knob mold buyer’s guide

We spent many hours on research to finding knob mold, reading product features, product specifications for this guide. For those of you who wish to the best knob mold, you should not miss this article. knob mold coming in a variety of types but also different price range. The following is the top 10 knob mold by our suggestions:

Product	Features	Editor's score	Go to site
	Environmental Technology Castin' Craft Domed Round Knob Molds		Go to amazon.com
	Drawer Pull Hardware Pack		Go to amazon.com
	Environmental Technology Castin' Craft Octagon Knob Molds		Go to amazon.com
	Environmental Technology Castin' Craft Square with Border Knob Molds		Go to amazon.com
	Four Square Knob Mold for Fusing Glass		Go to amazon.com
	Knob pull paperweight reusable plastic mold 437		Go to amazon.com
	Flat Octagon Knob mold with border 33607		Go to amazon.com
	Environmental Technology Castin' Craft Domed Oval Knob Molds		Go to amazon.com
	Flat Square Knob mold with border 33606		Go to amazon.com
	InstaMorph - Moldable Plastic - 6 oz		Go to amazon.com

Related posts:

1. Environmental Technology Castin' Craft Domed Round Knob Molds

Feature

Domed round knob mold
Reusable
6-1/2-Ounce cavities
Use with easycast casting epoxy and Castin' craft mold release/conditioner

Description

Castin' Craft knob and pull molds are available in basic and accented shapes. The molds are made from durable polypropylene.

2. Drawer Pull Hardware Pack

Feature

10 Sets of Brass Inserts & Screws for making our own drawer knobs from wood, glass, metal or ceramic
Simple to use, glue brass insert into knob with any glue such as E6000
Screws are 1 inch long and inserts are 1/2 inch long by 1/4 inch diameter.
Pack includes 10 brass inserts, 10 steel screws and instructions for use.

Description

Install your custom cast glass pulls with ease. Simply glue the brass insert into the opening, then attach to drawers or cabinets with screws. Hardware pack includes 10 sets of insets and screws.

3. Environmental Technology Castin' Craft Octagon Knob Molds

Feature

Octagon knob mold
Reusable
6-1/2-Ounce cavities
Use with easycast casting epoxy and Castin' craft mold release/conditioner

Description

Castin' Craft knob and pull molds are available in basic and accented shapes. The molds are made from durable polypropylene.

4. Environmental Technology Castin' Craft Square with Border Knob Molds

Feature

Square with border knob mold
Reusable
6-1/2-Ounce cavities
Use with easycast casting epoxy and Castin' craft mold release/conditioner

Description

Castin' Craft knob and pull molds are available in basic and accented shapes. The molds are made from durable polypropylene.

5. Four Square Knob Mold for Fusing Glass

Description

Four Square Knob Mold Just fill mold with frit to create beautiful custom door or drawer knobs. Four square door/drawer knobs per mold. Mold Size: 5" x 5" Knob Size : 1-1/2" Square

6. Knob pull paperweight reusable plastic mold 437

Feature

Color - clear
Great shape for paperweight or decorative drawer pulls
Use with your favorite resin
Reusable
Create a unique gift

Description

Mold: 2-3/4" x 1" x 1/2" deep. Mold holds 1 oz of resin when filled. How to Use Resin Molds: Remove any dust, etc. from your mold. This resin mold is reusable and made of durable, smooth polyethylene or polypropylene. Molds do not require mold release when casting with resin, however, it is strongly suggested. We recommend the use of Castin' Craft Mold Release/Conditioner. Instructions: Protect work area with freezer or wax paper. Treat molds with mold release/conditioner. Place mold tray on level surface. Fill mold cavities just below top. Once pieces are cured, turn tray over and press center area of each piece to release, flex if necessary.

7. Flat Octagon Knob mold with border 33607

Feature

Color - clear
Make your own handcrafted door knobs
Use with your favorite resin
Reusable
Use with our granite powder to create beautiful kitchen accents

Description

Octagon with Border Knob Molds Reusable 6 1/2 oz cavities. Each cavity is approximately 1 3/8 inches in diamter by 3/4 inches deep. Castin'Craft Knob and Pull Molds: Seven designer knob molds as well as a pull mold are available in basic and accented shapes. The molds are made from durable polypropylene

8. Environmental Technology Castin' Craft Domed Oval Knob Molds

Feature

Domed oval knob mold
Reusable
6-1/2-Ounce cavities
Use with easycast casting epoxy and Castin' craft mold release/conditioner

Description

Castin' Craft knob and pull molds are available in basic and accented shapes. The molds are made from durable polypropylene.

9. Flat Square Knob mold with border 33606

Feature

Color - clear
Make your own handcrafted door knobs
Use with your favorite resin
Reusable
Use with our granite powder to create beautiful kitchen accents

Description

Square with Border Knob Molds Reusable 6 1/2 oz cavities. Each cavity is approximately 1 3/8 inches in diameter by 3/4 inches deep. Castin'Craft Knob and Pull Molds: Seven designer knob molds as well as a pull mold are available in basic and accented shapes. The molds are made from durable polypropylene.

10. InstaMorph - Moldable Plastic - 6 oz

Feature

REUSABLE: Heat, mold, and use within minutes. Reheat to remold again and again.
LOTS OF USES: Create custom grips, mounts, brackets, knobs, dials, and connectors without molds.
HIGHEST QUALITY: We source the best ingredients from US and UK suppliers and package everything in our US locations to ensure the highest end quality to the consumer.

Description

It's reusable, strong & non-toxic plastic you can mold yourself!

InstaMorph is an advanced modeling compound that becomes moldable when warm (150 deg F) and solidifies at room temperature. It's made out of a lightweight polyester thermoplastic which acts like clay when warm, but when it cools, it's a strong plastic. Unlike other products that once they dry they are locked in that shape forever, InstaMorph can be reheated over and over again and re-molded into any number of configurations.

Instructions

1. Heat some water to 150+ degrees F.
2. Pour InstaMorph pellets into the water.
3. Wait approximately two minutes or until white InstaMorph pellets turn clear and stick together.
4. Remove from the water and get rid of any remaining liquid between the pellets.
5. Form into desired shape with your hands, tools, molds, or any other means necessary.
6. Once you've got your InstaMorph creation finalized, let it cool to room temperature and use.

Ideal for many projects and all skill levels

Mold it with your hands, tools, or press around an object to make a mold. InstaMorph can be painted, machined, carved or attached to other materials.

Product Uses

* Create props, masks, or other costume pieces for Halloween or theater.
* Makes excellent brackets, parts, molds, or housings for your next project.
* Make your own action figures or accessories.
* Mold around existing handles or grips for an easy ergonomic solution.
* Make custom cases or stands for the latest electronic gadgets.
* Ideal for prototypers or makers who want a strong, reusable compound.

Conclusion

All above are our suggestions for knob mold. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using knob mold with us by comment in this post. Thank you!