Best rf amplifier ham radio list
We spent many hours on research to finding rf amplifier ham radio, reading product features, product specifications for this guide. For those of you who wish to the best rf amplifier ham radio, you should not miss this article. rf amplifier ham radio coming in a variety of types but also different price range. The following is the top 10 rf amplifier ham radio by our suggestions:
1. 10 ft Low-Loss Coax Extension Cable (50 Ohm) - SMA Male to N Male - for 3G/4G/LTE/Ham/ADS-B/GPS/RF Radio to Antenna or Lightning Arrester Use (Not for TV or WiFi)
Feature
N Male to SMA Male Jumper CableConnect from SMA Equipment to N-Style Antennas
10 ft Low-Loss LMR195 Size Coax
Gold Plated Signal Pins - Heat Shrink on Both Ends
Compatible with all SMA-based equipment including modems and routers from Cisco, Cradlepoint, Digi, Pepwave, Proxicast, Sierra Wireless, Sixnet/Red Lion and many others.
Description
Coaxial extension cable made of low loss LMR195 sized coax cable.Use to connect SMA radio sources such as modem, routers, etc. to the female N connector found on many external fixed mount antennas (e.g. Yagi, directional panel, sector, fiberglass omni-directional).
Thin, flexible, light-weight 195-sized coax makes installation easier, especially for tight bends.
Specifications
Connector 1: SMA Male (Inline Plug) - Gold Plated
Connector 2: N Male plug - Chrome Plated with Gold Plated Pin
Length: 10 feet
Coax: Low-loss LMR195 size (0.195 inch diameter)
Impedance: 50 ohm
NOT for use with Wi-Fi (RP-SMA) or video (cable/satellite/CATV) devices
Proxicast's coax extension cable assemblies are constructed with top quality extremely low-loss cable and gold plated connectors. Each cable assembly is fully tested. Proxicast recommends LMR195 coax for assemblies up to 10 ft, LMR240 for lengths up to 25 ft and LMR400 for lengths up to 75 ft.
RF Connectors
SMA Female jacks are commonly used on 3G/4G/LTE cellular modems, routers and signal amplifiers - check with your equipment manufacturer.
Many indoor cellular antennas have SMA Male connectors; most outdoor antennas have either N-Male or N-Female connectors.
RP-SMA (Reverse Polarity) connectors are commonly used on Wi-Fi equipment. SMA and RP-SMA connectors will not mate.
Video equipment (cable, satellite, TV, etc) uses "F" connectors - which look similar to SMA but they will not mate with SMA connectors.
See the photo gallery above for pictures of the exact connectors on this coax extension cable and note the gender of the connectors you need to ensure male-to-female mating.
All outdoor connections should be weather-proofed to minimize moisture in the cabling. Use our Self-Bonding silicone tape (ASIN B00K5GW67O) for fast and easy connection sealing.
2. Doradus 500MHZ HF FM VHF UHF RF Power Amplifier With Heatsink For Ham Radio
Feature
500MHZ HF FM VHFUHF RF Power Amplifier
Electronics
Please Allow 7-23 Business Days For Delivery
Package Contains One Item
Description
500MHZ HF FM VHF UHF RF Power Amplifier With Heatsink For Ham Radio Feature: Broadband RF power amplifier, for a variety of wireless applications, shortwave, FM, remote control toys 315MHZ, 433MHZ, radios, digital radio and so on, enter 1 mW output 1.6 watt, 12V power supply Specifications: Size: 5.5 x 4 x 1.6cm Operating Frequency: 1MHz - 500MHz Input power: 0dBm Output Power: 32dBm, 0.7 to 1 watt high frequency Operating voltage: 12V Working Current: 0.3A Harmonic Suppression: Typical low-end frequency -12dBc, high-frequency -20dBc typ Input and output use SMA female, with good heat sink, long-term stability. More detailed operation, refer to this link: http://v.youku.com/v_show/id_XODMzMDk0MDA4.html Package included: 1 x Power Amplifier3. Toogoo 1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier For Ham Radio
Feature
Application:Broadband RF power amplifier for all types of wireless applications, FM shortwave radios remote control toys, digital radio, etc., enter 1 milliwatt (0DBM) maximum output of 3 watts, 15V voltage supply, broadband work 1MHZ to 700MHZ can be work. As a result of well-designed, low end that can reach 35DBM (3W), at 500M, the output power can reach 32DBM (1.6W), please refer to the specific parameters S21 and point frequency test chart.
Amplifier size 37MM * 56CM * 1.5CM (behind with a large heat sink).
color: green
Material: metal
Description
* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration.TOOGOO(R) 1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier For Ham Radio
Technical indicators:
1.supply voltage: + 15V DC (typical current 450mA / gain maximum output)
2.the operating frequency: 1MHZ-700MHZ, input and output impedance: 50 ohms
3.the maximum output amplitude: 35dbm (3.2W / 50 Ohm)
4. Gain: 35 dB (see specific curves S21 curves, different frequencies are different)
5.the input signal Size: low frequency (0DBM / 1 mW), high frequency (2DBM)
Note:
Do not power it when there is no signal input or output is not connected to load.
Package included:
1 x 1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier For Ham Radio
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
4. Ham It Up Plus - HF/MF/LF/VLF/ULF Upconverter w/TCXO & Separate Noise Source Circuit. Fully Assembled in Custom Metal Enclosure. Extends the Frequency Range of Your Favorite Radio Down to 300Hz.
Feature
A high-quality RF (ULF/VLF/LF/MF/HF) converter for software defined radio devices like our NESDR series (RTL-SDR) and the HackRF--extends your radio range down to 300HzThe Ham It Up Plus is fully assembled in a custom, black, aluminum enclosure, tested, and ready to use. Includes SMA to SMA connector to attach the output to your radio, and an SMA to BNC antenna adapter.
A separate noise source circuit is included for testing and calibration of various RF devices
Proudly made in the USA and Canada! Full 2 year product warranty, directly through NooElec
Ham It Up Plus has all the same fantastic features as the popular Ham It Up (v1.3), and shares an identical form factor to ensure compatibility with optional enclosures and Ham It Up addons (available separately)
Description
For full product details and specifications, please visit the product page at nooelec.com
Major differences vs. Ham It Up v1.3:
- A 125MHz TCXO, custom built for exclusively for NooElec by our Japanese partner, is included and pre-installed, providing more accurate and stable tuning in any environment
- Ultra-low distortion ceramic capacitors, custom built exclusively for NooElec by our Taiwanese partner, allowed us to extend the range of the Ham It Up Plus all the way down to 300Hz
- The separate noise source circuit is fully assembled, which can be used for a number of RF projects, including calibration and tuning of filters, amplifiers and attenuators
- Form factor was kept identical to the Ham It Up, which means the same enclosure can be used (note a new end panel may be required to accommodate the additional SMA connector of the noise source circuit)
Operation:
- Connect your antenna to the RF input
- Connect your SDR to the IF output
- Ensure your toggle switch is in the enable position
- Plug your USB power source into the USB-B USB jack
- Fire up your favorite SDR software. Tune to 125MHz + (+/- the tuning offset from the tuning procedure) + your desired frequency and enjoy!
5. Estink RF Amplifier, LNA 50-4000MHz SPF5189 RF Amplifier Signal Receiver for FM HF VHF/UHF Ham Radio
Feature
ApplicationLNA for the main mobile communication base station infrastructure applications, such as wireless communication transceiver card, tower mounted amplifier (TMA), combiner, Repeaters, and distal/digital wireless wide band end equipment applicatGenerally UsedUsed as a high frequency or intermediate frequency preamplifier for a wide range of radio receivers, as well as amplifying circuits of highly sensitive electronic detection devices
Low NoiseIn the case of amplifying weak signal, the noise of the amplifier itself may be very serious, so it is hoped that this noise will be reduced to improve the signal-to-noise ratio of the output
LNAThis RF Amplifier features low noise figure, is a LNA RF Amplifier.
Specific InformationThis RF low noise amplifier LNA is 50-4000MHz, NF = 0.6dB
Description
Features:
ThisRF Amplifier features low noise figure, is a LNA RF Amplifier.
Generally used as a high frequency or intermediate frequency preamplifier for a wide range of radio receivers, as well as amplifying circuits of highly sensitive electronic detection devices.
In the case of amplifying weak signal, the noise of the amplifier itself may be very serious, so it is hoped that this noise will be reduced to improve the signal-to-noise ratio of the output.
Application: LNA for the main mobile communication base station infrastructure applications, such as wireless communication transceiver card, tower mounted amplifier (TMA), combiner, Repeaters, and distal/digital wireless wide band end equipment application design.
This RF low noise amplifier LNA is 50-4000MHz, NF = 0.6dB.
Specifications:
LNA: 50-4000mhz
NF: SPF5189Z
LNA0: 0.6 dB
Amplifier: FM
Size: 34 x 25mm/1.33 x1.0inch
Weight:10g
Package Included:
1 x LNA 50-4000MHz SPF5189 RF Amplifier
6. Toogoo 1MHz-1000MHZ 35DB 3W HF VHF UHF FM Transmitter Broadband RF Power Amplifier For Ham Radio
Feature
Application:This Broadband RF power amplifier, suitable for all kinds of radio, FM radio remote control toy, radio and so on, the input of 1 MW (0DBM) maximum output of 3 watts, 15V voltage power supply, broadband 1MHZ to 1000MHZ can work. Because of the excellent design, in low frequency can reach 35DBM (3W), when 500M the output power can reach 32DBM (1.6W).
Power amplifier size 37MMx56CMx1.5CM (behind with a large heat sink)
color: green
Material: metal
Description
* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration.TOOGOO(R) 1MHz-1000MHZ 35DB 3W HF VHF UHF FM Transmitter Broadband RF Power Amplifier For Ham Radio
Technical indicators:
1. Supply voltage: + 15V DC (typical current value 450mA / maximum gain output)
2. The working frequency: 1MHZ-1000MHZ, input and output impedance: 50 ohms;
3. The maximum output range: 35dbm (3W / 50 ohms)
4. Gain: 35 dB (see the specific curve S21 curve, there are differences between different frequency)
5. The input signal size: low frequency band (0DBM / 1 mW), high frequency band (2DBM)
Package included:
1 x 1MHz-1000MHZ 3W HF VHF UHF FM transmitter RF Power Amplifier
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
7. Low Noise Amplifier,1pc Low Noise Amplifier LNA 50M-4GHz NF=0.6dB RF FM HF VHF / UHF Ham Radio -110dBm
Feature
LOW NOISE:This is a ultra low noise, high linearity low noise amplifier moduleADVANTAGE :It has 0.6dB typical noise factor, 19dB typical gain, 23dB P1dB
USED FOR:Can be used for high dynamic range receiver LNA application, and amplify small signal of 110dBM
STRENGTH:You can cascade several LNA modules in order to improve gain
WIDELY USED:Generally used for high frequency or intermediate frequency preamplifier of radio receiver, and high sensitivity amplifying circuit of electronic detection equipment, as well as transceiver wireless communication card, tower mounted amplifier (TMA), comb
Description
Features:
This is a ultra low noise, high linearity low noise amplifier module. It has 0.6dB typical noise factor, 19dB typical gain, 23dB P1dB. Can be used for high dynamic range receiver LNA application, and amplify small signal of 110dBM. You can cascade several LNA modules in order to improve gain. Generally used for high frequency or intermediate frequency preamplifier of radio receiver, and high sensitivity amplifying circuit of electronic detection equipment, as well as transceiver wireless communication card, tower mounted amplifier (TMA), combiner, repeaters, and distal/digital wireless broadband head equipment, etc.
Specifications:
Typical Voltage: +5V
Typical Current: 90mA
Gain: [email protected]
Input/Output Impedance: 50
Max. Output Power: P1db 22dBm(@2GHz)
Input Signal: <+10dBm(as low as -110dBm. If input >+10dBm, output is distorted)
Bandwidth 0.05-4GHZ(differs at different frequency, refers to S21 curve)
Noise Factor: [email protected]
Weight: 40g(approx.)
Package Includes:
1 x LNA
8. 5-3500MHz Broadband 20 dB High Gain LNA Low Noise RF Amplifier Module Ham Radio with Shielding Shell for Shortwave FM TV Audio
Feature
This amplifier has a wide frequency range of 5-3500MHz, and large dynamic range +20dBm@1dBPIt has stable gain 20dB typical, and small noise figure 1.3dB typical
The broadband low noise RF amplifier is designed with shielding shell
It is especially suitable for all kinds of radio frequency receiving front-end circuit to extend communication distance
Widely used for short wave, FM radio, remote control receiver, cable TV signal amplifier, GPS satellite navigation, 2.4G bluetooth and WIFI receiver RF front-end that need low noise small signal RF to be amplified
Description
High Quality LNA RF Amplifier Module Ham Radio for Electronics DIY.
This amplifier module features wide frequency range of 5-3500MHz, large dynamic range of+20dBm@1dBP, stable gain 20dB typical and small noise figure 1.3dB typical.
Well designed andcrafted from quality circuit board with exquisite workmanship. This amplifier is the combination of neat layout and stable performance. Ideal for ham radio hobbyists or school, science education.
Specifications:
Working Frequency: 5-3500MHz
Gain: 20dB(typical)
Noise Figure: 1.3(typical)
Max. Output Power: +20dBm (100mW)@1dB compression point
Working Current: 80mA (5V)
Power Supply Voltage: 3.3-6VDC
System Impedance: 50
Connector: SMA
Test Data:
F=5Mhz gain=23dB
F=30Mhz gain=23dB
F=100Mhz gain=23dB
F=150Mhz gain=23dB
F=420Mhz gain=22dB
F=1500Mhz gain=20dB
F=3000Mhz gain=18.7dB
F=3500Mhz gain=17.6dB
Package Includes:
1 x Amplifier Module
9. HYS UHF 400-470MHz Ham Two Way Radio Power Amplifier 30W RF Radio Amplifier for Icom/Kenwood/Baofeng BF-888s/Retevis H-777/Motorola Digital/Analog RF Walkie Talkie
Feature
RF Radio Amplifier: Frequency: UHF 400-470MHz(70cm)Operate Power: DC 13.8V-12V (15% Operate current: 4.0-5.5A
Input Power: 2-6 watts Output power :20-25 Watt( MAX 30 watt)
Great performance , compact design, solid quality, works great for your UHF handheld ham radio like Icom, Kenwood, TYT, Baofeng BF-888s, Retevis H-777, Yaesu/Vertex Motorola Digital/ Analog RF walkie talkie
Package include 1* UHF 25W Two way radio power amplifier. 1* Bracket 1* BNC female to MOTOROLA radio antenna plug adapter And 3* 1 meter adapter extension cable(SMA-Male to SMA-Male/ SMA-Male to SMA-Female/SMA-Male to BNC) Please NOTE: Any question about the product, please feel free to email us.
Description
Brand: HYSModel: TC-AP01U
100% Brand new.
HYS TC-AP01U Two way radio amplifier: Amplify your low power handheld UHF radio to 30W, Increase the communication distance bring you more clear communication experience. Easy operation.
This RF radio amplifier can be used on digital and analog RF walkie talkies , it can be used on most FDMA digital walkie talkie such as YAESU C4FM KENWOOD D-STARICOM/KENWOOD NXDNICOM IDASdPMR digital walkie talkieAmerican Public Security P25 MPT1327 system ,etc.
There built-in a speaker inside this amplifier, which need to work with a microphone and a audio control cable. If you need the MIC and audio control cable, please email us your radio model and your radio earphone jack type.
Please Note: This amplifier need to work with antenna which has SL 16-J connector. And more important, antenna need to fit the frequency of the amplifier, please connector the right frequency antenna before operation.
Specification
Frequency: 400-470MHz (UHF/70cm)
Supply power: 13.8V-12V
Operate current: 4.0-5.5A
Two way radio input power: 2-6 watts
Amplifier output power: 20-25 watts. Max 30 watt (Output power depends on input power and operation)
Great performance , compact design, solid quality, works great for your 400-470MHz UHF handheld ham radio like Icom, Kenwood, TYT, Puxing, Baofeng, Retevis Motorola etc. Digital/ Analog RF walkie talkie
Dimension:135mm *1115mm * 35mm
Weight : 800g.
Package include:
1* TC-AP01U two way radio amplifier
1* Bracket( two screws)
1* SMA-Male to SMA-Male Adapter cable(1 meter)
1* SMA-Male to SMA-Female Adapter cable(1 meter)
1* SMA-Male to BNC Adapter cable(1 meter)
1* BNC female to MOTOROLA radio antenna plug Adapter
10. GOTOTOP LNA 50-4000MHz SPF5189 RF Amplifier Signal Receiver for FM HF VHF/UHF Ham Radio
Feature
This RF Amplifier features low noise figure, is a LNA RF Amplifier.Generally used as a high frequency or intermediate frequency preamplifier for a wide range of radio receivers, as well as amplifying circuits of highly sensitive electronic detection devices
In the case of amplifying weak signal, the noise of the amplifier itself may be very serious, so it is hoped that this noise will be reduced to improve the signal-to-noise ratio of the output
Application: LNA for the main mobile communication base station infrastructure applications, such as wireless communication transceiver card, tower mounted amplifier (TMA), combiner, Repeaters, and distal/digital wireless wide band end equipment applicat
This RF low noise amplifier LNA is 50-4000MHz, NF = 0.6dB
Description
Specifications:
LNA: 50-4000mhz
NF: SPF5189Z
LNA0: 0.6 dB
Amplifier: FM
Size: 34 x 25mm/1.33 x1.0inch
Weight:10g
Package Included:
1 x LNA 50-4000MHz SPF5189 RF Amplifier
Recent Comments