aem boost gauge buyer’s guide for 2018
We spent many hours on research to finding aem boost gauge, reading product features, product specifications for this guide. For those of you who wish to the best aem boost gauge, you should not miss this article. aem boost gauge coming in a variety of types but also different price range. The following is the top 10 aem boost gauge by our suggestions:
1. AEM 30-4406 -30-35 PSI Boost Gauge
Feature
Gauge pressure range -30-35psiComplete stand alone gauge requires no additional sensors or programs to operate
LED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions
Includes 0-5V analog output for routing to engine management system or data logger
Included bezels and face plates allow you to personalize the look of your gauge
Description
AEMs digital Boost display gauge delivers unsurpassed accuracy and visibility. Each gauge includes 24 color-coded (Red, Green, Yellow) LED lights that change from green to yellow to red for immediate reference to the measured parameter, and an integrated thee-digit display that reveals real-time operating conditions. AEMs digital display gauges feature a standard 52mm gauge housing that fits in most gauge pods and can be remotely mounted virtually anywhere. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gaugeits like having four gauge designs in one!2. AEM 30-4350 Tru-Boost Controller Gauge
Feature
Complete system includes harness, boost hose, on-board 29 psig pressure sensor (external 75 psia optional), boost solenoid, gauge display and all necessary fittingsTwo user selectable boost settings with peak boost memory
User selectable Overboost alarm includes two timed shutdown levels at 10% and 20% Overboost
No external interface required for programming!
User configurable gauge includes 24 scalable LEDs, and interchangeable bezel, pin guide and faceplate to customize look of display
Description
AEMs TRU-BOOST Gauge-Type Controller is an electronic boost controller that combines the simplicity of a manual boost controller with the added ease of adjusting boost levels through a gauge interface. There is no external interface required for set up, and it is fully functional right out of the box. There are no gimmicks or special software programs included. If you want more boost press the button on the right of the gauge face, and if you want less boost press the button on the left of the gauge face. Its that simple, and IT WORKS! AEMs TRU-BOOST Gauge-Type Controller includes everything you need, including an on-board 29 psig pressure sensor, built-in Overboost protection with two timed shutdown levels, a scramble boost setting and a low-side output for a warning light. AEM offers a 75 psia boost sensor for high boost applications (sold separately). AEMs boost control solenoid (included) is the only one specifically manufactured for automotive boost applications, which means it wont corrode and stick from exposure to rich fuel mixtures, it is pressure tested to 100 psi and includes -4 AN fittings to eliminate any chance of leaks.3. AEM 30-0306 X-Series Boost Pressure Gauge
Feature
2-1/16th (52mm) gauge diameter for easy mounting in gauge pods....Slim 0.825" overall gauge depth and 0.200" cup...
Programmable center LED is 87 larger than original AEM gauges....
Description
2-1/16th (52mm) gauge diameter for easy mounting in gauge pods.... Slim 0.825" overall gauge depth and 0.200" cup... Programmable center LED is 87 larger than original AEM gauges.... 24 green outer LEDs for quick reference to engine parameter.... User selectable standard or metric display ( -30in/Hg~35PSI / -1~2.5BAR)....4. AEM 2 Gauge Display Set UEGO WideBand Air/Fuel Ratio Gauge + Boost Pressure Gauge -30-35psi + MAPerfomrance Lanyard
Feature
2 popular AEM gauges in a convenient combo set.All gauges are brand new, complete in box.
Set Includes: AEM Wideband UEGO Air/Fuel Ratio Gauge 30-4110, AEM Boost Display Gauge (-30-35PSI) 30-4406, MAP Lanyard.
This gauge is easy to read, highly accurate, and controls its data by a digital LED display and LED needle that will change colors as the ratios change from rich to lean.
Complete stand alone gauges.
Description
2 popular AEM gauges in a convenient combo set. All gauges are brand new, complete in box.
Set Includes:
AEM Wideband UEGO Air/Fuel Ratio Gauge 30-4110
AEM Boost Display Gauge (-30-35PSI) 30-4406
This gauge is easy to read, highly accurate, and controls its data by a digital LED display and LED needle that will change colors as the ratios change from rich to lean. Utilizing a Bosch 4.9 LSU sensor.
Features:
Gauge Display/0-5V Output Gasoline values from 10 to 20:1 AFR
0-5V Output E85 values from 6.6 to 13.2:1 AFR
0-5V Output Ethanol values from 6.14 to 12.3:1 AFR
0-5V Output Methanol values from 4.4 to 8.8: AFR
Gauge Display/0-5V Output Lambda values from 0.68 to 1.36
Interchangeable black and white faceplates included for customizing gauge appearance (digital gauges only)
Bosch 4.9 LSU wideband sensor and weld-in bung included (PN 30-4110)
No free air sensor calibration required - ever
Interchangeable black and silver bezels included
Interchangeable black and white faceplates included
52mm (2-1/16) gauge housing
0-5v analog output (10-20 AFR range only)
AEM Boost Display Gauge (-30-35PSI) 30-4406
Features:
Gauge Readout from -30 to 35PSI
Includes easy-to-install harness and sensor
Complete stand alone gauge requires no additional sensors or programs to operate
Includes black and silver bezel and white and black faceplates
Ideal for both fuel injected and carbureted motors
LED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions
Boost gauge includes AEM 3.5BAR brass sensor
0-5v analog output included for use with data loggers and virtually any engine management system
5. AEM 2 Gauge Display Set - UEGO WideBand A/F Ratio Gauge (30-4110) + Boost Pressure Gauge (30-4406)
Feature
2 popular AEM gauges in a convenient combo set.All gauges are brand new, complete in box.
Set Includes: AEM Wideband UEGO Air/Fuel Ratio Gauge 30-4110, AEM Boost Display Gauge (-30-35PSI) 30-4406
Description
2 popular AEM gauges in a convenient combo set. All gauges are brand new, complete in box.
Set Includes:
AEM Wideband UEGO Air/Fuel Ratio Gauge 30-4110
AEM Boost Display Gauge (-30-35PSI) 30-4406
This gauge is easy to read, highly accurate, and controls its data by a digital LED display and LED needle that will change colors as the ratios change from rich to lean. Utilizing a Bosch 4.9 LSU sensor.
Features:
Gauge Display/0-5V Output Gasoline values from 10 to 20:1 AFR
0-5V Output E85 values from 6.6 to 13.2:1 AFR
0-5V Output Ethanol values from 6.14 to 12.3:1 AFR
0-5V Output Methanol values from 4.4 to 8.8: AFR
Gauge Display/0-5V Output Lambda values from 0.68 to 1.36
Interchangeable black and white faceplates included for customizing gauge appearance (digital gauges only)
Bosch 4.9 LSU wideband sensor and weld-in bung included (PN 30-4110)
No free air sensor calibration required - ever
Interchangeable black and silver bezels included
Interchangeable black and white faceplates included
52mm (2-1/16) gauge housing
0-5v analog output (10-20 AFR range only)
AEM Boost Display Gauge (-30-35PSI) 30-4406
Features:
Gauge Readout from -30 to 35PSI
Includes easy-to-install harness and sensor
Complete stand alone gauge requires no additional sensors or programs to operate
Includes black and silver bezel and white and black faceplates
Ideal for both fuel injected and carbureted motors
LED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions
Boost gauge includes AEM 3.5BAR brass sensor
0-5v analog output included for use with data loggers and virtually any engine management system
6. AEM 30-4900 Wideband Failsafe Gauge
Feature
Displays both boost or vacuum and AFR or Lambda simultaneously on the same gauge; no free air calibration required - ever; internal boost sensorBosch Wideband UEGO sensor and weld-in bung includedOn-Board 3+ hour Data logging capability at 20hz per parameterFull color Organic Light Emitting Diode (OLED) Display in center, user selectable feature (boost/vacuum or AFR)
24 three-color sweeping LEDs, user selectable feature (boost/vacuum or AFR) Intuitive set up software Interchangeable faceplates and bezels (see options, above)
Data analysis using AEMdata software
The system contains an on-board data logger for logging over three hours of data recording (20 Hz per parameter) of AFR, RPM, boost, alarm, and others. Data logs can be downloaded for viewing in the new AEMdata software
AEMnet compatible
Description
The Wideband Failsafe Gauge provides the ability to accurately tune AFR, while actively protecting your engine by constantly monitoring AFR curves and activating a user-defined Failsafe strategy if it runs lean. The Wideband Failsafe Gauge is a Universal Exhaust Gas Oxygen (UEGOyou-way-go) controller with an internal boost sensor, an internal data logger and a full color Organic Light Emitting Diode (OLED) display. It includes technology to activate a Failsafe strategy in the event AFR falls outside of a user-defined operating window. If the AFR falls outside of the set operating window, the Wideband Failsafe Gauge triggers a user defined output function that can save an engine from catastrophic damage. This product is a must have for all tuned performance engines, either forced induction or naturally aspirated, fuel injected or carbureted. Any high performance vehicle owners who want a highly accurate AFR tuning tool with logging and a protection strategy that can save an engine from catastrophic failure will want this Failsafe device. After the engine is tuned and a safe operating window of AFR is established, the Wideband Failsafe Gauge continually monitors AFR and boost or vacuum to make sure that AFR does not fall out of the defined operating window at a given boost or vacuum level. If the Wideband Failsafe detects an out of range AFR reading, the gauge triggers a low side output (ground signal with a 1.5 amp draw max) that can save your engine from catastrophic damage. Use the gauges intuitive software to configure the low side output, create a user-adjustable time delay strategy to prevent false alarms, and customize the gauge lighting to flash and alert the driver if an alarm is triggered.7. AEM (30-4110) UEGO Air/Fuel Ratio Gauge
Feature
Interchangeable black and white faceplates included for customizing gauge appearanceBosch 4.9 LSU wideband sensor and weld-in bung included PN 30-4110
No free air sensor calibration required ever. A 2-1/16 inch gauge housing ensures that it will fit in most gauge pods and can be remotely mounted virtually anywhere
Interchangeable black and silver bezels included
0-5V analog output 10-20 AFR range only
Description
Our World-famous Wideband O2 air/fuel ratio UEGO gauge features a digital LED display and sweeping LED 'needle' that changes colors as AFR changes from rich to lean. A 52mm (2-1/16") gauge housing ensures that it will fit in most gauge pods and can be remotely mounted virtually anywhere. All AEM digital gauges feature a 0-5V analog output for use with data loggers and almost any engine management system. Each gauge comes with black and silver bezels and black and white faceplates for multiple color combinations and a custom look (a black Lambda faceplate and black and white Air/Fuel Ratio faceplates). The Bosch UEGO sensor gives the controller its speed and accuracy. The Bosch 4.9 LSU sensor used in the AEM Wideband UEGO AFR Controller Gauge has a faster light off time and draws less current than the 4.2 LSU sensor used with AEM's 30-4100 Wideband UEGO Controller Gauge, which will be superseded to the gauge in August, 2014. The 4.9 LSU sensor features the same fuel compatibility as the 4.2 LSU and NEVER requires free-air calibration when used with AEM's Wideband UEGO AFR Gauge. The 4.9 LSU sensor uses a different connector than the connector used with the 4.2 LSU sensors included with the original 30-4100 gauge controller. The sensors are not interchangeable between the two gauge controllers in any way, including changing connectors on the gauges. The Wideband O2 air/fuel ratio UEGO gauge is a must if you want to maximize your engine's power and safety. When tuning an engine, accurate air/fuel ratio data is critical because running with too rich of an AFR can cause a loss of power, and running a lean AFR can result in serious engine damage. AEM's digital Wideband AFR UEGO gauge can quickly alert you to even a .1 change in air/fuel ratio and provide enough time to shut down an engine before damage occurs.8. AEM 52mm Gauge Combo Air/Fuel Wideband UEGO & Oil Pressure 150psi & Boost 30-35 w/MAP Lanyard Black
Feature
Our AEM three gauge kit is a popular combo for commonly used gauges and application. Our official MAPerformance lanyard included as a special bonus! Also includes interchangeable bezels & faceplates.AEMs legendary Digital Wideband O2 AFR UEGO Gauge is a wideband UEGO air/fuel ratio controller (AFR) and gauge in one.
AEM's Digital Boost Display Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays boost in 1 PSI increments.
AEM Digital Oil Pressure Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays oil pressure in 1 PSI increments.
Standard 52mm (2-1/16) gauge housing
Description
AEMs legendary Digital Wideband O2 AFR UEGO Gauge is a wideband UEGO air/fuel ratio controller (AFR) and gauge in one. It unites accuracy, speed and control with an easy to read, digital LED display and sweeping LED needle that changes colors as AFR changes from rich to lean.
Bosch 4.9 LSU wideband sensor and weld-in bung included (PN 30-4110)
No free air sensor calibration required - ever
Interchangeable black and silver bezels included
Interchangeable black and white faceplates included
52mm (2-1/16) gauge housing
0-5v analog output (10-20 AFR range only)
AEM's Digital Boost Display Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays boost in 1 PSI increments, and a sweeping LED "needle" that lines the edge and moves as boost from 0 to up to 35 PSI. The boost gauge's digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.
AEM Digital Oil Pressure Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays oil pressure in 1 PSI increments, and a sweeping LED "needle" that lines the edge and moves as oil pressure changes from 0 to 150. The oil pressure gauge's digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.
9. AEM 30-0300 X-Series Wideband UEGO AFR Sensor Controller Gauge
Feature
The X-Series Wideband UEGO AFR Sensor Controller Gauge (PN 30-0300) features a modern, visually striking faceplate and new seven-segment center display that is 87% larger than the 30-4110 AEMThe gauge includes a 0-5v and RS232 Serial Port output for feedback control and data logging, and an AEMnet (CANbus) output for data logging
X-Digital wideband technology gives these controllers the ability to read and report values that other controllers do not, which can deliver more optimized engine tuning and a safer overall operating condition
Faster response time improves wideband feedback control, and can provide a safer, more powerful and accurate tune
When tuning an engine using wideband AFR feedback control on an inertia dyno, dead time affects the data you are looking at because it is reported in a different operating location than when it actually occurred
Description
AEM's X-Series Wideband UEGO Air/Fuel Ratio Sensor Controller Gauges are built upon unique, patent-pending X-Digital technology that makes them the fastest responding wideband air/fuel ratio controllers in independent testing against 17 other wideband UEGO air/fuel controllers.10. AEM 3 Gauges Combo Set UEGO WideBand A/F Ratio (30-4110) + Oil Pressure (30-4401) + Turbo Boost (30-4406)
Feature
3 popular AEM gauges in a convenient 3 piece combo set.All gauges are brand new, complete in box.
Set Includes: AEM Wideband UEGO Air/Fuel Ratio Gauge 30-4110, AEM Boost Display Gauge (-30-35PSI) 30-4406, AEM Digital Pressure Display Gauge (0-100 psi) 30-4401
Description
AEMs legendary Digital Wideband O2 AFR UEGO Gauge is a wideband UEGO air/fuel ratio controller (AFR) and gauge in one. It unites accuracy, speed and control with an easy to read, digital LED display and sweeping LED needle that changes colors as AFR changes from rich to lean.
Bosch 4.9 LSU wideband sensor and weld-in bung included (PN 30-4110)
No free air sensor calibration required - ever
Interchangeable black and silver bezels included
Interchangeable black and white faceplates included
52mm (2-1/16) gauge housing
0-5v analog output (10-20 AFR range only)
AEM's Digital Boost Display Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays boost in 1 PSI increments, and a sweeping LED "needle" that lines the edge and moves as boost from 0 to up to 35 PSI. The boost gauge's digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.
AEM Digital Oil Pressure Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays oil pressure in 1 PSI increments, and a sweeping LED "needle" that lines the edge and moves as oil pressure changes from 0 to 150. The oil pressure gauge's digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.
Recent Comments