How to buy the best boiler drain valve 3/4?
When you want to find boiler drain valve 3/4, you may need to consider between many choices. Finding the best boiler drain valve 3/4 is not an easy task. In this post, we create a very short list about top 10 the best boiler drain valve 3/4 for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 boiler drain valve 3/4:
1. Smith-Cooper International 101 Series Brass Boiler Drain Valve, 3/4" NPT Male, Non-Potable Water Use Only
Feature
Product contains brass which does not meet federal and state requirements for drinking water.Description
The Smith-Cooper International 101 series boiler drain valve is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. This valve has a cast iron hand wheel for manual on/off control. It has male National Pipe Taper (NPT) threads for connecting to female threaded pipes, creating a tighter seal than straight threads. The maximum pressure rating is 125 pounds per square inch (psi) for cold working pressure (CWP). This valve meets American National Standards Institute (ANSI) B1.20.1 approval for quality assurance.
Boiler Drain Valves are used for heating or plumbing systems containing boilers or water heaters. These valves offer safe and secure shut-off of boilers.
Smith-Cooper manufactures a wide variety of pipe fittings and valves. The company is headquartered in Commerce, California, and meets relevant ANSI, ASTM, and International Organization for Standardization (ISO) 9002 standards.
2. American Valve M75QT 3/4" Quarter Turn Boiler Drain MIP, 3/4-Inch
Feature
3/4-inch MIP inletQuarter turn for easy operation
Ball valve design for reliability
Full port for maximum flow
3/4-in hose end outlet
Description
The American Valve M75QT is a boiler drain valve with a ball valve handle and a male inlet. It features a full port ball valve design for maximum flow and easy, reliable operation. This valve is not intended to convey water for human consumption.3. Legend 107-544NL R-670 No Lead MNPT 1/4" Turn Ball Type Boiler Drain Valve, 3/4"
Feature
200 PSI Cold Working PressureMNPT
Constructed of Forged Brass
Turn Ball-Type Plumbing Valve
Description
LEGEND MODEL R-670 Male Boiler Drain Valve is a Turn Ball-Type Plumbing Valve with a 200 PSI Cold Working Pressure. This model meets the requirements of NSF 61-G (NO LEAD ONLY). This model is constructed of forged brass and the connection is MNPT.4. Mueller 102-704 Proline Heavy Duty Boiler Drain, 3/4-Inch
Feature
3/4" MPT (1/2"FPT) x 3/4" hose threadFor cold water, oil, or air up to 125 PSI
Large flow capacity brass body with 45-Degree outlet
Neoprene seal disc - Cast iron handle
Complies with ANSI B2.1 and ANSI B2.4
Description
Since their beginning in 1917 as the Mueller Metals Co. and later Mueller Brass Co., Mueller Industries has built a well-earned reputation for offering the finest-quality plumbing, HVAC, refrigeration and industrial products in the industry.5. Smith-Cooper International 301 Series Brass Boiler Drain, Tee Handle, 3/4" NPT Male, Non-Potable Water Use Only
Feature
Product contains brass which does not meet federal and state requirements for drinking water.Description
This Smith-Cooper International 301 series brass boiler drain valve has a butterfly handle, a male National Pipe Taper (NPT) thread inlet connection, and is used to control flow (throttling) while draining a tank. The valve body and seat are constructed of brass for higher corrosion resistance than steel, its inlet connection is male NPT for connecting to a female threaded fitting, its outlet connection is male hose thread, and its elbow shape helps liquid drain away from the valve. A manually operated butterfly handle rotates the inside chrome plated brass ball mechanism, which closes with a quarter turn to regulate the flow between the connected pipe and hose, and an O-ring reduces the risk of leakage around the valve stem. The valves maximum pressure is 125 pounds per square inch (gauge) (psig) for water, oil, and gas (WOG). This rising stem boiler drain valve is a type of ball valve and is suitable for use in various tank draining systems.
Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter or the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and termed reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the balls position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.
Smith-Cooper International distributes pipe, fittings, and valves under its SCI trademark and manufactures valves under the Sharpe brand. The company, founded in 1993 and headquartered in Commerce, CA, meets International Organization for Standardization (ISO) standard 9002.
6. Legend Valve 107-144NL T-521 No Lead Boiler Drain, 3/4"
Feature
Boiler DrainPressure Rating: 125 W.O.G.
Male Iron Pipe x Garden Hose Thread
Brass Body
Description
LEGEND MODEL T-521 has a boiler drain and the body is constructed of brass. This is a low pressure valve that has a pressure rating of 125 W.O.G. This model is M.I.P. x G.H.T.7. Mueller 102-703 Proline Heavy Duty Boiler Drain, 1/2-Inch
Feature
1/2" MPT (1/2"Sweat) x 3/4" hose threadFor cold water, oil, or air up to 125 PSI
Large flow capacity brass body with 45-Degree outlet
Neoprene seal disc - Cast iron handle
Complies with ANSI B2.1 and ANSI B2.4
Description
Since their beginning in 1917 as the Mueller Metals Co. and later Mueller Brass Co., Mueller Industries has built a well-earned reputation for offering the finest-quality plumbing, HVAC, refrigeration and industrial products in the industry.8. Smith-Cooper International 100 Series Brass Boiler Drain Valve, 3/4" NPT Female, Non-Potable Water Use Only
Feature
Product contains brass which does not meet federal and state requirements for drinking water.Description
This Smith-Cooper International 100 series brass boiler drain valve has a handwheel, a female National Pipe Taper (NPT) thread inlet connection, and is used to control flow (throttling) while draining a tank. The valve body and seat are constructed of brass for higher corrosion resistance than steel, its inlet connection is female NPT for connecting to a male threaded fitting, its outlet connection is male hose thread, and its elbow shape helps liquid drain away from the valve. A manually operated handwheel rotates the inside screw mechanism, which lifts and lowers the seat disk to regulate the flow between the connected pipe and hose. The valve body has packing in the stuffing box to reduce the risk of leakage around the valve stem. The valves maximum pressure is 125 pounds per square inch (gauge) (psig) for water, oil, and gas (WOG). This rising stem boiler drain valve is a type of globe valve and is suitable for use in various tank draining systems.
Globe valves control flow rates in a piping system by the lift of a vertical stem and disk, which must be turned to open and close the valve. A seated disc extends into the center of the valve to act as a plug to restrict or open the flow path, depending on how tightly the valve stem is turned. The stem on globe valves can be either rising (moves up as the valve opens) to indicate if the flow is on or off, or non-rising (stem height remains constant when the valve is either open or closed) for use in small spaces. Globe valves are used in various water, gas, air, and steam piping systems that require frequent throttling operations.
Smith-Cooper International distributes pipe, fittings, and valves under its SCI trademark and manufactures valves under the Sharpe brand. The company, founded in 1993 and headquartered in Commerce, CA, meets International Organization for Standardization (ISO) standard 9002.
9. Smith-Cooper International 103L Series Brass Prem Boiler Drain, Potable Water Service, Elbow, Handwheel, 3/4" NPT Male
Feature
Certified to california AB1953Certified to NSF/ANSI 61-8
125 lbs CWP
Cast Brass
CSA Approved
Description
Series 103L cast brass boiler drain with stuffing box10. B and K Industries 102-053HN 1/2-Inch Boiler Drain
Feature
Easy quarter turn operationIAPMO-ANSI/NSF-61 approved
Maximum 125 PSI working pressure
Chrome plated brass ball
Teflon seats
Recent Comments