10 best baton airsoft for 2018
Finding your suitable baton airsoft is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best baton airsoft including detail information and customer reviews. Let’s find out which is your favorite one.
1. BATON airsoft 11.1 v AEG Li-po Battery (11.1v 1300mAh 40C-20C Mini Type [ for Stock ])
Feature
Size : 3.5" X 1.4" X 0.7" ( 88 mm 35 mm 18 mm )Voltage : 11.1V
Capacity : 1300mAh
Output : 20C ( Mac 40C )
The corresponding battery varies and voltage depending on the maker and type of the AEG.Please be sure to check your AEG's instructions.
Description
High quality and Good price LiPO stick battery for airsoft AEGs2. RYUSOKU Flat Hop-Up Bucking for Airsoft AEGs (Hard)
Feature
" RYUSOKU " is the Airsoft tuning method born in Japan. RYUSOKU realizes strong hop rotation without dropping the initial speed even when heavy bullets are used, extending the flight distance.Package Includes : Hopup Bucking, Hopup Nub
Hard is recommended for BB of 0.25 g or more, soft is recommended for BB less than 0.20 g
Description
[Problems of hop-up system ]If you adjust the hop strongly, the resistance increases and the initial speed drops.
[Rather than pushing BB bullets, rolling and hop rotation.]
RYUSOKU Flat Hop-Up Bucking rolls the BB on the face, not the point, so this can rotate it strongly even if there is little drop in the initial velocity.
3. BATON airsoft Micro Shot [ Compact 40BB 20mm Rail Mount Mounted Launcher ]
Feature
40 Round CapacityShooting range < Effective / Maximum > : 20 / 30 ft
Power Source : Red, Green, Top Gas Powered ( Gas Do Not Included )
Dimensions : 95 x 45 x 50 mm Weight : 182g ( metal )
Built in rail mount, fits all standard 20mm rails
4. BATON airsoft 7.4v AEG Li-po Battery (7.4v 2000mAh 45C-30C Mini type [ for Stock, etc ])
Feature
Size : 3.6" X 1.3" X 0.6" ( 92 mm 32.5 mm 16.5 mm )Voltage : 7.4V
Capacity : 2000mAh
Output : 30C ( Mac 45C )
The corresponding battery varies and voltage depending on the maker and type of the AEG.Please be sure to check your AEG's instructions.
Description
High quality and Good price LiPO stick battery for airsoft AEGs5. BATON airsoft MOSFET with High Efficiency Wiring for Airsoft AEG
Feature
The MOSFET completely turns off the spark of the switch, and the trouble of the switch disappears.Package Includes : FET with Wired , Small Tamiya plug, Large Deans plug, Installation Manual
Dimensions : 18mm * 12mm * 9mm Length : 880mm ( include wire )
Compatibility : For Most Standard Airsoft AEG Rifles
Made in Japan
Description
[Airsoft AEG Rifles spring 90 - 150]Upgrade Spring for AEG Airsoft Guns. Even in the test of 650,000 shots, the spring shrank only 2o change in the initial speed. The spring made in Japan stable and high quality. Length : 88mm Outer diameter : 14.6mm
[We conducted the spring durability test of 650,000 shots !]
We made the test machine for check the durability of BATON spring. And after shooting 650,000 shots, the spring shrank only 2 mm, there was no peeling of plating, initial speed did not change.
6. Flow rate surface hop up packing set (japan import)
Feature
Compatible with standard AEG hop-up chambers and barrelsProvides a more consistent back-spin on BBs
Increases accuracy and range
Boosts FPS
Best used with heavier BBs (0.25 and above)
Description
The Modify Baton Ryusoku Hop Up Bucking is designed to create a more stabilized and consistent back-spin with heavier BBs. The Baton Ryusoku bucking gives your AEG a better air seal, providing a slight increase in FPS. The bucking also comes with a unique flat hop up nub. This gives the BB more surface area to achieve a more stabilized back-spin and significant boost in accuracy and range. Features: Compatible with standard AEG hop-up chambers and barrels Provides a more consistent back-spin on BBs Increases accuracy and range Abrasion and tear resistant Improved air seal Boosts FPS Best used with heavier BBs (0.25 and above) Package Includes: Modify Baton Ryusoku Hop Up Bucking Flat Hop Up Nub7. ACETECH Airsoft Gun 14mm Lighter S Pistol Tracer Unit Glow in Dark
Feature
Supports only green luminous bulletsSupports up to 35PRS
Fully charged battery would last over 22000rounds
FCC, CE, ROHS compliant
Led power indicator / battery power indicator
Description
1. The Lighter S, is a smallect and lightest tracer unit designed for the pistol. 2. Because of its small dimension, it enables users easily to install it into their silencers or airsoft gun hand-guards as long as their inner space is larger than the dimension of Lighter S. (Diameter: 27mm or 1.06 inches, length: 67.3mm or 2.65inches) 3. Lighter S could light up green tracer BBs with very high brightness but lighten red tracer BBs with medium brightness. 4. Do not disassemble the Lighter S to prevent high voltage electrical shock. 5. It automatically switches off under the following conditions: A. Device has idled for 40 minutes B. When the battery power is low, after the power indicator blinks in red color for 3 seconds. 6. Remaining power indicator (flash once per second) A. Green light: high power B. Orange light: medium power C. Red light: low power 7. Do not look straight into the muzzle to check the installation of the device to prevent any accident like mistakenly pulling the trigger or firing the gun. 8. In order to extend the built-in Li-Poly battery life as much as possible, please charge it least once every 2 months.8. BATON airsoft SBD [ to Protect AEG Switch ] (for M4 AEG)
Feature
SBD (Schottky diode) reduces the spark of the switch and extends the life span.Package Includes : SBD ( Attach the connector, cut the wiring to the appropriate length for M4 AEG), Installation Manual
Dimensions : 8mm * 4.5mm * 2mm
Length : 88mm ( include wire )
Compatibility : For Most M4 Airsoft AEG Rifles
Description
[ AEG airsoft guns switch wears with sparks.]By using MOSFET it is possible to completely suppress the spark of the switch. However, in order to use the MOSFET it is necessary to fully disassemble and change the wiring.
By using SBD you can considerably reduce the spark of the switch.
As SBD is mounted on motor, disassembly of gearbox is unnecessary and easy.
[ BATON airosft conducted 20,000 semi-automatic shot tests.]
In order to test the effects of SBD and MOSFET, we made the machine that pulls the trigger rather than full auto and tested it
[ We confirmed reliable switch protection effect not only in MOSFET but also in SBD ]
After 20,000 semi-automatic tests, when using MOSFET, the wear of the switch was completely absent.
SBD also confirmed the same switch protection effect as MOSFET almost.
9. Modify Baton Ryusoku Airsoft Flat Hop Up Bucking w/ Knob SOFT Type
Feature
Efficiently improves the accuracy.Stabilize and extend the trajectory.
Description
Designed in Japan and made in Taiwan. It features stabilizing the hopper and improving the accuracy. Further, based on the Hard Type of MODIFY BATON RYUSOKU HOP UP BUCKING, we did a little bit improvement on the Flat Hop Up Nub. We made the Nub thicker. It allows the adjustment of the trajectory much more, and it would be better for its performance10. Baton Grip Light, Black (Expandable Baton Not Included.)
Feature
Attachment for expandable police batons that provides enhanced weapon retention with a powerful integrated push button LED light.Compatable with ASP and Monadnock expandable police batons with an approximate diameter of one inch.
Easily attached by removing the end cap of the expandable baton, sliding the Baton Grip Light into place on the handle of the baton, and replacing the end cap securely.
Includes the famous Photon Micro Light made by LRI Inc. with a lifetime guarantee. If your LRI product fails for any reason other than battery expiration, return it to LRI Inc. for free repair or replacement.
Proudly made in the USA.
Recent Comments