Check expert advices for marine oil extractor pump?
When you looking for marine oil extractor pump, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable marine oil extractor pump is not an easy task. In this post, we show you how to find the right marine oil extractor pump along with our top-rated reviews. Please check out our suggestions to find the best marine oil extractor pump for you.
1. EWK Pneumatic/Manual 6.5 Liter Oil Changer Vacuum Fluid Extractor Pump Tank Remover
Feature
MULTIFUNCTION OIL CHANGER MANUAL & PNEUMATIC MODEL - Quick Extraction On Pneumatic Mode, 1.6L/Min. - Oil Changing Anywhere Without Compressor On Manual Mode.WIDELY USED FOR FLUID EXTRACTION - Engine Oil, Gear Oil, Brake Oil, Coolant, Water, Etc.
PIPE FITTINGS FIT MOST EQUIPMENT - Connected Hoses Fits Car, Marine, Lawn Mower And Industrial Machinery.
EXTRACTION WITHOUT CAR LIFTED UP - Special Angle Spout Design Makes Everything Clean. Changing Oil, Your Best Partner!
REPLACING HOSES CAN BE PURCHASED SOLELY - The Nylon Hoses Are Consumables In The Set And Should Be Changed When They Are Worn Out Get New Ones By Searching EWK Extractor Hose You Can Also Get An Extra Brake Hose For Bleeding Use.
Description
Customer Service
1. Office hours: Monday to Friday 9:00am to 3:30pm (Pacific Time).
2. We will reply your message within 24~48 hours.
Shipping
1. Monday to Friday (orders placed before AM8:00) will be shipped within 24 hours.
2. Orders placed after Friday AM8:00 or national holiday will be shipped on the coming business day.
3. Buyers responsible for all custom and brokerage fees for shipments outside of the United States.
30 Days Money Back Guarantee
1. Customer MUST contact us within 30 days after the purchasing.
2. Item must be sellable condition with the original packaging. Fees may apply if item is determined as not original condition.
3. Buyer should be responsible for the return freight.
4. 20% restocking fee is NON-REFUNDABLE under any circumstances.
Warranty
1. Most of items which were marked "warranty" on the selling page apply to the warranty policy. Some item is not included.
2. Warranty period: 1 year
3. The warranty only covers the defects under normal use.
4. The warranty DOES NOT cover the defect was subjected to misuse, negligence or accident.
5. The warranty DOES NOT cover consumable parts.
6. EWK reserves the right of final decision.
2. OEMTOOLS 24389 5.3 Liter Manual Fluid Extractor, Overflow Shutoff Valve, Dipstick Tube Adapter, Leak Proof Bottom
Feature
MULTIPURPOSE EXTRACTOR: Designed to extract engine, transmission and lubricating oils from cars, motorcycles, marine engines and industrial machinery.VERSATILE APPLICATIONS: Extracts oil, power steering fluid and low-viscosity fluids, such as water and coolant.
EASY-TO-USE: Includes 5 feet of flex hose and (2) specialized dipstick adapters to extract fluids directly from the dipstick tube.
MINIMIZE CLEAN-UP TIME: 1.4 Gallon fluid reservoir features a dependable single-piece construction to drastically reduce oil and fluid spills during fluid maintenance jobs.
OVERFLOW PROTECTION: Shut-off valve prevents fluids from overflowing.
Description
The OEMTOOLS fluid Evacuator has a 1.4 gallon (5.6 Quarts) reservoir with hand operated pump to tackle Big jobs and can be used to extract most fluid types: engine oil, transmission fluid, gear oil, coolant, power steering fluid.3. 12V Transfer Pump Extractor Oil Fluid Diesel Electric Siphon Car Motorbike
Feature
5L oil liquid suction pump extractor,Small size, easy to carry and storageMaximum Pressure: Max. 0.8MPAMaximum Flow: 5L/min, Rated Power: 60W, Rated Voltage: DC 12V
Pump Diameter: Approx. 4.8cm, Cable Length: Approx. 30cm, Clips Length: Approx. 8cm
Application: Widely used in general industrial equipment, medical equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industries
Pls use when the engine is warm,the engine oil is warm and viscosity is lower,this will be easier and faster to pump
Description
Specification:Rated Voltage: DC 12V
Rated Power: 60W
Maximum Flow: 5L/min
Maximum Pressure: 0.8MPA
Pump Diameter: Approx. 4.8cm / 1.89inch
Length: Approx. 14.5cm / 5.7inch
Cable Length: Approx. 30cm / 11.8inch
Clips Length: Approx. 8cm / 3.15inch
Outlet PVC pipe Length:150cm
Nylon pipe Length:100cm
Brass pipe Length:70cm
Package include:
1x Oil Pump
1x 11mm Outlet PVC pipe
1x 6mm Nylon pipe
1x 5mm Brass pipe
How to use:
1.Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oil
2.Then connect the pump to the power, run it for a while, and observe whether the inlet and outlet is normal
3.Next,open the filler cap,get dipstick out, force the tube into the bottom of the joint, until the tube does not move; then put the inlet pipe from the oil dipstick into in end (the tube into the bottom of the tank, the bottom concave place, in order to pump the oil completely); as no oil or pumping up very slowly or intermittently, it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again
4.After oil pumping, remove the tube, and then run the pump for a while, pump the remaining oil inside the pumping clean, or pump water for a while until the pump head gets clean
If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out
Note:If you want to connect this pump to AC power, you will need a power converter.
4. Jabsco 17850-1012 DIY Engine Oil Change System, 3.5 Gallon Capacity, 12 Volt
Feature
Will extract up to 50 weight of oil at a temperature of 160F (71C) through the engine's dip stick tube, usually in less than 5 minutes8 feet (2.4m), oil & heat resistant 1/4 inch suction tube
6 feet (1.8m) battery leads with aligator clips
Four easy steps to fast, clean oil
Self-contained oil change system
Description
The do-it-yourself oil changer is simple to use, and offers quick and easy changes for the leisure boater5. Jabsco 34060-0130 Marine Engine Oil Drain Hand Pump (10.25" Long, 1.25" Diameter),Brass
Feature
1 Year WarrantyDescription
The Jabsco Oil Drain Pump connects to current marine engine oil dipstick tube on OMC, Mercruiser, and other marine engines with a threaded male garden hose fitting on the engine dipstick tube. Unique design allows for one hand pumping for quick and easy oil draining. Includes pump with 3/4'' brass fitting and 1/2'' X 2' drain hose.6. SHURFLO 8050305426 Oil Change System
Feature
Voltage - 12 VDCFlow Rate - 3.75 GPM
Liquid - 130 F Max
Leads - 8' w/ Alligator Clips
Description
Oil change system. Other uses may include 12 VDC pressurized water systems, winterizing and liquid transfer. Ignition protected. Buna impeller. 8' cable w/battery clips. Hose kit included and 3 gal [11.4L] storage container. Uses: Winterizing, oil change and liquid transfer.7. Shoreline Marine Oil Changer, 12 Volts
Feature
12V powered and clips to marine batteryEmpties several quarts of oil in just minutes
Complete with collection tube and discharge tube
Description
Compact and easy to use oil changer.8. Trac Outdoor T10060 Fluid Extractor
Feature
For all types of motors, watercraft and vehiclesSelf-priming pumps create a powerful vacuum to remove oil, fuel, coolant, transmission fluid--- almost any non-corrosive liquid
Easier, cleaner way to drain engines with hard-to-reach drain plugs
Great for pumping out bilge water and trapped fluids
Includes hoses and adapters
Description
For all types of motors, watercraft and vehicles. Self-priming pumps create a powerful vacuum to remove oil, fuel, coolant, transmission fluid--- almost any non-corrosive liquid. An easier, cleaner way to drain engines with hard-to-reach drain plugs. Hand-held style can be used with any container of your choice. Great for pumping out bilge water and trapped fluids. Includes hoses and adapters.9. Camco Do It Yourself Boat Winterizer- Quickly Winterize Marine Engines, Allows Flushing and Preparation of Boat Engine for Winter Storage (65501)
Feature
Saves time and money season after seasonAllows flushing and preparation of boat engine for winter storage with just five gallons of antifreeze (sold separately) and your flusher
Quickly winterize inboard/outboard marine engines
Winterizes your engine right on the trailer
Easy to use gravity flow system
Description
With Camco's DIY Boat Winterizer you can quickly and efficiently winterize inboard/outboard marine engines. The Do-It-Yourself winterizer allows flushing and preparation of boat engines for winter storage with just five gallons of antifreeze (sold separately) and your flusher. You save time and money season after season. It is great for technicians too. If using a front mounted raw water pump system, use Camco's Flush Adapter (sold separately).10. Jabsco 17800-2000 Marine Porta Quick Oil Changer, Flexible Impeller Pump, Reversing Switch 3.5 Gallon, 12-Volt, Non CE
Feature
Quick, clean and easy oil changes on boardUses vessel's own power supply to operate heavy-duty flexible impeller pump
Reversing switch allows for pumping oil in either direction
Includes 4 feet of neoprene hose with 40 inch PTFE dipstick probe;Fuse Size: - 10(ampere)
1 year waranty
Description
- Body Materials: Bronze
- Impeller: Nitrile
- Seal: Lip Type
- Voltage: 12 (Vdc)
- Motor Type: Reversible with integral reversing switch
- Container: Plastic with 14 quart capacity
- Power Cord: 8 feet with alligator clips
- Suction Hose: 4 feet of neoprene hose with 40 inch PTFE dipstick probe
- Dimensions: 13-1/2 inches diameter, 13-5/8 inches high (34.3 centimeters diameter, 35.4 centimeters high), Weight: 9 pounds, (4.1 kilogram)
Recent Comments