Best skill saw cutting guide to buy in 2018
We spent many hours on research to finding skill saw cutting guide, reading product features, product specifications for this guide. For those of you who wish to the best skill saw cutting guide, you should not miss this article. skill saw cutting guide coming in a variety of types but also different price range. The following is the top 10 skill saw cutting guide by our suggestions:
1. DEWALT DWE575SB 7-1/4-Inch Lightweight Circular Saw with Electric Brake
Feature
The product is 7-1/4" Circle Saw/BrakeEasy to use
The product is manufactured in China
Lightweight and compact 8.8-Pound
Electric Brake
Patented 15-Amp motor
57-Degree beveling capacity with positive stops at 45-Degree and 22.5-Degree
Integrated Dust blower
Description
The Dewalt DWE575SB 7-1/4-inch lightweight circular saw with electric brake is designed to be one of the lightest and well balanced saw in its class at only 8.8 pounds, with an electric brake that stops the blade after the trigger is released. A ball bearing lower guard provides a durable design even against dust contamination for smooth retraction along with the high grade stamped aluminum shoe that provides the user with a durable and smooth base for accurate cutting. Advanced lower guard geometry for bevel cuts with integrated dust blower allows the user to clear the sightline while cutting. A patented tough cord protection system provides 3x durability against cord pull-out. On-board blade wrench storage allows for easy storage and convenience for blade changes. It also includes a handy carrying case for easy portability.
Small but Powerful
Weighing only 8.8 pounds and measuring 7.2 inches in width, the DWE575SB is one of the lightest circular saws in its class. Despite its small size, the unit delivers plenty of power to perform some of the most demanding applications with 1,950 Max Watts Out (MWO) and 5,100 revolutions per minute (RPM). The saw is ideal for framers, concrete formers, general contractors, and remodelers who are tasked with completing applications ranging from framing walls to cutting plywood, siding, exterior finishing, and more. Also, thanks to an integrated dust blower that cleans the users line of sight before cutting and high quality gears, the saw provides smooth cutting, high quality performance. The saw also features a 57-degree bevel capacity, with 22.5- and 45-degree detents, and a 2 9/16-inch depth of cut capacity, which is best in class and allows for a variety of applications.
Tough and Durable
To provide durability, DEWALT incorporated several features into the design of the new circular saw. For instance, a ToughCord cord system provides three times more resistance to cord pullouts when compared to circular saws without a ToughCord system. To aid in comfort and balance, the new circular saw features ergonomic handles and trigger actuation. The DWE575SB also features an electric break that allows for the saw blade to stop after two to three seconds from the time the trigger is released, providing additional safety. This feature allows users to start repetitive cuts faster.
What's in the Box
7-1/4 inch circular saw, blade wrench, carbide-tipped 7-1/4 inch circular saw blade, user instruction manual, contractor bag.
Key Specifications
- Amps: 15 amps
- Max Watts Out: 1950 watts
- No Load Speed: 5200 rpm
- Bevel Capacity: 57 degrees
- Bevel Stops: 22.5 and 45 degrees
- Electric Brake: Yes
- Rear Pivot: No
- Blade Diameter: 7-1/4 inches
- Depth of Cut at 90 degrees: 2.55 inches
- Depth of Cut at 45 degrees: 1.9 inches
- Tool Weight: 8.8 pounds
2. SKIL 5280-01 15-Amp 7-1/4-Inch Circular Saw with Single Beam Laser Guide
Feature
15-Amp motor for more power and performance than the SKIL 5680. Motor Housing Material:Resin15% weight reduction vs. SKIL 5680, reduces user fatigue
Single beam laser for more accurate cuts. Arbor size: 5/8 inches, cord length: 6 feet
Carrying bag for convenient portability and storage
51Degree bevel with positive stop at 45Degree for greater cut capacity that SKIL 5680
Description
For the more experienced user who needs a powerful circular saw with advanced features, the SKIL 5280 7-1/4 inch circular saw is the saw for the job. The 15-Amp motor has the power and performance you need to quickly cut lumber and sheet goods for a room addition, deck and more. The single-beam laser guides cuts with increased accuracy, while the integrated dust blower keeps the line of cut sawdust free. The 51 degree bevel, with positive stop at 45 degrees, gives a variety of cut options, while blades changes are easier with spindle lock and on-tool wrench.3. Kreg KMA2675 Kreg Rip-Cut
Feature
Connects to most circular saws-right or left bladeReversible Guide Arm for Right or Left Hand Use
Rips cuts from 1/8-Inch to 24-Inch wide
No measuring, marking, and no chalk lines
100-Percent Guide support through entire cut
Description
Ripping down large panels into smaller more manageable workpieces is one of the trickiest, most intimidating, and expensive steps of any wood project. Even if you're ripping with the nicest table saw, you're still forced to lift large heavy panels, balance them carefully to avoid binding and bowing, while at the same time trying to support the finished workpieces and waste material as they exit the saw. There is a faster way. There is an easier way! There is a better way. Introducing the all-new Kreg Rip-Cut. The Rip-Cut is an incredibly handy tool which speeds and simplifies the process of ripping down large plywood and MDF panels. No measuring, no marking, no chalk lines-the Rip-Cut quickly and easily attaches to almost any circular saw, letting you cut pieces from 1/8-Inch up to 24-Inch wide with tremendous accuracy. The Rip-Cut is a no-nonsense, straight forward, accessory for your circular saw. It features a durable design including a solid aluminum guide rail, an easy-to-read adjustable scale, and a reversible guide arm which works whether you're left or right handed and whether your blade is on the left or right side of the saw. It's an incredibly easy, precise, and affordable way to break down large panels for almost any project.4. Kreg KMA2685 Circular Saw Guide
Feature
Make rip cuts and crosscuts up to 24" wideCut multiple pieces to the same size with just one setup
Use the oversize edge guide for precise control throughout the cut
Eliminate need for marking, measuring, and layout lines
Take your saw to the material instead of having to take your material to the saw
Description
TURN AN ORDINARY CIRCULAR SAW INTO A PRECISION EDGE-GUIDED CUTTING TOOLGreat projects start with high-quality cuts, and you can make those cutsmore easily than you ever imaginedusing your circular saw plus the Rip-Cut Circular Saw Edge Guide.
The Kreg Rip-Cut turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut, you can cut with the confidence you want and the precision you need.
The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you wantup to 24"using the built-in measuring scale, and then make your cut.
With a built-in measuring scale, you dont have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you're all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.
The Rip-Cut is very easy to use. Simply mount your saw to the universal sledit accepts most left-blade or right-blade sawsand then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24") using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. Youll get straight, accurate, repeatable cuts easily every time.
5. Kreg KMA2600 Square-Cut
Feature
Switch back and forth between any circular or jig sawAdjustable arm requires no trimming
Supports work pieces up to 12-Inch wide
Low-profile design won't interfere with saw
Built-in roof pitch scale for cutting siding
Description
Kreg KMA2600 Square-Cut, 1/2" wide6. DEWALT DWS5100 12-Inch Dual-Port Folding Rip Guide
Feature
12-inch Ripping Capacity on Left Side for common rips such as stair treads and risersUp to 14 1/2-inch Ripping Capacity on Right Side for maximum width rip cuts
Lightweight and durable aluminum construction for portability and strength
Folds down to 19-inch long by 3-inch wide for easy storage
Permanently laser-etched markings for accurate and fast setting;
Description
The DWS5100 12 in. Dual-Port Rip Guide has a 12 in. rip capacity on left side for common rips including stair treads and risers. Features up to 14-1/3 in. rip capacity on right side for maximum width rips. Lightweight and durable aluminum construction and ability to store compactly provide portability. Includes: 2 Installation Screws.7. Bora 543059K Jigsaw Guide and 50" WTX Clamp Edge Combo
Feature
Firm, steady guide for your jigsaw that attaches easily to the Bora WTX Clamp Edge, allowing for accurate, precise, straight cutsDesigned to accommodate almost any size jigsaw with the Bora WTX Clamp Edge
Two "tongue and groove" points slide into the Bora WTX Clamp Edge's T-Track slots, keeping your cuts true.
Adjustable blade indicator eliminates the guess work with setting up of cuts
Makes perfect radius/circle cuts when used with circle cutting option
Description
The Bora WTX Clamp Edge guide is the perfect addition to your circular saw, router or jigsaw allowing you to make straight cuts with ease. Made out of heavy gauge, extruded aluminum, the WTX clamp edge is tough and durable. The adjustable end clamp slides easily along precise channels. The locking handle grabs work surfaces and won't let go giving you a secure edge that won't budge. The WTX clamp edge is 50 inches long and with connector accessories you can add an additional 50 inches of cutting capacity. The Bora Jigsaw Guide accessory is designed to work seamlessly with your Bora WTX Clamp Edge in fact, it cleverly fits into the T-Track slots of the clamp edge, allowing it to slide along while the saw remains straight and stable to the side. The minute you open this and set it up, your first thought will be how clever. Theres an elegant simplicity in the design theres one adjustable plate that locks down with a simple screw handle, which allows it to accommodate nearly any size jigsaw. Its also very unobtrusive, allowing your saw to rest easy and snugly, without clamping the saw itself. These features allow for a quick-change in moving from one type of cut to another cut a straight line, then simply pick up the saw, remove the WTX clamp edge from your material, and immediately make radius cuts or, cut freehand. Youll love it! And like everything Bora makes, the quality and design are unbeatable.8. Kreg KMA2700 Accu-Cut 48-Inch Guide Track System With KMA2685 Rip-Cut 24-Inch Precision Edge Guide
Feature
CUTS: Make rip cuts and crosscuts up to 24" wide / Cut multiple pieces to the same size with just one setup / Prevent splintering with anti-chip strips that support material during the cutGUIDE: Use the oversize edge guide for precise control throughout the cut / Eliminate need for marking, measuring, and layout lines / Hold track in place without clamps thanks to anti-slip guide strips
EASY SAWING: Take your saw to the material instead of having to take your material to the saw
VERSATILE: Rip, cross cut, and make angled cuts up to 48" long in plywood, MDF, and panels / Simply align the Guide Track with your marks to make accurate cuts
BUNDLE INCLUDES: Kreg KMA2700 Accu-Cut 48-Inch Circular Saw Guide Track System
Description
Rip-Cut:Make rip cuts and crosscuts up to 24 inches wide Rip-Cut:Cut multiple pieces to the same size with just one setup Rip-Cut:Oversizereversible guide for precision and ambidexterity Rip-Cut:Removeneed for marking, measuring and layout lines Rip-Cut:Includes universal sled, saw guide and circular guide rail Accu-Cut:Rip, cross cut and make angled cuts up to 48" long Accu-Cut:Makes straight, precise and splinter-freecuts Accu-Cut:Simply align with marks to make super-accurate cuts Accu-Cut:Anti-slip coating and anti-chip feature Universal: Two interchangeable saw sleds included9. DEWALT DW3278 Circular Saw Rip Fence
Feature
Rip fence for use with most DEWALT circular sawsProvides smooth, precise results
simple to fasten and designate distance from blade to fence
Easy attaching by inserting through slots at front of shoe and tightening screw
Ruggedly crafted from all metal for long life
Description
For accurate ripping without penciling problems. For use with all DeWalt circular saws.10. WORX WORXSAW 4-1/2" Compact Circular Saw WX429L
Feature
Cut 2x4's in a single pass with an easily maneuverable compact saw that weighs 50% less than a traditional 7-1/4" circular sawThin blade makes for less tool strain, resulting in full size circular saw cutting speed and performance.Blade Size 4.5 inches. No-Load Speed 3500/rpm
Easy-set depth gauge lever and 0-45-degree bevel settings for quick adjustments. The WORXSAW is substantial enough to cut through nominal 2 inch lumber, yet light enough for the DIY'er to easily and comfortably maneuver. Cut wood, metal, tile or plastic with ease
Left-sided blade design for great cut-line visibility; grip with integrated safety trigger for comfort, balance, and control
Box includes 4-1/2" WORXSAW, 24T Carbide-tipped Blade, Parallel Guide, Vacuum Adapter, Allen Key, and Manufacturer's 3-year warranty
Recent Comments