10 best headset mount for 2018
Finding your suitable headset mount is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best headset mount including detail information and customer reviews. Let’s find out which is your favorite one.
1. The Anchor - THE ORIGINAL Under-Desk Headphone Stand Mount
Feature
Keeps your headphones out of sight & easy to reach.Holds ultra-securely (same 3M adhesive GoPro uses).
Thick premium silicone construction + steel pin inner reinforcement (new)
Lessens cord clutter
Can hold two sets of headphones.
Description
The original under desk headphone mountGet rid of cord clutter on your desk and have easy access to your headphones with the Anchor.
Mounts in seconds and holds ultra-strong with the same adhesive GoPro uses.
Flexible silicone construction protects your headphones and won't hurt if you ever bump it with you knee.
Tip
If you ever need to remove the Anchor and it is holding too strong - just heat it up with a hair dryer and the adhesion will soften.
Mounting Instructions
The 3M VHB (Very High Bond) adhesive will hold with over 40 pounds of adhesion to clean and finished surfaces.
Important: It will not hold to unfinished wood, bare mdf, or if the surface feels fibrous. If the bottom of your desk isn't finished, we recommend either putting some finish on (polyurethane works well) or screwing it in.
Make sure the surface is clean, dry, and oil free.
Firmly press the Anchor to your desk for the best adhesion.
It takes 24 hours for the adhesive to fully cure to max strength.
ElevationLab Guarantee
The Anchor, like all our products, is guaranteed for life to be defect-free. If you have any issues, please contact us so we can make it right.
2. PC Gaming Headset Headphone Hook Holder Hanger Mount, Headphones Stand with Adjustable & Rotating Arm Clamp, Under Desk Design, Universal Fit, Built in Cable Clip Organizer EURPMASK
Feature
🔷UNIVERSAL UNDER DESK DESIGN clamps on to desks up to 37mm thick and as narrow as 7mm for a near universal fit on most desks || Spring Clamp is easy to remove and reattach!🔷ROTATING ADJUSTABLE HEADPHONE ARM swings underneath your desk for discreet & non-intrusive storage and swings back out for easy access.
🔷BUILT IN CABLE LOOP holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs.
🔷SOFT RUBBER PADS located on both clamp ends protect your desk or table from damage || Protects glass, woden & metal desks/tables from damage!
🔷All EURPMASK Products are backed by a 4 Year Manufacturer Warranty.
Description
Great for Desks and Coffee TablesSoft padded contacts eliminate damage to your living room coffee table or your desk. Clamp opens up to accommodate most desks and tables (7mm - 37mm) and forms a tight fit while remaining easy to remove and move to different gaming stations around the house.
-- No bolts, adhesives, or unsightly screws! Just clamp on and off and get back to the game
-- Soft padded contacts keep a strong hold on glass, wood, metal, and more
Under Desk Mount for Discreet Convenient Storage
Fits Desks between 7mm - 37mm
Simply clamp on to your desk or table and clamp off to remove without having to deal with adhesives or hardware
Rotating Hook for Easy Access
Intuitive rotating hanger allows for convenient under desk storage and easy access by swinging the hook forward from under the desk
Soft Pads Eliminate Scuffing
Don't ruin your desk or table with sticky adhesives that leave residue or drill holes with bolts and hardware. Simply clamp on and off
Built in Cable Loop Reduces Desk Clutter
Keep your desk free of loose headsets and avoid taking up even more desk space with pesky on desk headset stands! Store your headsets underneath your desk and feed the cable through the built-in cable loop to reduce cable drag and keep a tidy desk!
-- Built-in cable loop organizes your headsets cable to reduce clutter and keep your desk tidy.
-- Under desk storage reduces desk clutter by increasing the amount of usable desk space.
3. Headphone Stand with USB Charger COZOO Under Desk Headset Holder Mount with 3 Port USB Charging Station and Smart Watch Charging Dock Dual Earphone Hanger Hook for All Headphones
Feature
All in one design: Under-desk headphone stand + 3 USB charging hub(4A/20W)Under-Stand:Keeps your headphones out of sight & easy to reach and Can hold two sets of headphones.
3 Port Smart USB Charger: detects your device automatically to deliver its fastest possible charge speed up to 2.4 amps per port or 4 amps overall.
Safe Guard:Fire-resistant and hardened plastic outer shell for durability, build-in premium circuitry and microchip ensure device safety.
Easy to install - Come with screw and 3M VHB tape, according you need use different ways holds securely under your under desk.
Description
Unique Features: While other headset stands only offer a place to store your headphones, the COZOO Headset Stand is equipped with 3 USB Charging ports, providing easy Charge to your Devices. Fast Charging 4.0 amps output enables the power strip charge 3 devices including your tablets and smartphones simultaneously at full speed, save your time up to 50%. With the smart technology, it can automatically identify the type of device and deliver the suitable current for your device like the original power adapter. Mounting tips: 1.Clean and dry the surface of the desk and the stand before installing. 2.We recommend you wait 24 hours to make the adhesive fully secure so that there is enough adhesive force between the desk and the headphone stand. 3.If hanging weight more than 500g . please install the screws. 4.This adhesive is very sticky with good quality in order to mount steady . If you can't take the adhesive cover off , You can use the hair dryer to heat it and tear it down. Specifications: Material: Fireproof ABS+PC Rated Input: AC 110-240V, 50/60Hz USB Total Output: DC 5V 4.0A (max) Power Cord Length: 6.6ft / 2m Overall Dimensions: 5.1 4 2.4 inchs / 130 x 102 x 60 mm Headband Plate Dimensions: 2 1.2 inchs / 50 x 30 mm each screw Dimensions: 0.16 0.6 inch / 4 15 mm Weight: 5.8oz / 165 g Please Note: The USB ports functions as a USB Charging only, for charging your Phones or Tablets. And it's not as a USB Hub to connect the devices to your computer. Headphone in the picture is not included. If you would like to buy under desk headphone hanger with USB Hub, please refer to this product: www.amazon.com/dp/B07D48GDZ44. Headphone Headset Stand Holder, 6amLifestyle Universal Metal Headphones Hanger Mount Under Desk Hook Clip with Adjustable Clamp for All Headsets, Black
Feature
Made from high quality metal, durable and strong, capable of holding light weight to very heavy headphones without bending or breaking.With locking knob secures nylon tipped screw,Protective EVA foam padding make your stands safe.
No glue, no mess, adjustable design allowing to fit on to desks and tables of different tickness.
Fixed on the desktop or horizontal panel, easy to remove and install.
Lifetime Warranty: All 6amLifestyle products come with 100% lifetime guarantee.
Description
A perfect desk hanger for large or small headphones of almost any weight.Features
Its all metal construction allows it to be both sturdy and stylish, with no chances of it bending when even the heaviest of headphones are placed on it.
A friction locking knob securely locks the nylon tipped screw to the computer desk.
Made of metal with black powder coat finish, unique and stylish design; great for home, office, studio, bedroom.
Unique and stylish, will look good in any setting be it at home, work, school or cyber cafe.
Keeps your headphones handy without clutter. No gawky stands, no clunky mechanisms or screws and NO DAMAGE.
Inside Package:
1 x headphone hanger
Our Guarantee:
We are so confident in ourproducts that we offer a lifetime manufacturer's warranty for defects
Click the Add to Cart Button at the Top of this Page Now to Enjoy !
6amLifestyle, We specializeinFashion, Beauty, Home and Lifestyle and pride ourselves on our ability to work with each client based on their individual needs. We give the best because our clients are the best.
5. Headphone Stand Hanger Wall Mount - Pack of 2 OAPRIRE Acrylic Headphone Holder Hook, Stick-On Gaming Headset Stand with Cable Clips (Black)
Feature
MINIMALIST STYLE: Keeps your headphones out of clutter and easy to reach, Designed for people who appreciate quality, Minimalist style and ultimate versatility.HIGH QUALITY: Headphone stand is made of high-quality acrylic, with high toughness and fall resistance, Smooth edge design keep headphone safe from scratching and dropping.
HOLDS ULTRA-SECURELY: Smooth edge keep headset safe, Same 3M adhesive GoPro uses, Each headphone hanger has 2 tapes attached and cable clips.
CONVENIENT INSTALLATION: Simple to install with no damage and no mess, No tools and no holes in your walls.
COMPATIBLE AND WARRANTY: Universal compatible with all headphones and gaming headset, Every OAPRIRE headphone hook comes with the 12-month warranty, If you care about style, quality and versatility this headphone holder is the best choice.
Description
DESIGN ORIGINAL INTENTION
For those with high-end headphones and gaming headset without enough desk space, looking for an apparatus to proudly display and store their prized headphones beautifully with their listening environment, the high-quality OAPRIRE headset stand is the best choice.
PRODUCT FEATURES
1. High Quality, Headphone hanger is made of high-quality acrylic, absolute sturdy and durable.
2. Headset/headphone wall mount system, Get rid of cord clutter on your desk and have easy access to your headphones.
3. Universal compatible with all headphone and Gaming Headset.
4. Easy Installation, The maximum capacity installed on a flat surface is 2 pounds.
5. Apply more scenarios, Headphone holder is also ideal for a recording studio, game desk, headset store display rack, kids rooms, and dorms.
PACKAGE CONTENT
2 x OAPRIRE Headphone Stand (Headphone Is NOT Included)
4 x 3M Adhesive Strips
2 x Cable Clips
1 x Manual
INSTALLATION GUIDE
1. Clean and dry the flat surface of the installed area and the hook before installing
2. Firmly presses the hook to your installed area ( flat surfaces ) for the best adhesion
3. It takes 24 hours for the adhesive to fully cure to max strength
Tip: If you ever need to remove the headphone stand and it is holding too strong - just heat it up with a hairdryer and the adhesion will soften.
ABOUT OAPRIRE
OAPRIRE share your excellence, technology, fun and easy lifestyle with you.
If you have any issues, please contact us so we can make it right
6. Headset Headphone Mount, 6amLifestyle Aluminum Under Desk Dual Headsets Hanger Holder Stand, Stick-On Hooks Universal for All Headphones, Black (Patented)
Feature
Hold two headset: This Headphone hook can hold two sets of headphones at the same time.Soft - line & Light - Weighted : This Headset mount is made of machined light weighted aluminum, the soft-line can avoid scratching.
Two methods to install: Just install this headset holder under desk by strong 3M VHB two-sided tape on the top or mount with screws for extra strength.
Space-saving storage: This small headset hook help to keep your desk neat and organized.
Universal compatibility: Fit for Beats, Sony, Sennheiser, Philips, Bose, JVC and all other headphones. And it could be used to hold other things such as coiled up cords, lightweight purse, or shopping bag.
Description
Headset Headphone Stand, 6amLifestyle Aluminum Under desk Dual Headsets Hanger Holder Mount, Stick-On Hooks Universal for All Headphones, Black (Patented)7. NZXT BA-PUCKR-B1 Puck - Cable Management and Headset-Mounting Solution
Feature
Designed for Audio or VR headsets and mounting ease Splits apart for extended cable coverage Powerful magnets allow quick and Easy mounting Compact size ideal for mounting on PC case or any magnetic surface Silicone construction ensures flexibility and durabilityDescription
Store VR or audio headsets easily with puck. Its designed for simple, hassle-free cable management for any of your wired accessories. Split puck apart for extended cable coverage while powerful magnets make it easy to mount on your PC case or any magnetic surface.8. BRAINWAVZ Hooka The All Metal Headphone Stand Hanger
Feature
Headphone hanger for vertical surfaces, stylish and strong. Wide seat fits small to large headbands easily.Holds headphones of any weight without bending or losing its shape
Made from high quality metal, durable and strong, capable of holding light weight to very heavy headphones without bending or breaking.
Unique and stylish, will look good in any setting be it at home, work, school or cyber caf.
Smaller than a headphone stand, sturdier than most other comparable desk headphone hangers.
Description
Hooka by Brainwavz, a compact multi purpose design made from die cast aluminum is designed to fit and hang most headphones of any weight. The Hooka maintains its shape and form whilst holding the heaviest of headphones on the market. The specially designed seat on the Hooka has been designed to hold narrow to very wide headbands without the headphones falling off.Solid and dependable, the Hooka affixes onto any wall or surface using a 3M VHB, a strong double sided acrylic foam tape that can hold very heavy loads. The Hooka's simple design and durability makes it a handy solution for your headphone storage solution.
Specifications:
Weight : 125g
Dimensions: 10.2 x 4.6 x 5.8 cm
Material: All-Metal die-cast aluminum
9. Headphone Mount, 6amLifestyle Headset Holder Hanger, Aluminum Under desk Dual Headsets Stand, Stick-On Hooks Universal for All Headphones, Silver (Patented)
Feature
Hold two headset: This Headphone hook can hold two sets of headphones at the same time.Soft - line & Light - Weighted : This Headset mount is made of machined light weighted aluminum, the soft-line can avoid scratching.
Two methods to install: Just install this headset holder under desk by strong 3M VHB two-sided tape on the top or mount with screws for extra strength.
Space-saving storage: Keep your headphones out of sight & easy to reach, ideal for home, work, school or cyber caf.
Universal compatibility: Fit for Beats, Sony, Sennheiser, Philips, Bose, JVC and all other headphones. And it could be used to hold other things such as coiled up cords, lightweight purse, or shopping bag.
Description
Our updated version which comes extra 2 holes and screws has been released6amLifestyle Headphone Stand is a stickup headphone hanger specifically designed to hang not one, but two headphones.
Product Features:
Compact Design
Fashionable and elegant appearance, made up with Aluminum,absolute sturdy and durable.
Lightweight and sturdy
We have our own team, homegrown, quality more secure, whether material or workmanship are first class. And it only 1.3 ounce,you can carry it everywhere.
Easy to install
You can install it to the clean bottom surface of your desk or the side face of your desk.
Save Work Space
Helps you to place your lovely earphones conveniently and allow you to access them easily.
You can also use it to hang some other small items.
Specifications:
Maximum load: 500g
Dimensions: 3.6 x 1.5 x 0.97 inches
Unit Weight: 1.37 ounces
Color: Gray/Silver
Inside Package:
1 x aluminum headphone holder with hole
1 x extra 3M VHB tape
2 x screws
Warm tips:
1.The 3M adhesive tape can't touch oil, dust, soil or other particulate matter,and please keep it away from any heat source,otherwise it may lose stickiness.
2.Clean and dry the surface of the desk and the stand before installing.
3.We recommend you wait 24 hours to make the adhesive fully secure so that there is enough adhesive force between the desk and the headphone stand.
Our Guarantee:
We are so confident in ourproducts that we offer a lifetime manufacturer's warranty for defects
Click the Add to Cart Button at the Top of this Page Now to Enjoy !
6amLifestyle, We specializeinFashion, Beauty, Home and Lifestyle and pride ourselves on our ability to work with each client based on their individual needs. We give the best because our clients are the best.
10. Stick-on Headphone Hooks 2 Pack
Feature
Sticks strongly on almost any clean surface yet EASILY REMOVED WITH NO DAMAGE. 5 pound capacity. (Even the heaviest headphones weigh about 1 pound.)Each hook is mounted using two Scotch 3M DAMAGE FREE REMOVAL Adhesive strips which are included. 3M Command mounting strips have proven reliable in millions of installations.
Keeps your headphones handy without clutter. No awkward stands or obnoxious "prong" forms of cheap monitor hooks. No clunky mechanisms or screws. Not made from silicone or rubber that get dirty and hold germs. Designed for people who appreciate quality, discreet style and ultimate versatility.
Excellent hanger for even large and wide headband headphones. Do not mount on wallpaper, vinyl or damp locations. If you have any problem we will absolutely fix it. GUARANTEED.
Smooth, super strength and hypoallergenic ABS plastic. Do not hold grime or debris like silicone or rubber hooks. For mounting on monitors, computers, desks, inside stereo cabinets, dorms, and office cubicles. Also search Amazon for our UNDER DESK MOUNT and our double width XL HEADPHONE HOOKS.
Recent Comments