Looking for a air vent grill? Have a look at this 2018 guide!
When you want to find air vent grill, you may need to consider between many choices. Finding the best air vent grill is not an easy task. In this post, we create a very short list about top 10 the best air vent grill for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 air vent grill:
1. 24" x 8" Fixed Bar Return Grille - All Steel Structure - Elegant Look & Sturdy Finish [Outer Dimensions: 25.75"w X 9.75"h]
Feature
Sidewall and/or Ceiling GrilleEasy Unrestricted Air Flow For Youre HVAC System
Carefully shrink wrapped with cardboard backing to prevent damage in shipment
Screws Included - No Sharp Surface Edges
24" x 8" opening (vent hole) dimension - actual size is approx 2" wider.
Description
24" x 8" opening (vent hole) dimension - actual size is approx 2" wider.The Fixed Bar style grilles add a Touch of Elegance above all other grilles. "And" they give the HVAC system a better air-flow saving you $ on the energy bill.
You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren't readily apparent, but you'll appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you'll find a smooth finished surface.
Heavy Gauge Steel. Heavier gauge than needed, built for durability and long life in mind, and yet lightweight and easy to handle.
2. 12"w X 6"h Steel Return Air Grilles - Sidewall and Cieling - HVAC DUCT COVER - White [Outer Dimensions: 13.75"w X 7.75"h]
Feature
12"w X 6"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 13.75" Width X "w X 7.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEHigh Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System - 50 angled to provide maximum airflow
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
12"w X 6"h Steel Return Air Grilles - Sidewall and Cieling - HVAC DUCT COVER - White12"w X 6"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 13.75" Width X "w X 7.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
Some of the best features aren't readily apparent, but you will appreciate the benefits over the period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
3. 24"w X 12"h Steel Return Air Grilles - Sidewall and Cieling - HVAC DUCT COVER - White [Outer Dimensions: 25.75"w X 13.75"h]
Feature
24"w X 12"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 25.75" Width X "w X 13.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEHigh Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System - 50 angled to provide maximum airflow
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
MFRG2412W 24x12 Return Grille4. 20" X 25 Steel Return Air Filter Grille for 1" Filter - Removable Face/Door - HVAC DUCT COVER - Flat Stamped Face - White [Outer Dimensions: 22.5"w X 27.5"h]
Feature
20"w X 25"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 22.5" Width X 27.5" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEHigh Quality Solid Stamped steel and No Sharp Edges
Our Filter Grille Latch is Easy To Use On Your Fungers And Requires No Screwdriver To Open.
Removable Door/Face For Easy Filter Change & Cleaning - Uses a 1" Thick Filter
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
20" X 25 Steel Return Air Filter Grille for 1" Filter - Removable Face/Door - HVAC DUCT COVER - Flat Stamped Face - White20"w X 25"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 22.5" Width X 27.5" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has " fin design
This model can have the face/door removed.
This model uses a 1" thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +2.5".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
5. 20" X 30" Heavy Duty Rigid Floor Grille - Fixed Blades Return Air Grill - Brown
Feature
20"w X 30"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 22" Width X 31.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEPowder-Coat Finish - Smooth, Shiny, Beautiful. Looks Like It Was Just Waxed
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Smooth Surface Edges - Run Your Fingers Across The Surface To Feel The Smoothness
Easy Unrestricted Air Flow For Your HVAC System
Description
20" X 30" Heavy Duty Rigid Floor Grille - Fixed Blades Return Air Grill - Brown20"w X 30"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 22" Width X 31.75" Height - SEE BELOW IN DESCRIPTION How To Measure A Grille
You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren't readily apparent, but you'll appreciate the benefits over a long period of time.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Heavy Gauge Rigid Steel. Heavier gauge than needed, built for durability and long life in mind, You can Dance on this one, no problem, will take all the weight.
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +2" at wisth and + 1.75" at width.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
6. 8" X 30" Heavy Duty Rigid Floor Grille - Fixed Blades Air Grill - Brown
Feature
8"w X 30"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 10" Width X 31.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLERigid Extra Heavy Duty to withstand constant walk on situations - Powder-Coat Finish - Smooth, Shiny, Beautiful. Looks Like It Was Just Waxed
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Smooth Surface Edges - Run Your Fingers Across The Surface To Feel The Smoothness
Easy Unrestricted Air Flow For Your HVAC System
Description
8" X 30" Heavy Duty Rigid Floor Grille - Fixed Blades Air Grill - Brown8"w X 30"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 10" Width X 31.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren't readily apparent, but you'll appreciate the benefits over a long period of time.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Heavy Gauge Rigid Steel. Heavier gauge than needed, built for durability and long life in mind, You can Dance on this one, no problem, will take all the weight.
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +2" at wisth and + 1.75" at width.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
7. Bainbridge 1970GY Light Grey Cabinet Ventilation Grill (Set of 4)
Feature
Light grey ventilation grill for cabinets, closets, and furnitureProvides air circulation where needed
Cut-out size 2-3/8" x 8-5/8"; no lip
Easy to install; simply glue in
Made in USA
Description
Bainbridge 1970BK Light Grey Cabinet Ventilation Grill (Set of 4)8. 24"w x 8"h Return Filter Grille - Easy Air Flow
Feature
24"w x 8"h Steel Return Air Grilles - Sidewall and Cieling - HVAC DUCT COVER - White. High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp EdgesHigh Quality solid stamped steel with Counter-sunk Screw Holes (Screw included) and no sharp edges.
Easy Unrestricted Air Flow for your HVAC System-50 degrees angled
To provide maximum airflow. Baked Electrostatic paint (Epoxy- Polyester). Friendly to environment.
Internal measure: the nominal measure less . External measure: the nominal measure plus 1-11/16.
Description
24"w x 8"h Steel Return Air Grilles - Sidewall and Ceiling - HVAC DUCT COVER - White These grilles and registers give you an extra measure of quality that are visible to your family members and house guests. Some of the best features aren't readily apparent, but you will appreciate the benefits over the period of time. This grille has a high standard of design, production and finish on all products. Every part is hand inspected for quality before it is packaged, no exceptions. No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface. Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment Easy Unrestricted Air Flow. How To Measure A Grille Overall Size: Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint. Total outer size of this grille is; listed size +1.75". Width vs Height The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.9. 14"w X 12"h Steel Return Air Grilles - Sidewall and Cieling - HVAC DUCT COVER - White [Outer Dimensions: 15.75"w X 13.75"h]
Feature
14"w X 12"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 15.75" Width X "w X 13.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEHigh Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System - 50 angled to provide maximum airflow
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
14"w X 12"h Steel Return Air Grilles - Sidewall and Cieling - HVAC DUCT COVER - White14"w X 12"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 15.75" Width X "w X 13.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
Some of the best features aren't readily apparent, but you will appreciate the benefits over the period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
10. 20" X 14 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White [Outer Dimensions: 22.5"w X 16.5"h]
Feature
20"w X 14"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 22.75" Width X 16.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEOur Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open.
High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
Carefully shrink wrapped with cardboard backing to prevent damage in shipment
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
20" X 14 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White20"w X 14"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 22.75" Width X 16.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has " fin design
This model can have the face/door removed.
This model uses a 1" thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +2.5".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
Recent Comments