Looking for a tailors board? Have a look at this 2018 guide!
When you want to find tailors board, you may need to consider between many choices. Finding the best tailors board is not an easy task. In this post, we create a very short list about top 10 the best tailors board for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 tailors board:
1. Jacksons Woodworks Tailor Board
Feature
The Tailor board can be used in five different positions.Use the Tailor Board for areas requiring a thin, crisp edge or point, such as facings, collars and lapels.
Gives you the proper pressing surface for all pressing requirements in one compact, easy to use unit.
A quality tool to give your sewing a professional look.
Comes fully assembled with no visible screws to rust.
2. Tailors Point Press Clapper
Feature
Tailors Point Press ClapperSolid Hardwood
Fully Assembled
No visible hardware that can rust and transfer to your fabric
Two tools in one
Description
Here is a valuable piece of equipment that every sewing enthusiast needs. This is three tools in one! First it is one of our great Tailors Clappers but it has the added benefits a long pointed point presser for those hard to reach seams and enclosed corners like on collars, lapels and cuffs and it also has a shorter point press for other hard to reach areas. The Point pressers are used by slipping the seam, wrong side up, over the desired point and press open. Apply steam to the area with your iron and press and hold for a few seconds to create a perfect crisp edge. The bottom of the clapper is used to apply pressure to set permanent creases to form crisp edges, and flatten bulky seams. First apply steam to the area with your iron, then firmly press with the clapper and hold until both the fabric and wood have cooled. These are made out of solid oak.3. Tailors Point Press With Two Tailors Clapper Set
Feature
Tailors Point Press with two Tailors Clappers includedSolid Hardwood
Fully Assembled
No visible hardware to rust and transfer to your fabric
A must have tool for professional looking sewing
Description
The Tailors Clapper is a must for sewing and ironing. It is used to press seams without burning. Used with steam from your iron, press the area with the clapper and hold for just a few seconds, it will leave a nice crisp seam. The larger clapper measures 8 1/2 inches long, 2 1/2 wide tapered down to 2 inches and is 1 1/2" thick and weights approximately 9oz. Smaller clapper weighs 6 oz, and measure 8" long 2" wide tapered down to 1 1/2" and is 1 1/2" thick. Both sides have routed grooves to offer easy handling. Colors may vary from the above picture, they may be lighter or darker depending on the variations of color in the wood used. Point Press is a valuable piece of equipment that every sewer needs. This is actually two tools in one. The top, narrow-surfaced, point presser side works like a tiny ironing board for pressing hard-to-reach seams and enclosed corners, like those on collars, lapels, and cuffs. A point press is used for pressing hard-to-reach seams. Slip the seam, wrong side up, over the point and press open. The bottom, large clapper side is used to apply pressure to set permanent creases to form crisp edges, and flatten bulky seams. To use, first apply steam to the area with your iron, then press with the clapper. Hold this position until both the fabric and wood (which presses the steam into the area without adding heat) have cooled. Colors may vary from the above picture, they may be lighter or darker depending on the variations of color in the wood used.4. June Tailor Press-Mate Ironing Board Cover, 59-by-20-Inch
Feature
1" grid markings throughout.4" through 14" squares and circles with blocking grid.
45 markings for bias and quilting.
Poly-cotton blend fabric with drawstring closure.
Great for precise measurements and alignment
Easy to read red grid markings
Made of 100% pre-shrunk cotton
Description
This generously sized 59 inches long by 20 inches wide board fits the standard 54 inch ironing board. 1 inch grid markings in red on cream (metric markings on rule). 4 inch through 14 inch squares and circles with blocking grid. 45 degree marking for bias and quilting. Made of 100% pre-shrunk cotton. Hand wash in warm water.5. June Tailor Quilter's Cut'n Press
Feature
Cutting and ironing board in oneDurable cutting surface
Easy carry handle
Description
Quilter's Cut'n'Press is two sided. One side has a grid rotary mat with permanent angles and bias lines; other side is a cushioned 1 inch grid pressing surface which enables you to square during pressing-additional grid features provide bias angle circle markings and bold center lines. Convenient handle. Overall area measures 13x13; Pressing surface measures 10x10; and cutting surface is 11x11.6. Chest and Sleeve Ironing Board
Feature
Easy to Iron chest and back and sleeves of any garmentPerfect to use with garment steamer
Use as pin board for tailoring
Perfect for small areas
Heavy duty aluminum frame
Description
Made of heavy 1/2 inch plywood construction. Bosom board is 9 inch x 20 inch oval, standard sleeve board 24 inch long x 41/2 inch butt x 4 inch nose on the other side.7. Bias Tape Maker Tool Set with Tape Binding Presser Foot for patchwork Includes 4 Sizes 6mm/12mm/18mm/25mm
Feature
Set of 4 Bias Tape Makers with Tape Binding Presser Foot for patchwork and AccesoriesIncludes all 4 sizes 1/4" (6mm) GREEN 1/2" (12mm) YELLOW 3/4" (18mm) RED 1" (25mm) BLUE
Also includes 1 Awl, Adjustable Snap on Bias Binder Foot, Ball Point Pins, 4 pieces wonder clips
All items are included in a nice plastic box with foam, so that they do not rattle or fall off when travelling
Description
Make any fabric into an accent, border or trim. It's fast, economical and perfectly coordinated. Pull the fabric through and iron--folds it perfectly, ready for sewing on or gluing.8. Golden Hand Ind. 0857 Point Clapper Presser
Feature
Can flatten bulky facing, a collar edge and pleatsPress even hard-to-reach spots
Create narrow seams
Description
The clapper can flatten bulky facing, a collar edge, pleats, even button holes! You can press even hard-to-reach spots with the narrow seams created by this point presser!9. Dritz Tailor's Ham
Feature
Two sides for different temperaturesPress as you sew for a professional finish
Press with grain line of the fabric, using a gentle up and down motion
Description
For pressing & molding darts, sleeve caps and curved seams. Press as you sew for a professional finish. Tailor's ham has two sides for different temperatures. Use wool side for woolens, synthetic blends & fabrics requiring low to medium temperatures. Use cotton side for cotton, linen and fabrics requiring medium to high temperatures. WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.10. Dritz Quilting Bamboo Point and Creaser (3150)
Feature
This handy tool has many uses: turn guide fabric when machine stitchingConstructed of durable and beautiful bamboo
Made in China
Recent Comments