Best chip quik smd 1 list

We spent many hours on research to finding chip quik smd 1, reading product features, product specifications for this guide. For those of you who wish to the best chip quik smd 1, you should not miss this article. chip quik smd 1 coming in a variety of types but also different price range. The following is the top 6 chip quik smd 1 by our suggestions:

Product	Features	Editor's score	Go to site
	SMD1NL-SMD 1 REMOVAL KIT LEAD FREE CHIP QUIK		Go to amazon.com
	Chip Quik SMD1NL SMD 1 REMOVAL KIT LEAD FREE CHIP QUIK by ChipQuik		Go to amazon.com
	Fast Chip Kit for Quik SMD Removal with a Low Temperature Alloy		Go to amazon.com
	ChipQuik SMD-291 No Clean Flux in 10cc. (1 Ounce) Syringe with Nozzle		Go to amazon.com
	Soldering Flux TACK FLUX NO CLEAN 30CC SYRINGE		Go to amazon.com
	Chipquik SMD291AX10 Solder Paste Rework Syringe, SN63, 37Pb, 35 Gram		Go to amazon.com

Related posts:

1. SMD1NL-SMD 1 REMOVAL KIT LEAD FREE CHIP QUIK

Feature

Price For: Each

Description

SMD1NL-SMD 1 REMOVAL KIT LEAD FREE CHIP QUIK

2. Chip Quik SMD1NL SMD 1 REMOVAL KIT LEAD FREE CHIP QUIK by ChipQuik

Feature

Chip Quik SMD1NL SMD 1 REMOVAL KIT LEAD FREE CHIP QUIK

Description

RoHS Compliant, Pb Free;1cc Syringe;Includes Removal Alloy, Alcohol Pads, 1cc Syringe;Removes 8-10 SMDs;Chip Quik Lead-Free Alloy Melting Point: 79-91 Celsius (174-195 F)

3. Fast Chip Kit for Quik SMD Removal with a Low Temperature Alloy

Feature

The Fast Chip SMD Removal Kit is a quick and inexpensive way to remove SMD components from a PCB without a hot air station using only your soldering iron.
Removes QFP's, PLCC's, SOIC's, and chip components under 300 degrees Fahrenheit
Enough material to remove 8-10 SMD'S
The Kit Contains: 2.7 ft. Fast Chip Removal Alloy - 1 2cc tube of SRA TF5000 No Clean Rework Paste Flux and complete Instructions for SMD Removal and Cleanup

Description

The heart of the kit is a length of Fast Chip low temperature Removal alloy. This alloy is like a solder that melts at temperatures well below that of normal solder (136F) and stays liquid long enough to melt the existing solder, allowing you time to carefully remove the component. Simply apply a liberal amount of the included flux to the pins of the chip that you want to remove, then use a soldering iron with a flat-edge tip to heat the pins while applying the low temperature alloy. The alloy will remain liquid for a few seconds while you coat all of the connections, once you've coated the pins you should be able to lift the chip free using tweezers or a hemostat. Clean the pads thoroughly and apply fresh solder and you're ready to solder a new part in place.

4. ChipQuik SMD-291 No Clean Flux in 10cc. (1 Ounce) Syringe with Nozzle

Feature

Remove QFDs, PLCCs, SOICs and chip components without costly equipment
Use with existing rework equipment or temp controlled soldering irons
Special removal alloy has excellent wetting ability
Low melting temperature
Safe, affordable, easy and won't damage sensitive components

Description

Remove QFDs, PLCCs, SOICs and chip components without costly and complex equipment. Use ChipQuik with your existing rework equipment or temperature controlled soldering irons. Special removal alloy has excellent wetting ability with a low melting temperature of 136F (58C). To use: apply paste flux to all leads with syringe; melt ChipQuik alloy on all pins of SMD; with wide iron tip; maintain alloy in a molten state long enough to release chip; lift chip from board with pick-up tool. Safe, affordable, easy and won't damage sensitive components. NoClean Paste Flux; 10cc syringe with tip.

5. Soldering Flux TACK FLUX NO CLEAN 30CC SYRINGE

Feature

Chip Quik products use synthetic no clean flux, providing exceptional shelf life compared to natural rosin fluxes.
Flux: refrigerated >24 months, unrefrigerated >24 months
SnPb Solder Paste: refrigerated >12 months, unrefrigerated >6 months
SnBi Solder Paste: refrigerated >12 months, unrefrigerated >6 months
SAC305 Solder Paste: refrigerated >12 months, unrefrigerated >6 months

Description

Tack Flux no clean in a 30cc syringe w/plunger & tip. Low viscosity no-clean synthetic paste flux.

6. Chipquik SMD291AX10 Solder Paste Rework Syringe, SN63, 37Pb, 35 Gram

Feature

10Cc pack
Smd removal kit
Alcohol pads for cleaning

Description

This is a no-clean formula solder paste made specifically for leaded and lead-free rework and design. The 35 gram/10Cc syringe comes with a plunger and tip. The paste is 63 percent tin and 37 percent lead. 1 year shelf life refrigerated, 6 months at room temperature.

Conclusion

All above are our suggestions for chip quik smd 1. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using chip quik smd 1 with us by comment in this post. Thank you!