contact cement for laminates buyer’s guide for 2019

We spent many hours on research to finding contact cement for laminates, reading product features, product specifications for this guide. For those of you who wish to the best contact cement for laminates, you should not miss this article. contact cement for laminates coming in a variety of types but also different price range. The following is the top 10 contact cement for laminates by our suggestions:

Product Features Editor's score Go to site
Shoreline Marine GOOP, 3.7-Ounce, Clear Shoreline Marine GOOP, 3.7-Ounce, Clear
Go to amazon.com
3M Spray Adhesive, 17.6-Ounce 3M Spray Adhesive, 17.6-Ounce
Go to amazon.com
Dap 25312 Weldwood Contact Cement Gel Formula 1-Quart Dap 25312 Weldwood Contact Cement Gel Formula 1-Quart
Go to amazon.com
Dap 00271 Weldwood Original Contact Cement, 1-Pint Dap 00271 Weldwood Original Contact Cement, 1-Pint
Go to amazon.com
Dap Weldwood Contact Adhesive - Landau Top and Trim HHR Solvent Type Spray Grade 1 Gallon Dap Weldwood Contact Adhesive - Landau Top and Trim HHR Solvent Type Spray Grade 1 Gallon
Go to amazon.com
Wilsonart H2O Water-Based Low VOC Nonflammable Contact Adhesive - 1 Gallon Wilsonart H2O Water-Based Low VOC Nonflammable Contact Adhesive - 1 Gallon
Go to amazon.com
DAP 107 Contact Cement DAP 107 Contact Cement
Go to amazon.com
Du-Bro S-180 1 oz Devcon Contact Cement Tube Du-Bro S-180 1 oz Devcon Contact Cement Tube
Go to amazon.com
Devcon (18045-12PK) Contact Cement - 1 oz. (Pack of 12) Devcon (18045-12PK) Contact Cement - 1 oz. (Pack of 12)
Go to amazon.com
Nonflammable Contact Cement Ga Nonflammable Contact Cement Ga
Go to amazon.com
Related posts:

1. Shoreline Marine GOOP, 3.7-Ounce, Clear

Feature

Fix your boat with a tough adhesive that stand up to harsh weather
Strongest single component adhesive
UV resistant; For maximum resistance, paint over Amazing GOOP Marine
Seals with a tight, flexible waterproof hold
For Use on : wood, glass, metal, laminate, fabric

Description

Amazing goop marine is the only adhesive and sealant needed for outdoor marine use. It repairs, seals and sticks to a wide variety of materials with superior strength. Amazing goop marine is ideal for stopping leaks in waders, wet suits, diving masks, rafts and air mattresses. Weatherproof and UV resistant, it won't crack or break down under stress. Use on glass, plastic, metal, vinyl, rubber, wood and more - amazing goop marine is the most versatile and effective adhesive available.

2. 3M Spray Adhesive, 17.6-Ounce

Feature

The product is 17.6 oz Spray Adhesive
Elegant design and Smooth finish
The product is manufactured in China
High contact bond strength
One-minute dry time
High temperature resistance
Non-misting, precise spray control
This item is not for sale in Catalina Island

Description

3M Spray Adhesive 90-24, 17.60 oz (500 g). Excellent adhesive for securely bonding decorative laminates and wood moldings to tables, cabinets, shelving and furniture. Bonds metal kick plates to doors and furniture. Bonds metal drywall corner beading. Adheres polyethylene plastic and polypropylene plastic to most surfaces. Attaches plastic sign lettering.

3. Dap 25312 Weldwood Contact Cement Gel Formula 1-Quart

Feature

Tips for a good project:
(1) Think ahead
(2) Permits are important
(3) Have a realistic budget
(4) Expect the unexpected, and (5) Know the code
Premium quality neoprene contact cement dries in 15 minutes
Gel formula stays put, doesn't run
Easy to apply
Meets all CPSC requirements
This item is not for sale in Catalina Island

Description

DAP traces its roots back to 1865, when Robert H. Dicks and Elmer Wiggim began producing sealing wax for food-canning out of Dicks' garage in Dayton, Ohio. Through innovation and acquisition, the company continued to expand its product line. DAP entered into an exclusive marketing agreement with the worldwide leader in silicone technology in 1980 to market a full line of silicone sealants. In the mid 1980's, Weldwood branded adhesives came into the fold. Plastic Wood brand was integrated into the DAP portfolio of products in the 90's.

4. Dap 00271 Weldwood Original Contact Cement, 1-Pint

Feature

DAP weld wood original contact cement premium quality, neoprene-based contact cement that meets the stringent requirements of the professional user
High strength and initial grab make it ideal for most projects
The upc of the product is 070798002715
Solvent base formula
Quick grab with super strength with flash point 22 F
5 cycle freeze thaw cycle
30-45 minute drying time needed for bonding at 75 F and 50% relative humidity
This item is not for sale in Catalina Island

Description

DAP weld wood original contact cement premium quality, neoprene-based contact cement that meets the stringent requirements of the professional user. High strength and initial grab make it ideal for most projects. Fast drying formula dries in 15-20 minutes. Offers high heat and water resistance when dry. Exceeds industry performance requirements.

5. Dap Weldwood Contact Adhesive - Landau Top and Trim HHR Solvent Type Spray Grade 1 Gallon

Feature

Contact Adhesive
For Professional Use Only Due to Federal Law.

Description

The ideal contact cement for automotive interior applications. Its high heat resistance is well suited for adhering headliners, fabric, and many other materials during automobile refurbishment. Easy to apply with hot or cold spray equipment. NOTE: Due to regulations and restrictions of the item's volume exceeding 1 gallon or more, the item cannot be shipped to the state of California. For Professional Use Only Due to Federal Law. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

6. Wilsonart H2O Water-Based Low VOC Nonflammable Contact Adhesive - 1 Gallon

Feature

Safe, non-flammable, water-based contact adhesive which is non-toxic and extremely low VOC and VHAP content
Goes on white but dries clear with a superior bond strength and hold
Bonds postforming or flatwork applications
Spray, brush or roller applied for easy and fast application
Meets or exceeds Woodwork Inst. of California Type II Adhesive

Description

Wilsonart water based contact cement adhesive is designed as an alternative for locations where the use of flammable solvents is prohibited or regulated by local air quality regulations. Spray, roller or brush applied, this low order and high solids nonflammable contact adhesive is designed to have a superior bonding strength, high/economical coverage rate, and a great heat resistance. Whether you are bonding high pressure decorative laminate (HPL), leather, foam, or wood veneer to wood, plywood or particle board, WA H2O is the go-to waterbased contact adhesive for consumer or professional use.

7. DAP 107 Contact Cement

Feature

This product is a 3Oz Bott Contact Cement
Purpose of use for Caulk & Sealants, contact-cements
Manufactured in China
Bonds instantly and permanently on contact
Resists water and most chemicals
Recommended for applying plastic laminates, such as Micarta, to counter tops

Description

Dap 107 3-Ounce Weldwood Contact Cement

8. Du-Bro S-180 1 oz Devcon Contact Cement Tube

Feature

Makes a tough, permanent bond, ideal for repairing kitchen countertops, laminates, moldings, and more
Bonds as soon as the two surfaces to be bonded come in contact with one another
5 minute handling time; 5 minute set time; 5-10 minute cure time
Dries to an amber color
Tensile strength: 700 PSI

Description

Devcon Contact Cement makes a tough, permanent, waterproof bond, ideal for repairing kitchen countertops, laminates, trims and moldings, leather, carpet and more. This contact cement makes the bond as soon as the two surfaces to be bonded come in contact with one another, with a handling time of 5 minutes, set time of 5 minutes, and cure time of 5 to 10 minutes. Simply apply to both surfaces, allow cement to become tacky, then join surfaces. It is good to use removable tape on any area that you do not want Contact Cement to get on. Before the product cures, remove the tape. Bonds plastic, metal, wood, ceramic, fiberglass, leather, veneer, cork, rubber, fabric, and vinyl with a tensile strength of 700 PSI. Does not bond to polyethylene or polypropylene plastics. Extremely flammable, keep away from heat, sparks and open flame. Dries to an amber color.

9. Devcon (18045-12PK) Contact Cement - 1 oz. (Pack of 12)

Feature

Makes a tough, permanent bond, ideal for repairing kitchen countertops, laminates, moldings, and more
Bonds as soon as the two surfaces to be bonded come in contact with one another
5 minute Handling time; 5 minute Set time; 5-10 minute Cure time
Dries to an amber color
Tensile strength: 700 PSI

Description

Devcon Contact Cement makes a tough, permanent, waterproof bond, ideal for repairing kitchen countertops, laminates, trims and moldings, leather, carpet and more. This contact cement makes the bond as soon as the two surfaces to be bonded come in contact with one another, with a handling time of 5 minutes, set time of 5 minutes, and cure time of 5 to 10 minutes. Simply apply to both surfaces, allow cement to become tacky, then join surfaces. It is good to use removable tape on any area that you do not want Contact Cement to get on. Before the product cures, remove the tape. Bonds plastic, metal, wood, ceramic, fiberglass, leather, veneer, cork, rubber, fabric, and vinyl with a tensile strength of 700 PSI. Does not bond to polyethylene or polypropylene plastics. Extremely flammable, keep away from heat, sparks and open flame. Dries to an amber color.

10. Nonflammable Contact Cement Ga

Feature

Tips for a good project:
(1) Think ahead
(2) Permits are important
(3) Have a realistic budget
(4) Expect the unexpected, and (5) Know the code
Dries in 30-40 minutes, allowing for extra bonding time
Water resistant when dry
Low odor Easy water clean-up
Complies with all current VOC requirements
Exceeds industry performance requirements

Description

DAP traces its roots back to 1865, when Robert H. Dicks and Elmer Wiggim began producing sealing wax for food-canning out of Dicks' garage in Dayton, Ohio. Through innovation and acquisition, the company continued to expand its product line. DAP entered into an exclusive marketing agreement with the worldwide leader in silicone technology in 1980 to market a full line of silicone sealants. In the mid 1980's, Weldwood branded adhesives came into the fold. Plastic Wood brand was integrated into the DAP portfolio of products in the 90's.

Conclusion

All above are our suggestions for contact cement for laminates. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using contact cement for laminates with us by comment in this post. Thank you!

You may also like...