn Cables. Adjustable Height. Steel Construction. Black Color. Weight capacity: 100 LBS . Adjustable Height Range: 47.25-78.75 inches. Base spread: 15-40 inches. Tube Diameter: 1.5 - 1.37 inch . Leg Diameter: 1.37 inche. Includes (2) 20 foot 1/4" to Speakon NL-4 speakercables. Includes (1) Carry Bag.

Description

Features of JRX215: Details: Power Rating : 250 W / 1000W. Frequency Range (-10 dB) : 41 Hz - 18 kHz. Frequency Response (3 dB) : 59 Hz - 13 kHz. Sensitivity (1w/1m) : 99 dB SPL. Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL: 129 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.2 kHz. Dimensions (H x W x D) : 699 mm x 460 mm x 432 mm (27.5 in x 18.1 in x 17 in). Weight : 27.4 kg (60.5 lb). High Frequency Driver : JBL 2414H-C , 1" exit compression driver mounted on Progressive TransitionWave guide. Low Frequency Driver : JBL M115-8A. Input Connectors : Parallel Neutrik Speakon NL-4 (x1); .25in TS phone jack (x1). Grille : 18-gauge, powder-coated steel. Mounting & Suspension : 36 mm, dual-angle pole-mount socket.

Features of RPM870: XDR2 mic preamps are low-noise and low distortion. These are some of the best sounding mic pre's on the market. 1 dedicated USB input to play back music or record the main mix. USB supported formats are MP3, WAV, WMA. Built in bluetooth wireless audio streaming . 24 BIT digital effects processor with 16 preset digital effects including (reverb, chorus,, delay, chorus, phaser, flanger and various multi-effects). Effects level control can adjust signal level of each effect. Effects mute button. FX footswitch input lets you turn your effects on or off . 4-Band EQ (high, high-mid, low-mid, low) per channel. Each channel is equipped with pad, must, and solo buttons with LED's. Each channel has gain, aux control, FX control, Pan control, Volume control. Peak LED indicator has a red LED that indicates a signal level that is 5dB below clipping . Dual Stereo 7-band Graphic EQ allows for precise frequency correction of monitor and main outputs (with EQ kill switch).

7. Rockville RPM45 2400w Powered 4 Channel Mixer, USB, 3 Band EQ, Effects, Phantom

Feature

Rockville RPM45 2400w Powered 4 Channel Mixer with USB, Effects, Phantom. Individual Volume, Reverb, Bass, and Treble controls. Adjustable effects: Echo and delay. USB Input. MP3 Volume control. AUX volume control. Master volume control.
4 balanced XLR inputs. 4 1/4" TRS inputs. 1 RCA L/R AUX input. 1 RCA L/R Rec output. 1 1/4" Effect loop input/output. 8-ohm dual 1/4" speaker outputs. 110/220V Switchable. +15V phantom power. Fan Vent Cooling System. Dimensions: 5.75" x 19.44" x 9.5". Weight: 18Lbs.
The Rockville RPM45 is a 4 channel wood cabinet powered mixer with USB. This mixer is one of the best sounding powered mixers on the market. This will compete with the most premium brands on the market in terms of sound quality and how much power this has. The power amp built into this mixer is 225 x 2 RMS @ 8 ohms and 300 x 2 RMS @ 4 ohms.
This powered mixer is rugged and tough! It is enclosed in a high quality wooden enclosure which can take a real beating! This model has 4 channels making it versatile enough for most parties and gigs. It has adjustable delay and echo effects, along with individual controls on each channel for reverb, bass, and treble. We added built in a USB input giving you an addition playback option.
Dimensions: 5.75" x 19.44" x 9.5". Weight: 18Lbs.

Description

The Rockville RPM45 is a 4 channel wood cabinet powered mixer with USB. This mixer is one of the best sounding powered mixers on the market. This will compete with the most premium brands on the market in terms of sound quality and how much power this has. I personally tested our RPM series of powered mixers and I was completely blown away! I ran this to (2) Yamaha speakers and even with the volume turned up half way these were insanely loud! When I cranked the volume to 90 % the clarity was just un-believable. The power amp built into this mixer is 225 x 2 RMS @ 8 ohms and 300 x 2 RMS @ 4 ohms. We rate the RMS very strictly the way famous brands like Mackie rate their items. We also supply you with program and peak ratings but RMS is the true continuous output power.
We added built in a USB input giving you an addition playback option.

Features:

Rockville RPM45 2400w Powered 4 Channel Mixer with USB, Effects, Phantom
RMS Power Output:
.....300w x 2 @ 4 Ohm
.....225w x 2 @ 8 Ohm
Program Power Output:
.....600w x 2 @ 4 Ohm
.....450w x 2 @ 8 Ohm
Peak Power Output:
.....1200w x 2 @ 4 Ohm
.....900w x 2 @ 8 Ohm
Individual Volume, Reverb, Bass, and Treble controls
Adjustable effects: Echo and delay
USB Input
MP3 Volume control
AUX volume control
Master volume control
4 balanced XLR inputs
4 1/4" TRS inputs
1 RCA L/R AUX input
1 RCA L/R Rec output
1 1/4" Effect loop input/output
8-ohm dual 1/4" speaker outputs
+15V phantom power
Fan Vent Cooling System
Dimensions: 5.75" x 19.44" x 9.5"
Weight: 18Lbs.

8. Rockville GB1 Portable Powered PA System W/Mixer+Speakers+Stands+Mic DJ Package

Feature

Rockville GB1 GIG-IN-A-BOX Portable PA System Mixer/Amp+Speakers+Stands+Mic+Case. 600 Watts (300 x 2 Channel). 7 combination XLR 1/4" inputs. Bluetooth wireless audio playback. RCA/3.5 TRS media inputs. USB MP3 playback. Digital multi-effects. LCD screen for ease of file playback and effect selection. Monitor send. Two folding speaker stands. Two 15' speaker cables. Storage compartment for optional accessories.
Convenient package with luggage-style wheels. Custom rubberized knobs. 7 channels. Two-way speaker system with 10" woofer. Seven-band graphic equalizer. Frequency Response: 40 Hz to 20 kHz +/-3 dB. Overload Protection: 10 dB of DDT that limits the PA output to preventclipping that can damage the speakers. Distortion: Less than 0.2% THD @ Max power. Signal/Noise Ratio: 88 dB mic input typical.
AC Power: 115 V AC 60 Hz or 230 V AC 50/60 Hz. Weight Assembled: 50 lbs. (22.67 kg)(stands included). Dimensions: 14.5" H x 36.75" W x 15.5" D (36.8 cm x 93.3 cm x 39.4 cm). Speakers: Woofer 10" (254 mm). Piezoelectric Horn Tweeter. Rockville RWM4200VH VHF Wireless (4) HandHeld Microphone System . Rack Mount Ears Included. Digital display on receiver and on each microphone.
High performance wireless hand held microphone system. Includes RWM4200VH transmitter with (4) hand held, high sensitivity, unidirectional, wireless cardioid microphones. Professional rack mount design . Featuring a dual filter design to limit feedback and interference. Individual microphone volume control. Comfortable ergonomic composite microphone construction. Low power consumption for longer battery life. Ultra signal stability minimizes audio artifacts.
Operating Range*: 100-200(indoor), 65-165(outdoor). Channel: Four Channel. Frequency Range: 175MHz-216MHz. Frequency Stability: 0.005%. Modulation Mode: VHF. Frequency Response: 50Hz-15KHz(3 dB). Dynamic Range: 110dB. S/N: 90dB. T.H.D: < 0.1%(1KHz). Audio Output Jack: XLR balance & 1/4 Mixed. Power Voltage: AC110V-240V 50/60Hz. Operating Temperature: 14F-122F. Mic Battery Operating Time: up to 8 hours

Description

The Rockville Gig-in-a-Box audio performance package is a complete portable PA system. The entire system is collapsable and folds into a small portable box making it easy to transport from place to place.
The package includes our all-new Rockville GB1 powered mixer, Rockville microphones with clips and two, 10" 2-way loudspeakers with stands, all cables and accessories. You get everything you need in one portable box so that you can just unpack and play your Gig.

Features:

Rockville GB1 GIG-IN-A-BOX Portable PA System Mixer/Amp+Speakers+Stands+Mic+Case
600 Watts (300 x 2 Channel)
7 combination XLR 1/4" inputs
Bluetooth wireless audio playback
RCA/3.5 TRS media inputs
USB MP3 playback
Digital multi-effects
LCD screen for ease of file playback and effect selection
Monitor send
Two folding speaker stands
Two 15' speaker cables
Rockville RWM4200VH VHF Wireless (4) HandHeld Microphone System
Rack Mount Ears Included
Digital display on receiver and on each microphone
High performance wireless hand held microphone system
Includes RWM4200VH transmitter with (4) hand held, high sensitivity, unidirectional, wireless cardioid microphones
Professional rack mount design
Featuring a dual filter design to limit feedback and interference
Individual microphone volume control
Comfortable ergonomic composite microphone construction
Low power consumption for longer battery life
Ultra signal stability minimizes audio artifacts
Operating Range*: 100-200(indoor), 65-165(outdoor)
Channel: Four Channel
Frequency Range: 175MHz-216MHz
Frequency Stability: 0.005%
Modulation Mode: VHF

9. ASC Pro Audio DJ 15 Foot Mic Microphone Mixer Powered Speaker Male to Female Patch XLR Cable

Description

XLR male to XLR Female 15 Foot active speaker or mic cable

100% Copper spiral shielding

Black cable jacket blends in with equipment

Flexible design eliminates kinks and twists

High quality superior audio signal, eliminates hums, buzzing and crackles

Compatible with all XLR audio equipment

10. 800 Watt Powered Bluetooth Speaker - PA Dual System Disco Jam, Two-Way DJ Speakers karaoke machine , USB/SD Card Readers, FM Radio, 3.5 mm AUX Input Active & Passive Speakers - Pyle PSUFM837BT

Feature

POWERFUL 800 WATTS: Pyle disco jam active powered speaker system features dual 8" woofer and dual 3.5" tweeters with 800 watts power. It's an all in one entertainment sound system for party, disco and other events
2 MICROPHONE INPUTS: These speakers are perfect for Karaoke and parties with 2 " microphone inputs. Features full range stereo sound reproduction pack with 10Oz magnet structure, 90dB sensitivity and 20Hz - 20khz frequency response, and 4 ohm rating
DIGITAL DISPLAY SCREEN: Pyle active speaker tower features a digital display screen and master volume control. The product includes wireless remote control and microphone. There's even a ported enclosure for added bass response
WIRELESS STREAMING: Pyle DJ dance speaker is bluetooth compatible and has an instant wireless music streaming ability. It has simple, hassle-free pairing that works with devices such as iPhone, Smartphones, iPad, tablet, iPod, PC and etc
5 MEDIA INPUTS: Pyle PA loudspeaker offers micro SD card, MP3 and flash USB connectivity. Simply load your card or flash drive and connect to your unit to get started. It also comes with FM Radio and RCA to 3.5mm audio connection cable

Description

Get the party started with Pyle's Disco Jam Bluetooth Speaker Systems. The PSUFM837BT allows you to play your favorite tracks as loud as you want and with style. Disco Jam speakers feature Bluetooth wireless music streaming and impressive high-power output that will add life to any occasion. This System allows cross compatibility so you can use the speakers individually or connect them to your current audio setup adding active and passive speakers. It's perfect for Karaoke parties and performances; use the microphone inputs to create an awesome sounding party and sing while you listen to music. Unit comes with (2) 1/4" microphone inputs, USB flash and SD memory card reader, 3.5mm AUX input and plenty more to get the party going.

All-in-One Entertainment Sound System
Built-in Bluetooth for Wireless Audio Streaming
Works with All of Your Favorite Bluetooth Devices (iPhones, Androids, Smartphones, iPads, Tablets, PC, etc.)
Dual Speaker Towers (One Active, One Passive)
8'' Woofer and 3.5'' Piezo Tweeter
Fully Featured 3-Channel Mixer
AUX (3.5mm) Line Input (Compatible with Devices with Headphone Outputs)
Two 1/4'' Microphone Inputs
RCA Stereo Input and Output
Speaker Output for Passive Speaker
USB Flash & SD Card Readers with FM Radio
USB Slot Doubles as a Device Charging Port
Display Screen Shows Number of Songs, Play Time and FM Radio Frequency
Master Volume Control
Built-in Crossover Network
Ported Enclosure for Added Bass Response
35mm Speaker Stand Mount
Heavy Duty Handles For Transporting
Technical Specs:
Power Handling: 800 Watts Peak Power/400 Watts RMS @4 Ohm
Woofer Magnet Weight: 10 oz.
Sensitivity (1W/1M): 90dB
Crossover Frequency: 3.5kHz
Frequency Response: 20Hz-20kHz
Crossover Frequency: 3.5kHz
Dimensions: 20.3'' (H) x 19.7'' (W) x 12.6'' (D)
AC 110/220V Power Switch
Sold as: 1 set
Weight: 35.35 lbs.

Conclusion

By our suggestions above, we hope that you can found the best powered mixer and speakers for you. Please don't forget to share your experience by comment in this post. Thank you!