List of the Top 10 v6 hotend you can buy in 2018

When you want to find v6 hotend, you may need to consider between many choices. Finding the best v6 hotend is not an easy task. In this post, we create a very short list about top 10 the best v6 hotend for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 v6 hotend:

Product	Features	Editor's score	Go to site
	E3D All-metal v6 HotEnd Full Kit - 1.75mm Universal - Direct, 12v - Approximately 120mm PTFE (ASSEMBLY REQUIRED)		Go to amazon.com
	Wangdd22 3D Printer J-head Hotend with Fan for 1.75mm 12v V6 Direct Filament Wade Extruder 0.4mm Nozzle+Volcano kit		Go to amazon.com
	[Gulfcoast Robotics] All Metal V6 Bowden Extruder Hotend for 3D Printer 1.75mm Filament / 0.4mm Nozzle		Go to amazon.com
	Genuine E3D V6 All-Metal HotEnd 1.75mm Universal w/ Bowden Full Kit 12V (V6-175-B)		Go to amazon.com
	EAONE All-Metal V6 J-Head Hotend Full Kit with 5 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for E3D V6 Makerbot RepRap 3D Printers		Go to amazon.com
	Kee Pang All-Metal J-Head V6 Hotend Kit with 5 Pcs Extruder Print Head and Nozzle Throat + Volcano Heating Block+ 4 Pcs Volcano Extruder Nozzles for 3D Printers		Go to amazon.com
	[Gulfcoast Robotics] All Metal V6 Hotend 1.75mm Bowden Extruder for Prusa i3 Reprap 3D Printer. Deluxe Kit.		Go to amazon.com
	Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle		Go to amazon.com
	Kee Pang All-Metal V6 J-Head Hotend Extruder Hotend kit with 2 pcs Stainless Steel Nozzle Throat + 5 Pcs Brass Printer Nozzles for E3D V6 Makerbot RepRap 3D Printers		Go to amazon.com
	Genuine E3D Block & Sock V6 Upgrade Kit (V6-BLOCK-SOCK-KIT)		Go to amazon.com

Related posts:

1. E3D All-metal v6 HotEnd Full Kit - 1.75mm Universal - Direct, 12v - Approximately 120mm PTFE (ASSEMBLY REQUIRED)

Feature

Heater Cartridge - 12V 30W
Thermistor Cartridge
30x30x10 DC Fan
Fan Duct - Cable Tie
100mm PTFE/800mm PTFE (Depending on bowden add-on or not)

Description

The v6 HotEnd Full Kit from E3D has been redesigned for your convenience from the ground up! This new hot end contains the same signature high temperature performance for high-temp printing, as well as increased functionality for printing soft and flexible filaments. The v6 HotEnd allows you to print a wide variety of materials, from soft and flexible to sturdy and strong. This is possible due to the PTFE (Polytetrafluoroethylene) liner tube through the hotend that you can extend into your extruder - this gives the ability to add the confinement and constraint needed to make excellent quality prints with flexible filaments. This technology opens new doors for your 3D printing aspirations. With High Temperature Performance, you can print with high-temp materials like Polycarbonate and Nylon - this also eliminates HotEnd meltdown failures that are common with PTFE designs. Even though the v6 has a PTFE liner inside the hotend the liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating. Basically, this design is really in-tune with all the elements, so your prints will come out crisp and accurate. The v6 has cut back on a bunch of bulk. This clean-cut version's overall length is only 62mm, and there are significant reductions in the X/Y dimensions by using the new injection moulded fan duct. Are you eager to start printing right away? Good. So are we - and that's why here at MatterHackers we praise the v6 HotEnd. No adhesives, Kapton tape, or soldering is needed to get started. The new v6 simply locks into place with a little screw, high-temp glass sleeving is used to insulate the thermistor legs. This makes installing the hotend (as well as removing) a quick and smooth process compared to earlier methods involving various adhesives.The parts of the hotend just screw together, and the fan duct naturally clips in - this can be manipulated in different ways to suit your setup preference.

2. Wangdd22 3D Printer J-head Hotend with Fan for 1.75mm 12v V6 Direct Filament Wade Extruder 0.4mm Nozzle+Volcano kit

Feature

Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intall
Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking
Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280C, 12V high speed fan, radiating quickly
Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm
Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 pcs brass extruder nozzles(1x0.3mm/1x0.4mm/1x0.5mm), 4 pcs brass volcano extruder print head(1x0.6/1x0.8/1x1.0/1x1.2) and a volcano heating block, 2Pcs teflon tube within 1.75mm stainless steel nozzle throat

Description

Description:
Compatibility: compatible with all 1.75mm V6 E3D Makerbot 3D printer.

Notice: Small parts, keep away from children

Specification:
12V/40W heater,temperature can be up to 280CLong-term temperature: 240C/ short-term temperature: 280C
12V high speed fan with shroud, radiating quickly
One meter long PTFE/teflon tubing 4mm OD 2mm ID
PC4-01 tube fitting
Volcano heating block
Outer thread : M6 M7
Nozzle throat outer diameter: 6mm
Nozzle throat inner diameter: 4mm
Teflon pipe inner diameter: 2mm
Length of nozzle throat: 22.5mm
Filament diameter : 1.75mm
Extruder brass nozzle input diameter: 1.75mm
Extruder brass nozzle output diameter: 0.3mm 0.4mm 0.5mm
Volcano extruder nozzle output diameter: 0.6mm 0.8mm 1.0mm 1.2mm

Package including:
1 x all metal V6 hotend 12V/40W/1.75mm/0.4mm nozzle/ extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 x PC4-01 Tube Fitting
1 x 0.3mm nozzle print head
1 x 0.4mm nozzle print head
1 x 0.5mm nozzle print head
1 x 0.6mm volcano nozzle print head
1 x 0.8mm volcano nozzle print head
1 x 1.0mm volcano nozzle print head
1 x 1.2mm volcano nozzle print head
1 x volcano heating block
2 x teflon tube within 1.75mm stainless steel nozzle throat

3. [Gulfcoast Robotics] All Metal V6 Bowden Extruder Hotend for 3D Printer 1.75mm Filament / 0.4mm Nozzle

Feature

Link to online assembly and configuration instructions is printed on the package
Our hotend comes with original design silicone protective sock
12V 40W heater, 12V fan, NTC 3950 pre-wired thermistor are included in the kit
Includes 1 meter long 4mm OD 2mm ID bowden line PTFE tubing

Description

Hotend is equipped with NTC3950 thermistor and 12V 40W heater

This hotend is a replica of newest, popular V6 hotend. All metal design, no PTFE in hot zone - capable of printing high temperature melting point plastics such as nylon and polycarbonate.

NTC 3950 Thermistor parameters:

NTC3950 thermistor temperature table now incuded in Marlin firmware
Small Size: 1.25mmx2.0mm glass bead
High accuracy: 1%
Resistance value at 25C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter

Package contents:

1 x V6 All Metal hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor
1 x Silicone heat protection sock
1 x Heatsink shroud with 12V 0.13A High Speed Fan 3010S
1 x One meter long bowden PTFE/teflon tubing 4mm OD 2mm ID
1 x Pneumatic Straight Fitting to connect to extruder cold end.
1 x Thermal Protection Silicone Sock

4. Genuine E3D V6 All-Metal HotEnd 1.75mm Universal w/ Bowden Full Kit 12V (V6-175-B)

Feature

Genuine E3D Parts
The E3D V6 Hot End: Smaller, Easier, High Performance
High Temperature Performance
The V6 can comfortably reach 300C with the supplied thermistor
Low bulk in X/Y dimensions

Description

Print the Widest Possible Range of Materials

The signature all-metal design allows you to reliably print high temperature materials, and it has added extra functionality with soft and flexible filaments. This opens up a huge range of new opportunities for your printer.

High Temperature Performance

The V6 can comfortably reach 300C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) or PT100 you can reach over 400C. This not only allows you to print extremely high temperature materials like Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated with PEEK/PTFE designs. The PTFE filament guide inside the V6 HotEnd is never subjected to high temperatures, so there is no risk of damage through overheating.

Compact

E3D focussed on cutting as much bulk from the E3D V6 as possible. This means an overall length of just 62mm, and low bulk in X/Y dimensions!

Easy to Use

The new thermistor cartridge simply slides into place and is secured with a single screw. High temperature glass is used in the sleeving to insulate the thermistor legs as well. This makes installing or removing the thermistor a quick and clean process compared to previous methods involving fiddly taping.

High Quality Printing

E3D kept the sharp thermal transition that gives the high quality printing performance users have come to expect from E3D HotEnds. A sharp thermal break gives better control over filament output so you get more immediate start and stops when extruding as well as retracts that are more effective in combating ooze. This means sharper, more accurate prints that have less stringing, oozing or blobbing.

Adaptable

The V6 is a fully-integrated part of the E3D Ecosystem. E3D's nozzles and blocks give more opportunity to choose how to print.

5. EAONE All-Metal V6 J-Head Hotend Full Kit with 5 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for E3D V6 Makerbot RepRap 3D Printers

Feature

Package Include: All Metal V6 Hotend 12v/40w/1.75mm/0.4mm Extruder Full Kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 5 pcs Extruder Brass Nozzle Print Head(1x0.2mm/1x0.3mm/2x0.4mm/1x0.5mm) , 5 Pcs Stainless Steel Nozzle Throat and M4 Hex driver
High temperature & heat ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280 C, 12V high speed fan, lose heat quickly
Anti-leakage & anti-blocking design: nozzle and tube connect seamless, prevent material leaking and blocking
Easy to install: NTC connector with terminal, you can install directly(Hotend is equipped with NTC3950 thermistors)
Compatibility: Compatible with all 1.75mm E3D V6 Makerbot 3D printer

Description

EAONE All-Metal V6 Hotend Full Kit with 5 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for E3D V6 Makerbot 3D Printers

Specification of All Metal V6 Hotend Full kit:

12V/40W heater, the temperature can up to 280CLong-term temperature: 240C/ short-term temperature: 280C
12V high speed fan with shroud
One meter long PTFE/teflon tubing 4mm OD 2mm ID
PC4-01 Tube Fitting

Specification of Extruder Tube:

Type : Nozzle Throat
Outer Thread : M6 M7
Nozzle Throat Outer Diameter:6mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 22.5mm
Filament Diameter : 1.75mm
Material : Stainless Steel

Specification of Brass Nozzle:

Type : Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Input Diameter: 1.75mm
Output Diameter: 0.2mm 0.3mm 0.4mm 0.5mm

Note:
Compatibility:Compatible with all 1.75mm V6 E3D Makerbot 3D printer

Attention: Small parts, keep away from children

package including:
1 x All Metal V6 hotend 12V/40W/1.75mm/0.4mm Nozzle / Extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 x PC4-01 Tube Fitting
1 x 0.2mm Nozzle Print Head
1 x 0.3mm Nozzle Print Head
2 x 0.4mm Nozzle Print Head
1 x 0.5mm Nozzle Print Head
5 x 1.75mm Stainless Steel Nozzles Throat
1 x M4 Hex driver.

6. Kee Pang All-Metal J-Head V6 Hotend Kit with 5 Pcs Extruder Print Head and Nozzle Throat + Volcano Heating Block+ 4 Pcs Volcano Extruder Nozzles for 3D Printers

Feature

100% SATISFACTION GUARANTEE: Refund your money in 30 days.Any accessory appears to be unable to work, please contact us and get free replacement
High temperature & heat ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280 C, 12V high speed fan, lose heat quickly
Anti-leakage & anti-blocking design: nozzle and tube connect seamless, prevent material leaking and blocking
Easy to install: NTC connector with terminal, you can install directly
Compatible with all 1.75mm E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intall

Description

100% SATISFACTION GUARANTEE: Refund your money in 30 days.Any accessory appears to be unable to work, please contact us and get free replacement


12V/40W heater,temperature can be up to 280CLong-term temperature: 240C/ short-term temperature: 280C
Compatibility: compatible with all 1.75mm V6 E3D Makerbot 3D printer

package including:
1 x all metal V6 hotend 12V/40W/1.75mm/0.4mm nozzle/ extruder
1 x 12V high speed fan with shroud
1 x one meter long PTFE/teflon tubing 4mm OD 2mm ID
1 x Pneumatic fittings
1 x 0.3mm nozzle print head
3 x 0.4mm nozzle print head
1 x 0.5mm nozzle print head
2 x 1.75mm stainless steel nozzle throat

1 x volcano heating block(one more 12V/40W heater and 100k NTC Thermistor)
4 pcs long nozzles(1.75mm/0.6mm,0.8mm ,1mm,1.2mm)
1 x M3 hex driver

7. [Gulfcoast Robotics] All Metal V6 Hotend 1.75mm Bowden Extruder for Prusa i3 Reprap 3D Printer. Deluxe Kit.

Feature

Link to online assembly and configuration instructions is printed on the package
Lots of spares. Kit Includes high quality, polished inside heatbreak (comes separately, not installed)
Included 12V 40W Heater, NTC 3950 Thermistor and 12V 0.13a Fan with shroud
RepRap 3D printer Extruder All Metal Hotend
Capable of printing high temperature melting plastics such as polycarbonate and nylon.

Description

Hotend is equipped with NTC3950 thermistors and 12V 40W heater, 12V fan. It is pre-assembled with all metal heatbreak and 0.4mm nozzle.

Get all necessary spare parts in one kit. Deluxe kit includes extra parts: 2 x extra heatbreaks, one all metal, anther one PTFE lined; piece of PTFE liner tubing for repairs; 3 x extra nozzles - 0.3mm, 0.4mm and 0.5mm; PC4-M6 and PC4-01 tube fittings for extruder cold end; Hex driver. Use all metal heatbreaks for higher melting point plastics and PTFE lined for easy print with PLA.

NTC 3950 Thermistor parameters:

Thermistor temperature value table for Marlin
Small Size: 1.25mmx2.0mm glass bead
High accuracy: 1%
Resistance value at 25C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter

Package contents:

1 x All Metal V6 hotend 1.75mm / 0.4mm nozzle / Fan 30mm 12V 0.13A with shroud
1 x One Meter long Bowden tubing 4mm OD 2mm ID
1 x PC4-M6 Tube Fitting
1 x PC4-01 Tube Fitting
1 x V5, V6 compatible nozzle 0.3mm
1 x V5, V6 compatible nozzle 0.4mm
1 x V5, V6 compatible nozzle 0.5mm
1 x All metal heatbreak for 1.75mm
1 x PTFE lined heatbreak for 1.75mm
1 x piece of PTFE liner tubing for repairs
1 x Hex driver.
1 x Thermal Protection Silicone Sock.

8. Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

Feature

Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intall
Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking
Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280C, 12V high speed fan, radiating quickly
Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm
Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass extruder nozzles(1x0.3mm/1x0.4mm/1x0.5mm), and a v6 heating block, 2Pcs teflon tube within stainless steel nozzle throat

Description

Descriptions:
Please recognize the seller: Wangdd22
Compatibility: compatible with all 1.75mm V6 E3D Makerbot 3D printer.

Notice: Small parts, keep away from children

Specification:
12V/40W heater,temperature can be up to 280CLong-term temperature: 240C/ short-term temperature: 280C
12V high speed fan with shroud, radiating quickly
One meter long PTFE/teflon tubing 4mm OD 2mm ID
PC4-01 tube fitting
A v6 heating block
Outer thread : M6 M7
Throat outer diameter: 6mm
Throat inner diameter: 4mm
Teflon pipe inner diameter: 2mm
Length of nozzle throat: 22.5mm
Filament diameter : 1.75mm
Extruder brass nozzle input diameter: 1.75mm
Extruder brass nozzle output diameter: 0.3mm 0.4mm 0.5mm

Package including:
1 x all metal V6 hotend 12V/40W/1.75mm/0.4mm nozzle/ extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 x PC4-01 Tube Fitting
1 x 0.3mm nozzle print head
1 x 0.4mm nozzle print head
1 x 0.5mm nozzle print head
1 x V6 heating block
2 x teflon tube within stainless steel nozzle throat

9. Kee Pang All-Metal V6 J-Head Hotend Extruder Hotend kit with 2 pcs Stainless Steel Nozzle Throat + 5 Pcs Brass Printer Nozzles for E3D V6 Makerbot RepRap 3D Printers

Feature

100% SATISFACTION GUARANTEE: Refund your money in 30 days.Any accessory appears to be unable to work, please contact us and get free replacement
High temperature & heat ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280 C, 12V high speed fan, lose heat quickly
Anti-leakage & anti-blocking design: nozzle and tube connect seamless, prevent material leaking and blocking
Easy to install: NTC connector with terminal, you can install directly
Compatibility: Compatible with all 1.75mm V6 3D printer

Description

Attention: Small parts, keep away from children
Kee Pang All-Metal V6 Hotend Full Kit with 5 Pcs Extruder Brass Print Head + 2 Pcs Stainless Steel Nozzle Throat for E3D V6 Makerbot 3D Printers
Specification of All Metal V6 Hotend Full kit:
12V/40W heater, the temperature can up to 280C?Long-term temperature: 240C/ short-term temperature: 280C? 12V high speed fan with shroud
One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 X Pneumatic fittings
Type : Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Input Diameter: 1.75mm
Output Diameter: 0.3mm 0.4mm 0.5mm

Note:
Compatibility:Compatible with all 1.75mm V6 3D printer
package including:

1 x All Metal V6 hotend 12V/40W/1.75mm/0.4mm Nozzle / Extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 X Pneumatic fittings
2 x 1.75mm Stainless Steel Nozzles Throat with PTFETube
1 x 0.3mm Nozzle Print Head
3 x 0.4mm Nozzle Print Head
1 x 0.5mm Nozzle Print Head
1 x M3 Hex driver.

10. Genuine E3D Block & Sock V6 Upgrade Kit (V6-BLOCK-SOCK-KIT)

Feature

Contains all you'll need to upgrade your standard E3Dv6 hotend to the new Sock & Thermistor Cartridge Block

Description

Contains all you'll need to upgrade your standard E3Dv6 hotend to the new Thermistor Cartridge Block. V6 cartridge heater block, V6 Silicone Sock Original x3, The new cartridge Thermistor, Thermistor cable Fixings, and applicable wrenches/screws included.

Conclusion

All above are our suggestions for v6 hotend. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using v6 hotend with us by comment in this post. Thank you!