Best shimano hollowtech ii tool
If you looking for shimano hollowtech ii tool then you are right place. We are searching for the best shimano hollowtech ii tool on the market and analyze these products to provide you the best choice.
1. SHIMANO Hollowtech-II crank-arm/cap tool, TL-FC16
Feature
To install/remove cap on non-drive crank armShimano integrated cranks only
Description
Special, splined interface tool for Hollowtech II crank/BB. Torque: .04-.07Nm.2. Park Tool BBT-9 Bottom Bracket Tool
Feature
The bbt-9 is used to remove and install shimano hollowtechOne end of the BBT-9 securely engages the 16 notches of the bottom bracket cups
BBT-9 works with many external bearing crankset bottom brackets, including: Shimano Hollowtech II,Campagnolo Ulta-Torque and Power Torque
The BBT-9 works with many external bearing crankset bottom brackets, including: Race Face, FSA, SRAM, Truvativ, Chris King
Description
The BBT-9 is used to remove and install external bearing crankset bottom brackets. One end of the BBT-9 securely engages the 16 notches of the bottom bracket cups. The other end of the tool engages the 8 internal splines of the crank arm adjustment cap. The BBT-9 fits cups and lockrings with 16 external notches and an outside diameter of approximately 44mm.3. Park Tool BBT-10.2 Adjusting Cap Tool
Feature
Removes and installs crank caps on Shimano Hollowtech II cranksIncludes built in hook to lift the safety plate
teel, investment cast body provides good leverage
Description
Removes and installs crank caps on Shimano Hollowtech II cranks. Includes built in hook to lift the safety plate, speeding crank removal. Steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for removing seized caps.4. Fantasy Life Bicycle Bottom Bracket Wrench Spanner For Shimano Shimano Hollowtech II - Mountain Bike Repair Tool
Feature
Fits for Shimano Hollowtech II.DO NOT FIT: BBR60 Ultegra
FLEXIBLE: It is long enough to give you adequate leverage for installing and removing BB with the force you need.
NEW DESIGN: The black wheel located at the handle end of the tool is for removing the plastic cover at the base of the non-driveside crank arm.
HIGH QUALITY: Made of high-carbon steel, Long time high temperature hardening heat treatment, Durable.
Description
Fantasy Life Bicycle Bottom Bracket Wrench Spanner is for installing and removing Shimano Hollowtech II.
If your bike uses the Shimano Hollowtech II external bottom bracket system, this is the perfect tool you will need to service it.
It is particularly true for your mountain bikes equipped with Shimano Hollowtech II.
That utilize the Hollowtech II system from about 2003.
The bottom bracket wrench have 12 teeth goes over halfway around the bracket.
This tool can help you to clean the bottom bracket, adjust the cups or replace bearings easily.
The other end of the tool has the hard plastic bit needed to tighten the crank arm adjustment cap.
The wrench is made of high-carbon steel, Long time high temperature hardening heat treatment, Durable.
Please kindly be noted that this tool is for the original Shimano Hollowtech Bottom Bracket cups.
Dimension:
Diameter: 45mm(1.77inch), Total length: 220mm(8.67inch).
5. Park Tool Adjusting Cap Tool
Feature
The BBT-10 is a shop quality tool designed to remove and install the adjusting caps on Shimano Hollowtech II crank/bottom braket systemMade from invetment cast steel the BBT-10 provides the strength and leverage needed to remove seized caps
Description
- Material: Steel
6. SHIMANO TL-FC32 Bottom Bracket Tool Hollowtech II
Feature
Spanner styleFor Hollowtech II
Shimano Reference Number: TL-FC32
Description
Shimano Spanner style Hollowtech II removal/installation tool.7. Bikehand Bike Bicycle Shimano Bottom Bracket Removal Remover Tool
Feature
Bikehand Bikehand Bike Bicycle Shimano Bottom Bracket Removal Remover ToolDescription
To remove or install BB for Traditional Tapered, Shimano Octalink, ISIS SplinedGreat quality ensures that it will not damage the BB teeth
Made in Taiwan
One year warranty
8. Crank Bottom Bracket Plug Arm Installation Tool For Shimano HollowTech II
Feature
Will fit the end cap on Hollowtech II cranks.Used to preload the bearing tension on Hollowtech II (outboard bearing) cranks & bottom brackets.
Size:4cm x 4cm .
Package Included: 1 x Shimano Installation Tool
NO Retail Box. Packed Safely in Bubble Bag.
9. Shimano bike tools crank-tool TL-FC16
Feature
Shimano Hollow Tech Ii C/Arm Install Workshop Tool - BlackN/A
Description
Designed specifically for the removal and installation of Hollow Tech II chain sets and Bottom brackets;Shimano II Crank Arm Bolt Tool TL-FC16;Crank installation tool for II10. Park Tool (109917) HCW-5 Lock Spanner
Feature
Double sided bottom bracket lockring hook spannerOne side is a single hook, the other is a hook spanner with 3 notches for better engagement in the lockrings
The three-hook end will fit 3-notch lockrings with a maximum outside diameter of 46mm, and minor diameter (in the notches) of 40mm
NOTE: The HCW-5 is designed for bottom bracket lockrings. For fixed gear lockring, use the HCW-17
Recent Comments