Best moisture meter restoration kit for 2019
If you looking for moisture meter restoration kit then you are right place. We are searching for the best moisture meter restoration kit on the market and analyze these products to provide you the best choice.
1. Extech MO280-KW Water Damage Restoration Kit
Feature
Specifically designed for water damage restoration contractorsMonitor job site conditions, progress and insurance company reporting
Supplied in attractive storage case
Includes MO280 Pinless Moisture Meter and the MO210 Pocket Moisture Meter
Includes the RH490 Precision Hydro Thermometer
Description
Water Damage Restoration Kit
The MO280-KW is specifically designed for water damage restoration contractors. Monitor job site conditions, progress, and insurance company reporting. Kit includes an MO280 Pinless Moisture Meter that displays 0 to 99 percent moisture levels (select from 10 wood types) detected from a surface depth up to 0.75 inches with virtually no surface damage; a MO210 Pocket Moisture Meter that measures moisture in wood or other building materials and displays readings on a large dual graphical LCD with both digital readout and analog bargraph; and an RH490 Precision Hygro-Thermometer with 2 percent RH accuracy and fast 30-second RH response time. The RH490 measures Humidity, Temperature, Dew Point, Wet Bulb, GPP (grains per pound) and g/kg (grains per kilogram). Kit is supplied in a storage case that protects and organizes the testers whenever they are needed.
More Extech Instruments to Choose From
MO280 Pinless Moisture Meter
Non-invasive measurement to monitor moisture in wood and other building materials with virtually no surface damage. Select from 10 wood types and measurement ranges. Measurement depth to 0.75 inches (22mm) below the surface. LCD displays percent of moisture of wood or material being tested. Additional features include: 0 to 99 percent measurement range (limited by wood type), automatic internal test and calibration, electro-magnetic testing technology and low battery indicator. Complete with 9-volt battery, pouch case, and user manual.
MO280-KH Home Inspector Kit
Specifically designed for home inspection professionalsaids in identification of moisture, HVAC, electrical and hot water system issues. Kit includes an MO280 Pinless Moisture Meter that displays 0 to 99 percent moisture levels (select from 10 wood types), with a surface depth to 0.75 inches and virtually no surface damage; 42500 Min infrared thermometer measures from -4 to 500 degrees F (-20 to 260 degrees C); an ET10 GFCI Receptacle Tester tests for faulty wiring in three wire receptacles and detects five wiring faults, and a 39240 Waterproof Stem Thermometer that measures temperature from -40 to 392 degrees F (-40 to 200 degrees C). Kit is supplied in an attractive storage case that provides protection and organization for the testers whenever they are needed.
2. General Tools KT100 Restoration Kit with IRT, Moisture Meter and Stud, Metal and Voltage Detector
Feature
Ideal for restoration and renovation specialist3-In-1 Stud/Voltage/Metal Detector
IRTC50 - Scanning IR Thermometer
Pinless Moisture Meter
Includes Soft Carrying Case, 3 9V Batteries, 3 User's Manuals and 1-Year limited warranty
Description
General Tools & Instruments KT100 Restoration Kit with IRT, Moisture Meter and Stud-Metal-Voltage Detector is ideal for restoration and renovation specialist. Includes 3-in-1 Stud/Voltage/Metal detection, IRT, Pinless Moisture meter. Kit includes Soft Carrying Case, 3 9V Batteries, 3 User's Manuals and 1-Year limited warranty.GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, were proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.
For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.
WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS
3. Extech MO290-RK Water Restoration Contractor Kit
Feature
Supplied in a rugged hard carrying caseA complete solution for restoration contractors
Use combination moisture meter/thermal hygrometer to capture all ambient conditions as well as moisture levels in one meter
Includes essential probes to measure moisture levels
Use USB humidity and temperature datalogger for GPP calculations
Description
Water Restoration Contractor Kit
The Extech MO290-RK Water Restoration Contractor Kit includes the MO290 moisture meter for measuring moisture in various wood types and building materials, as well as monitoring a variety of key ambient conditions. The kit also includes a variety of probes for checking moisture levels in hard wood, under baseboards, in between walls, and under plywood subflooring.
Kit Overview
The MO290-RK kit includes an MO-P1 pin probe, MO290-HP hammer probe, MO290-EP deep wall probe and an MO290-BP baseboard probe for all contact moisture readings. MO290 also incorporates a pinless sensor that detects moisture in wood and building materials with virtually no surface damage, as well as a built-in IR thermometer for taking non-contact temperature readings.
What's in the Box
The MO290-RK includes the RHT10 USB Humidity and Temperature datalogger with RHT10-SW software for GPP (g/kg) calculations. The MO290's built-in sensor measures Air Temperature, Relative Humidity, GPP (grains per pound), Dew Point and Vapor Pressure. The kit includes a carry case, 9-volt battery, and user manual.
More Extech Instruments & Accessories to Choose From
View larger
Pinless Moisture Psychrometer + IR
The Extech MO290 is an 8-in-1 meter that combines a pin/pinless Moisture Psychrometer with a built-in infrared (IR) thermometer. This pinless moisture sensor allows users to measure moisture in various types of wood and building materials with virtually no surface damage. The remote pin-type probe can be used for contact moisture readings in hard-to-reach areas. The meter has an easy to read, large dual display screen with a back light feature that can be used in dimly lit areas. It simultaneously displays percentage of moisture in wood or material being tested and air temperature, IR temperature, or humidity. Pinless moisture measurements can read to a depth of 0.75-inch below the surface. The non-contact IR thermometer has an 8:1 distance to spot ratio and 0.95 fixed emissivity. The built-in humidity and temperature probe measures relative humidity, air temperature plus grains per pound (GPP), dew point (DP), and vapor pressure. Additional features include programmable high or low moisture and humidity alarms, automatic calculation of differential temperature to determine condensation point, minimum/maximum function, data hold, and an auto power off function. Comes complete with a pin moisture probe (MO-P1), one 9-volt battery, carrying case, and user manual. Optional specialty moisture probes are available.
View larger
Pinless Moisture Psychrometer + IR
The Extech MO295 is an 8-in-1 meter that combines a pin/pinless Moisture Psychrometer with a built-in infrared (IR) thermometer. This pinless moisture sensor allows users to measure moisture in various types of wood and building materials with virtually no surface damage. The remote pin-type probe can be used for contact moisture readings in hard-to-reach areas. The meter has an easy to read, large dual display screen with a back light feature that can be used in dimly lit areas. It simultaneously displays percentage of moisture in wood or material being tested and air temperature, IR temperature, or humidity. Pinless moisture measurements can read to a depth of 0.75-inch below the surface. The non-contact IR thermometer has an 8:1 distance to spot ratio and 0.95 fixed emissivity. The built-in humidity and temperature probe measures relative humidity, air temperature plus grains per pound (GPP), dew point (DP), and vapor pressure. Additional features include store/recall 20 readings in memory, fast analog bargraph for viewing moisture trends, programmable high or low moisture and humidity alarms, automatic calculation of differential temperature to determine condensation point, minimum/maximum function, data hold, and an auto power off function. Comes complete with a pin moisture probe (MO-P1), one 9-volt battery and a carrying case. Optional specialty moisture probes are available.
View larger
Pinless Moisture Psychrometer + IR and Bluetooth
The Extech MO297 is an 8-in-1 meter that combines a pin/pinless Moisture Psychrometer with a built-in infrared (IR) thermometer and METERLiNK (Bluetooth) transmitter that wirelessly transmits moisture and humidity data to selected FLIR thermal imaging IR cameras to incorporate meter readings with thermal images. The pinless moisture sensor allows users to measure moisture in various types of wood and building materials with virtually no surface damage. A remote pin-type probe can be used for contact moisture readings in hard-to-reach areas. The meter has an easy to read, large dual display screen with a back light feature that can be used in dimly lit areas. It simultaneously displays percentage of moisture in wood or material being tested and air temperature, IR temperature, or humidity. Pinless moisture measurements can read to a depth of 0.75-inch below the surface. The non-contact IR thermometer has an 8:1 distance to spot ratio and a 0.95 fixed emissivity. The built-in humidity and temperature probe measures relative humidity, air temperature plus grains per pound (GPP), dew point (DP), and vapor pressure. Additional features include store/recall 20 readings in memory, fast analog bargraph for viewing moisture trends, programmable high or low moisture and humidity alarms, automatic calculation of differential temperature to determine condensation point, minimum/maximum function, data hold, and an auto power off function. Comes with a pin moisture probe (MO-P1), one 9-volt battery, and a carrying case. Optional specialty moisture probes are available.
MO290-EP
Extension Probe for Model MO265/290/295/297 Moisture Meters with 30-inch (76.2cm) cable and four pins
MO290-HP
Hammer Probe for Model MO265/290/295/297 Moisture Meters includes four pins (1.6-inch/4cm pin depth)
MO290-BP
Moisture Baseboard Probe for Model MO265/290/295/297 Moisture Meters (dual fixed flat pins with 4.1-inch/10.5cm pin length) with 30-inch cable
4. Extech MO280-RK Restoration Contractor's Kit
Feature
A complete solution for the restoration contractorUse pin and pinless meters to better diagnose the amount of moisture content
Thermal hygrometer provides fast and accurate readings of ambient room conditions
Supplied in a rugged hard carrying case
Includes the MO280, MO220, RH490 and the RHT10
Description
Extech MO280-RK Restoration Contractor's Kit; Includes: MO280 Pinless Moisture Meter, MO220 Wood Moisture Meter, RH490 Precision Hygro-Thermometer and RHT10 Humidity/Temperature USB DataloggerThe Extech MO280-RK Restoration Contractor's Kit is a complete solution for the restoration contractor. This kit uses pins and pinless meters to better diagnose the amount of moisture content in a certain material. The thermal hygrometer provides a fast and accurate reading of ambient room conditions and GPP calculations. The Extech MO280-RK Restoration Contractor's Kit also includes the RHT10 Humidity and Temperature USB Datalogger that records up to 16,000 readings each of RH and temperature. The USB interface and software is included in the kit.
Key Features- Model MO280 Pinless Moisture Meter
- Select from 10 different wood types
- Displays %moisture from 0 to 99%
- Measurement depth to 0.75" (22mm) below the surface
- Model MO220 Wood Moisture Meter
- Memory contains 8 wood groups with calibrations for approximately 170 species of wood
- Measures wood moisture from 6 to 99.9%
- Measurements can be taken using the integral pin electrodes or a heavy duty remote probe (included)
- Model RH490 Precision Hygro-Thermometer
- Measures Temperature, Humidity, Dew Point, Wet Bulb, Absolute Humidity, GPP (grains per pound/grains per kilogram)
- Less than 30 second RH response time with 2%RH accuracy
- Model RHT10 Humidity/Temperature USB Datalogger
- Datalogs 16,000 RH and 16,000 Temperature readings
- User-programmable sampling rate and alarm thresholds
- RHT10-SW software included for GPP calculations and USB interface for data download
- Kit is supplied in a rugged heavy duty hard carrying case that provides protection and organization for the meters and accessories whenever they are needed
5. Tramex WDMK5.1 Water Damage Restoration Master Kit
Feature
The CMEXII Measures up to 69% Moisture Content in ConcreteThe MEP has a Wide range of readings for wood from 5% to 30%
The ultimate Trammel kit for moisture testing of concrete & wood flooring and numerous other building materials such as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing
Description
The ultimate Trammel kit for moisture testing of concrete & wood flooring and numerous other building materials such as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. Featuring the Trammel MEP moisture meter for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. The Trammel CMEX II digital concrete moisture meter allows for testing per ASTM F2659 and the reusable Hygro-i probe for testing relative humidity, temperature and dew point in the environment, or performing ASTM F2170 (and ASTM F2420 with optional Hood) for relative humidity readings in concrete slabs. An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the Hygro-i probe. A heavy-duty pin-probes measures Moisture Content in wood. The Water Damage Restoration Master Kit comes in a protective heavy-duty carrying case with die-cut foam lining.
6. Tramex WDZK5.1 Water Damage Restoration Inspection Kit, MEP, CME4
Feature
Clear easy-to-read analog dialNo need to probe, drill or mechanically damage the surface
Instant and accurate readings deep into the surface. Non-destructive in operation
Description
A compact kit for instant and precise non-destructive testing of moisture conditions in numerous building materials such as concrete and other cementitious materials per ASTM F2659, as well as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. Featuring the Trammel MEP non-destructive overall building inspection moisture meter, and the Trammel CME4 concrete moisture meter. The Water Damage Restoration EZ Kit comes in a Trammel Easy-travel case.
7. Lignomat D-4P, Mini-Ligno DX/C Moisture Meter with E14 Electrode, 1 Pair Pins, 1 Kit
Feature
Price for 1 KitNote: This items comes with no retail packaging; shipped in a white box.
Description
Mini-Ligno DX/C Moisture Meter with E14 Electrode Includes: 1 mini-Ligno DX/C moisture meter 1 Electrode E14M with cable 1 pair EG pins 3/4 , teflon coated Pouch Applications For inspection, construction and restoration jobs. To check hardwood floors and subfloors, structural lumber, etc. Pin meters are the best option when deep measurements are necessary in the building envelope. Package D-4P will assist with all your moisture needs. Advantages The moisture meter is calibrated for domestic and tropical wood species (great for hardwood floors), but also has a percentage scale for drywall and a reference scale for other building materials. The slim Electrode E14 is designed to measure hard-to-reach corners, under base boards, around window frames. Handle is extendable to reach ceilings and floors easily. Features: Microprocessor-based circuitry assures calibration stability and - accuracy for the life-time of the meter. Calibration is internally - checked and adjusted before each reading. Measuring range is low enough to check hardwood floors (5%). Measuring range is high enough to evaluate wet lumber (65%). 42 Correction settings for domestic and tropical wood species - bamboo and drywall. Readings are given in percentages. Reference scale for concrete and other materials (0-99). Integral pins and connector for external cable built-in Fast, one-hand operation. Unique shape fits comfortable in your hand when measuring. Pocket-sized. Strap keeps meter handy and safe from being dropped. Green cap serves as gun-type grip for easy probe insertion and covers the pins during transportation. The slim E14M has an ergonomic design to measure hard to reach problem areas fast and easy. Teflon-insulated pins measure only at the tip. Handle can be extended.8. instecho Moisture Meter, Moisture Testers, LCD Display Digital Wood Moisture Meter for Wood | Sheetrock| Carpets(Orange)
Description
Instecho l
Our instecho digital Moisture Meter easily detects hidden leaks in wood,plaster,carpet,sub-flooring Providing accurate moisture level readings make this moisture meter great for new home inspections, locating roof leaks or even selecting dry lumber at the yard. Ideal to use in woodworking, building construction, agriculture restoration and floor-laying. Used to check wood, drywall and concrete before painting, sealing or treating and locate and identify water leaks in roofs, floors and walls. Features LED display, wide measuring range, strong stainless steel pins, audible alarms and battery status indication.
Specification:
- Manufactory/Brand: Sokos
- Testing Range 5% - 40%
- Digital large size LCD display
- Test Range: 5%-40%
- Accuracy: +/-1%
- Data held in memory for easy reading
- Powered by one 9V battery, and has a low-power indicator
- 2-pin or 4-pin sensor
- Ability to change the sensor pins based on application
- Dimension: 130Lx64Wx32H(mm)
- Small size, easy to operate and carry
Package Included:
- 1 x INSTECHO Moisture Meter
- 1 x INSTECHO Carry Bag
- 1 x Operating Manual
- 1 x 9V Battery (Not included)
9. Amphenol Thermometrics, Inc BLD8800-C-R Restoration Kit MMS2, Hammer Electrode, Accessories, Case
Description
Product Highlights- Easy-to-use
- Full Building Moisture Diagnostics
- Fast Responding Hygrometer Speeds up Building Surveys
- No Need to Always Plug in Multiple Accessories
- Intuitive User Interface with Color Screen
- Pin moisture measurement
- Ambient Relative Humidity and Temperature Measurement
- Equilibrium Humidity Measurement in Concrete Floors
- Psychrometric Calculations
- Laser Pointer Surface Non-Contact Temperature Measurement
- Data logging
- Firmware Upgradable
- Gross Weight Meter with battery 6.27 oz (178 gms)
- Dimensions (LxWxH) 7 in x 2.75 in x 1.9 in (180 mm x 70 mm x 49 mm)7 1/2 in. x 3 3/4 in. max
- Maximum Needle Depth 0.4 in (10 mm)
- Display Color LCD
- Batteries (Included) 1x9 V
- Warranty 24 months on mechanical or manufacturing defects. Does not include wearing part or accessories
- Moisture Measurement Range Pin (% WME) 8% to 99, readings over 30% are relative Non-invasive (RF) up to 3/4 in (19 mm) deep 60 to 1000 (relative)
- IR Surface Temperature Probe Range 15F to 120F (-10C to 50C)
- Hygrostick Data (Nominal) 30% to 40% RH (3% RH) at 68F (20C), 41% to 98% RH (2%) at 68F (20C), Range 32F to 122F (0C to 50C) 0.6F (0.3C)
- Quickstick Data (Nominal) 0% to 10% RH, 3% RH at 68F (20C), 10% to 90% RH, 2% RH at 68F (20C), 90% to 100% RH, 3% RH at 68F (20C), Range 32F to 122F (0C to 50C) 0.6F (0.3C) Nominal response 30% to 90% and back to 30% RH in 45 seconds @ 68F (20C)
- Data Storage Store up to 8000 results with date and time stamp from all instrument functions
- Batteries
10. Tramex WDIK5.1 Water Damage Restoration Inspection Kit, MEP, CMEX II, Hygro-I Probe, 8 Hole Liners, 7" Insulated Pins, IRTX Infrared Thermometer
Feature
The CMEXII Measures up to 69% Moisture Content in ConcreteThe MEP has a Wide range of readings for wood from 5% to 30%
A complete kit for moisture testing of concrete & wood flooring and numerous other building materials such as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing
Description
A complete kit for moisture testing of concrete & wood flooring and numerous other building materials such as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. Featuring the Trammel MEP moisture meter for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. The Trammel CMEX2 digital concrete moisture meter allows for testing per ASTM F2659 and the reusable Hygro-i probe for testing relative humidity, temperature and dew point in the environment, or performing ASTM F2170 (and ASTM F2420 with optional Hood) for relative humidity readings in concrete slabs. An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the Hygro-i probe. A heavy-duty pin-probe measures Moisture Content in wood. The Water Damage Restoration Inspection Kit comes in a protective heavy-duty carrying case with die-cut foam lining.
Recent Comments