10 best arduino touchscreen for 2018
Finding your suitable arduino touchscreen is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best arduino touchscreen including detail information and customer reviews. Let’s find out which is your favorite one.
1. Kuman Arduino UNO R3 3.5 inch TFT Touch Screen with SD Card Socket w/Tutorials in CD for Arduino Mega2560 Board SC3A-1
Feature
Arduino 3.5 inch lcd touch screen with a touch pen.Compatible with UNO and Arduino Mega2560 development board directly, no any wiring needed.(SD card with 2560 is not supported)
3.5 inch screen is designed for arduino board modules, 320*480 resolution, better display. No external power supply needed
we offer free tutorial for arduino beginners who can make projects by email via amazon.
High quality 3.5 inch touch screen with better price and good customer service.
Description
Features:This TFT LCD Screen Module with a LCD break , SD card and Flash design. So it's a powerful extension module for your project.
Dimension: 3.5 inch
Controller: ILI9481 or ILI9488 driver(default in random)
Resolution: 480x320
Data bits: 8 - 16
Interface pin number: 37 pin
Distance: 1 mm
Note: There is a film on the LCD, if there is scratch on the film when you receive the item, pls try to remove the film with your finger nail from the corner of the LCD, thanks.
Package include:
1* 3.5 inch TFT touch screen
1* touch pen
1* CD with tutorial
2. Elegoo EL-SM-004 UNO R3 2.8 Inches TFT Touch Screen with SD Card Socket w/All Technical Data in CD for Arduino UNO R3
Feature
Free tutorial in cd, better price, better service. (With technical data)2.8 inches colorful display lcd screen
With touch pen inside, you can use it more easily
Not including the uno R3 controller board and usb cable
We have always cared about the customer experience and improve the product function details
Description
We have the manufacture factory,
making productions and selling by ourselves.
So we can control the quality of our productions by ourselves for you.
Wed like to receive your valuable suggestions for our products and make your idea come true.
Features :
- Color: as shown in the pictures.
- Material: durable hard PCB board and metal.
- 100% brand new and high quality UNO R3 2.8 quot; TFT Touch Screen with SD Card Socket.
- 2.8 inch TFT LCD shield touch screen, with SD card socket.
- Ideal for Arduino Board Module.
Component listing:
1pcs 2.8 Inches TFT LCD Touch Screen
1pcs touch pen
1pcs CD with tutorial
Attention :
The sd card function is unavailable when plugged into Mega 2560 Board Attention:
Elegoo 2.8 TFT Screen cannot be connected with Arduino UNO R3 or Mega 2560 through serial communication like SPI, IIC but only through parallel communication.
3. KOOKYE Mega2560 Board + 3.2" TFT LCD Touch Screen + LCD Shield SD Reader for Arduino 3D Printers and Robotics
Feature
THE MEGA 2560 BOARD--The MEGA 2560 is designed for more complex projects and is compatible with most shields designed for the Uno and the former boards Duemilanove or Diecimila. This gives your projects plenty of room and opportunities.The ATmega2560 on the Mega 2560 comes preprogrammed with a bootloader that allows you to upload new code to it without the use of an external hardware programmer.RECOMMEDNED FOR 3D PRINTERS AND ROBOTICS PROJECTS--With 54 digital I/O pins , 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
3.2'' LCD TOUCH SCREEN--The full color TFT LCD Display has 40pins interface and SD card and Flash reader design.It include a controller ILI9325, it's a support 16bit data interface , easy to drive by many MCU like arduino families, STM32, AVR and 8051. It is designed with a touch controller in it .
3.2'' LCD SCREEN SHILED EXPANSION BOARD--Easy to install. 3.2" TFT LCD extend shield can help you out of the bothers to use other cables. You just need to plug the module to arduino mega 2560 through this shield.
STRONG TECHNICAL SUPPORT--We offer the step-by-step instruction and verified sample code and library package in our KOOKYE website,which can save lot of user's research time and speed up the learning progress. (http://kookye.com/?p=4828)
Description
Detailed Tutorial Link:http://kookye.com/?p=4828
Features:
--Mega2560 Board--
The MEGA 2560 is designed for more complex projects. The ATmega2560 on the Mega 2560 comes preprogrammed with a bootloader that allows you to upload new code to it without the use of an external hardware programmer.
It has 54 digital I/O pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
--3.2'' Full Color TFT Touch Screen--
3.2" TFT LCD Display has 40pins interface and SD card and Flash reader design. It is a powerful and mutilfunctional module for your project.
The touch screen include a controller ILI9325, it's a support 16bit data interface , easy to drive by many MCU like arduino families, STM32, AVR and 8051. It is designed with a touch controller in it and has a wide viewing angle.
The touch IC is XPT2046 , and touch interface is included in the 40 pins breakout. It is the version of product only with touch screen and touch controller.
Since there is sufficient Mega2560 IO, the TFT01 LCD supports 16-bit mode. It is not like using 328S, only can use a set of SD card port or touch screen interface.
--3.2'' LCD Screen Shiled Expansion Board--
3.2" TFT LCD's working voltage is 3.3V, so it can not be used directly on a standard Arduino mainboard, in order to make the TFT01 LCD compatible with standard Arduino board, this TFT Shield was designed.
Package:
1x mega2560 board
1x 3.2" lcd display board
1x 3.2" display board shield
1x usb cable
4. UNO R3 2.8 TFT Touch Screen with SD Card Socket for Arduino Board Module
Feature
Color: as shown in the pictures.Material: durable hard PCB board and metal.
2.8 inch TFT LCD shield touch screen, with SD card socket.
Ideal for Arduino Board Module.
Professional and practical design.
Description
Features- Color: as shown in the pictures.
- Material: durable hard PCB board and metal.
- 100% brand new and high quality UNO R3 2.8 quot; TFT Touch Screen with SD Card Socket.
- 2.8 inch TFT LCD shield touch screen, with SD card socket.
- Ideal for Arduino Board Module.
- Professional and practical design.
--------------------------------------------------------
Package Including
1 * UNO R3 2.8" TFT Touch Screen with SD Card Socket for Arduino Board Module
5. 3.5" TFT 320x480 Touchscreen Breakout Board w/MicroSD Socket - HXD8357D
Feature
Adafruit Part Number: 2050Stock Type: LCDs & Displays >> Graphic TFT
In Stock & Ready to Ship
Description
Add some jazz & pizazz to your project with a color touchscreen LCD. This TFT display is big (3.5" diagonal) bright (6 white-LED backlight) and colorful! 480x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display, and double our 2.8" TFT. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.
This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller.The display can be used in two modes: 8-bit or SPI.For 8-bit mode, you'll need 8 digital data lines and 4 or 5 digital control lines to read and write to the display (12 lines total). SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and d/c) but is slower than 8-bit mode. In addition, 4 pins are required for the touch screen (2 digital, 2 analog) or you can purchase and use our resistive touchscreen controller (not included) to use I2C or SPI .
Of course, we wouldn't just leave you with a datasheet and a "good luck!". Check out our detailed tutorial for wiring, test and example code! For 8-bit interface fans we've written a full open source graphics library that can draw pixels, lines, rectangles, circles, text, and more . For SPI users, we have a library as well , its separate from the 8-bit library since both versions are heavily optimized. We also have a touch screen library that detects x, y and z (pressure) and example code to demonstrate all of it.
Note: Arduino and breadboard not included. TFT and header only.
6. ELEGOO Upgraded 37 in 1 Sensor Modules Kit with Tutorial for Arduino UNO R3 MEGA 2560 Nano 2016 New Version
Feature
Updated from the old version (others): Received great ideas from our customers taken into considerationRemoved the light cup and mercury module which are banned in Europe. (37 sensor kits from other sellers have mercury, please pay attention.)
Removed useless modules like heartbeat sensor, two of the hall sensors, one of the dual-color sensor. Add useful modules like GY-521 accelerometer module, LCD1602 screen, DS3231 real time clock module etc.
Upgraded tutorial only for Arduino UNO R3, UNO, MEGA2560 R3, NANO in CD, listing paper, resistors pack only from Elegoo Team.
100% compatible with Arduino and STM32.
Description
Elegoo Upgraded 37 sensor modules kit is the most useful and highest cost performance sensor kit in Amazon market.
It is 100% suitable for Arduino beginners.
And it is also 100% compatible with Raspberry PI and STM32. But if you want to use it with Raspberry PI and STM32, you may find the tutorial by yourself. We only offer the tutorial for Arduino in our CD.
The kit has only sensor modules, if you want to use it, you will need the wires and controller boards.
Component listing:
1 x Joystick Module
1 x Relay Module
1 x Rotary Encoder Module
1 x DS-3231 RTC Module
1 x Ultrasonic Sensor Module
1 x HC-SR501 PIR sensor Module
1 x Flame Sensor Module
1 x Linear Hall Module
1 x Metal Touch Module
1 x Digital Temperature Module
1 x Big Sound Module
1 x Small Sound Module
1 x RGB LED Module
1 x SMD RGB Module
1 x Two-tone Color Module
1 x 7 Color Flash Module
1 x Laser Emit Module
1 x Shack Module
1 x IR Receiver Module
1 x IR Emission Module
1 x Tilt Switch Module
1 x Button Module
1 x Active Buzzer Module
1 x Passive Buzzer Module
1 x 18B20 temp Module
1 x Photo-resistor Module
1 x Temperature and Humidity Module
1 x GY-521 Module
1 x Photo-interrupter Module
1 x Tap Module
1 x Membrane Switch Module
1 x Avoidance Module
1 x Tracking Module
1 x Magnetic Spring Module
1 x Water Lever Sensor
1 x Power Supply Module WARNING: Pls. do not use the voltage higher than 9V
1 x LCD1602 Module (with pin header)
7. Kuman 5 inch Resistive Touch Screen 800x480 HDMI TFT LCD Display Module with Touch Panel USB Port and Touch Pen for Raspberry Pi 3 2 Model B RPi 1 B B+ A A+ SC5A (5 inch Raspberry Pi Touch Screen)
Feature
5 inch resistive touch screen designed for Raspberry Pi 3 2 Model B RPi 1 B B+ A A+, can't work for Raspberry Pi Zero board.The Module used SSD1963 LCD controller with 5 inch LCD module with touchpad. Job stability of the module with super anti-jamming capability,far beyond driven solutions on the market SSD1963 , SSD1963 interference poor, black and white with crash risk .
This LCD has a superior display quality and super wide viewing angle,it using 8080 timing sequence with 16bit parallel bus interface, resolution 800 480, 16M colours display panel.
The LCD has a SD slot, SPI flash footprint. It's pinout is pin to pin compatible with TFT Shield for arduino MEGA 2560.The TFT LCD Module has embedded Font IC, which contain fonts of 10 sizes and 236 icons.With this LCD module, you will be able to draw bigger and nicer fonts, and also extended ASCII characters too.
We are professional factory on making all electronics components based on Arduino and Raspberry Pi. And we also have processional engineer team to offer you tutorials which you can start from beginning. We have all documents( including code) For all kits from Kuman,Detailed tutorials including project introduction and source code CAN BE PROVIDED FOR FREE,contact us BY Email to get documents.
Description
Tips for driver:After install the driver that could get the touch function work.
1.)Step1, Install Raspbian official mirror
a)Download Raspbian official mirrorlatest version:
https://www.raspberrypi.org/downloads/
b)Use"SDFormatter.exe"to Format your TF Card
c)Use"Win32DiskImager.exe" Burning mirror to TF Card
2.) Step2, Clone my repo onto your pi
sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
3.)Step3, According to your LCD's type, excute:
In case of 5" LCD
sudo ./LCD5-show
If you need to switch back to the traditional HDMI display
sudo ./LCD-hdmi
Wait a few minutes,the system will restart automaticall , enjoy with your LCD
Note: The premise is that raspberry pie is needed to connect to the network.
If you are operating without conecting the network, you need to use the additional methods we provided (The drive files and installation methods are included in CD), or contact our customer service staff.
Features:
1)5.0" TFT LCD Module, Resolution 800x400, SSD1963 Controller
2)LCD Type: TFT Transmissive Normal White super wide viewing angle
3)LCD Panel: HannStar HSD050IDW1
4)Interface: 8/16bit parallel bus interface
5)PCB Color: Blue
6)On board DC-DC Boost regulator TPS61040 to provide power supply to LCD backlight
7)LCD-specificed intialization code is provided, so that you can save time to optimize power control register and gamma curves for best display performance. We have test the provided code, it gives the best display performanace
12)Power Supply is NOT included.
Package Contains:
5inch HDMI LCD x 1
HDMI adaptor x 1
Touch pen x 1
RPi screws pack (4pcs) x 1
8. 7 inch 800x480 TFT LCD Touch Panel Display Module for Arduino AVR STM32 ARM SSD1963
Feature
7.0 inch TFT LCD module, provide a super wide viewing angle800x480 high Resolution, high-quality display performance
Used in all embedded systems, professional and practical
Standard 2x20 2.54mm pin header works perfectly with MCU board
400mA DC-DC Boost regulator provides power supply to LCD backlight
Description
This 7.0inch TFT LCD Module provides high quality colorful image and wide viewing angle.It is practical for users since it can be controlled by MCU such as 51, AVR, STM32, PIC, MSP430, DSP, ARM, and ARM.With touch function, you can operate it faster. And please make sure that all data port voltage cannot exceed 3.6V when you use it.
Specifications:
LCD Type: TFT Transmissive Normal White
Interface: 16bit parallel bus interface
PCB Color: Blue
Module Size: 186*106*23mm / 7.32*4.17*0.9"
Display Size: 154*86mm / 6.06*3.38"
Pixel Pitch: 0.179mmx0.179mm
Package Includes:
1 x LCD Module
9. Elegoo EL-KIT-003 UNO Project Super Starter Kit with Tutorial for Arduino
Feature
Free PDF tutorial(more than 22 lessons) and clear listing in a nice packageThe most economical way to starting Arduino programming for those beginners who are interested
Lcd1602 module with pin header (not need to be soldered by yourself)
This is the upgraded starter kits with power supply module, 9V battery with dc
High quality kite with uno R3, 100 percent compatible with Arduino uno R3
Description
Elegoo Inc. is a professional manufacturer and exporter that is concerned with the design, development production and marketing of arduino, 3d printers, raspberry pi and STM32.
Our Dream is to make the best price and best quality produce for customers.
So we would like to receive your valuable suggestions for our products and we can improve them for you.
Component listing:
1pcs UNO R3 Controller Board
1pcs LCD1602 Module ( with pin header)
1pcs Breadboard Expansion Board
1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V
1pcs Joystick Module
1pcs IR Receiver
1pcs Servo Motor (SG90)
1pcs Stepper Motor
1pcs ULN2003 Stepper Motor Driver Board
1pcs Ultrasonic Sensor
1pcs DHT11 Temperature and Humidity Module
1pcs 9V Battery with DC
1pcs 65 Jumper Wire
1pcs USB Cable
1pcs Active Buzzer
1pcs Passive Buzzer
1pcs Potentiometer
1pcs 5V Relay
1pcs Breadboard
1pcs Remote
1pcs Tilt Switch
5pcs Button (small)
1pcs 1 digit 7-segment Display
1pcs 4 digit 7-segment Display
5pcs Yellow LED
5pcs Blue LED
5pcs Green LED
5pcs Red LED
1pcs RGB LED
2pcs Photoresistor
1pcs Thermistor
2pcs Diode Rectifier (1N4007)
2pcs NPN Transistor (PN2222)
1pcs IC 74HC595
120pcs Resistor
10pcs Female-to-male Dupont Wire
10. 2.8" TFT Touch Shield for Arduino with Resistive Touch Screen
Feature
Adafruit Part Number: 1651Stock Type: Arduino >> Shields >> TFTs & Displays
In Stock & Ready to Ship
Description
Spice up your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection. This TFT display is big (2.8" diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades)! 240x320 pixels with individual pixel control. It has way more resolution than a black and white 128x64 display. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen. ( We also have a capacitive-touch version of this shield here )
We've updated our original v1 shield to an SPI display - its a tiny bit slower but uses a lot less pins and is now much easier to use with Mega & Leonardo. We also include an SPI touchscreen controller so you only need one additional pin to add a high quality touchscreen controller. Even with all the extras, the price is lower thanks to our parts sourcing & engineering skillz!
The shield is fully assembled, tested and ready to go. No wiring, no soldering! Simply plug it in and load up our library - you'll have it running in under 10 minutes! Works best with any classic Arduino (UNO/Duemilanove/Diecimila). Solder three jumpers and you can use it at full speed on a Leonardo or Mega as well.
This display shield has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. This shield needs fewer pins than our v1 shield, so you can connect more sensors, buttons and LEDs: 5 SPI pins for the display, another pin for the SPI touchscreen controller and another pin for uSD card if you want to read images off of it.
Of course, we wouldn't just leave you with a datasheet and a "good luck!" - we've written a full open source graphics library that can draw pixels, lines, rectangles, circles and text. We also have a touch screen library that detects x, y and z (pressure) and example code to demonstrate
Recent Comments