Best soldering filter for 2018
Finding your suitable soldering filter is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best soldering filter including detail information and customer reviews. Let’s find out which is your favorite one.
1. Hakko FA400-04 Bench Top ESD-Safe Smoke Absorber
Feature
Can be operated standing up or laying down in a low-profile positionLow profile position provides approximately 2-1/2 times the airflow and efficiency
ESD-safe by design and is made of ESD-safe materials
Activated Carbon filter contains over 8g of highly activated carbon
Quick and easy filter replacement
Description
Breathe easy with the Hakko FA-400 bench top smoke absorber. The FA-400 removes soldering smoke and fumes quickly, safely and efficiently. The unit can be used in a vertical (standing up) position or low-profile position (laying down.) When used in the low-profile (laying down) position, efficiency and air flow is increased by approximately 2.6 times.2. Aoyue AO486 486 Benchtop Solder Smoke Absorber
Feature
Great for electronics, arts and crafts, and stained glass workQuiet yet powerful operation
Activated carbon filter
ESD-safe
Description
It's time to breathe easy! This bench top fume extractor removes soldering smoke and fumes quickly, safely and efficiently. Great for electronics, arts and crafts, and stained glass work.Quiet yet powerful operation. Approx 37 cubic feet per minute airflow Activated carbon filter absorbs up to 80 percent of the odors from the air and is easy to replace ESD-safe by design Approx. 5"x5" filter area Unit measures Approx. 11"h x 8"w x 6"d One Extra replacement filter included.
3. 1000l Adjustable Solder Smoke Absorber Remover Fume Extractor Carbon Filter Quiet Fan for ESD Soldering Station
Feature
The filter consists of foam and activated carbon, Which is ideal for absorbing toxinsAdjustable absorbing angle
Low noise and high- efficient fan
Made of antistatic material
Easy to replace filter
Description
Features:- The filter consists of foam and activated carbon, Which is ideal for absorbing toxins.
- Adjustable absorbing angle.
- Low noise and high- efficient fan.
- Made of antistatic material.
- Easy to replace filter.
Specification:
- Power supply: AC120, 60Hz
- Power consumption: 30W
- Maximum air flow: 1000L/min
- Inlet concentration: 2(mg/L)
- Dimensions: 8.7 x 10.6 x 6.6 in
- Weight: 2.33lb
- Carbon filer Size: 5.1 x 5.1 x 0.4 inch
- Amount of activated carbon filter: 0.02lb
- Max. Absorbing weight of components per one filter: 0.004lb
Package contents:
- 1x soldering absorber
- 1x manual
4. CML Supply 493 Benchtop Solder Smoke Absorber
Feature
Great for electronics, arts and crafts, stained glass workQuiet yet powerful operation
Activated carbon filter
ESD-safe
Larger Filter Area as compared to competition
Description
It's time to breathe easy! This bench top fume extractor removes soldering smoke and fumes quickly, safely and efficiently. Great for electronics, arts and crafts, and stained glass work.
* Quiet yet powerful operation. Approx 37 cubic feet per minute airflow
* Activated carbon filter absorbs up to 80 percent of the odors from the air and is easy to replace
* ESD-safe by design
* Approx. 5.5"x5.5" filter area
* 110 Volts, US plug
* Unit measures Approx. 12"h x 8"w x 6"d
* Compatible with Aoyue 486 smoke absorber, Hakko 493-10, Weller WSA-350 and others
* 60 days no hassle money back or exchange, 1 year warranty
5. Hakko 599B-02 Wire-type soldering iron tip cleaner
Feature
Cleans better than conventional spongesNo water required
Will not reduce the tip temperature
Does not cause premature wear of soldering iron tips
No contamination risk compared to conventional tip tinners
Description
The Hakko 599B-02 is a replacement solder tip cleaning wire sponge. These sponges are hard enough to remove debris and some corrosion from the solder tips while being soft enough not to damage the tip. They help to remove oxides and excess solder to preserve tip life and enable clean, precise soldering.6. Carbon Filter, ESD, Activated, 5pk for Hakko/Xytronic/Aoyue Smoke Absorber
Feature
5/pkMade in the USA
Fits Hakko Corp 493, FA-400, Xytronics 426DLX and 456DLX,and Aoyue 486
Packed in a convenient zip-lock bag
Description
Replacement activated carbon filter for Hakko Corporation 493 and FA-400, Xytronic 426DLX and 456DLX,and Aoyue 486 bench top smoke absorber. 5 pack. Heavier carbon load than competition. Individual carbon filter dimensions are 130 mm x 130 mm x 10 mm (5 1/8" x 5 1/8" x 3/8"). NOTE: Not affiliated with Hakko Corporation, or Xytronic., all use and references of Hakko and Hakko model numbers are property of Hakko Corporation.All use and references of Xytronic model numbers are property of Xytronic-USA a White Industrial Co.All use and references of Aoyue and Aoyue model numbers are property of Tongyi Electronic Equipment Factory7. BULUSHI Soldering Iron Tip Cleaning Wire Nozzle Cleaner Sponge Ball w Holder (black)
Feature
Product Name: Soldering Iron Tip Cleaning Wire SpongeMaterial: Metal, Scrubber, Diameter (Approx. ); 6cm / 2.4"
Holder Size: 6.5 x 7cm/ 2.6" x 2.8" (D*H)
Weight : 91g, Color: Black , Copper Tone,
Package Content : 1 x Soldering Iron Tip Cleaning Wire Sponge 1 x Holder
Description
The sponge will help clean your soldering iron tip. Brass sponges clean better than conventional sponges and will not damage your iron tip. Made of low abrasive brass shavings and requires no water.8. Soldering Tip Cleaner Solder Tip Cleaning Wire for Cleaning Soldering Irons and Tips, No Water Needed2 Pack
Feature
HIGH PERFORMANCE: No water required When you need to clean the Soldering Iron Tip, It will not reduce the tip temperature, and make the process of soldering tin work smoothly.DURABLE AND LONG LIFE: These wire tip cleaners Clean better than conventional sponges. It can reduce oxide accumulation effectively and prolong soldering iron tip service life.
MATERIAL: High quality brass material
SIZE: 2.4 Inch in diameter
PACKAGE: 2 pieces wire tip cleaners
9. HUELE 6PCS Soldering Solder Iron Tip Cleaner Brass Cleaning Wire Sponge Ball
Feature
Made of high quality material, it is reliable in performance.Packing included 6 pcs soldering solder iron tip cleaner cleaning wire sponge ball.
Easy to clean soldering head without water.
Remove residues quickly and effectively.
Save energy, maintain temperature of the iron.
Description
Soldering Solder Iron Tip Cleaner Brass Cleaning Wire Sponge Ball.10. YAOGONG Wire-type soldering iron tip cleaner Brass wire sponge No Water need(5 Pack)
Feature
No water requiredCleans better than conventional sponges
Will not reduce the tip temperature
Does not cause premature wear of soldering iron tips
No contamination risk compared to conventional tip tinners
Recent Comments