How to find the best heatsink dip for 2018?

by · April 21, 2018

When you want to find heatsink dip, you may need to consider between many choices. Finding the best heatsink dip is not an easy task. In this post, we create a very short list about top 10 the best heatsink dip for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 heatsink dip:

Product Features Editor's score Go to site
Aavid Thermalloy 580200B00000G Heatsink with Angled Fins, Slide-On for DIP, Pin 14/16, 0.84 Aavid Thermalloy 580200B00000G Heatsink with Angled Fins, Slide-On for DIP, Pin 14/16, 0.84" L x 0.60" W x 0.41" H (Pack of 4)
Go to amazon.com
FISCHER ELEKTRONIK - ICK SMD A 8 SA - HEAT SINK, DIP / SSOP / TSSOP FISCHER ELEKTRONIK - ICK SMD A 8 SA - HEAT SINK, DIP / SSOP / TSSOP
Go to amazon.com
HS21 Heatsink, DIP HS21 Heatsink, DIP
Go to amazon.com
Aavid Thermalloy 501200B00 Heatsink, Passive, DIP 14/DIP 16, Straight, Extruded Epoxy, 0.73 Aavid Thermalloy 501200B00 Heatsink, Passive, DIP 14/DIP 16, Straight, Extruded Epoxy, 0.73" L x 0.25" W x 0.19" H, Black (Pack of 10)
Go to amazon.com
FISCHER ELEKTRONIK ICK SMD A 8 SA HEAT SINK, DIP / SSOP / TSSOP (10 pieces) FISCHER ELEKTRONIK ICK SMD A 8 SA HEAT SINK, DIP / SSOP / TSSOP (10 pieces)
Go to amazon.com
NTE ELECTRONICS NTE448G CLIP-ON HEAT SINK FOR 40 PIN DIP TYPE PACKAGE NTE ELECTRONICS NTE448G CLIP-ON HEAT SINK FOR 40 PIN DIP TYPE PACKAGE
Go to amazon.com
HS16 Heatsink, 10-Pin Power DIP HS16 Heatsink, 10-Pin Power DIP
Go to amazon.com
KNACRO LM2596 DC-DC Buck Converter Step Down Module Power Supply Output 1.5V-33V DIP switch speed setting voltage Potentiometer can fine tune the voltage KNACRO LM2596 DC-DC Buck Converter Step Down Module Power Supply Output 1.5V-33V DIP switch speed setting voltage Potentiometer can fine tune the voltage
Go to amazon.com
BQLZR 15x15x1mm Soft Thermal Conductive Pads Heatsink IC Chipset Northbridge Pack Of 16 BQLZR 15x15x1mm Soft Thermal Conductive Pads Heatsink IC Chipset Northbridge Pack Of 16
Go to amazon.com
COOLOOdirect 30Pcs 20x20x1mm Soft Silicone Thermal Conductive Pads Heatsink IC Chipset Northbridge for CPU GPU Heatsink COOLOOdirect 30Pcs 20x20x1mm Soft Silicone Thermal Conductive Pads Heatsink IC Chipset Northbridge for CPU GPU Heatsink
Go to amazon.com
Related posts:

1. Aavid Thermalloy 580200B00000G Heatsink with Angled Fins, Slide-On for DIP, Pin 14/16, 0.84" L x 0.60" W x 0.41" H (Pack of 4)

Feature

Size: 0.84"L x 0.60"W x 0.41"H (21.3mm L x 15.2mm W x 10.4mm H)
Horizontal mounting orientation
Angled fins for better heat dissipation
Black anodized finish

Description

Slide-on heat sink with angled fins for use with 14 or 16-pin DIP packages. Features: size: 0.84"L x 0.60"W x 0.41"H (21.3mm L x 15.2mm W x 10.4mm H), horizontal mounting orientation angled fins for better heat dissipation, black anodized finish.

2. FISCHER ELEKTRONIK - ICK SMD A 8 SA - HEAT SINK, DIP / SSOP / TSSOP

Feature

FISCHER ELEKTRONIK ICK SMD A 8 SA HEAT SINK, DIP / SSOP / TSSOP

Description

External Diameter - Imperial:-.External Diameter - Metric:-.External Height - Imperial:0.189".External Height - Metric:4.8mm.External Length - Imperial:0.315".External Length - Metric:8mm.External Width - Imperial:0.248".External Width - Metric:6.3mm.Heat Sink Material:Aluminium.Packages Cooled:DIP, SSOP, TSSOP.SVHC:To Be Advised.Thermal Resistance:87C/W

3. HS21 Heatsink, DIP

Description

Type - Board Level | Package Cooled - 6-DIP | Attachment Method - Bolt On | Shape - Square | Length - 2.500" (63.50mm) | Width - 2.500" (63.50mm) | Height Off Base (Height of Fin) - 0.900" (22.86mm) | Power Dissipation @ Temperature Rise - 3W @ 20C | Thermal Resistance @ Forced Air Flow - 30C/W @ 500 LFM | Thermal Resistance @ Natural - 5.6C/W | Material - Aluminum | Material Finish Black Anodized

4. Aavid Thermalloy 501200B00 Heatsink, Passive, DIP 14/DIP 16, Straight, Extruded Epoxy, 0.73" L x 0.25" W x 0.19" H, Black (Pack of 10)

Feature

Made of black, anodized aluminum
Fits 14 and 16-pin DIP packages
No holes

Description

Heat Sink


When ICs heat up, it can lead to a big problem. Help dissipate the heat with a heat sink or heat sink compounds.

Features:
  • Made of black, anodized aluminum
  • Fits 14 and 16-pin DIP packages
  • No holes
  • Size: 0.73"L x 0.25"W x 0.19"H (18.54mm L x 6.35mm W x 4.83mm H)

    5. FISCHER ELEKTRONIK ICK SMD A 8 SA HEAT SINK, DIP / SSOP / TSSOP (10 pieces)

    6. NTE ELECTRONICS NTE448G CLIP-ON HEAT SINK FOR 40 PIN DIP TYPE PACKAGE

    Feature

    Free Shipping on orders over $50

    Description

    The NTE448G is for a 40-lead dual in-line package.

    7. HS16 Heatsink, 10-Pin Power DIP

    Description

    Power DIP Heatsink Type -Board Level | Package Cooled - 10-PowerDip | Attachment Method - Bolt On | Shape - Rectangular | Length - 3.000" (76.20mm) | Width - 4.812" (122.22mm) | Height Off Base (Height of Fin) - 1.310" (33.27mm) | Thermal Resistance @ Forced Air Flow - 0.6C/W @ 600 LFM | Thermal Resistance @ Natural - 2C/W | Material - Aluminum | Material Finish - Black Anodized

    8. KNACRO LM2596 DC-DC Buck Converter Step Down Module Power Supply Output 1.5V-33V DIP switch speed setting voltage Potentiometer can fine tune the voltage

    Feature

    This is a flexible and easy to use LM2596, DC-DC step-down module, through six DIP switches to set the output voltage flexibility, both indicators show, very convenient.
    This module uses a six DIP switches to 0.5V stepping coarse, plus trimming 3296 trimming potentiometer, it allows you to quickly and easily to any preset to a voltage of 1.5V ~ 33V.
    This module uses two high-quality binding posts.
    Input voltage:5-36V. Output voltage:1.5-33V (0.5V step).
    Output current:Rated current is 2A,maximum 3A(Additional heatsink is required).

    Description

    Input voltage:5-36V.
    Output voltage:1.5-33V (0.5V step).
    Output current:Rated current is 2A,maximum 3A(Additional heatsink is required).
    Conversion efficiency: Up to 92% (output voltage higher, the higher the efficiency).
    Switching Frequency: 150KHz.
    Rectifier: Non-Synchronous Rectification.
    Module Properties: Non-isolated step-down module (buck).
    Short circuit protection: current limiting, since the recovery.
    Operating temperature: Industrial grade (-40 to +85) (output power 10W or less).
    Full load temperature rise: 40.
    Load regulation: 0.5%.
    Voltage regulation: 2.5%.
    Dynamic response speed: 5% 200uS.
    The input setting DIP switches from top to bottom represent 0.5V 1V 2V 4V 8V 16V value, corresponding to the left to increase the value of the representative, appropriated to the right without, such as a state representative 3.5V: (Vx = 0.5 + 1 + 2 = 3.5V).
    Package included:
    1*LM2596 DC-DC Buck Converter Step Down Module.

    9. BQLZR 15x15x1mm Soft Thermal Conductive Pads Heatsink IC Chipset Northbridge Pack Of 16

    Feature

    15x15x1mm Soft Thermal Conductive Pads
    Thermal Silicone Piece
    Note: Without sticky, please use double-sided adhesive to sticke it

    Description

    Note: The color of the item may vary slightly due to photography and your own computer monitor,please understand.
    Feature:
    The pad is sticky,with good conduction,you can easily put it on IC Chipset and heatsink,you can also fix it on LED IC SMD DIP or eleswhere.
    Soft,good malleability,with a little viscosity.
    Strong insulation and Excellent performance.
    Provide a mess-free installation, maximum heat conduction and increased cooling.
    Reduce the effectiveness of your heatsink and raise the operating temperature of your processor/video card.
    With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge,memory chipset,IC chips.
    Material: conduction silicone
    Thermal Conductivity: 1.2(W/M-K)
    Continuous Temperature: -40C~200C
    Breakdown Voltage: >4KV
    Color: Blue
    Tensile Strength: 180Kgf/cm2
    The small piece:15 x 15 x 1mm
    Weight: 8g
    Note: Without sticky, please use double-sided adhesive to sticke it

    Package Includes:
    16PCS x thermal pad(15mm x 15mm x 1mm/pcs)

    10. COOLOOdirect 30Pcs 20x20x1mm Soft Silicone Thermal Conductive Pads Heatsink IC Chipset Northbridge for CPU GPU Heatsink

    Feature

    COOLOOdirect:20x20x1mm Soft Thermal Conductive Pads
    COOLOOdirect:Material: Conduction Silicone,Color: blue
    COOLOOdirect:Thermal Conductivity: 1.2(W/M-K),Tensile Strength: 12Kgf/cm2
    COOLOOdirect:Breakdown Voltage: 4.5KV,Soft,good malleability,with a little viscosity.
    COOLOOdirect Customized products for sale.

    Description

    Note: The color of the item may vary slightly due to photography and your own computer monitor,please understand.
    Feature:
    The pad is sticky,with good conduction,you can easily put it on IC Chipset and heatsink,you can also fix it on LED IC SMD DIP or eleswhere.
    Soft,good malleability,with a little viscosity.
    Strong insulation and Excellent performance.
    Provide a mess-free installation, maximum heat conduction and increased cooling.
    Reduce the effectiveness of your heatsink and raise the operating temperature of your processor/video card.
    With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge,memory chipset,IC chips.
    Material: conduction silicone
    Thermal Conductivity: 1.2(W/M-K)
    Continuous Temperature: -50~200
    Breakdown Voltage: >4KV
    Color: Blue
    Tensile Strength: 12Kgf/cm2
    The small piece:20 x 20 x 1mm


    Package Includes:
    30PCS x thermal pad(20mm x 20mm x 1mm/pcs)

    Conclusion

    All above are our suggestions for heatsink dip. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using heatsink dip with us by comment in this post. Thank you!

    • Tags:

    You may also like...