Check expert advices for temperature controller for reptiles?
When you looking for temperature controller for reptiles, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable temperature controller for reptiles is not an easy task. In this post, we show you how to find the right temperature controller for reptiles along with our top-rated reviews. Please check out our suggestions to find the best temperature controller for reptiles for you.
1. Century T7(H) FBA_BNQ-T7H Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles, 3.15 x 1.69 x 4.70, Black
Feature
EFFORTLESS HEATING SETUP: Simply set the temperature probe, plug-in the controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius.EASE OF MIND: Handy LED heating and power indicator lights allow you to see the controller's status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6 feet in length, designed to suit almost any application you can imagine.
VARIETY OF USES: Our thermostat controller can be used for seedling germination, rooting, brewing, heating, fermentation, and more, keeping your various environments in their ideal temperature range.
SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108F, temperature display range is 32 -140F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
Description
The Century Digital Heat Mat Thermostat Controller allows gardeners to select and maintain optimum; Rooting temperatures for faster seeding or cutting growth. It is compatible with many other heat mats. It works great for controlling plant or pet heat mat temperature. Programming: 1. To display in celsius, Please Press and Hold "DOWN" button for 3 seconds. Press and Hold "UP" button for 3 seconds to display temperature in Fahrenheit. 2. To adjust the temperature setting, Press and Hold "SET" button for 3 seconds to enter the temperature selection mode. Press the " UP" or "DOWN" button to adjust the temperature that you want to set. Then Press "SET" button again. So the setting temperature is done. Press "SET" button to display the preset temperature. When the unit is plugged into an electrical outlet, the "POWER" LED becomes lit, the heat on only when the "HEATING" LED is lighted. When the preset temperature is reached, the "HEATING" LED will turn off and there is no power to the heat mat. ATTENTION: If the thermostat remains "ON" ( delivering power to the heat mat) for more than 5 consecutive hours, it indicates the desired temperature is not being reached. To achieve higher temperature the Mat may need to be placed on a more insulated surface. Covering the seedling tray with a humidity dome will also help heat retention. Do not Immerse controller or probe into water. Do not exceed a total of 1000 watts of heating devices plugged into thermostat.2. Jump Start MTPRTC Digital Controller Thermostat For Heat Mats, Seed Germination, Reptiles and Brewing
Feature
The only safety ETL certified thermostat on the marketProvides constant optimal temperatures for germination/rooting
Ideal in homebrewing for maintaining desired fermentation temperature, and perfect for temperature control in reptile terrariums and small pet enclosures.
LED heating indicator light and Digital temperature control
Controllable range of 68F - 108F, Choice of Celsius or Fahrenheit readout (press Up or Down button to change)
1 Year Warranty
Description
"Hydrofarm's Jump Start Heat Mat Thermostat controls the temperature of heat mats by providing constant optimum temperature for plants, seedlings and cuttings. It is ideal for maintaing root zone/rooting temperatures in a tray and dome. Easy plug-in operation with LED indicator light, digital temperature selection, and three-prong ground plug. Controllable range from 68 to 108 degrees Fahrenheit. Includes temperature probe with 6' cord. Choice of Fahrenheit or Celsius digital readout. Heat mats are not just for gardening anymore! They are very useful for providing consistent, controllable heating for other hobbies including reptile and arachnid keeping (heating for enclosures and terrariums), homebrewing (maintaining of fermentation temperatures), and more. With this thermostat, you can easily expand any heat mat's functionality so that it provides the precise level of warmth your pets and projects require to flourish. The ability to dial in and maintain your preferred temperature means you can rest assured and no longer need to constantly monitor temperature, whether in colder or warmer environments. The Heat Mat Thermostat is the only ETL-certified heat mat thermostat on the market. ETL (Intertek) is a respected inspection laboratory which specializes in product safety testing. ETL certification is proof that a product complies with widely-accepted safety standards. The Jump Start Heat Mat Thermostat is compatible with all heat mats, and is an optional accessory for Hydrofarm Seedling Heat Mats. "3. iPower 40-108F Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing
Feature
PROFESSIONAL RELIABILITY: Digital temperature controller for heat mat in colder or warmer environmentsVARIETY OF USES: Heat mat thermostat provides constant customized temp for Seed Germination, Rooting, Reptiles, Homebrewing and Fermentation, keeping your various environments in their ideal temperature range
TEMPERATURE RANGE:Digital thermostat provides temperature control between 40F - 108F (5-42C). Temperature Display Range: 32 -140F. Choice of Celsius or Fahrenheit readout
TECHNICAL SPECIFICATIONS: 120 Volts / 8.3 Max Amps /60 HZ / 1000 Watts. Easy plug-in operation with LED illuminated indicator lights & three-prong grounded plug
QUALITY GUARANTEE:1 Year Manufacturer Warranty
Description
The iPower heat mat thermostat provides constant customized temp seed germination, reptiles and brewing. It is ideal for maintain rooting temperature in a tray and dome. Ideal in homebrewing for maintaining desired fermentation temperature, and perfect for temperature control in reptile terrariums and small pet enclosures.
This heat mat controller is compatible with all heat mats, but is optimized for iPower seedling heat mats.
Features
- Controls temperature in colder or warmer environments
- Digital temperature controller for heat mat
- Provides constant optimum temperature for specific crops
- Digital thermostat provides temperature control between 40F-108F (5-42C), temperature display range: 32 -140F
- Celsius or Fahrenheit read-out
- Specs: 120 Volts / 8 Max Amps / 60 HZ / 1000 Watts
- Easy plug-in operation with LED illuminated indicator lights & three-prong ground plug
- ETL certification is proof that a product complies with widely-accepted safety standards
- 1 Year Manufacturer Warranty
Seeding Heat Mat Setup Instructions
- Place sensor into the rooting area about 1"- 1-1/2"
- Position thermostat up and away from seedling trays and stray water. Do not submerge
- Plug heat mat into thermostat
- Plug in thermostat power cord and set maximum desired temperature
Heat mat thermostat can also be used to control the temperature of many other appliances as long as they don't exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat, and set the desired temperature.
Abnormal Warning
- if thermostat shows "E1", it means that the actual temperature is lower than 0 degree Celsius or 32.0 degrees Fahrenheit
- if thermostat shows "E2", it means that the actual temperature is higher than 60.0 degrees Celsius or 108.0 degrees Fahrenheit
- if thermostat shows "E3", it means that the temperature sensor is not working properly. Please re-install the sensor
About iPower
- iPower is one of the leading professional hydroponics suppliers over a decade.
- Our goal is to put our best products in every home & garden where needed.
- We only provide the premium quality components and reliable service.
4. Encompass All 1000W Combined - Terrarium Heat & Habitat Lighting Temperature Controller for germination/rooting & reptiles - 3 power outlets
Feature
Controls up to 1000 watts with 3 power outletsHelps maintain consistent temperature for germination/rooting & reptiles
Controllable range of 68F - 95F
Ideal in homebrewing for maintaining desired fermentation temperature, and perfect for temperature control in reptile terrariums and small pet enclosures
LED heating indicator light and easy set temperature control with external probe for accurate reading
Description
This unit allows you to control up to 1000W with preselected temperature between 68F to 95F. Helps select and maintain consistent temperature with safety shutoff at 110F. Accurate, easy-set thermostat with status indicator. 3 power outlets and external temp probe.5. Poniie PN160 Digital Temperature Controller 2-Stage Controlled Outlet Thermostat for Reptile, Heat Mat and Brewing, w/Calibration & Compressor Protection
Feature
EASY TO USE: Pre-wired plug and play design, large LCD display, high accuracy waterproof sensor, super long and flat sensor cable for easier DIY taskDUAL RELAY OUTPUT: Be able to connect with cooling and heating loads at the same time with large control range (TS1-HD~TS2+CD, -19.9~199.9)
HIGH & LOW SETPONITS: Be able to set lower and upper end temperature separately, ideal for homebrewing, fermentation, beer/wine storage, aquarium heater/fan etc
CALIBRATION & COMPRESSOR PROTECTION: Be able to calibrate temperature within 19.9 and set delay to protect your refrigerator from cycling too fast
NOTE: Setpoint TS1TS2, if you find can not increase TS1, please kindly set the TS2 value larger first. TS1 can be set equal to TS2, device will perform like other single setpoint controllers
BUY WITH CONFIDENCE: 1-YEAR Warranty by Poniie; High quality oulets for safe use; Over temperature & faulty sensor alarm setting, with setting memory function
MAXIMUM OUTPUT LOAD: 1100W for Resistive Load (Such as ordinary fan, heating rod etc.); 800W for Inductive Load (Such as compressor, heat pump etc.)
MULTI-FUNCTIONAL CONTROLLER: Dual setpoints make it a true range controller. Perfect for various purpose, such as Sous-vide, Brewing, Kegerator, Reptile, Aquarium, Breeding, Incubation, Seedling etc.
Description
Poniie Temperature Controller Outlet ThermostatPN160 is an easy-to-use, safe and reliable dual relay output temperature controller. This product is able to connect with refrigeration and heating loads at the same time to realize ideal temperature control.
The multifunctional thermostat can be used in many areas in our daily life. It is perfect to be used as over temperature protection or automatic temperature control system for various tasks. Such as Sous-vide, Home-brew & Fermentation, Kegerator, Aquarium heat control, Breeding & Incubation, Germination & Seedling heat mat etc.
Features:
Dual Relay Output, be able to connect with cooling and heating loads at the same time
Separate Heating and Cooling Setpoint, easy to set the lower and upper end temperature
Temperature calibration
Compressor delay protection
Sensor fault alarm function
High and Low Temperature Alarms
Specification
Temperature Control Range: TS1-HD ~ TS2+CD
Temperature Setpoint TS1 Range: -19.9 ~ TS2
Temperature Setpoint TS2 Range: TS1~199.9
Temperature Resolution: 0.1F
Temperature Accuracy: 1F (-19.9~176.0F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 110~125V, 60Hz
Maximum Output - Resistive Load: 1100W
(Such as ordinary fan, heating rod etc.)
Maximum Output - Inductive Load: 800W
(Such as compressor, heat pump etc.)
Start-up amp MAX. 16A
Sensor Type: NTC sensor (Waterproof)
Input Power Cable Length: 1.4m / 4.7ft
Screen Control Cable Length: 1.7m / 5.6ft
Sensor Cable Length 2.0m / 6.4ft
Outlet Dimension: 210x66x40mm (8.2x2.6x1.6inch)
Ambient Temperature: 5~140 F
Ambient Humidity: 20~85% (No Condensate)
1-Year Warranty
Package Content:
1x PN160 Temperature Controller
1x User Manual
6. HDE Digital Aquarium Thermometer Fish Tank Thermostat Water Temperature Control (3 Pack)
Feature
Best value 3 pack is ideal for owners of multiple aquatic tanks | Great for fresh water & salt water marine lifeHelps provide safe, healthy, more comfortable habitat conditions for your reptile or amphibian terrarium| Ideal for turtles, lizards, frogs, and more
Large, easy to read LCD screen displays in Fahrenheit or Celsius | Easy to apply suction cup for secure convenient placement
Submerge probe in water to measure the water temperature (Do not submerge the display) | Includes LR44 Batteries | Size of unit: 2" x 1.25"
For the most accurate results be sure not to mount near a heating unit | Temp readings within 0.1 degree | Temperature range -50c~ + 70c. Operating temperature -10c~ +50c
Description
The thermometer has an easy to read LCD display and is small and compact for discrete use. Attach the display unit to the outside of the tank using the suction cups and submerge the probe into the water in the tank. The thermometer is accurate enough to create readings within 0.1 degree. Makes caring for fish even easier, get one today and save!7. Inkbird Temperature Controller 306 Pre-Wired Dual Stage Thermostat & Timer Time Switch Only Heating for Reptile, Seedling Heating Mat, Germination,Planting ect.AC 100~240V,1200W NO COOLING
Feature
Plug and play design, easy to useCompatible with multiple temperature sensors (K, S, Wre, T, E, J, B, N, CU50, PT100)
Support reading with Centigrade or Fahrenheit unit
Power Supply Voltage: AC 100-240V 50/60Hz
Dual display window, be able to display measured temperature and set temperature at the same time
Description
Description:1, Plug and play design, easy to use;
2, Support reading with Centigrade or Fahrenheit unit
3, Maximum output load: 1650W(110V)
4, Dual display window, be able to display measured temperature and set temperature at the same time
5, Built in the fuse, power will be off when the unit is in short circuit or the unit current is over load.
6, The box is made of metal. It connects to the ground line, protecting the personal safety. So please make sure your device power plug is with the ground line.
7, Well design, the back of the unit is mental material which is for heat sink. The stand sides can leave the space between the unit and the surface of the placed objects, in order to distribute the heat.
8, Come with PT 100 food class sensor. Temperature measure range: -22~230F
Specification:
Power Supply Voltage: AC 100-240V 50/60Hz
Max output current: OUT: 15A for 120V AC, 12A for 220V AC
ALARM: AC 250V 3A resistance load
Precision display: 0.2%FS 0.1C/ F(1000C/ F)1C/ F(1000C/ F)
Sampling period: 0.5 second
Control output: Output switches power supply build-in Opto MOS, with zero voltage crosspoint switches.
Control Mode: AUTO, Manual and Manual inhibit
Character:
PV: 4 digital 49.9mm height Red LED Letters
SV: 4 digital 48mm height Green LED Letters
Working environmental temperature: -1055C/14131Fnot freezing or condensation state
Working environmental humidity: Working environmental humidity
Storage environmental temperature: -2565C/-13149Fnot freezing or condensation state
Pacakge:
1x Inkbird PID IPB16 Temperature Controller
1x 2M/6.56ft Sensor PT-100
1x Manual
8. Zilla 11939 Temperature Controller, 1000-Watt by Zilla
Description
Thermostat for pet heat elements9. Inkbird ITC-306T Pre-wired Electronic Heating Thermostat Temperature Controller and Digital Timer Controller for Aquarium, Seed Germination, Reptiles, Hatching ect, Without Cooling Controlling
Feature
Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1100W.Dual time cycle setting during 24 hours, can be set different temperature from day and night on the basis of the physical needs of animals and plants.
Maximum output load: 1100W(110V). Temperature calibration; Over-temperature and sensor fault alarm
Dual display window, be able to display measured temperature and set temperature at the same time;
Plug and play design, easy to use; Support reading with Centigrade or Fahrenheit unit
Description
ITC-306T is a pre-wired heating output temperature controller(No Cooling Controller) with time function specifically for breeding and planting. It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the physiological needs of animals and plants. ITC-306T can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.This plug and play product is designed with dual LCD display, and offers the optional display of Centigrade or Fahrenheit, which makes it more humanized temperature control. With large power output 1,200W, it's suitable for most applications. And the temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
Features:
Temperature Control Range: -50~99 C / -58~210 F
Temperature Resolution: 0.1 C / 0.1 F
Temperature Accuracy: 1C (-50 ~ 70C) / 1F (-58 ~ 160 F)
Input Power : 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Relay Contact Capacity: Heating (10A, 100-240VAC)
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
Dimension: Body:140x68x33mm (5.5x2.7x1.3 inch.)
Socket:85x42x24mm (3.3x1.7x1 inch.)
Ambient Temperature : -30~ 75 C / -22~ 167 F
Storage: Temperature -20~ 60 C / -4~ 140 F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
Package Inlcuded:
1 x ITC-306T Controller
1 x Manual
10. Zoo Med ReptiTemp RT-600 Digital Thermostat Controller
Feature
Features include a 6 foot remote sensor probe, a dual port plug receptacle to control multiple heating devices, and adhesive pads for mountingExcellent for use with zoo meds Ceramic Heat emitter and the reptile thermal under Tank Heater. Safety cover prevents accidental bumping of the temperature control dial
When used in conjunction with a timer, natural conditions are replicated by providing the proper photoperiod for your reptile, along with a beneficial nighttime temperature drop
Recent Comments