Best digital clock kit diy for 2018
If you looking for digital clock kit diy then you are right place. We are searching for the best digital clock kit diy on the market and analyze these products to provide you the best choice.
1. WHDTS 4 Bits Digital Clock Kits with PCB for Soldering Practice Learning Electronics with English Instructions
Feature
The FR-4 PCB board including clear solder joints and components name, it equipped with STC11F02E master chip,easy to assemble and soldering.DC5.5*2.1 power port with 3-6V power supply, come along with a 3.5mm USB power cable, plug in the USB charger to use it.
Accurate travel time, the error range 1 sec every 24 hours. It can be enabled hourly chime; Twice alarm clock setting. Please check the instruction in the description part.
4 digit 0.56" red LED module which is specially for the led clock kit. 24 hour display format.
We are caring each of our customers' experience and ensure each if you is risk- free. Please feel free to contact us if you need any help.
Description
Description:STC11F02E-based of four electronic clock kit
Supply voltage: 3V ~ 6V
PCB Size: 52 x 42mm
Function:
Seconds correction (for precise School)
Switch to every minute independent display interface whole point of time (8-20 o'clock chime can be turned off)
Two alarm settings (you can turn off the alarm function)
Feature:
0.56 inch special red digital clock for display
Import STC11F02E for master chip
1.2mm thick PCB made from military grade FR-4 board
Accurate travel time, travel time error range error -1 to +1 seconds every 24 hours
Package included:
1 x Electronic Clock DIY Kits
1 x Manual
Kindly Reminder:
This produce is DIY kits- not the end product! We don't provide technical assistance please make sure you are familiar with the product before purchasing. Apologize in advance.
Download the material from drive.google.com/open?id=1JOMNnPveEFN3oqbzXZuKXpq9QICQ444x
2. DAOKI C51 4 Bits Digital LED Electronic Clock Production Suite DIY Kits Set
Feature
0.56 inch special red digital clock for displayImport AT89C2051 for master chip
1.2mm thick PCB made from military grade FR-4 board
Accurate travel time, travel time error range error -1 to +1 seconds every 24 hours
Description
Description:AT89C2051-based of four electronic clock kit
Supply voltage: 3V ~ 6V
PCB Size: 52 x 42mm
Function:
Seconds correction (for precise School)
Switch to every minute independent display interface whole point of time (8-20 o'clock chime can be turned off)
Two alarm settings (you can turn off the alarm function)
Feature:
0.56 inch special red digital clock for display
Import AT89C2051 for master chip
1.2mm thick PCB made from military grade FR-4 board
Accurate travel time, travel time error range error -1 to +1 seconds every 24 hours
Package included:
1 x Electronic Clock DIY Kits
3. WINGONEER 4-Digit DIY LED Electronic Clock Kit Microcontroller 0.8inch Digital Tube Clock with Thermometer Hourly Chime Function DIY Kit Module - Red
Feature
With written program, you can use it directly.Based on micro controller, precise timekeeping and mini in size.
Easy to set & adjust hour, minute, second ,date, week and hourly chime.
Can be used as thermometer to test and display temperature per 30sec.
Light control, the clock will automatically be brighter during the day than the night.
Description
WINGONEER trademark Reg.NO:4747611WINGONEER 4-Digit DIY LED Electronic Clock Kit Microcontroller 0.8inch Digital Tube Clock with Thermometer Hourly Chime Function DIY Kit Module
This is a quite fantastic DIY electronic clock. Based on micro controller, IC board and some electronic components, you can easily assemble and solder it quickly. With digital tube, you can watch time clearly no matter day time or at night. It is suitable for DIY enthusiasts, school training lessons etc. Why not not come and purchase one
Features:
With written program, you can use it directly.
Based on micro controller, precise timekeeping and mini in size.
Easy to set & adjust hour, minute, second ,date, week and hourly chime.
Can be used as thermometer to test and display temperature per 30sec.
Light control, the clock will automatically be brighter during the day than the night.
With transparent case, components can be well protected and the clock looks stylish.
Perfect for electronic DIY enthusiasts, school training lessons etc.
Note
1. It can work when blackout with a 3V lithium battery.(not included)
2. You need to solder it yourself.
3. Since its working voltage is DC 5V, thus can be powered through phone charger with a USB wire.
4. For more specific function and application method, please read our English user manual.
Specifications
Color Blue Green White Red (optional)
Display 4-digit LED
Power Supply 3V CR1220 Button Battery (not included)
Working Voltage DC 5V
Working Current 40mA
Clock Size 7 2.5 1.2cm 2.76 0.98 0.47in
IC Board Size 7.2 2.7cm 2.84 1.06in
Kit Weight 82g 2.9oz
Package Size 12 8.5 3.5cm 4.72 3.35 1.38in
Package Weight 85.5g 3.01oz
Package List
1 x DIY Electronic Clock Kit(Battery not Included)
4. KKmoon Compact 4-digit Digital LED Talking Clock DIY Kit Light Control Temperature Date Time Display Transparent Case (Green)
Feature
With transparent case, components can be well protected and the clock looks stylish.Digital talking clock DIY kit for electronics enthusiasts. Automatically display time, temperature, date and day.
Light control, the clock will automatically be brighter during the day than during the night.
C/F selectable for temperature, 12H/24H time display mode. Large 4-digit LED display, can show you the time clearly. Useful alarm function and hourly chime function.
Warm white nightlight function by long-press the voice key. With a power cable, it is convenient for clock power supply.
Description
With this digital talking clock DIY kit, you can make a nice clock by yourself. With transparent case, components can be well protected and the clock looks stylish.Display Modes
1. Time/temperature/date/week automatically display circularly.
2. Time/temperature automatically display circularly.
3. Only display the time.
Specifications
Display: 4-digit LED
Display Color: Blue / Green / White / Red (Optional)
Power Supply: DC 5V; 1 * CR1220 Button Battery for (NOT included)
Case Size: 11 * 4.5 * 3cm / 4.33 * 1.77 * 1.2in
PCB Size: 9.5 * 3.5cm / 3.7 * 1.4in
Package Size: Approx. 13 * 9 * 3.5cm / 5.12 * 3.54 * 1.4in
Package Weight: 141g / 4.97oz
Note
The button battery is just used for memorizing the time when powered off, not power the clock(use DC 5V).
The display color might be slight different in the picture because of the lighting effect, pls in kind prevail!
What is in the box
1 * Digital Talking Clock Kit
1 * User Manual (English)
5. KKmoon Compact 4 Digit DIY Digital LED Clock Kit Light Control Temperature Date Time Display with Transparent Case(Blue)
Feature
With transparent case, components can be well protected and the clock looks stylish.Light control, the clock will automatically be brighter during the day than during the night.
Ideal digital clock DIY kit for electronics enthusiasts, easy to install. Compact for installation, easier for welding and DIY by users.
Automatically display time, temperature, date and day. Large 4-digit LED display, can show you time and temperature.
Useful alarm function and hourly chime function. With a power cable, it is convenient to be charged.
Description
Note:The item color might be slight different in the picture because of the lighting effect, pls in kind prevail!
Specifications:
Display: 4-digit LED
Display Color: Blue / Green / White / Red (Optional)
Power Supply: 1 * CR1220 Button Battery (NOT included)
PCB Size: 9.5 * 3.5cm / 3.7 * 1.4in
Package Size: Approx. 12.5 * 8.5 * 4cm / 4.92 * 3.35 * 1.6in
Package Weight: 116g / 4.11oz
What is included:
1 * Digital Clock Kit(Battery Not Included)
6. SainSmart DIY-DS1302-Rotating-LED-Electronic-Digital-Clock-Kit-51-SCM-Learning-Board-5V-xp
Feature
PLUS key, for years, months, days, hours, minutes, seconds add operationAccording to the numerical sum 1 at a time
MODE key, can be in display clock, switch to the year, month, day, hours, minutes, alarm clock, the adjustment of outer ring LED display state
To use add key to the year, month, day, hours, minutes, seconds, and display mode to adjust
RST key, press the reset button, then the MCU reset
Description
Function:
1. Electronic clock function. Four digital tube display time function. Every second, digital tube, two points on a flashing, at the same time, the casing outside the clock LED will take turns to light up a take turns bright finish a circle represents the clock through a minute
2. Date display. Through the key switch, you can see the preset date.
3. Alarm function. Through the button switch, you can set the alarm clock function. When to set the alarm time, buzzer sounds, if not, manually turn off the buzzer will continue to ring for 10 minutes.
4. Burning function. The reserved buffer program interface, can change to the circuit board to do procedure, easy to operate
5. Real time clock function. Tone after a preset time, even if the power lost, again after power on
6. Temperature display function. Under the time display mode, press PLUS, can display the current temperature
7. Many mode display function. Outer LED display has four modes, can cooperate to add key implementation
Mode 0: is also the default display mode, all the 1-12 hours red digital tube light, when the clock through a second, is the green digital tube is take turns to light up a.
Mode 1: as the clock through a second, outer ring LED lit one by one, that is 60 seconds, outer ring all the LED light. The next minute, all leds light up, and through the clock for a second, put out one by one. And the next minute, leds light up one by one again, so alternates.
Mode 2: when the clock through a second, outer ring take turns to light up a LED. The first seconds, only the first LED light, 2 seconds only the second LED light.
Mode 3: when the clock through a second, outer LED turns off a. The first seconds, only the first LED out, only the second LED out 2 seconds.
Maunal:
https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-211-301/english.zip
7. DIY Digital Clock Kit 4 Digit LED Electronic Clock Kit Large Screen with Transparent Case LED White
Feature
Ideal clock kit for DIY fans and it can be a memorable gift.Easy to install with the English manual provided in the package.
Able to display time, temperature, date, week.
Hourly chime function.
Light-operated funcation is canncelable to be used as a night lamb.
Description
Parameter: 4 digit LED digital clock kit Working voltage: DC 5V Case material: Crystal transparent case Charging Method: Can be charged with the cell phone charger. PCB Dimension: 98 x 35 x 1.6 mm (LxWxH) Case dimension: 105 x 46 x 29 mm (LxHxD) Digit dimension: 1 inch Circuit: Welding assembly SCM process : The program is preloaded to be used directly. Feature: Work precisely,power memory,alarm function,the whole point timekeeping is cancelable at night. Package included: 1 DIY digital clock kit with transparent case and USB Cable. Note: 1.This item is for DIY which require the operator with some electronic basis and welding ability, since it needs to be set up by your own welding and installation. 2.English manual is included in the package as a installation guidance.8. OHTOP Electronic Clock, DIY Digital LED Electronic Clock Kit Learning Board Large Screen with Voice 4 Color (Red)
Feature
Close the night the whole point tips: can be setLight control function: Automatic micro-light at night
Temperature correction:can corrects temperature errors
Function: temperature, date, week displayed automatically(can set the display mode)
Product size: about 11*4.30*3.0cm/4.33 * 1.69 * 1.18inch.Power: 1pc x CR1220 Memory cell battery ( not included battery).
Description
Feature:Circuit installation is simple, high success rate, equipped with installation instructions and circuit diagrams,
About 30W electric iron, solder, diagonal pliers and other tools can be used to complete the production
Equipped With power supply line, you can use the phone charger power supply, does not have to re-set time after power off, with time memory function
Can automatically display the time,temperature,date, week.The night will automatically become micro-bright
Specifications:
Voltage:5V
Hourly Tip:Human voice
Color:Green,Red,White,Blue
Close the night the whole point tips: can be set
Light control function: Automatic micro-light at night
Temperature correction:can corrects temperature errors
Function: temperature, date, week displayed automatically(can set the display mode)
Alarm clock:yes
Filter film:yes
Night light function:yes
Power off memory function:yes
Whether it is equipped with a shell:yes
Whether it is equipped with power lines:yes
Power: 1pc x CR1220 Memory cell battery ( not included battery)
Product size: about 11*4.30*3.0cm/4.33 * 1.69 * 1.18inch
Package includes
1 x suite DIY kit
1 x Protective shell
1 x Filter film
1 x USB Charging line
1 x Memory battery
9. Kunhe DIY Digital Clock Kit 4 Digit LED Electronic Clock Kit Large Screen with Transparent Case LED Green
Feature
Ideal clock kit for DIY fans and it can be a memorable gift.Easy to install with the English manual provided in the package.
Able to display time, temperature, date, week.
Hourly chime function.
Light-operated funcation is canncelable to be used as a night lamb.
Description
Parameter: 4 digit LED digital clock kit Working voltage: DC 5V Case material: Crystal transparent case Charging Method: Can be charged with the cell phone charger. PCB Dimension: 98 x 35 x 1.6 mm (LxWxH) Case dimension: 105 x 46 x 29 mm (LxHxD) Digit dimension: 1 inch Circuit: Welding assembly SCM process : The program is preloaded to be used directly. Feature: Work precisely,power memory,alarm function,the whole point timekeeping is cancelable at night. Package included: 1 DIY digital clock kit with transparent case and USB Cable. Note: 1.This item is for DIY which require the operator with some electronic basis and welding ability, since it needs to be set up by your own welding and installation. 2.English manual is included in the package as a installation guidance.10. HiLetgo 0.56 Inch 4 Bit Red Digital Tube Electronic Clock DIY Kit Clock Electronic Production Suite Time Chip AT89C2051 FR-4 PCB for Students Science Electronics Learning Education
Feature
A good exercise for students in electronic productionWith second correction for precision calibration
Minute and second can be displayed independently
Two-Way alarm clock setting (can turn it off )
Time accuracy: error range 1 second per 24 hours
Description
0.56 Inch 4 Bit Red Digital Tube Electronic Clock DIY Electronic Production SuiteMain chip: AT89C2051
Power Supply voltage: 3V-6V
1.2mm thick high quality FR-4 PCB
PCB dimensions: Length 52mm * Width 42mm
With second correction for precision calibration
Minute and second can be displayed independently
8:00-20:00 point hours timekeeping (can close it)
Two-Way alarm clock setting (can turn it off )
Time accuracy: error range 1 second per 24 hours
With a USB to 3.5mm power cable, plug in the USB charger can be used, easy to power supply.
How to set it?
1. As your looking at the LCD there are two buttons under the screen. The left button is S1, the right button is S2. S1 advances the sub menus, S2 changes the value.
2.Hold S1 to enter clock setting mode
""A"" Set hour
""B"" (looks like the number 8 on the screen) Set minutes
""C"" Set Chime On/Off
""D"" Set Alarm 1 On/Off
""E"" Set Alarm 1 Hour
""F"" Set Alarm 1 Minute
""G"" Set Alarm 2 ON/OFF
""H"" Set Alarm 2 Hour
""I"" Set Alarm 2 Minute
Recent Comments