How to buy the best lathe chuck for bowls?
When you want to find lathe chuck for bowls, you may need to consider between many choices. Finding the best lathe chuck for bowls is not an easy task. In this post, we create a very short list about top 10 the best lathe chuck for bowls for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 lathe chuck for bowls:
1. PSI Woodworking CUG3418CC Utility Grip 4 Jaw Lathe Chuck System
Feature
Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathesChuck is pre-threaded to 1" x 8tpi. Includes 3/4" x 16tpi adaptor
Includes #1 Step Jaws 3/32" to 1-7/8" External & 11/32" to 3-3/8" Internal. Includes #2 Round Jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal
Includes Screw Chuck. Also includes an Allen Wrench and a set of Tightening Levers
This C series chuck works with all "C" series jaws
Description
Heavy duty chrome-plated self-centering chuck will hold your work tight and secure on midi and full size woodworking lathes. Holds spindles and bowl blanks from the inside or outside. Chuck is pre-threaded to 1" x 8tpi. Includes 3/4" x 16tpi adaptor. Includes #1 Step Jaws 3/32" to 1-7/8" External & 11/32" to 3-3/8" Internal. Includes #2 Round Jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal. Includes Screw Chuck. Also includes an Allen Wrench and a set of Tightening Levers. Weighs 5 lbs. with 3-1/4" diameter. This "C" series chuck works with all "C" series jaws.2. PSI Woodworking Products LCJC8 8-1/2-Inch Bowl Finishing Chuck
Feature
Dedicated jaws already mounted to the chuck bodyCan finish bowls up to 8-1/2-Inch in diameter
Single one hand key operation
Pre-threaded to 1-Inch by 8TPI
Contains an additional set of 8 grippers
Description
Introducing the breakthrough convenience of our new Dedicated Bowl Finishing Chuck. Save the time (10-15 minutes) and the inconvenience of swapping and installing Jumbo jaws on your Lathe Chuck every time you have to finish the bottom of a bowl. This dedicated chuck is a necessity for every bowl turner. The chuck includes a set of pre-installed jaws large enough to make an 8-1/2" bowl. The chuck features a key operated chuck body for quick and firm positioning, a chuck key, and 2 sets of grip pins. Pre-threaded for a 1" x 8tpi headstock. Will mount on other headstocks with the proper spindle thread adapters.3. PSI Woodworking CF4SC 4" Lathe Faceplate/Screwchuck for 1" x 8tpi Spindle
Feature
4" steel faceplate with screw chuckPre-threaded to 1" x 8tpi
(8) mounting holes with additional screw chuck option
Includes (2) 1" screw chucks and (8) spare mounting screws
Combination of screw chuck & faceplate mount provides a very safe & secure bowl turning setup
Description
4" steel faceplate with screw chuck. Pre-threaded to 1" x 8pi. Faceplate has (8) mounting holes with additional screw chuck option. Includes (2) 1" screw chucks and (8) spare mounting screws. Mount your bowls snugly and securely. Just mark the center of your blank, screw on the chuck at the marked center, and then secure with mounting screws. The combination of screw chuck and faceplate mount provides a very safe and secure bowl turning setup. Other available faceplates: 2" for 3/4" x 16tpi (CF2), 2" for 1" x 8tpi (CF2J), 3" for 3/4" x 16tpi (CF3), 3" for 1" x 8tpi (CF3J), 3" with Screwchuck for 1" x 8tpi (CF3SC), 4" for 3/4" x 16tpi (CF4), 4" for 1" x 8tpi (CF4J), 4" with Screwchuck for 1" x 8tpi (CF4SC), 6" for 1" x 8tpi (CF6).4. 16" Big Easy Jaws
Feature
Jaws utilize the Easy Jaw" technologySwap jaws in 30 seconds or less
Easily grip the rim of platters, bowls, and hollow forms
Accommodates projects from large to small up to a 20" swing on a lathe
Description
Big Easy Jaws from Easy Wood Tools utilize the patent pending Easy Jaw" system, which allows you to change from one set of jaws to another in 30 seconds or less. The patent pending Snap-Lock Technology uses no jaws screw or wrenches to exchange jaws. Simply use the supplied Jaw Key to depress the keeper latch in the master jaw slide, and remove and install the necessary jaw. These jaws are excellent for soft gripping small and large projects on lathes up to 20" swing by grabbing the rims of platters, bowls, and hollow forms. The urethane grippers will not mark or mar your projects. Big Easy Jaws Set includes: 1 set (4 pieces) of Easy Base Jaws, 1 set of (4) Jaw Plates and mounting screws, (8) Easy Dovetail Grippers with mounting screws, and (1) 5/32" T-handle wrench.5. Simple Woodturning Tools - 1" X 8 TPI Vacuum Chuck for Woodturning Lathe Bowl Turning
Feature
American Made and Customer Supported by Harrison Specialties , a family owned CNC machining and manufacturing facility in the land of 10,000 lakes - Minnesota.This vacuum chuck gives you a great way to finish the bottom of your bowls and other turned vessels.
Outside diameter: 3"
Steel tube length: 18" beyond the end of the chuck. Chuck material: 6061 aircraft aluminum
Watch our Simple Vacuum Chuck Demo YouTube Video to see it work!
Description
How to use this chuck: Thread the vacuum chuck onto the lathe spindle. Cover the open end of the chuck with the self adhesive rubber gasket included with the chuck. The small gasket can be used in side the chuck for holding small turning. Using a 3/8" ID plastic tube connect a good vacuum supply to the 3/8" OD tube that passes through the headstock from the chuck. Position your turning on the chuck and turn on the vacuum. Smile because you now have a great way to finish your turnings! Note: A vacuum swivel is not needed with this chuck because the tube inside the chuck is mounted in a bearing so it remains stationary as the chuck rotates. We use the single stage 3 CFM Robinair vacuum pump found on Amazon. Vacuum Chuck specifications: Outside diameter: 3.5 inches . Overall length: 4 inches Steel tube length: 18 inches beyond the end of the chuck. Chuck material: 6061 aircraft aluminum. Any questions just email we are glad to help. American Made and Customer Supported by Harrison Specialties , a family owned CNC machining and manufacturing facility in the land of 10,000 lakes - Minnesota.6. PSI Woodworking BARR6JAW 6 Jaw Heavy Duty Self-Centering Lathe Chuck System
Feature
Grabs more surface area of a larger diameter turning base than 4-jaw ChucksOutside grip is 2-1/2" to 3-1/4". inside grip is 2" x 2-3/4"
Threaded to 1-1/4" x 8Tpi. Includes 1" x 8Tpi spindle adapter
Includes (6) #2 round dovetail jaws & screw Chuck
Opens and closes with included levers. 3mm hex wrench also included
Description
This exclusive and unique 6 jaw chuck is a welcome addition to our renowned barracuda family of lathe chucks. On a 4 jaw chuck, when you spread the jaws to accommodate a larger diameter turning base, you can actually get a small gap between the jaw and the wood in the center of the jaw. This gap does not occur on the 6 jaw chuck thus providing more jaw surface area grabbing the base. It is large enough and powerful enough to use on larger lathes (over 12"). as delivered, it adapts to lathes with 1-1/4" x 8tpi and 1" x 8tpi headstock threads. Weighs 3.85Lbs. Diameter is 3.94". body depth is 2.88". thread is 1-1/4" to 8tpi. Includes 1" to 8tpi adapter. (6) #2 round dovetail jaws. Also includes a screw chuck. Gripping outside is 2-1/2" to 3-1/4". gripping inside is 2" to 2-3/4". lever operated.7. PSI Woodworking CJAWFJ2 Jumbo Flat Jaws
Feature
Scroll lathe chuck designed for finishing bowl bottomsJaws open to accommodate an 8-inch bowl
Easy to adjust sizes with the 4-position peg system
Compatible with all the PSI Woodworking 'C' style chucks
Weighs 4 pounds shipped
Description
8" flat jaws used for finishing bowl bottoms when attached to a Barracuda scroll chuck. The Jaws open to accommodate an 8-inch bowl. Includes : 8 - 1/2" and 8 - 3/4" rubber bumper pegs (16 total) to securely hold your bowl in position. It is easy to adjust sizes with the 4-position peg system. Compatible with Barracuda "C" style chucks including: CMG3C, CSC2000C, CSC3000C, CSC3000CTN. Weighs 4 pounds shipped.8. NOVA 8012 Infinity Super Infinity Quick Change Chuck with #3 Bowl Jaws
Feature
Quick change accessories in under 30 secondsTaper lock embedded dovetail design for super strong grip
Wide seamless range of accessories
Super Steel Jaw Slides - 175% stronger than normal steel
Sure grip on any timber
Description
The NOVA Infinity Quick Change system is a sophisticated line of high technology chuck and accessories offering quick change of jaws, much stronger grip, an uninterrupted range of compression and expansion sizes and enhanced work holding capacities. The NOVA Infinity Quick Change jaw design delivers amazingly fast jaw change outs. Using the NOVA Infinity Quick Change system, all four jaw segments can be removed and different jaws positively locked in place under 30 seconds! This makes it easy and fast to mount the right jaws and change out jaws for the next project or multiple projects. This will save you countless hours over the lifetime of your turning work. This is a full chuck option for those who are purchasing NOVA for the first time, or who want a full chuck alongside their existing NOVA technology. This option provides a solid geared chuck, compatible with lathes up to 20" swing. The Infinity Jaw key and Jaw slides are a metal amalgam, 3 x the tensile strength of machine grade steel. The secure embedded dovetail design provides a stronger and more rigid hold than the original NOVA screws and Jaws. The Jaw slides used are self locking, taper locked in line with the forward rotation of the chuck, holding tight at higher speeds and larger turning work. Also features auto stop slides, which restricts the opening of the chuck jaws beyond their maximum range of travel, delivering a safer turning experience and an indexing backing plate reinforced with stranded glass fibers for long life and strength. The standard equipment includes 1 x SuperNOVA2 Chuck with Infinity Jaw Slides, 1 x set of #3 Infinity Bowl Jaws, 1 x Safe lock Woodworm Screw, 1 x Infinity Push Pin Handle, 1 x Instruction Manual. Note: requires standard NOVA insert/adaptor to fit to lathe (additional purchase) All backed by our comprehensive NOVA 2-Year Full Replacement Warranty. Call our customer service center toll free on 1-866-748-3025.IMPORTANT NOTICE
Safety Advisory! Only use authentic NOVA accessories on your NOVA chuck. Using non genuine NOVA and copies of accessories could lead to operation and safety issues and will void our market leading warranty. NOVA accessories are designed for use only on NOVA Chucks. Do not use on any other chuck.
9. Hurricane Turning Tools, 10" Convertible Jumbo/Cole Jaws for the the HTC100 Woodturning 4 Jaw Wood Lathe Chuck
Feature
Jumbo or "Cole" jaws are used for gripping the top of a bowl in compression or expansion mode, allowing you to finish the bottom of the bowlJaw Plate Dimensions 9 1/2", expandable to 14 1/2" with expansion plates (sold separately)
Jaw Dimensions in the OPEN position: 11"
Made of aluminium; 8 rubber bumpers included
Only compatible with the Hurricane HTC100
Description
Our new design is made from lightweight cast aluminum for less inertia as compared to the original steel design. Cole Jaws (regardless of brand) are designed for light finishing cuts on the foot of a bowl or platter. They are NOT designed for heavy cuts, as the buttons do not provide enough holding power to keep the piece securely in place. They must be used at slow speeds (500 RPM or slower), with the tailstock live center in place and never in reverse rotation. You can purchase expansion plates to convert these jaws into 15" jaws.
Features:- Jumbo or "Cole" jaws are used for gripping the top of a bowl in compression or expansion mode, allowing you to finish the bottom of the bowl
- Jaw Plate Dimensions 9 1/2", expandable to 14 1/2" with expansion plates (sold separately)
- Jaw Dimensions in the OPEN position: 11"
- Made of aluminium; 8 rubber bumpers included
- Only compatible with the Hurricane HTC100
Hurricane Turning Tools is a premium brand of tools and accessories meeting the needs of woodturners and woodworkers. Hurricane Tools include woodturning tools, wood lathe chucks and jaws, drill bits and Hurricane Abrasives. Hurricane products are made in the USA and throughout the world, balancing the need for both high performance and affordable products.
10. Teknatool NOVA 48202 G3 Woodlathe Chuck with 2" Jaws, Woodworm Screw, ISNS 5/8" Plainbore (Shopsmith) Insert, PLUS NCSC Nova Chuck Spur
Feature
Nova Spur Center Included!Includes 2" jaws, woodworm screw, and 5/8" shopsmith adaptor insert
Ideal for Mini, Midi, and lathes up to 14" swing
Capable of turning up to a 12" bowl
Recent Comments